Improvements to the room adjacent to dispensary for provision of studio based video conference room in the Utility block at Integrated Court complex Puducherry

Amount

Supplying chemical emulsion in sealed containers including delivery as specified - Chlorpyriphos / lindane emulsifiable concentrate of 20%

Diluting and injecting chemical emulsion for POST - CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) -along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. -with chlorpyriphos lindane E.C.20% with 1% concentration.

Diluting and injecting chemical emulsion for POST - CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) treatment of soil under existing flooors using chemical emulsion @ one litre per hole, 300mm apart including drilling 12mm diametre holes and plugging with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor - with Chlorpyriphos / lindane E.C. 20% with 1% concentration.

Providing and fixing plywood 4mm thick , one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with - Decorative veneer facings of approved manufacture.

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc complete - 250 x 10 mm

Providing and fixing bright finished brass handles with screws etc complete - 125 mm

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc complete

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI , IS :3564 , embossed on the body , door weight upto 35 kg and door width upto 700mm ), with necessary accessories and screws etc complete

Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc.complete - 125 X 75 X 4mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS :1868), transparent or dyed to required colour or shade , with necessary screws etc. complete - 300 x10 mm.

Providing and fixing bright finished brass 100 mm mortice latch and lock , ISI marked , with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) aluminium lever handles of approved quality with necessary screws etc complete

Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc with iron screws , plugs and priming coat on unexposed surface etc. complete Burma teak wood - 50 x 50 mm (base and height)

Providing and fixing plain lining with necessary screws / nuts & bolts / nails , including a coat of approved primer on one face , and fixed on wooden / steel frame work , complete (Frame work shall be paid for separately) - 12 mm thick commercial ply conforming to IS :1328 BWR type

Providing and fixing in wall lining medium density fibre board IS : 14587 : 1998 marked , Pre -laminated one side decorative lamination and other side balancing lamination , with necessary fixing arrangement and screws etc. complete - 12 mm thick

Provding and fixing 1/2"tk Daikin mineral false ceiling tiles prima fine fissued regular edge or equivalent having fire propogation test of 'class O' as per B.S.476 part 6, with a flame spread of class A of US federal spec. SS/S/118B . Thermal conductivity at 0.045K cal/mhc of JIS A 1412. Noice reduction co-efficient (NRC)of 0.55-0.6of ASTMC 423,light reflectance of LR 1(>75% os ASTM C523 ) CAC at 36 of ASTM E 413 and asbestos free and humidity resistance of RH 99% of size 600 x 600 mm with interlocking metal grid of hot dipped galvanised steel sections (galvanized at 170gm / sqm) with pre-finished in baked polyster paint , consisting of main runners of size 24x33 mm T-sections made of 0.27mm thick (minimum) sheet spaced at 1200 mm centre to centre and secondary T hot dipped galvanized steel section of size 28x24 mm made of 0.27 mm tk (minimum ) sheet with pre finished in baked polyster paint to be interlocked in between main runner at 600 mm centre to centre to form overall grid of 600x600 mm laying 15 mm thick mineral fibre false ceiling tiles in the grid suspended by hanger rods 60 cm long with bolts @ 1.2 m c/c including cutting /making openings of services like fittings , diffusers, grills, smoke detectors, etc including providing necessary wall angle of size 19 x 19 x 0.45 mm on all four sides including scaffolding etc., complete- ceiling upto 6.5 m height

French spirit polishing - Two or more coats on new works including a coat of wood filler

Finishing walls with premium acrylic smooth exterior paint with silicon additives of required shade - old work (one or more coats applied @0.83 ltr /10 sqm)

Melamine polishing on wood work (one or more coat)

Dismantling wooden boardings in lining of walls and partitions , excluding supporting members but including stacking within 50 metres lead - thickness above 25mm upto 40mm

Providing and fixing PVC false roofing with the existing PVC cabin using sintex PVC section of size 6mm x 250 mm , having interlocking facilities supported in the PVC extruted multi chamber frame section of 40 x 48 mm , with necessary MS / Stainless screws. The rate includes the cost of sintex PVC section , labour charges for fixing and transport etc.complete

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions , i.e at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling , C.P.brass /stainless steel screws , all complete as per architectural drawings (Glazing, paneling and dash fasteners to be paid for separately) - for fixed portion - anodised aluminium (anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of grade AC 15)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions , i.e at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling , C.P.brass /stainless steel screws , all complete as per architectural drawings (Glazing, paneling and dash fasteners to be paid for separately) - for shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (fittings shall be paid for separately) - Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 grade I type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings- Pre -laminated particle board with decorative lamination on both sides

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings ( cost of aluminium snap beading shall be paid in basic item) - with float glass panes of 4.0 mm thickness

Providing and fixing 100 mm brass locks (best make of approved quality ) for aluminium doors including necessary cutting and making good etc. complete

Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc.complete - Anodized (AC 15) aluminium

S VENGATESAN

SEETHARAMAN