CERTAIN REPAIR/ REPLACEMENT OF B/R WORKS AT MD ACCN IN ZONE-V UNDER AGE B/R-IV OF GE (SOUTH) MEERUT CANTT

Taking down chowkhats or frame exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutters without taking off shutters from the frame, complete

Taking down chowkhats or frame not exceeding 1.5 Sqm each with shutters without taking off shutters from the frame complete

Taking down of shutter of any description exc. 1 Sqm & n.exc. 2 Sqm each complete all as specified and directed .

Factory made pressed steel frames, conforming to IS, having profile 125 mm x 60 mm for doors with one or more rebates made out of 1.25 mm thick mild steel sheet, including necessary fixing lugs, butt hinges, lock strike plate, etc, complete, as specified, supplied and fixed

Factory made pressed steel frames, conforming to IS, having profile 105 mm x 60 mm for doors with one or more rebates made out of 1.25 mm thick mild steel sheet, including necessary fixing lugs, butt hinges, lock strike plate, etc, complete, as specified, supplied and fixed

Supply & fix second class hardwood (SAL) as in plain solid straight chowkats or frames, wrought, rafter, purlins and like truss work etc framed together with glue pinned at joints, with single or double rebates or as in perlins, rafters etc complete all as specified and directed.

S&F for flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, 30 mm thick, ISI marked, complete all as specified.

S&f 2nd class hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (including MS Hold Fast). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as specified & directed.

S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

S&F for Solid PVC Door frame of size 50mm x 47mm made out of 5mm PVC sheet reinforced suitable for solid PVC door suppling & fixing in opening, complete all as specified.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, & joined together with solvent cement, in the frame at site as per specification & drawing complete all as specified and directed.

S&F Butt hinges, medium weight, cold rolled mild steel and fixed with screws or with welding to existing MS frames, 100 mm size, ISI marked, complete all as specified.

S&F Stainless steel butt hinges 100mm in size complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section incl necessary screws complete all as specified and directed.

S&F Aluminium handles 125mm size, cast type, anodised incl necessary screws complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt 250mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed ISI marked complete all as specified.

Supply and fixing of mild steel 300mm, ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed

S&F in repair Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F Galvanized MS wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.14mm and including fixed with wooden beading for securing wire gauge with wire stappler complete all as specified.

S&F as in repair galvanized MS wire cloth 0.45mm nominal dia of wire and average width of aperture 1.14mm and including fixed with tinned tacks, wooden beading, Metal frame for securing wire gauge with wire stappler complete all as specified.

Material & labour for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed .

Material & labour for preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in repair Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Hacking out old broken glass ( any thickness, size, quality or discription) from metal/wooden frames fixed with pin, beading or oil putty

S&F 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.

S&F as in Figured glass, 3 mm thick, pin head type and glazing with oil putty in squares not exceeding 0.5 sq. m in each pane, complete all as specified and directed.

Supply & fix in repair 25mm dia Vista pattern of approved colour & finish fancy type curtain rod including brackets and fancy type end knobs, rings etc complete all as specified & directed.

M&L for in repair, 18/19mm thick WPC Solid board, interior grade, prelaminated one side with decorative choice laminations and other side balanceing white lamination, fixed with SS screws to WPC frame work in cup boards, and kitchen cabinet rebated including 75 mm brass finished handles on each shutter and hydraulic hinges fixed with SS Screws complete all as specified and directed.

Material & Labour for repair to 18/19 mm thick prelaminated particle boards, grade 2 quality, interior grade, commercial type fixed with nails to timber frame work (including repair/replacement of damaged wooden frame as required at site) as in cupboard shelves, kitchen, cupboards door shutters, cabinets, shoe racks and like etc including telescopic slider, handles, hinges and other accessories as required to repair/replacement at site as in repair complete all as specified and directed.

Supply & fix in repair 20mm stainless steel rod including brackets / screws etc for cupboard complete all as specified & directed.

Material & labour for non skid coloured tiles of size 600x600x8-10mm thick, coloured, in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) including Dismantling of old tiles complete all as specified & directed.

Material & labour for non skid coloured tiles of size 600x600x8-10mm thick, coloured, in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in dados / skirting over and including 10mm thick rendering in CM (1:6) including Dismantling of old tiles complete all as specified & directed.

Material & labour for non-skid coloured ceramic tiles of size 400x400x7-8mm thick, in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) including dismantling of old tiles complete all as specified & directed.

Material & labour for non-skid coloured ceramic tiles of size 400x400x7-8mm thick, in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in dado / skirting over and including 10mm thick rendering of CM (1:6) including dismantling of old tiles complete all as specified & directed.

Material & labour for glazed coloured ceramic tiles of size 450x300x7-8mm thick, on vertical surfaces set and jointed in neat cement slurry and pointed in white/ coloured cement to match with existing work over and including 10mm thick rendering in CM 1:6 including dismantling of old tiles complete all as specified & directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid and pointed in any mortor etc.

M&L for 14 to 16mm thick Udaipur Green Stone, polished (table rubbed and polished) as in jambs, window cills, cooking platform and the like etc in cement mortar 1:4 including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 including rounding of edges, making hole for gas pipe complete all as specified and directed.

M&L for 20mm thick Granite (of any type) tiles machine cut, infloor, wall, kitchen platform, and window jambs etc. bedded laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing screed bed 15 mm thick CM 1:3 complete

Demolition of plain cement concrete in ground floor and paving n.exc 15cm thickness below or above ground level

M&L for PCC 1:3:6 type C1 , 50 mm thick (20 mm graded stone aggs) as in plinth protection including finished surfaces even and smooth without using extra cement complete all as specified.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified.

Material and labour for brick work with burnt brick of straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed.

Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces finished even and fair on walls in cement mortar (1:4), complete all as specified.

Material and labour for 12 mm thick rendering in Cement mortar 1:6 on brick or concrete surfaces finished even and smooth without using extra cement

M&L for rendering 10 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling/chajja in cement mortar (1:3), complete all as specified.

M&L for preparation of New wall plaster surfaces and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed

Materials & labour for perparation of new wall surface and finishing the surfaces of wall with Birla/J K wall putty and applying two coat of Oil Bound distemper, any colour, complete all as specified & directed.

M&L for three coats of white washing on new ceiling/chajja surfaces including preparation of complete all as specified.

Material & labour for in preparation of old white wash surfaces and applying one coat of white wash on ceiling all as specified and directed by Engr-In-Charge. .

M&L for preparation of existing walls and applying one coat of oil bound distemper incl repair work like putty, plaster and preparation of required area with primer or extra coat of OBD to merge with existing area of OBD as per requrement on walls including Washing, rubbing down and stopping of distempered, painted surfaces on walls all as specified

M&L for preparation old wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

M&L for preparation of old or previously untreated steel surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified & directed.

Material and labour for repairing of old wooden doors by repairing projecting/friction type hinges,handle, bolts etc as required and providing new as required complete all as specified and directed.

Supply & fixing in rotational moulded polyethylene water storage tanks 500 liters capacity, (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings all as specified including 20 mm PVC ball valve including dismantling existing water tanks complete all as specified & directed.

Supply & fix 15 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including Taking up or down GI steel tubing, testing complete all as specified & directed.

Supply, fix 20mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including Taking up or down GI steel tubing, testing complete all as specified & directed.

Taking up or down 15 mm dia steel tubing and connection including cleaning for re-fixing or removal from site complete all as specified and directed

Supplying and laying of CPVC pipes 15mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors,including all fitttings complete all as specified. complete all as specified and directed

Material &Labour for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges and cutting chases for concealed water tubing, and making good, cutting not exc 10 cm girth.

S&F in repair Glass Corner Shelf fitted in wall with screws complete all as specified and directed

S&F as in repair 15mm bore pillar tap, long shank, swan neck, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts complete all as specified & directed.

S&F as in repair 15 mm bore bib tap long body chromium plated, cast copper alloy, with crutch or butterfly handle, flange, screwed down for iron pipe or for brass ferrule, complete all as specified and directed.

Supply & fix in repair wall mixer telephonic with crutch brass chromium plated for mixing hot and cold water screwed for iron pipe suitable for 15mm bore pipes with telephonic with crutch (Provision for hand shower) complete all as specified and directed.

S&F as in repair chromium plated Angle stop valve incl flange, any description, suitable for 15 mm bore pipe,complete all as specified.

S&F as in repair vitreous china squatting pan Orissa pattern, size 580 x 440mm, white, with integral footrest, including flushing cistern & flush pipe fixed as in repair with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface complete all as specified and directed.

S&F as in repair vitreous china wash down water closet pan (pedestal pattern), excluding white (flushing cistern and flush pipe) fixed with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface complete all as specified and directed.

Supply and fixing as in repair PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor. complete all as specified.

Supply & fix in repair white plastic seat cover for W.C.(E.T.) white including M.S. CP or aluminium hinging device complete all as specified and directed.

S&F as in repair Vitreous China wash basin, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified.

Supply & fix in repairs chromium plated shower roses with swivel joints of 75mm size complete all as specified & directed.

S&F in repair chromium plated Jet spray with suitable flexible pipe to EWC for 15mm bore with fittings, complete all as specified and directed.

S&F in repair chromium plated hand shower with 1.00 mtr flexible pipe for 15mm bore with fittings, complete all as specified and directed.

Supply & fix in repairs PVC connections of 450mm long Make suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

Supply and fix in repairs PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed.

S&F in reipair CP towel rail brass 20mm dia 600mm long CP finish complete all as specified.

S&F in repairs for 20mm bore PTMT float valve with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 140gms), complete all as specified.

S&F in repairs for 25mm bore PTMT float valve with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 140gms), complete all as specified.

S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 15 mm dia complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 25 mm dia complete all as specified and directed.

Supply & fix in repairs steel C.P. grating 100/125 mm dia waste pipe hole fitted as required at site complete all as directed by Engineer-in-Charge.

S&F 15 mm bore concealed stop cock, chromium plated, cast copper alloy, screwed down with crutch or butterfly handle screwed both ends, as in repair including flench complete all as specified & directed.

Material and labour for rectifying the leakage of wall mixer/wash hand basin/sink mixer including replacement of brass spindle & PVC washers necessary fixtures etc complete all as specified and directed.

S&F in repair 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe fixed in repair complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

S&F in repair CP bibtap for sink, long shank, swan neck with swinging spout (Wall mounted model,) complete all as specified and directed.

S&F in repair brass spindlle of No 2/3/4 for CP bib taps/angle cock/pillar taps etc complete all as directed.

S&F in repair cast copper alloy spindle brass disc 3/4" for CP wall mixer, WHB mixer and sink mixer pillar tap / bib taps / angle cock, etc suitable for MAP Accn or other Accn complete all as specified and directed.

M & L for cutting of bushes small trees (Peepal small plants etc) trunks shrubs of any dia and girth from roof projection, chajjas , wall junction parapet etc at any height by necessary demoliton of brick work etc if requried and making good distrubed surfaces to match with existing finishes with and incl material and labour rendering in CM 1:4 mixed with and including water proofing compound @ 200 ml per 50 kg of cement consumed /PCC 1:3:6 type B0 ( using 12.50 mm graded stone aggregate) /Brickwork work in CM 1:4 as required at site and as directed by Engr-in-Charge

M&L for cleaning water tanks 500 ltrs and date of cleaning write down on the tank (in white paint) including the removing and refixing the tank and fitted with new union as required and repair work to stop leakage of water or damages occured during removing or refixing the tanks complete as directed by Engr-in-charge.

Supply and fix in repair PVC Pipes single socketed in any length with rubber ring joints, fixed to walls, laid under floors etc. 75mm bore as in waste and rain water pipes complete all as specified & directed.

Supply and fix in repair PVC Pipes single socketed in any length with rubber ring joints, fixed to walls, laid under floors etc. 110 mm bore as in waste and rain water pipes complete all as specified & directed.

Supply and fix PVC bends 110 mm bore, any radius complete all as specified & directed.

S&F PVC (SWR),110mm junction single, (Single T) equal or unequal complete all as specified and directed.

Supply and fix PVC bends 75 mm bore, any radius complete all as specified & directed.

S&F PVC (SWR),75mm junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repair for 75 mm bore PVC floor traps plain with grating including jointing with solvent cement complete all as specified & directed.

Please Enable Macros to View BoQ information