8270 RENOVATION OF KITCHEN AND BATHROOM OF TYPE-II QUARTERS IN BLDG No. 6 (16 QTRS), BLDG No. 7 (08 QTRS) AND BLDG No. 9 (08 QTRS) OF DAD RESIDENTIAL COMPLEX, WING A AT WANOWARIE RANGE UNDER GE SOUTH PUNE

Amount

Demolition of cement concrete of any description in any position in sunken floor and roof slab padding & like etc including removal of debris outside MD land and dumping ground will be sorted out by contractor at their own arrangement complete all as specified and as directed.

M & L for 40mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) over cement slurry @ 0.488 kg/Sqm with WPC laid in slope towards external walls complete all as specified and as directed. (Note : WPC shall be measured and paid separately)

Cutting holes in brick walls built in cement mortar for bolts, joist, pipes, air flues, ventilators and cast iron boxes superficial area not exc. 150 Sqcm and making good in CM (1:3) or PCC (1:2:4) type B-1 as required complete all as specified and as directed.

Rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surface with water proofing compound and apply cement slurry @ 0.242Kg/Sqm and this layer will be allowed to air cure for 4 hours complete all as specified and as directed. (Note : WPC shall be measured and paid separately)

S & F GI tube 50mm bore medium grade complete all as specified and as directed.

Preparing plastered surfaces of sunken slab, walls, junctions etc, by brooming with broom sweeping free from dirt dust etc & applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm complete all as specified and as directed.

M&L for PCC 1:5:10 type E2 using 40mm graded stone aggregate as in foundation filling and mass concrete (sunken floors etc.) complete all as specified and as directed.

Supply only necessary plasticizers complete all as specified and as directed. (Make:- Pidilite CF 21 by Pidilite, P211 by Fosroc, ShaliPlast LW+ by STP Ltd.) [Note : Contractor shall bring complete material incorporated in work with concern executive.]

Taking up or down carefully 15mm dia bore steel tubing and connection s including cleaning for refixing or removal to store of size complete all as specifed and directed.

S&F 15mm dia bore GI tubing tubes "medium grade" galvanized with all fittings and fixed complete to walls and ceiling or laid in floors etc (concealed type) complete all as specified and as directed.

Taking down /cutting steel windows shutter by means of gas cutter without disturbing of sofit / jambs / cills etc of any description not exc 1.5 sqm (without taking off Guard bar) complete all as specified and as directed.

S & F glass ventilators louver type using 4 mm thick plain/tinted glass, and using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc complete all as specified and directed. SP 20048 Glazing Clips 19352

S & F three track sliding window with two or more shutter with 4 mm thick tinted as approved glass, one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing, handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge:- (a) Bottom frame 20620 (b) Top frame & vertical 20621 (c) Handle (side) 20606 (d) Shutter inter lock 20724 (e) Shutter top & bottom 20844 (f) Glazing Clip 19352

Dismantling floor, hearth or wall tiling incl cement mortar bedding but not backing removing rubbish off the premises complete all as specified and as directed.

M&L for coloured Ceramics tiles 450x300x7to8mm thick in vertical surfaces such as skirting dado set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick rendering in cement mortar 1:4 on stone / brick/ concrete masonry surfaces complete all as specified and as directed.

M&L for Non skid ceramic colored tiles 7 to 8mm thick, (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc.set and jointed in neat cement slurry & pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer as in CM 1:6 complete all as specified and as directed.

Taking down chowkat with shutters (without taking off shutters from the frams) exe 1.5 Sqm but n'exc 4 Sqm each complete all as specifed and directed.

S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube, supplying and fixing in opening all as specified in item No. 884 of SSR Part-II complete all as specified and as directed.

S&F factory made prelam moulded solid panel PVC door shutter 30mm thick (stiles) consisting of frame made cut of M.S tubes for top & bottom rails; M.S frame shall be covered with heat moulded plain colour PVC ‘C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelaminated PVC sheet 5mm thick for top rail, lock rail and bottom rail and stile and rails having one side feathered edge, on other side 10mm 90° bent edge, panelling to be fitted in MS frame welded/sealed to the stiles and rails and 15mm thick PVC sheet beading inside and decorative PVC beading of 10mm x 10mm all as specified and directed and as per product Drg given on Sl. Page No. 157 of SSR Part-II 2010.

S&F aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified & directed.

S&F aluminium handles, anodised, cast type, of size 150 mm complete all as specified & directed.

S&F aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section etc length of bolt 250 mm complete all as specified & directed.

S&F aluminium powder coated fancy type curtain rod 20mm bore complete all as specified and as directed.

S&F aluminium powder coated fancy type curtain rod bracket for 20mm bore complete all as specified and as directed.

S&F in repairs bib tap of cast copper alloys chromium plated fancy type with capstan heads screwed down screwed for iron pipe or for brass ferrule and fixed for 15mm dia pipe inclduing removing the old unserviceable bib taps complete all as specified and as directed.

S&F in repairs pillars tap CP 15mm dia , cast copper alloy with swan neck pattern, screwed down high pressure with long screwed shanks and flynuts screwed for iron pipe and fixed complete all as specified and as directed.

S & F stainless steel sink 1mm thick of size bowl size 410mm x 330mm x 160mm for kitchen with plugs, washers and CP wastes coupling etc by engraving in cuddapa and granite kitchen platform as directed as per site requirement including fixing if necessary brackets and connecting union to pipe and 40mm dia etc complete all as specified and directed.

S&F in repairs vitreous china, squatting pan, 'Orissa' pattern, size 580 x 440mm white of first quality with integral foot rest, including concrete bedding including all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.

S&F in repair PVC Low level flushing cistern 10 ltrs capacity make ISI and first quality incl all internal fitting, pair of bracket, including inlet/outlet PVC pipe connections etc complete all as specified and as directed.

S&F in repair vitreous china wash hand basin of bowl type, white, 550x 400mm flat back including PVC waste pipe 32mm dia, CP brass waste coupling 32mm dia, PVC connection, and pair of MS bracket of required size etc all as specified and directed.

S&F in repairs stop valve cast copper alloy chromium plated fancy type screwed down high pressure with capstan head screwed both ends for iron pipe or for unions complete 15mm bore complete all as specified and as directed. (Make: Parryware Cat pat No T3511A or equivalent)

S&F in repairs cast iron floor/Nahani trap with grating 75mm and 300mm long waste pipe including jointing to waste pipe fixed in cement concrete type B-1 ( 1:2:4 ) including removing old traps complete all as specifed and directed.

S&F in repairs shower rose fancy type bass chromium plated 125 mm square heavy duty pattern with swivel joints type screwed for 15mm bore including jointing to pipe or unions complete all as specifed and directed.

S&F in repair stop valve cast copper alloy chromium plated fancy type with long shank and cup consealed type secrewed both ends for iron pipe or for unions and fixed in repairs of 15 mm bore complete all as specified and as directed.

S&F in repair Tubular towel rail 600mm long of 20mm chromium plated brass screws and wooden/plastic cleats complete all as specifed and directed.

S&F fancy type standard decorative corner glass shelves of glass 5-6 mm thick including cp decorative bracket (set of two) complete all as specified and as directed.

S&F in repair steel grating of 100mm in size for nahni trap/floor including jointing complete all as specifed and directed.

Demolition of stone slab and tiles of any description or thickness laid bedded as in floor/wall complete all as specified & directed.

S & F Machine cut cuddappa stone slab one side polished 20 to 25mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 20mm screed bed in cement mortar (1:6) including cutting for engraving kitchen sink etc directed as per site requirement

M & L for granite of Z black coloured (table rubbed and polished) in platform, shelves vertical partitions for urinals & like of 16 to 18 mm thick with admixture of pigment to match with shade of granite including rounding of one edge of stone slab as directed including cutting for engraving kitchen sink etc as directed as per site requirement including bedding layer in CM 1:4 etc complete all as specified and as directed.

S & F stainless steel Plate rack made of sheet grade SS-304, thickness not less 0.63 mm of standard size (36" x 36" x 10") & approved quality of finish, complete all as specified and as directed.

Taking down aluminium point wiring( light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants holder,regulators sockets, light fitting etc removing materials deposited to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.as per engr-in-charge.

Taking down old unserviceable / worn out aluminium sub main of any type and size

M&L for point wiring of any length using approved colour coding as per IS,with stranded copper conductor 1.5Sqmm (Nominal area),single core,PVC insulated and unsheathed stranded FRLS cable 1100 volts grade,ISI - 694 marked in and including heavy duty,PVC casing caping including all accessories etc.,heavy duty ISI marked,mild steel concealed sunken boxes,1.6 mm thick and 60 mm depth with earth dolly duly painted with two coat of black bituminious paint over a coat of red oxide primer with laminated bakelite sheet of min. thickness of 3mm suitable for switches / sockets etc, including PVC insulated stranded copper conductor 1.5 Sq.mm (nominal area) single core green PVC insulated FRLS cable as earth and connecting to earth dolly complete and including cutting and chases in the wall for box and all as specified for the following:- (Note:- Making good of disturbed surfaces will be done by contractor without any claims)

One light/fan/ point controlled by one switch.

One 5 Amps Socket outlet point controlled by one switch on independent board.

One 5 amps socket outlet point on same board with other switches

All as per item No. 3 here in above but wiring complete with 4.0 Sqmm for 3 pin 15 A socket multipurpose on independent board complete all as specified and as directed.

S&F piano type switch 5 amps single pole,240 volts complete all as specified and as directed.

S&F ceiling rose surface type three terminals,240 volts complete all as specified and as directed.

S&F socket outlet 5 amps 5 pin 230 volts flush type on same board complete all as specified and as directed.

S&F socket outlet multipurpose 2 in 1, 5/15 amps, 230 volts flush type complete all as specified and as directed.

S&F piano type switch 15 amps single pole,240 volts complete all as specified and as directed.

S&F lamp holder (Angle/bracket) insulated body, with back plate for batten fittings with 9 watt LED bulb complete etc. complete all as specified and as directed.

M & L for Sub main wiring complete with two single core 4 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 4 sqmm in and including PVC conduit complete all as directed by Engineer-in-Charge [Note :- (i) Making good of disturbed surfaces will be done by contractor without any claims. (ii) 3 runs of 4 Sqmm conductor and one run of PVC conduit shall be measured as one unit length.]

S&F MCB DB SPN 8 way ,double door, with 200 amp rated busbar 240 V,recess mounted including taking down old unserviceable MCB complete all as specified and as directed.

S&F MCB SP 6-32amps,10KA,'C' series including taking down old unserviceable MCB complete all as specified and as directed.

S&F MCB SPN 40-63 Amps, 10KA, 240V,'C' series including taking down old unserviceable MCB complete all as specified and as directed.

M & L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm burried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to a depth of not less than 1.5 m below ground level connected to and incl GI wire 4 mm dia and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover, watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete all as specified and as directed. (NOTE :- GI earth wire and protection pipe beyond 7.5m will be measured and paid separately)

M & L for fixing earth continuity conductor or main earth lead fixed to wall or buried in ground or drawn in GI pipe with 4 sqmm GI Wire complete all as specified and as directed.

Supplying and fixing LED tube light fitting complete with all fitting and fixing accessories, 1X20 Watt pre-wired with high efficiency electronic driver,glare free,smooth light distribution conforming to CAT Part No.Garnet 20 W LED (D532065) of Wipro or of equivelent in Havells / HPL / Philips complete all as specified and as directed.

S&F in replacement of sleek LED Cadila mirror light fitting complete in all respect having high output diffuser of 2 feet length,9 W LED.Cat Part No HLPLEDCAD09CW of HPL or of equivalent in Havells/Philips/Wipro make specified here- in - after.

Supply only integral water proofing comound complete all as specified and as directed.

Gauri Associates

SARATH ENTERPRISES

M/s.BAJRANG CONSTRUCTION

Raj Construction Company

M/S Sandeep Enterprises

M/s Omkar Associates

MANISH VEDPRAKASH ARORA