Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.4 LAccepted-AOC H NO 111 553 64 CATTLE POUND TOWARDS AVA HILL CAMP ROAD ARUVANKADU NILGIRIS DIST TAMIL NADU 643 202 | THE NILGIRIS | TAMIL NADU | 643202 | L1 | Accepted-AOC Admitted | |
| 2 | L2₹35.5 L+₹2.1 L (6.16%)Rejected-Finance C 234 ADG P CHENNAI | L2 | Rejected-Finance Being Not the Lowest Tenderer | |
| 3 | L3₹37.5 L+₹4.1 L (12.2%)Rejected-Finance ASHOKA PARK PALLAVA PARK BVT INS VISHWAKARMA INDIAN NAVY OF GE ND VISAKHAPATNAM | L3 | Rejected-Finance Being Not the Lowest Tenderer | |
| 4 | L4₹38.0 L+₹4.6 L (13.7%)Rejected-Finance IV 54 DIVYA COMPLEX RAJEEV NAGAR BOY S COMPANY ARUVANKADU THE NILGIRIS 643202 | ARUVANKADU | THE NILGIRIS | TAMIL NADU | 643202 | L4 | Rejected-Finance Being Not the Lowest Tenderer | |
| 5 | L5₹41.3 L+₹7.8 L (23.4%)Rejected-Finance | L5 | Rejected-Finance Being Not the Lowest Tenderer |
Tender Value
₹42.5 L
EMD Value
₹85,000
Closing Date
1 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Wellington
Garrison Engineer Wellington Barrack Post Nilgiris Pin code-643231
PROVISION OF 1 X CLASS CUM LECTURE POST CLP AT ROPERIA TRG AREA OF MRC WELLINGTON UNDER GE WELLINGTON
2024_MES_645657_1
8888/E8
Open Tender
Civil Works
Item Rate
120 days
Wellington
As per Tender Documents
4 documents required · 4 mandatory
₹500
GE Wellington
₹85,000
Yes
11 Dec 2024
8 Mar 2024
6 Apr 2024
9 Mar 2024
1 Apr 2024
18 Mar 2024
Amount
Earth work in excavation over areas by mechanical means (Hydraulic excavator) in any kind of soil (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out complete all as specified and directed.
Plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concreting, complete all as specified and directed.
Reinforced cement concrete M-25 design Mix using 20mm graded stone agregate as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc, basement slabs, under reamed piles and mass concrete all as specified and directed.
Reinforced cement concrete M-25 design mix using 20 mm graded stone aggregate as in walls, retaining walls, basement walls, ballast wall and the like, any thickness, above top of footings including attached pilasters and buttresses all as specified and directed.
Use and waste of formwork to sides of concrete foundations, footings, base of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work; vertical or to batter flat surface rough finished complete all as specified and directed.
Use and waste of formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillaster, buttresses etc, vertical or batter rough finished flat surfaces of concrete all as specified and directed.
Mild steel TMT bars 6 to 8mm dia cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips in stirrups, spacers, binders, etc complete all as specified and directed.
PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, fixed to walls all as specified and directed.
Hand packing broken stone aggregate (any thickness) at back of walls over arches etc and raising (or lowering) to the required level all as specified and directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick each, complete all as specified and directed
Preparing new surfaces of walls and applying two coats of cement wash with Portland cement slurry to a smooth bodied opaque finish complete all as specified and directed.
Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound grade 'A' complete all as specified and as directed.
Surface excavation not exceeding 30cm deep and averaging 15 cm deep and getting out as in hard/ dense soil complete all as specified and directed.
Hardcore of broken stone or boulders of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 150mm thick, watered and rammed to a true surface all as specified and directed.
Plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base to floor 75mm thick all as specified and directed.
Plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in floor 75mm thick all as specified and directed.
Plain cement conncrete 1:2:4, type B-0 using 12.50mm graded stone aggregates in floor 40mm thick finished even and smooth without using extra cement complete all as specified and directed.
Excavating in post holes (or similar holes) each in hard / dense soil not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removal of excavated materials to a distance not exceeding 50mtr and making good surfaces, complete all as specified and directed.
Pre-cast cement concrete block masnory with solid block type C1 1:3:6 using 20mm graded aggregate exceeding 10cm in width and setting in mortar 1:6 complete all as specified and directed.
Rendering 15mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 finished even and smooth (without using extra cement) all as specified and as directed.
Steel work in square/rectangualr tubular trusses/vertical members/purlins etc. including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240 etc con- forming to Fe.290.Gde-E-165 including painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication all as specified and directed.
Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment con- forming to Fe.410.Gde-E-250 all as specified and directed.
Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws all as specified and directed.
Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet as in ridge of 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering and on chajjas fixed with self tapping screws all as specified and directed.
Chequered cement concrete coloured tiles 20 cm x 20 cm x 25 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors, steps etc over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.
Removing excavated soil/ material to a distance exceeeding 250m and not exceeding 500m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
Moorum/ red bajri filling in floors or pavings, laid in layers not exceeding 15 cm thick, spread, levelled and rammed including watering all as specified and directed.
Preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and directed.
Applying two coats of cement based paint, over a coat of alkali resistant primer including preparation of newly plastered surfaces complete all as specified and as directed.
PCC 1:2:4 type - B1 (using 20mm graded stone aggregate) as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts including necessary form work complete all as specified and directed
Glass dividing strips, 3 mm thick and 28 mm in width inserted in position complete all as specified and as directed.
GMS Builders
Sree Constructions
m/s prabakaran
KENZ CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .