Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.5 LAccepted-AOC FLAT NO 402 4TH FLOOR BLDG NO 31 HANSGEET CO OP HSG SOCIETY PANT NAGAR GHATKOPAR E MUMBAI 400 075 | MUMBAI SUBURBAN | MAHARASHTRA | 400075 | ₹38.5 L Quoted ₹38.9 L | L1 | Accepted-AOC Found reasonable for acceptance |
| 2 | L2₹39.3 L+₹40,257 (1.04%)Rejected-Finance FLAT NO 04 3RD FLOOR HARI BHAVAN PLOT NO 44 MAHANT ROAD VILLES PARLE EAST MUMBAI 400057 | MUMBAI SUBURBAN | MAHARASHTRA | 400057 | ₹39.3 L+₹40,257 (1.04%) | L2 | Rejected-Finance L1 being accepted |
| Sl No | Description | Qty | Unit | Ramesh Enterprises L1 | Jay Jyotirling construction co. L2 |
|---|---|---|---|---|---|
| 1.00 | M & L for washing, rubbing down and stopping of any type of distempered wall surfaces, preparation of the surface, applying 1 mm thick wall care putty wherever required and applying two coats of oil bound distemper of any tint complete all as specified and directed. | 2,500 | Sqm | 55 ₹1,37,500 Lowest | 80 ₹2,00,000 |
| 2.00 | M & L for washing, rubbing down and stopping of distempered wall surfaces, preparation of the surface, making surface smooth by applying ready mix putty where ever required and applying one coat of oil bound distemper of any tint complete all as specified and directed. | 5,000 | Sqm | 50 ₹2,50,000 Lowest | 70 ₹3,50,000 |
| 3.00 | M & L for preperation of old painted ceiling surfaces, making surface smooth by applying ready mix putty where ever required and applying one coat of distemper oil emulsion complete all as specified and directed. | 1,500 | Sqm | 50 ₹75,000 Lowest | 70 ₹1,05,000 |
| 4.00 | M & L for preparation of old plastered wall surfaces and applying two coats of white wash complete all as specified and directed. | 400 | Sqm | 30 ₹12,000 | 12 ₹4,800 Lowest |
| 5.00 | M & L for preparation of old plastered ceiling surfaces and applying one coat of white wash complete all as specified and directed. | 500 | Sqm | 25 ₹12,500 | 11 ₹5,500 Lowest |
| 6.00 | M & L for preparation of old decorative wall surfaces, ceiling cornices etc by brooming, scrapping down dust particle, smoke soot, moulds, moss and efforescent salts etc, making surface smooth by applying ready mix putty where ever required and applying two coats of acrylic emulsion exterior paint including necessary scaffolding complete all as specified and directed. | 1,550 | Sqm | 70 ₹1,08,500 Lowest | 125 ₹1,93,750 |
| 7.00 | M & L for preparation of old decorative wall surfaces, ceiling cornices etc by brooming, scrapping down dust particle, smoke soot, moulds, moss and efforescent salts etc, making surface smooth by applying ready mix putty where ever required and applying one coat of acrylic emulsion exterior paint including necessary scaffolding complete all as specified and directed. | 15,500 | Sqm | 55 ₹8,52,500 | 50 ₹7,75,000 Lowest |
| 8.00 | M & L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. | 200 | Sqm | 100 ₹20,000 | 36 ₹7,200 Lowest |
| 9.00 | M & L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. | 2,000 | Sqm | 30 ₹60,000 Lowest | 36 ₹72,000 |
| 10.00 | Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. | 480 | Sqm | 30 ₹14,400 Lowest | 33 ₹15,840 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
15 Sept 2025, 6:00 pmClosed
GE (P) Navy Mandovi
GE (P) Navy Mandovi Military Engineer Services INS Mandovi
As per tender documents
2025_MES_725915_1
8640/E8 GE (P) NAVY MANDOVI
Open Tender
Construction Works
Item Rate
330 days
Mandovi
As per tender documents
8 documents required · 8 mandatory
₹500
GE (P) Navy Mandovi
₹80,000
Yes
16 Oct 2025
13 Aug 2025
17 Sept 2025
13 Aug 2025
15 Sept 2025
28 Aug 2025
13 Aug 2025 - 27 Aug 2025
Amount
M & L for washing, rubbing down and stopping of any type of distempered wall surfaces, preparation of the surface, applying 1 mm thick wall care putty wherever required and applying two coats of oil bound distemper of any tint complete all as specified and directed.
M & L for washing, rubbing down and stopping of distempered wall surfaces, preparation of the surface, making surface smooth by applying ready mix putty where ever required and applying one coat of oil bound distemper of any tint complete all as specified and directed.
M & L for preperation of old painted ceiling surfaces, making surface smooth by applying ready mix putty where ever required and applying one coat of distemper oil emulsion complete all as specified and directed.
M & L for preparation of old plastered wall surfaces and applying two coats of white wash complete all as specified and directed.
M & L for preparation of old plastered ceiling surfaces and applying one coat of white wash complete all as specified and directed.
M & L for preparation of old decorative wall surfaces, ceiling cornices etc by brooming, scrapping down dust particle, smoke soot, moulds, moss and efforescent salts etc, making surface smooth by applying ready mix putty where ever required and applying two coats of acrylic emulsion exterior paint including necessary scaffolding complete all as specified and directed.
M & L for preparation of old decorative wall surfaces, ceiling cornices etc by brooming, scrapping down dust particle, smoke soot, moulds, moss and efforescent salts etc, making surface smooth by applying ready mix putty where ever required and applying one coat of acrylic emulsion exterior paint including necessary scaffolding complete all as specified and directed.
M & L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M & L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
Demolition of reed, lathing, single or double, membrane any type including plaster or chicken wire lathing complete all as specified and directed.
M & L for rendering 15 mm (10+5) thick on fair faces of concrete rooftop surfaces in cement mortar 1:4 in two layers i.e first layer 10 mm thick and 5 mm thick outer layer mixed with WPC as per manufacturer's instruction and surfaces finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately under relevant item of this schedule.
Supply only integral waterproofing compound complete all as specified and directed.
M & L for priming surfaces and applying normal water proofing treatment (for moderate conditions) complete all as specified and directed.
M & L for providing APP based polymeric membrane, weighing minimum 3kg/sqm and minimum 4mm thick, reinforced with polyster non-woven fabric (wt. not less than 150 gms/sqm), laid on primed surface by forced application complete all as specified and directed.
M & L for applying one coat of aluminium paint over a coat of aluminium red oxide on surfaces of any description, over 10 cm in width or girth, not otherwise described complete all as specified and directed.
M & L for rendering 15 mm (10+5) thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 in two layers i.e first layer 10 mm thick and 5 mm thick outer layer mixed with WPC as per manufacturer's instruction and surfaces finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid under relevant item of this schedule.
M & L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces and surface finished even and smooth without using extra cement complete all as specified and directed.
M & L for rendering 5 mm thick in cement mortar 1:3 on fair faces of brick work or concrete ceiling surfaces and surface finished even and smooth without using extra cement complete all as specified and directed.
M & L for preparation of newly plastered wall surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.
M & L for preparation of newly plastered wall surfaces, applying chalk whiting preparatory to distempering and applying two coats of distemper oil emulsion complete all as specified and directed.
M & L for preparation of newly plastered ceiling surfaces, applying chalk whiting preparatory to distempering and applying two coats of distemper oil emulsion complete all as specified and directed.
Taking down steel tubing and connections of 15 mm dia bore complete all as specified and directed.
Taking down steel tubing and connections of 20 mm dia bore complete all as specified and directed.
Supplying and laying of CPVC pipes of 20 mm outer dia, SDR 11 & plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed.
Supplying and laying of CPVC pipes of 25 mm outer dia, SDR 11 & plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed.
S & F in repairs bib taps (long body), cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15mm dia bore complete all as specified and directed.
S & F in repairs stop valves, copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends, for iron pipes or for unions of 15 mm dia bore complete all as specified and directed.
S & F in repairs pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with fly nuts screwed for iron pipes of 15 mm dia bore complete all as specified and directed.
S & F in repairs bib tap, standard, of PTMT, any colour, high pressure, screwed for iron pipe of 15 mm dia bore complete all as specified and directed. (Note: Minimum weight 15mm - 90gms/ 20mm - 125gms)
S & F in repairs grating doom 100/ 150 mm dia of PTMT (Minimum weight 40 gms) including jointing with solvent cement complete all as specified and directed.
S & F in repairs health faucet (ABS Body), mild steel, chromium plated, suitable for 15 mm dia pipe, with 1.5 metre long flexible tube and ABS wall hook, including making connections and fixed in position complete all as specified and directed.
S & F in repairs vitreous China wash down water closet pan (pedestal pattern), white, including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
S & F in repair PVC valveless, syphonic action type, flushing cistern of 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern and connections to pipes and fixing of chain and pull, or lever, if any complete all as specified and directed.
S & F PVC connections of 15 mm size and 450 mm long with PTMT nuts complete all as specified and directed.
S & F PVC connections of 15 mm size and 600 mm long with PTMT nuts complete all as specified and directed.
S & F in repairs wash basins, Vitreous China, flat back or angle back type, 550mm x 400mm size, including brackets and cutting for and pinning in ends of brackets or erecting stand and fixing of polyethylene of low or high density or PVC 32 mm dia waste pipe complete all as specified and directed.
S & F in repiars sinks with drainage board made of stainless steel 1 mm thick, kitchen with plugs, washers and wastes; includding bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, of overall size 915mm x 460 mm and of bowl size 410mm x 330mm x160mm complete all as specified and directed.
S & F ball valves to CPVC pipe of 25 mm dia bore complete all as specified and directed.
S & F tank adaptor to CPVC pipe of 25 mm dia bore complete all as specified and directed.
S & F ball valves to CPVC pipe of 20 mm dia bore complete all as specified and directed.
S & F tank adaptor to CPVC pipe of 20 mm dia bore complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.
S & F 75 mm dia bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S & F 110 mm dia bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
M & L for PVC (SWR) floor trap of 75/110 mm dia outlet, plain with grating including jointing with solvent cement, fixed in repairs, complete all as specified and directed.
S & F 50 mm dia high density polyethylene (HDPE) pipes of pressure rating 6kgf/cm2 fixed complete to walls, ceilings or in floors including necessary fittings complete all as specified and directed.
S & F 160 mm dia bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, solvent cement jointed fixed to walls complete all as specified and directed.
S & F PVC (SWR) bends of 160 mm dia bore, any radius, with acess door complete all as specified and directed.
S & F PVC (SWR) bends of 110 mm dia bore, any radius, with acess door complete all as specified and directed.
S & F PVC (SWR) bends of 75 mm dia bore, any radius, with acess door complete all as specified and directed.
S & F PVC (SWR) junction single (single T/Y) of 110 mm dia bore, equal or unequal, with acess door complete all as specified and directed.
S & F PVC (SWR) junction single (single T/Y) of 75 mm dia bore, equal or unequal, with acess door complete all as specified and directed.
S & F PVC (SWR) vent cowl of 75mm dia bore complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M & L for 15mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and directed.
M & L for rendering 10 mm thick on fair faces of brick work or concrete vertical surfaces in cement mortar 1:4 complete all as specified and directed.
M & L for providing granite tile flooring using granite (of any type) tiles, 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed.
M & L for providing glazed ceramic coloured tiles in vertical surface, 350 x 250 x 7 mm/ 450 x 350 x 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M & L for providing non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M & L for providing non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
Demolition of precast concrete articles and precast concrete block walling built in cement mortar or cement lime mortar complete all as specified and directed.
M & L for providing precast cement concrete block masonry with solid blocks, exc 10 cm in width, of PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) and setting in CM 1:6 complete all as specified and directed.
M & L for rendering 15 mm thick in cement mortar 1:4 on brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
M & L for cleaning existing reinforcement with wire/ rotary wire brush, making the surfaces free of loose material, rust spalls, dirt etc, applying two coats of alkaline rust converting primer FEOVERT, confirming to ASTM-B-117, on rebars, with time interval of 6 hour between each coat) and applying protective coating of IPNET-RB complete all as specified and directed.
S & F wire netting of stainless steel wire 1.4 mm dia (size of mesh 25 mm) fixed with tinned tacks of stainless steel wire staples, including necessary frame of steel complete all as specified and directed.
M & L for providing TMT bars mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips for stiffner of chainlink fencing complete all as specified and directed.
Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
M & L for providing cement concrete 1:2:4 type B0, using 12.5mm graded crushed stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges on concrete surfaces over top of RCC chajjas using waterproofing compound as per manufacturer's instruction fcomplete all as specified and directed. Note: Quoted rate shall be deemed to be inclusive of cost of waterproofing compound.
Dismantling single layer Mangalore pattern or similar tiles in roofing complete all as specified and directed.
M & L for laying roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and directed.
M & L for ridge or hip tiles to suit Mangalore pattern of roofing Tiles, bedded and jointed in cement mortar 1:6 complete all as specified and directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
S & F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.
S & F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. Note: Width of ridge sheet shall be 60cm on both sides
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
S & F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc in Fe-290 Gde E-165 complete all as specified and directed.
M & L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Disconnecting existing tanks of capacity exc. 250 ltr and n.exc. 500 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required, reconnecting and re-fixing in position complete all as specified and directed.
Disconnecting existing tanks of capacity exc. 500 ltr and n.exc. 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required, reconnecting and re-fixing in position complete all as specified and directed.
M & L for preparation of old decorative surfaces of RCC water tanks, of 10 to 15 mtr height, by brooming, scrapping down dust particle, smoke soot, moulds, moss and efforescent salts etc, making surface smooth by applying ready mix putty where ever required and applying two coats of acrylic emulsion exterior paint including necessary scaffolding complete all as specified and directed.
Note: An amount of Rs 33775.00 on account of Credit Schedule for Schedule A Part II shall be deducted from the total amount of BOQ to arrive at Contract Sum.
Jay Jyotirling construction co. (BID ID -3426037)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .