Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.4 LAccepted-AOC OLD DAILY MARKET DIMAPUR 797 112 NAGALAND | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L1 | Accepted-AOC Lowest bid value | |
| 2 | L2₹45.1 L+₹80,503.80 (1.82%)Rejected-AOC HOUSE NO 59 THILIXU VILLAGE BLOCK V PS POST DIMAPUR NAGALAND 797 112 | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L2 | Rejected-AOC Higher bid value | |
| 3 | L3₹45.2 L+₹95,350.55 (2.15%)Rejected-AOC | L3 | Rejected-AOC Higher bid value | |
| 4 | L4₹45.8 L+₹1.5 L (3.40%)Rejected-AOC H NO 400 FLAT NO 13 A SEMATILLA DIMAPUR 797112 NAGALAND | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L4 | Rejected-AOC Higher bid value | |
| 5 | L5₹45.9 L+₹1.6 L (3.70%)Rejected-AOC | L5 | Rejected-AOC Higher bid value |
Tender Value
₹43 L
EMD Value
₹86,000
Closing Date
12 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
SPECIAL REPAIRS TO BLDG NO T55 OF EME BN PROVN OF GATE WITH MISC ITEMS AT TCP II SHED FOR GEN SET WITH HARD STANDING NEAR BLDG NO T30 FPO 02 HARD STANDING AND STAGING NEAR MAIN GATE AND BLDG NO T76 IN C ZONE TILING IN BLDG NO P103 IN GAGAN VIHAR 03 1
2023_MES_587924_2
8527/C/E8
Open Tender
Civil Works
Item Rate
180 days
RANGAPAHAR
Class D, Category a(i)
2 documents required · 2 mandatory
₹500
GE 868 EWS
₹86,000
20 Jun 2023
29 May 2023
14 Jun 2023
29 May 2023
12 Jun 2023
7 Jun 2023
29 May 2023 - 3 Jun 2023
Amount
Dismantling asbestos cement (Corrugated or semi corrugated) sheets in roof covering etc complete all as specified and as directed .
Dismantling wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets etc complete all as specified and as directed .
Dismantling, floor, hearth or wall tiling including cement mortar bedding etc complete all as specified and as directed .
Demolition of reed lathing single or double including battens and plaster or chicken wire lathing etc complete all as specified and as directed .
Dismantling timber scantlings 40 sqcm and over in section, in unframed work any position etc complete all as specified and as directed .
Demolition of cement concrete in ground floors and pavings n.exc 15 cm thick above or below ground level etc complete all as specified and as directed .
Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches etc complete all as specified and as directed .
Taking down Chowkhat or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frames etc complete all as specified and as directed .
Taking down shutters of any description not exceeding 1 Sqm each etc complete all as specified and as directed .
Dismantling boarding of any description and fixed in any position fixed with nails or screws etc complete all as specified and as directed .
S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws etc complete all as specified and as directed .
S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed .
M&L for rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E 250) quality-A etc complete all as specified and directed.
S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-primetered self embossed, textured designer board E-Board Classic to be fixed GI grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mm duly suspended with 2mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size and finally applying two coats of oil bound distemper etc complete all as specified and as directed .
S&F Non skid ceramic floor tiles of 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6) set and jointed in neat cement slurry and pointed in coloured cement etc complete all as specified and as directed .
All as per item No 15 here-i-nbefore but in skirting including 10mm thick plastering for backing coat in cement mortar 1:4 etc complete all as specified and as directed .
S & F second class hardwood weather boarding, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps etc complete all as specified and as directed .
M&L for second class hardwood as in scantlings clean sawn timber fixed etc complete all as specified and as directed .
M & L for plain fillets, square, rectangular or triangular in section clean sawn, secured with nails 2nd class hard wood exc 13 and n.exc 25 sqcm etc complete all as specified and as directed .
S & F 125x60 mm Pressed steel frames1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete as specified and directed.
M&L for 35 mm thick 2nd class hardwood plain framed factory made pannelled shutter (any number of panels) with panels of timber flat on both sides or supplied and fitted to chowkats etc complete all as specified and as directed .
S &F 35mm thick 2nd class hardwood glazed and skeleton shutters factory made open rebated and prepared to receive glass gauze etc divided into squares, with plain, chamfered or rounded mitred and rebated sash bars any number edges of framing plain, chamfered or rounded, fitted with cut and metered beads for securing glass etc size of members of shutters as specified in SSR Part I Sec 8 clause 8.23 (a) etc complete all as specified and as directed .
S&F 30 mm thick 2nd hardwood glazed and skeleton factory made window and ventilator shutters, 30mm thick, open rebated and prepared to receive glass, gauze, etc. (with and without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (b) etc complete all as specified and as directed .
M&L for sheet glass 3mm thick ordinary quality, pin headed type and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane etc complete all as specified and as directed .
S&F mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 18mm, fixed with tinned tacks or galvanized wire staples etc complete all as specified and as directed .
S & F 100 size stainless steel butt hinges etc complete all as specified and as directed .
S & F 75 size stainless steel butt hinges complete all as specified and directed
S & F 150 mm Aluminium handles, cast type, anodised etc complete all as specified and as directed .
S & F 100 mm Aluminium handles, cast type, anodised etc complete all as specified and as directed .
S & F 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and as directed .
S & F 200 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and as directed .
S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed etc complete all as specified and as directed .
S&F mild steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and as directed .
S & F floor door stopper of aluminium alloy body and tongue, anodised wit hard drawn steel spring, fixed in floor, overall length of cover plate 150mm etc complete all as specified and as directed .
M&L for rendering 15 mm thick in CM 1:4 on one side of lathing finished even and smooth without using extra cement etc complete all as specified and as directed .
M&L for rendering 12 mm thick in CM 1:6 on other side of lathing finished even and smooth without using extra cement etc complete all as specified and as directed .
S & F 0.71 mm dia wire netting of galvanised steel wire of size 12 mm mesh fixed with tinned tack of wire staple etc complete all as specified and as directed .
M&L for brick work with sub class 'B' bricksstraight or curved on plan exc. 6.00m meanradius built in cement mortor 1:6 etc complete all as specified and as directed .
Material & labour for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 etc complete all as specified and as directed .
Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar etc complete all as specified and as directed .
M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished fair and even without using extra cement etc complete all as specified and as directed .
M&L for rendering 15mm thick in CM 1:4 other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement etc complete all as specified and as directed .
M&L for preparation of new wooden fillets surfaces and wood based surfaces of any description not exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink wood primer. in tint as etc complete all as specified and as directed .
M&L for preparation of old painted wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint in any tint etc complete all as specified and as directed .
All as per item No 44.00 here in before but applying two coats of synthetic enamel paint over a coat of pink wood primer on new surfaces etc complete all as specified and as directed .
M&L for preparation of new surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of redoxide on new surfaces in any tint etc complete all as specified and as directed .
M&L for applying two coats of oil bound distemper on new plastered surfaces of walls over a coat of 3mm thick wall care putty incl preparation of surface etc complete all as specified and as directed .
M &L for preparation of old decorated surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying one coat of oil bound distemper of approved shade/tint etc complete all as specified and as directed .
Material and labour for preparation of new external surfaces of walls including cornices, pilaster etc (Plastered or un plastered surfaces) and applying two coats of cement paint over one coat of primer complete all as per manufacture instructions all as specified and as diredted by Engineer-in-Charge .
Material and labour for preparation of old external surfaces of walls including cornices, pilaster etc (Plastered or un plastered surfaces) and applying one coat of cement paint including complete removal of existing surfaces all as per manufacture instructions all as specified and as diredted by Engineer-in-Charge .
S & F 4mm thick Plain mild steel wire, galvanised class 3, in detached work such as for mosquito nets and fixing to straining bolts, hooks, eyes, etc. fixed in repairs complete all as specified and directed.
S & F in repairs for Draperly rod/Harrison rails of CP of 20 mm dia with fixing brackets, Stops rollers and rings etc complete all as specified and as directed .
M/L for 75 mm thick PCC 1:3:6 type C2 , using 40 mm graded stone aggregate in plinth protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide tha area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.
M & L for cement concrete type C-2, (1:3:6) (40mm graded stone aggregates) as in surface channels and drains etc complete all as specified and as directed .
M & L for Extra forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement etc complete all as specified and as directed .
S&F anodised aluminium powder coated any colour frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed .
S&F for steel window/ventilator with side hung shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bars devetailed or welded etc complete all as specified and as directed .
S&F Sheet glass 4.8mm thick clear/sun shade colour glass, ordinary quality and glazing with oil putty in squares exceeding 0.5sqm in each pane etc complete all as specified and as directed .
S& F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed .
M&L for hardcore of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammmed to a true surface etc complete all as specified and as directed .
M&L Cement concrete Type D2 1:4:8 (40 mm graded stone aggregate in foundations ,filling and mass concrete complete all as specified and as directed.
M&L cement concrete 1:2:4, type B1(20mm graded stone aggregate) as in coping, kerb etc including necessary form work etc complete all as specified and as directed .
M&L for glazed ceremic tiles 200x300x7 mm in dado set & jointed in neat cement slurry and pointed in coloured cement to match coloure of tiles laid over and including 10mm thick cement mortar 1:4 for fixing of tile complete all as specified and directed.
M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
M&L PCC 1:3:6 type D-2 75mm thick using 40 mm graded stone aggregate as in sub base of floor etc complete all as specified and as directed .
Form work to sides of concrete fdn footing base of columns and raft beams sides and soffits (if any) of plinth beams etc complete all as specified and as directed .
Form work to sides of pillars, posts, struts, pier, columns square, rectangular or polygonal rough finished surface of concrete etc complete all as specified and as directed .
M&L for RCC M-25 design mix using 20mm graded stone aggregate as in foundation, including raft, footing fdn beams plinth beams bases for columns etc complete all as specified and as directed .
M&L for RCC M-25 design mix using 20mm graded stone aggregate as in columns , pillars, piers, posts and struts etc complete all as specified and as directed .
M&L for TMT bars (Fe 500),10 mm dia and over in reinforcement cut to length, bent to shape required incl bending spirally cranking, hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips, etc complete all as specified and as directed .
M&L for TMT bars (Fe 500), 5mm dia and over upto incl 10mm dia stirrups bending spirally or hooping for columns, hooking ends and binding with mild sleet wire not less than 0.90mm dia complete all as specified and directed.
M&L for framed work as in doors and gates of angle or other section including stringers, braces etc complete drilled for fixing of steel sheeting or other coverings to doors and arches etc all as specified and directed by Engr-in -Charge .
Supply only 25 mm bore GI pipe medium grade etc complete all as specified and as directed .
M&L for 20mm thick Granite (of any type) tiles machine cut in skirting/dado laid over and including 15 mm thick CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type complete all as specified and directed
M&L 40 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone agg) as damp proof course to horizontal or vertical surfaces including necessary form works, applying evenly a coat of blown type bitumen at 1.50 kg per sqm and blinding with clean dry sand @ 0.05 cum per sqm including 150 micron thick polythene film laid on a coat of bitumen primer @ 0.30 to 0.50 kg per sqm etc complete all as specified and as directed .
M&L for Plastering 10mm thick in CM 1:4 on fair face of brick work or concrete surfaces finished etc complete all as specified and as directed .
S&F broken glass coping in CM 1:3 on top of walls etc complete all as specified and as directed .
Surface excavation not exceeding 15 cm average depth and getting out in Soft/loose soil etc complete all as specified and as directed .
M&L for shingle filling for laying interlocking pavers complete all as specified and directed.
M&L for 80 mm thick precast PCC interlocking coloured paver rubber moulded block factory made of grade M 40 single layer monolithic high density manufactured by electro vibro hydraulically operated block making maching conforming to IS -15658- 2006 laid and jointed over 25mm thick sand cushion layer with grey cement and no pigment complete all as specified and directed.
M&L for Pre-cast cement concrete kerb stone 1:2:4 type B-1 (using 20mm graded stone aggregate) required sizes incl jointed pointed in cement mortar 1:4 embeding in the ground to a depth as indicated taping earth arround kerb stone and also romovig surplus soil etc complete all as specified and directed .
S&F steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming Fe 410W (Gde-E-250) quality-A complete all as specified and directed.
S&F Stainless steel 300mm wide and height of letter not exc 400mm made up of 1mm thick sheet with hanging arrangment on MS Plate finishes arch approx 5mtr heigh complete all as specified and directed by Engr in Charge.
Excavation in post holes (or similar holes) each n.exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50 m and making good surface complete all as specified and directed.
M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation etc and mass concrete etc complete all as specified and as directed .
M&L PCC 1:3:6 type C-2 using 40mm graded stone aggregate100mm thick as in sub base of floor etc complete all as specified and as directed .
M&L PCC 1:2:4 type B-2 using 40mm graded stone aggregate 75mm thick as in finishing surfaces of concrete topping even and fair (without using extra cement) of floor etc complete all as specified and as directed .
S&F for Steel work in tubular trusses, post, purlin including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade st 240 complete all as specified and directed by Engineer-in-Charge
S&F for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 25cm long 16 to 20mm dia of neck etc complete all as specified and as directed .
S&F framed brackets of angles or tees with web and flanges cut to shape drilled and countersunk for screws, including bending and welding angles, as necessary, gusset plates, riveting, etc n exc 10 kg each brackets, conforming to Fe- 290. Gde -E-165 complete all as specified and directed
S&F Non skid ceramic floor tiles of 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but n.exc 0.38 sqm in floors etc with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6) set and jointed in neat cement slurry and pointed in coloured cement etc complete all as specified and as directed .
All as per item No 91 here-in-before but on vertical surfaces such as skirting, dado risers to steps over and including 10 mm thick bedding layer in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement etc complete all as specified and as directed .
Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/ buzzer, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good to the disturbed surfaces of walls, ceiling, floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed.
M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at site complete all as specified and as directed.
(a) One light/Fan point controlled by one, one way switch .
(b) One 3 pin socket outlet 5 Amps on the same board with other switches.
(c) One 3 pin socket outlet 5 Amps on the switch socket combination.
All as per item No- 94.00 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly etc complete all as specified and as directed.
M&L for Switch piano flush type single pole, one way 5A etc complete all as specified and as directed.
M&L for Socket outlet, 2 in 1, 5 pin 5A flush type etc complete all as specified and as directed.
M&L for Switch Socket combination, 2 in 1, 5 pin 6A flush type etc complete all as specified and as directed.
M&L for Switch Socket combination, 2 in 1, 5 pin 6A/16A flush type etc complete all as specified and as directed.
M&L for stepped type electronic fan regulator 100 Watt socket size flush type on the existing phenolic laminated sheet etc complete all as specified and as directed.
M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock complete all as specified and directed.
Taking down existing burnt aluminium/ copper sub main wiring and M&L for sub main wiring with two runs of 4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- two runs of 4 Sq mm + one run of 4 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length
Taking down S&F for , IP>= 20, Class-I, LED Light fitting 1 x 20 watt (4 Ft), 240 V, PF-0.9, CRI >= 80, CT>= 6500 K, Wall/ Surface mounted, intergrated type with all accessories internally prewired and incl connecting up with and incl twin/ three core twisted flexible copper conductor cable of suitable size in and incl flexible hose from ceiling rose to fitting complete all as specified and as directed.
Taking down Supply , fixing and testing in replacement of LED Bldg Security light fitting of capacity 20 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.2 mtr GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling of holes as reqd and connecting up with flexible copper cable of size 0.75 sqmm 3 core from ceiling rose to the light fitting and all as specified and directed by Engr-in-Charge.
Supply and fixing LED luminaire 600 mm x 600 mm, 40/42 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size etc complete all as specified and as directed.
M&L for MCB Distribution board double door type SPN 12 way, sheet steel, powder painted, with neutral link & earth bar etc. and fixing MCBs of various rating capacity including taking down old unsv MCB DBs complete all as specified and as directed.
M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with neutral link & earth bar etc. and fixing MCBs of various rating capacity including taking down old unsv MCB DBs complete all as specified and as directed.
M&L for MCB TPN 40-100 Amps 10KA, 'C' series, 415 volts, 50 Hz suitable for fixing in MCB DB incl taking down old unsv MCB etc complete all as specified and as directed.
M&L for MCB SPN 40-63 Amps 10KA 'C' series, 230 volts, 50 Hz suitable for fixing in MCB DB incl taking down old unsv MCB complete all as specified and as directed
M&L for MCB SP 40 Amps 10KA, 'C' series, 230 volts, 50 Hz suitable for fixing in MCB DB incl taking down old unsv MCB complete all as specified and as directed.
M&L for MCB SP 6-32 Amps 10KA, 'C' series, 230 volts, 50 Hz suitable for fixing in MCB DB incl taking down old unsv MCB complete all as specified and as directed.
Taking down Ceiling fan/ Exhaust Fan of any sweep carefully from its installed position, dismantling complete, cleaning all dust, applying grease for bearing, including filling cavaties with filler, after cleaning all dust, reassembling the fan and blades, hanging/ fixing the fan in its original position and testing on completion complete all as specified and as directed.
M&L for rubber bush with clamping set, comprising GI bolt, nut and split pin complete all as specified and as directed.
M&L for replacement of capacitor 2.5 Mfd incl making electrical connection complete all as specified and as directed.
M&L for replacement of steel ball bearing/bush of suitable size compatible to the existing ceiling fan complete all as specified and as directed.
M&L for copper rewinding for suitable size complete to the existing ceiling fan/Exhaust Fan etc complete all as specified and as directed.
Taking down LT UG cable/ service connection of any size and M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 16 sq mm, 4 core complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out in soft/ loose soil complete all as specified ans as directed.
Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm thick all complete all as specified ans as directed.
Removing of excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all complete all as specified ans as directed.
M&L for spread fine river sand in trenches complete all as specified ans as directed. NOTE: For measurement purpose, punned down thickness shall only be taken.
M&L for laying brick sub class 'B' old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and as directed
Supply & laying tubes 'light grade' galvanised, with all fittings, fixed complete to walls, poles, ceilings or laid in floors/ trenches/ road crossing for protection of cables of size 40 mm dia bore including taking out unsv GI tubing complete all as specified and as directed.
M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia as earth lead connectd by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I, including testing on completion complete all as specified and as directed.
M&L for sub main wiring with two runs of 6.00 Sq mm and one run of 6.00 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- two runs of 6.00 Sq mm + one run of 6.00 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length .
S&F installation and testing and commissioning of Split type inverter Air conditioner of capacity 1.5 ton rating 5 star with cordless remote operated on 230 Volt AC supply complete to wall with suitable bracket for indoor outdoor unit and connected with electric suply, testing on full load complete all as specified and directed. Make : Voltas/Blue star/Godrej/LG
Supply and ffixing Voltage stablizer for automatic operation single phase indoor type and designed for input variation between 90-300 volts with digital disply out put voltage stabliser at 230 Volts with energy of± 2.5 % and of capacity 5 KVA etc complete all as specified and as directed. Make Microtech/Volina/V-guard/Voltas
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc etc complete all as specified and as directed. Make-Havells/Bajaj or equivalent as approved by GE.
Supply and laying tubes Medium grade galvanised GI tubing with all fittings, fixed complete to walls/poles/laid in floors/trenchs/road crossing of size 15 mm dia bore including complete all as specified and as directed.
Supply and laying tubes Medium grade galvanised GI tubing with all fittings, fixed complete to walls/poles/laid in floors/trenchs/road crossing of size 20mm dia bore including complete all as specified and as directed.
S&F Stop valves, cast copper alloy, fancy type, chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as per specified and as directed.
S&F 15mm bore Bib tap fancy type chromium plated with long shank all as per specified and as directed.
M&L for MCB Distribution board double door type SPN 4 way, sheet steel, powder painted, with neutral link & earth bar etc. and fixing MCBs of various rating capacity including taking down old unsv MCB DBs complete all as specified and as directed.
M&L for MCB Distribution board Single door type SPN 2 way with 200 amps rated bus bar, sheet steel, powder painted, with neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed.
M&L for metal clad AC socket point single pole and neutral enclosure with a tow pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and as directed.
Supply and fixing MCB SPN 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.
Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including4mm suspension wire, one twin core cable flat or circular of dia 6 sqmm etc complete all as specified and as directed.
Shri Atoshe Tuccu
KAILASH KUMAR LADHA
M/S ARVIND GROUP OF CONSTRUCTION & INFRASTRUCTURE
M/s Phoenix Constructions
M/S SANGITA TRADERS
M/S MUNGA LAL PRASAD
VIHUTO YEPTHO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .