NIT No GE/ND-85/2024-25

Amount

Taking down carefully old point wiring with aluminium/ copper conductor (Light / Fan/ Socket/ power Point ) complete including fittings such as ceiling rose, pendent holders, regulators and socket point etc and making good the disturbed surface & wall/ floor complete all as specified and directed.

M&L for point wiring with PVC insulated unsheathed multi stranded FRLS type copper conductor cable of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded FRLS type copper conductor cable of size 1.5 sqmm as earth continuity conductor connected to common earth dolly in and including PVC concealed conduit 20 mm dia medium grade ISI marked and its accessories including provn of new factory made pressed steel modular switch/terminal box of suitable size and new modular front & back plates of approved colour/model of suitable size for housing the modular switches, sockets, fan regulators for one light/ fan/ exhaust fan point controlled by one no, one way 5 Amp switch complete all as specified and directed. Note: (i) Cutting chases for concealed conduit and making good in cement mortar is deemed included in unit rate. (ii) No cutting shall be done in the roof for laying PVC conduit for ceiling point wiring. In this specified portion wire shall run through the existing conduit or surface new conduit shall be provided as required. (iii) In case the wiring is encountered with any beam/column, then the wiring will run on surface to avoid any damage to the RCC portion.

All as per item No 2.00 above but One three pin socket outlet 5 amps point controlled by one no, one way switch on independent board complete all as specified and directed.

All as per item No 2.00 above but One three pin 5 Amp socket outlet point controlled by one no, one way switch on same board complete all as specified and directed.

All as per item No 2.00 above but with 2.5 sqmm (for phase, neutral) and 2.5 sqmm (for continuous earth wire) cable for one 15/16 amp socket out let point on independent board complete all as specified and directed.

S&F in replacement of modular Switch 6 amps,one module, 230 vots, single pole, one way (ISI marked) complete all as specified and directed.

S&F in replacement 16 Amp rating modular switch one way one module complete all as specified and directed.

S&F in replacement of modular socket out let 230 volts, 6 Amp - 2/3 pin combined 2 module complete all as specified and directed.

S&F in replacement of modular socket out let 230 volts, 16 Amp - 2/3 pin combined 2 module complete all as specified and directed.

S&F in replacement LED light fitting basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver 2 feet, 10 watt 220 V AC including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in replacement warm/cool white rope light 140 led per meter with 5 nos adapter to connect as pe design as specified by engr in charge complete all as specified and directed.

S&F in replacement Chandeller circular / square shaped of size 2-3 ft in length and 2-3 ft wide consist warm led buld and plated glass crystal suitable to fix into false ceiling with golden / warm white finish complete all as specified and directed. Make : Philips Cat Part No 581964 or equivalent of make as specified in PS.

S&F in replacement Chandeller circualr/square shaped of size 1-2 ft in length and 1-2 ft wide consist warm led buld and plated glass crystal suitable to fix into false ceiling with golden / warm white finish complete all as specified and directed. Make : Philips Cat Part No 581864 or equivalent of make as specified in PS.

S&F in replacement mirror light 22 wat LED type WW /NW/CDL made of copper plated metalic body and suitable to mount on wall complete all as specified and directed. Make: Philips Cat Part No 581999 or equivalent of make as specified in PS.

S&F in replacement COB led light of 12 watt WW /NW/CDL made of aluminium body and interior plated with copper metal , suitable to fir into false ceiling complete all as specified and directed. Make : Philips Cat Part No Flexbeam COB or equivalent of make as specified in PS.

S&F in replacement COB led light of 7 watt WW /NW/CDL made of aluminium body and interior plated with copper metal , suitable to fir into false ceiling complete all as specified and directed. Make : Philips Cat Part No Flexbeam COB or equivalent of make as specified in PS.

S&F in replacement strip LED light 140 led per meter suitabe to fix into false ceiling, including its encloser made of aluminium and uper covering of white flashing fiber to transmit light smoothly and two adopter complete all as specified and directed.

S&F in replacement LED downlighter 15 watt WW /NW/CDL recess mounted aluminium body and size as per sample complete all as specified and directed. Make : philips Cat Part No Dura Slim 15 W or equivalent of make as specified in PS.

S&F in replacement LED downlighter 12 watt WW /NW/CDL recess mounted aluminium body and size as per sample complete all as specified and directed. Make : Philips Cat Part No Dura slim 12W or equivalent of make as specified in PS.

S&F in replacement LED downlighter 7 watt WW /NW/CDL recess mounted aluminium body and size as per sample complete all as specified and directed. Make : Philips Cat Part No Dura slim 7 W or equivalent of make as specified in PS.

S&F in replacement LED light for fountain 6-10 watt with driver completet set consisit of water proof body complete all as specified and directed.

S&F in replacement picture light 10 watt adjustable type , Direct the light at any angle with 230 degree tilt and 360 degree rotation ,color warm/white complete all as specified and directed. Make : Philips Cat Part No Flexspot COB 10W or equivalent of make as specified in PS.

S&F in replacemnt picture light 3 watt made of pvc body adjustable type Direct the light at any angle with 230 degree tilt and 360 degree rotation ,color warm /white complete all as specified and directed. Make : Philips Cat Part No Flexspot COB 3W or equivalent of make as specified in PS.

S&F of LED projector light fixture 24W, LED, RGBW (DMX512 Compatible), IP 66. The housing should be made of high strength pressure die cast aluminium with 3-4mm thick safety glass and coated by static powder making it weather resistant. Protection screen with tempered glass with high impact resistance IK07. Voltage input 24V DC. The luminaire should have options for various beam angle: 10°/25°/40°/60°. Light fixture should be standard DMX512 protocol compatible, the DMX decoder function should be inbuilt the light fixture. Estimated LED Lifetime is L70-100,000 hours minimum@ 25degree Ambient Temperature and LEDs of CREE / OSRAM / NICHIA to be used. Minimum Light fixture Lumen output atleast 960 Lumens @ full power. Operating Temperature : - 20°C to +50°C. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements complete all as specified and directed. Make: Orient/ Philips/ Havells

S&F of LED projector light fixture 20W, LED, RGBW (DMX512 Compatible), IP 66. The housing should be made of high strength pressure die cast aluminium with 3-4mm thick safety glass and coated by static powder making it weather resistant. Protection screen with tempered glass with high impact resistance IK07. Voltage input 24V DC. The luminaire should have options for various beam angle: 10°/25°/40°/60°. Light fixture should be standard DMX512 protocol compatible, the DMX decoder function should be inbuilt the light fixture. Estimated LED Lifetime is L70-100,000 hours minimum@ 25degree Ambient Temperature and LEDs of CREE / OSRAM / NICHIA to be used. Minimum Light fixture Lumen output atleast 800 Lumens @ full power. Operating Temperature : - 20°C to +50°C. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements complete all as specified and directed. Make: Orient/ Philips/ Havells

S&F of RGBW linear wallwasher made of aluminium extrusion, LED Make : CREE / LUMINOUS / OSRAM / SEOUL / SAMSUNG, exterior-rated linear luminaire (1000mm), Input Power 18W, DMX512 with inbuilt decoder PCB for individual addressing for programming, Rated input supply of Input Voltage 24V DC, Luminaire luminous flux Minimum range 720Lm. IP protection rating : IP66. The luminaire should have multiple beam angle: 10°, 20, 40, 60°, 10X20° ( as per site requirement) complete all as specified and directed. Make: Orient/ Philips/ Havells

Supply and fixing of IP67 power supply 24V output Power consumption- 200W complete all as specified and directed.

Supply and fixing of Signal Booster/Splitter with 4-Way output for spreading and amplyfing the DMX Data signals in multiple directions, Input-220-240V AC complete all as specified and directed.

Supply and installation of 2X512 DMX 512 Controller Input Power 5-5.5V DC 0.6A, Output Protocol DMX512, Programmability Windows, Mac OS, iOS, Android, Connections Type C USB, XLR3, Ethernet, HE20, battery Memory microSD SD & SDHC, Environment IP20. 0°C - 50°C, Buttons 10 buttons for direct access, 2 buttons to change scene, + 1 button to change zone Dimensions 160x90x45mm 268g, OS Requirements Mac OS X 10.8-10.15, Windows 7/8/10 64bit Standards EC, EMC, ROHS complete all as specified and directed. Make: Nicolaudie, Pharos, Madrix, Color Kinetics.

Supply and installation of enclosure for Splitter, DMX Controller : Size 450 x 300 x 250 mm, plain sides, grey cover, Degree of protection: IP 66/ IP 67, Impact strenght: IK 08, Material, base: Fiberglass reinforced polycarbonate, Material, cover: Polycarbonate, Material, cover screws: Polyamide, Material, gasket: Polyurethane, Colour: RAL 7035 complete all as specified and directed.

Supply and installation of DMX Special cable (single pair) having one 22AWG pair stranded (7x30) tinned copper conductors, Datalene (FHDPE) insulation, twisted pairs, overall Beldfoil shield (100% coverage) plus tinned copper braid, PVC jacket Cable complete all as specified and directed.

Programming, Testing, Troubleshooting and synchronization of DMX control system. The addressing of fixtures with the multiple scenes (atleast 20Themes) as per instruction of engineer in charge complete all as specified and directed. Note: Installation of facade lighting in connection with all themes and control system shall be included in the quoted rate.

Supply and Fixing of Electrical items like cables, Junction boxes, Panels, MCB's etc for comlete facade lighting at entrance gate complete all as specified and directed. Note: (a) All the cables and minor thimbles, soldering, brazing with the control system shall be included in the quoted rates for item No 24.00 to 32.00 (b) Testing of all the Items shall be done (24.00 to 32.00) on site in the presence of user, Engg-in-charge and GE. (c) Any minor changes suggested by User and Engg-in-charge after testing must be considered and implemented thereafter before completion and utter satisfaction of user and Engg-in-charge

RUCHIKA ENGG.WORKS (BID ID -3167508)

NEERU ELECTRICALS (BID ID -3166728)