Renovation of Water Supply and Sanitation Department Rest House Amritsar

Amount

SANITARY INSTALLATION

Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge ) complete in all respect.

A) C.P. Brass fittings: ii) C.P. brass Bib cock with wall flange

iii) C.P.brass 15mm Angular stop cock with Wall flange

iv) C.P.brass 15mm Concealed stop cock with adjustable wall flange with seal.(Outer + inner Body)

v) C.P. brass 3- hole basin mixer without popup system .

x) C.P. brass overhead shower Ø180mm round shape single flow with shower arm with 20mm i/d Inlet and 300mm long round shape with 900 bend with flange.

B) C.P. Brass Accessories:

i) C.P. brass towel rail 600mm long

ii) C.P brass towel ring square

iii) C.P. brass soap dish holder with glass dish

iv) C.P. brass toilet roll holder with flap

v) CP Glassc Shelf 600mm

Providing & Fixing of Wash hand Basin cabinet Type

Providing and fixing in postion storage type automatic electric water heater pressure / non pressure type thermostatically controlled, single phase, vertical wall mounted of approved make (to the approval of Engineer-in-charge) with thermostats, inner container of stainless steel complete with 1 Mtr. three core flexible cord with plug, non return valve and pressure release valve complete including fixing and testing complete in all respect.

a) 25 litre capacity water heater

Less credit (-)

Providing & installing of instant Gyser of 3 Litre Capacity for kitchen

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect.

ii) Size 550 mm x 400 mm x 815 mm

Providing and fixing vitreous chinaware standard pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect.

i) Vitreous chinaware standard white pedestal for wash hand basin

CONCEALED IN WALL : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in-Charge), having thermal stability for hot & cold water supply, including all CPVC plain & beass threaded dittings i/c fixing the pipe with clamps at 1.00m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge.

b) CPVC SDR 11 Pipe & fitting 20mm o/d

c) CPVC SDR 11 Pipe & fitting 25mm o/d

Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers complete in all respect (as required by the Engineer-in- Charge)

b) Size 550mmx400mm

Providing and fixing in position S.S. Grating with frame of approved make (to the approval of Engineer-in-charge) complete in all respect

Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect.

PVC tube connection of size 15mm x 450 mm with C.P. Brass nut

Providing & fixing in position C.P. copper tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect.

a) C.P. copper tube connection of size 15 mm x 300 mm with C.P. Brass nut

Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304 (18/8) with waste coupling complete in all respect.

a) Rectangular Sink with Deluxe Border Single Bowl Overall Size 700 mm x 555 mm x 230 mm

Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect.

Providing & Fixing in postion liquid soap container of approved make (to the approval of Engineer-in-charge ) complete in all respect.

a) C.P. brass liquid soap container

Providing and fixing in position automatic brass Ball Cock in tanks.

B) Brass Ball Cock with rod and Plastic Ball ii) 20mm i/d

Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank.

ii) Double Layer Tanks (500 Ltr x 4) = 2000 Ltr

Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect.

b) G.I. tank nipple 20mm i/d

Providing and fixing Stainless steel health faucet complete in all respect.

Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge.

a) Eurpoean/Indian/Orissa W.C.,

b) PVC / China Ware Cistern

c) Wash Hand Basin / Urinal Pot

d) Stainless Steel Sink /Mosaic Sink

Providing and fixing in position Chinaware extended wall mounted E. W.C. type suite (size 66 x 46 x 77.5 cm ) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) with or without 10 ltr. chinaware matching flushing cistern and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.

Chinaware extended wall mounted E W.C. with matching chinaware cistern and seat cover complete in all respect.

Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-in-charge )with various fixtures complete in all respect.

i) C.P. Brass extension piece, 25mm long to 50mm long

Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect.

Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect.

Providing, fixing and jointing ISI Marked Gun-Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete

c) 25mm i/d Gun Metal peet valve heavy pattern.

Providing, fixing and jointing G.I Union Couplings(of approved make with the approval of EIC) as per IS 1879 in G.I. Pipe lines complete in all respect.

25mm i/d G.I. Union

Less Credit for old C.I special and C.P Brass Fitting items (-)

FLOORING

Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. a) Size 600x600 mm

Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect.

Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect.

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm, 100x200mm, 200x200mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading.

40mm thick grey terrazo topping rubbed and polished to a granolithic fincish under layer 34mm thick cement concret 1:2:4 and top layer 6mm thick with 3mm gauge white marble makrana chipping from indigenous marble laid in 1:1½ (50 Kg of ordinary grey cemetn and 0.05 cum of white marble chippings)

DISTEMPERING, SNOWSEM, PAINTING

Scraping White wash and colour wash

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats on old distempered work when shade is changed

Finishing walls with cement based water soluble exterior paint such as snowecem, robbiacem etc. on old work one coat to give an even shade 1 X 334 = 334

Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint.

ELECTRICAL Work & Curtains

REPLACEMENT OF WIRES, COVER FRAMES, MODULAR SWITCHES, CONCEALED METAL BOX AND OTHER ACCESSORIES IN THE EXISTING RECESSED CONDUIT PIPE WIRING SYSTEM (WITH MODULAR TYPE ACCESSORIES):

Replacement of PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in existing heavy gauge welded conduit pipe 20 mm/25 mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):-

Wiring fan point (without fan box )

Wiring fan point (with fan box)

Wiring light point

Wiring call-bell point

Wiring 6 Amp. wall socket point .

Wiring 6 Amp. Plug control comprising wall socket point.

Wiring 16/20 amp. power plug control point.

Wiring light point with double control switches.

RECESSED TV, TELEPHONE & NETWORKING SOCKETS OUTLET POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):

Supply and erection of TV socket, Telephone socket and Networking socket points in powder oated/anodized concealed metal boxes recessed in wall required for suitable number of modules (Modular accessories) for having TV sockets, Telephone sockets RJ11 & Networking socket RJ45 (one module), covered with Frame Plate and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-

Wiring TV socket point (one module)

Split type AC Mitsubishi 1.5 Ton 3 Star Non Inverter Split AC (Ms-GK18Va) including 4 KVA Stabilizer

Copper Refrigrent piping

Electircal Wiring

Outdoor unit M.S. Stand

Drain Piping

Heater Blowers for each Room

L E D (Make - Sony Bravia Smart TV)

1. Drawing Room 42" (R352F/R302F Series)

Exhaust fan 12"

Ceiling Fan 48" Orient/Bajaj./Usha/Havells

Providing & fixing of Zebra Blinds for drawng room & Conference Room

Providing curtains Cloth Superior Quality for Curtains

Tailoring of curtains.

Providing and fixing railing for curtains.

C' type

Providing and fixing steel rings chrome-plated 3.80 cm. dia. for curtains.

Less Credit for old scraped all items (-)

KITCHEN EQUIPMENTS

Gas Stove 4 Burner

RO Commerical

Electric Heater

Utensils

pressure cooker

Tea Set

One LG Micro oven model no. MC 2846BG convection & Grill including cock ware kit.

Less Credit for old scraped all items (-)

FURNITURE

Godrej Slide and store pro plus with mirror (VIP Room)

Double Bed (Godrej Maze King Bed)

Godrej Matress accupatic 6" Thickness

Godrej Maze Bed Side Table

Fancy Chair (Godrej Dining Chairs TIA)

Fancy wooden Table (Godrej Splenda Corner Table)

Godrej Matress accupatic 5" Thickness (75x 36)

Dinning Table (Godraj Dining Table 8 Seater Lagency)

Godrej Dining Echo Dining Chair (Ground Floor Dining Room)

Upholstering

Repair of Sofa set including Material cost complete

Repair, Recovering and restuffing easy chairs including Material cost complete

Repair, Recovering and restuffing Dinning chairs including Material cost complete

Shower Curtain size (137.16cm x 213.36cm(7'))

Bed sheet size ( 254cm x 224 cm) with 2 pillow cover

Sleeping Pillow pack of 2

Plastic bucket (20 L) with Mug

Door mat (medium size)

Hair & Cair Hair oil (300ml)

Odonil Lavender Mist Spray (Room Freshner)

Head & Shoulders shampoo (1Litre)

Savlon Moisturizing Glycerin Soap (5 x 125g)

Cotton 550 GSM Bath Towel

Less Credit for old scraped all items (-)

Wood Work

Chowkats of Red meranti Normal (15 to 16 kg per cft. Approx.) confirming to ISI specification no 1003 m kiln seasoned of doors and windows including iron hold fasts, corner straps cleats, stops bolts for hold fasts etc, complete fixed in position A) Double rebate (60x150mm)

Wire gauze door shutter with Kail wood without springs housed in chowkats (Single Leaf) a) 35mm thick

Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt)For shutter area above 0.50 sqm

Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete

I.S.I Designation No. II (size of door 701mm to 850mm)

Renewing glass panes with wooden fillets wherever necessary Glass panes weighing 10.75 Kg/sqm

Providing and fixing 65mm wide and 2 to 3mm thick PVC cover on stair case ralling in any shape and size fixed with adhesive compound in all respect as per drawings.

Providing & fixing 6" stainless steel handles ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge.

Providing & fixing 6" stainless steel tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge.

Providing and applying Anti Termite Treatment using post constructional chemical treatment measures as per IS - 6313 - 2001 ( Part 3 ) & using Chemical containg chloropyrifos systemic insecticide diluted to manufacturer's specifications by drilling holes in the floor slab & along skirting 300 mm apart & 12 mm dia, drilling holes along all possible entry points such as junctions of floor and walls, door frames, sewage lines, entry points , etc. & injecting them with the chemical solution.

Hollock wood cup board shutter with plywood panels or faced on both side fixed in position (excluding the cost of handles, bolts hasp with staple but including the labour for fixing them)

30 mm thick

Spirit or Wax polishing

Dinning Tables with Chair (Up to 8 Nos)

Tables (area 0.5 to 1 Sqm)

Sofa chair with wooden Arms

Less Credit for old scraped all items (-)

THE SUN STAR COOP L/C SOCIETY