WBPWD/SEWEC /BED /NIQ-73 /2024-25

Amount

Pole & Fittings

Supply and delivery of LED Street Light lens type, 240V, 120 Watt, 5700K, Luminous efficacy ≥120 Lm/Wt made up of pressure die cast Aluminium Housing with toughened glass and high power LEDs and Secondary lenses with all accessories and equipped with IP66 Protection with 10 kV SPD included . (Make- Surya -Pollux SLEUL120WIP66PLX/Jaguar-Roadways Light OSLGRYLSRT015120XC/Benlo-Ultima BL18SL120WULT) as per direction of E.I.C. (with 5 years warranty and manufacturer warranty certificate is to be provided)

Supply and Delivery of 1.5 sqmm stranded copper wire. Make:- Polycab/KEI/Mescab

Supply of 240 V timer DB with suitable size sheet steel enclose double door, phosphatised powder coated, neutral bar , din rail with IP-43 protection comprised with 1 no. 32A DP MCB (‘C’ Curve, 10KA), 1 no. 24 hours programmable analog timer switch (min 15 min interval setting) and 1 no. 32A contactor, 1 no. 32A timer bypass switch, 1nos out going stud/ bar complete with internal wiring by 1.1kV grade 4 sq mm. FR PVC insulated copper wire incl. 1 no. auto manual by pass troggle switch and provision for earthing attachment incl. LED indicating light for running condition with locking arrangement. [Make:- L&T /Cabtree/Siemens]

Supply & Delivery of 9 Mtr Steel Tubular Pole (Calcutta poles/Subham/ Bajaj/ Transrail) as per specification Type 410 SP -28 as overall having diamention are i) Length:- 9 mtr ii)Weight 113kg. : iii) Length of bottom section: 5 Mt., iv)Middle section : 2 Mt. and v)Top section are : 2 Mt. Out side dia & thickness of the sections vi) Bottom Section:- ( 139.7 x 4.50) mm; vii) Middle Sections:-(114.3 x 3.65) mm , viii)Top Section:- (88.9 x 3.25 ) mm with fixing the base plate and GI earth bolt after making drilled holes etc. on pole as per direction of EIC Make:- (Calcutta poles/Subham/ JK/ Transrail)

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly

a) Upto 9.0 mtr. Size 0.6x0.6x1.70 mts

Extra for providing CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.76 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) incl. drilled hole in pole suitable for alkathene/polythene pipe entry, for street light wiring, without Loop Box

S&F 50 mm. dia 1.5 mtr. long detachable type G.I. Single arm bracket, suitable for pole head. The arm bracket shall be properly welded with 15 mm. thick stifner plate of pole sleeve for strengthening incl. properly fixing arrangement with the pole by bolts, nuts and washer as per direction of EIC.(Attach Anexture)

S&F 50 mm. dia 1.5 mtr. long detachable type G.I. Twin arm bracket, suitable for pole head. The arm bracket shall be properly welded with 15 mm. thick stifner plate of pole sleeve for strengthening incl. properly fixing arrangement with the pole by bolts, nuts and washer as per direction of EIC. (Attach Anexture)

S&F 50 mm. dia 1.5 mtr. long detachable type G.I. Triple arm bracket, suitable for pole head. The arm bracket shall be properly welded with 15 mm. thick stifner plate of pole sleeve for strengthening incl. properly fixing arrangement with the pole by bolts, nuts and washer as per direction of EIC.(Attach Anexture)

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint

Upto 9.0 mtr. long pole

(i) 1st coat of aluminium paint over 1 coat of RO priming

(ii)2nd coat of aluminium paint over 1st coat

Painting Block Letters or Digits within a circle/square as required, with ”Black Japan” paint of approved make & brand, the size of letters and digits as given below

Size 50 mm and upto 75 mm

Supply of 12 M GI high mast shaft in two sections suitable for wind speed 50 M/sec made up from HTS conforming to BSEN10025, S355Jo. with head frame, luminaries carriage suitable to install 6 nos. luminaries in symmetrical/asymmetrical arrangement, lightening final along with Accessories required such as winch, 6 mm diameter SS wire rope (AISI316), two continious rope with out any intermediate joint, 5core 4sq.mm Copper ERP insulated PCP sheathed trailing cable, connector, integral power tool motor, manual handle, junction box foundation bolt etc.as required. (Make: TRANSRAIL/BPP/Utkarsh) T0P DIA -150 mm, BOTTOM DIA -310 mm, SECTION - 2 THICKNESS - 3.3 mm. BASE PLATE - 540 mm x 540 mm x 25 mm, PCD - 460 mm. FOUNDATION BOLT - M30 x 850 (6 Nos.) WITH TEMPLATE AND ANCHOR PLATE Double Drum Winch(Gear Ratio - 53:1) 750 KG, FLP Motor 1.5 HP, 6 mm SS wire rope (Grade-AISI 316), Compensating Disc, L-Stopper (3 Nos.), Manual operating handle, Mounting plates, Lightening Arrestor and earthling spikes (MS GI). Trailing cable(1 sets 5 core x 4 sq.mm EPR PCP Round Copper), GI Junction box of detachable type.

Erection, testing & commissioning of 12M length high mast with Co's own tools, tackles, crane including labour charge & carrying as per direction of EIC.

Supply and installation of outdoor stand mounted feeder pillar with 32A TPN MCB incomer, single dial timer, 25A TP contactor for the automatic switching of luminaries, power tool control with 2 no 9A contactors and raise lower push button, Incoming 16 sq. mm and out going 10 & 2.5 sq. mm terminals.

Supply and Delivery of 240V, 200 W LED, lens type atleast 5400 K Colour Temperature, luminous efficacy >120 LPW, Flood light luminarie made with pressure dicast aluminium housing with toughened glass complete with all accessories and equipped with IP66 Protection with 10 kV SPD included (Make- Surya-LIVIA SLEFC200WIP66/Jaguar-LEDSTAR OFLGRYLFLDLS200XC/Benlo ultima- BL17FL200WULT) as per direction of E.I.C. (with 5 years warranty and manufacturer warranty certificate is to be provided)

Fixing only Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure.

Supply & Fixing of (TRANSRAIL APUS3.0 / BAJAJ/Equivalent make) single dome LED aviation obstruction light.

Construction of suitable shallow foundation with 1:2:4 concrete for the highmast considering the safe soil bearing capacity at site as 10 T/sqmtr at 2 metre depth with all materials and labour.

Excavation of soil for RCC Base Foundation of Poles and filling & ramming as to GS. (For soft soil.)

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. Pakur variety

Single brick flat soiling of picked jhama bricks including ramming and dressing bed to proper level and joints with local sand.

Labour for laying single brick flat soling including ramming and dressing bed to proper level and filling joints with powdered earth.

Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand.

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns,lintels curved or straight including fitting, fixing and striking out after work (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.For works in foundation, basement and upto roof of ground floor/upto 4 m Tor steel/Mild Steel SAIL/ TATA/RINL : In ground floor

Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20 mm size) including shuttering and reinforcement, if any, in ground floor as per relevant IS codes ( Pakur variety )

Supply and Delivery of 240V, 150 W LED, lens type, 5700 K Colour Temperature, luminous efficacy >120 LPW, Flood light luminarie made with pressure dicast aluminium housing with toughened glass complete with all accessories and equipped with IP66 Protection with 10 kV SPD included (Make- Surya-LIVIA SLEFL150WIP66/Jaguar-LEDSTAR OFLGRYLFLDSLS150XC/Benlo ultima-BL17FLI150WULT)as per direction of E.I.C. (with 5 years warranty and manufacturer warranty certificate is to be provided)

Fixing only Floodlight fittings on top of masonary structure by 3 Nos. 10 mm dia x 87 mm long rag bolts, nuts & double washers complete either 37 mm x 10 mm MS flat support/or by other means as required

Supply and Delivery of 240V, 70 W LED, lens type, 5700 K Colour Temperature, luminous efficacy >120 LPW, outdoor street light luminarie made with pressure dicast aluminium housing with toughened glass complete with all accessories and equipped with IP66 Protection with 10 kV SPD included (Make- Surya-LEXON SLEUL72IP66 /Jaguar- OSLGRYLSRT015070XC/Benlo ultima-BL18SL70WULT)s per direction of E.I.C. (with 5 years warranty and warranty certificate is to be provided)

Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.

Cable Works

Supply and delivery of 1.1 KV grade,XLPE Insulated & Sheathed Armoured Aluminium Conductor cables. [Make: /POLYCAB/RR KABLE /KEI]

2 Core 10 sqmm

4 Core 6 sqmm

Supply and delivery of 650/1100 Volts Control Cables with Stranded Copper Conductor, PVC/ XLPE Insulated, Cores Laid Up, Extruded PVC (Upto 4 core) / Thermoplastic Tape Inner Sheathed, Unamoured and Extruded PVC Type ST2 Outer Sheathed As Per IS-7098 (Part 1) [Make: POLYCAB/RR KABLE /KEI]

3 core 1.5 sqmm

Laying of copper cable inside existing poles and necessary connections with pole fittings and loop box including necessary garbages/ weeds cleaning, ladder arrangments etc. as per requirements

3 core 1.5 sqmm

Laying of cable on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

2 Core 10 sqmm

4 core 6 sqmm

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

2 Core 10 sqmm

4 Core 6 sqmm

S & F compression type brass cable gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entryof XLPE/PVC armoured cableas & Finishing the end of the following XLPE/PVC armoured cableas by crimping method incl. S&F solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials:

2 Core 10 sqmm

4 Core 6 sqmm

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

i. Charges for cutting floor of RCC incl. mending the damage as per GS (Civil Work)

ii. Charges for Pitch road cutting incl. mending the damage as per GS ( Civil Work)

iii. Charges for Concreate mixture 1:1.5:3 ( Cement: Sand: Stone chips ) as per GS ( Civil Work)

iv. Charges for cutting morrum soil/ soft soil/ concrete incl. mending the damage as per GS ( Civil Work)

Earthing & GI pipe

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as by ISI-Medium GI pipe

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages No. 4 SWG

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required with necessary socketing/welding.

40 mm dia

50 mm dia

SREE GURU ENGINEERING (BID ID -5605801)

D.D ELECTRICALS (BID ID -5602859)