Beautification work Of Nagar Van Chamunda mata agar road corner at ward 18 Zone 05

PROVIDING AND INSTALLING OF WATER FOUNTAIN NOZZELS AS PER PHOTOGRAPH AND ENGINEER IN CHARGE.

STARTER WITH ON OFF BOX, WIREING

PROVIDING AND FIXING OF FOLLOWING ITEMS AS PER DIRECTION OF ENGINEER INCHARGE. A). providing laying jointing & fieldtesting of high density polyethylenepipes,(HDPE) confirming tols 4984/14151/12786/13488 with necessary jointing material like mechanical connector or jointing pipes by heating totheendsofpipes with hehelpof tefloncoated electricmeirror/ heater to the requiredtemperatureandthenpressingthe endstogetheragainsteachother, toforma monolithic & leak proof joint by thermosettingprocess. Itmaybe required tobedonewithJacks/HydraulicJacks/But fusionmachine. (50mm & above fusion jointed & below 50mm mechanical jointed) PE-100, 20 mm dia 8kg/sq.cm. (RM) 100 B). Providing and laying bend 90 confirming to IS specification 20 mm dia 8kg/sq.cm. (EACH)10 C). Providing and laying bend 45 confirng to IS specification 20 mm dia 8kg/sq.cm. (EACH)15 D). Providing and laying equal teeconfirming to IS specification 20 mm dia 8kg/sq.cm. (EACH)10 E). Providing and laying pipeendconfirming to IS specation 20 mm dia 8kg/sq.cm. (EACH)10 F).Providing and laying endcapconfirming to IS specation 20 mm dia 8kg/sq.cm. (EACH)5 G). Providing, laying, Jointing&fieldtestingof High Density Polyethylenepipes, (HDPE) confirmingtol54984/14151/12786/13488 with necessary jointing material like mechanical connector or jointingpipesby heatingtotheendsofpipeswiththehelpof Tefloncoatedelectricmirror/ heater to the requiredtemperatureandthenpressingthe endstogetheragainsteachother, toforma monolithic & leak proof joint by thermosettingprocess. Itmaybe required tobedonewithJacks/HydraulicJacks/But fusionmachine. (50mm & above fusion jointed & below 50mm mechanical jointed) PE-100 25 mm dia 8kg/sq.cm (RM) 70 H). Providing and laying end bend 90 confirming to IS specation 25 mm dia 8kg/sq.cm. (EACH)5 I). Providing and laying end bend 45 bend confirming to IS specation 25mm dia 8kg/sq.cm. (EACH)10 J). Providing and laying equal teeconfirming to IS specification 25 mm dia 8kg/sq.cm. (EACH)5 K). Providing and laying pipeendconfirming to IS specation 25 mm dia 8kg/sq.cm. (EACH)5 L). Providing and laying endcapconfirming to IS specation 25 mm dia 8kg/sq.cm. (EACH)5

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

ALL KINDS OF SOIL

ALL KINDS OF SOIL.

CEMENT CONCRETE GRADE M-10 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE

THERMO-MECHANICALLY TREATED BARS. (FE 500 D OR MORE)

"FOUNDATIONS, FOOTINGS, BASES OF COLUMNS, ETC. FOR MASS CONCRETE."

CEMENT CONCRETE GRADE M-20 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE.

"FILLING BY AVAILABLE EXCAVATED EARTH (EXCLUDING ROCK) IN TRENCHES, PLINTH, SIDES OF FOUNDATIONS ETC. IN LAYERS NOT EXCE

CEMENT CONCRETE GRADE M-10 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE

THERMO-MECHANICALLY TREATED BARS. (FE 500 D OR MORE)

"FOUNDATIONS, FOOTINGS, BASES OF COLUMNS, ETC. FOR MASS CONCRETE."

CEMENT CONCRETE GRADE M-20 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE.

CEMENT MORTAR 1:4 (1 CEMENT : 4 COARSE SAND)

THERMO-MECHANICALLY TREATED BARS. (FE 500 D OR MORE)

"FOUNDATIONS, FOOTINGS, BASES OF COLUMNS, ETC. FOR MASS CONCRETE."

"LINTELS, BEAMS, PLINTH BEAMS, GIRDERS, BRESSUMERS AND CANTILEVERS."

CEMENT CONCRETE GRADE M-20 (NOMINAL MIX) WITH 20 MM MAXIMUM SIZE OF STONE AGGREGATE.

"REINFORCED CEMENT CONCRETE WORK IN BEAMS, SUSPENDED FLOORS, ROOFS HAVING SLOPE UP TO 15° LANDINGS, BALCONIES, SHELVES,

BRICK WORK WILL WELL BURNT OPEN BHATTA BRICKS CRUSHING STRENGTH NOT LESS THAN 25KG/CM² AND WATER ABSOPTION NOT MORE THAN

1:4 (1 CEMENT: 4 SAND)

APPLYING ONE COAT OF CEMENT PRIMER OF APPROVED BRAND AND MANUFACTURE ON WALL SURFACE : CEMENT PRIMER.

NEW WORK (TWO OR MORE COATS APPLIED @ 1.43 LTR/ 10 SQM. OVER AND INCLUDING PRIMING COAT OF EXTERIOR PRIMER APPLI

AREA OF SLAB OVER 0.50 SQM.

"PROVIDING AND LAYING RECTIFIED GLAZED CERAMIC FLOOR TILES 300X300 MM OR MORE (8MM TO 10MM THICK) OF 1ST QUALITY CONFORM

"PROVIDING AND LAYING RECTIFIED GLAZED CERAMIC WALL TILES 300X450 MM OR MORE (8MM TO 10MM THICK) OF 1ST QUALITY CONFORMI

"PROVIDING AND FIXING STAINLESS STEEL ( GRADE 304) RAILING MADE OF HOLLOW TUBES, CHANNELS, PLATES ETC. INCLUDING WELDING

HOT FINISHED WELDED TYPE TUBES.

PAINTING STEEL WORK WITH DELUXE MULTI SURFACE PAINT TO GIVE AN EVEN SHADE. TWO OR MORE COAT APPLIED @0.90 LTR/

"SUPPLYING, STACKING AND SPREADING OF GOOD EARTH FOR PLANTATION AT SITE INCLUDING ROYALTY AND CARRIAGE (EARTH MEASURED I

"PLANTING PERMANENT HEDGES INCLUDING DIGGING OF TRENCHES, 60 CM WIDE AND 45 CM DEEP, REFILLING THE EXCAVATED EARTH MIXED

"PLANTING OF TREES AND THEIR MAINTENANCE FOR ONE YEAR (PLANTING OF TREES BY THE ROAD SIDE (AVENUE TREES) IN 0.60 M DIA H

"EDGING WITH 2ND CLASS BRICKS LAID DRY LENGTH WISE INCLUDING EXCAVATION, REFILLING, CONSOLIDATING WITH HAND PACKING AND

"PROVIDING AND LAYING MEXICAN/ZYOSIA CARPET GRASS TURF WITH EARTH 50MM TO 60MM THICKNESS ON EXISTING GROUND PREPARED WIT

SHRUBS :-

CREEPER PLANTS (HEIGHT:30CM TO 45 CM)

GROUND COVER PLANTS HEIGHT: 30CM-45CM

WINTER SEASONAL HEIGHT: 20-30 CM

"ROSE BUDDED OF H.T VARIETY AND MINIATURE ROSES. HEIGHT: 30CM & ABOVE"

PLANT CREEPER ROSE VARIETIES

STANDARD ROSES H.T. VARIETY

"PROVIDING AND LAYING 60 MM THICK FACTORY MADE CEMENT CONCRETE INTERLOCKING PAVER BLOCK OF M -30 GRADE MADE BY BLOCK MAK

"PROVIDING AND LAYING 80MM THICK FACTORY MADE CEMENT CONCRETE INTERLOCKING PAVER BLOCK OF M -40 GRADE M

CRUSHER STONE DUST

RED SAND STONE.

"PROVIDING AND FIXING STRUCTURAL STEEL FRAME (FOR DRY CLADDING WITH 30 MM THICK GANG SAW CUT WITH MACHINE CUT EDGES SAND

RED SAND STONE

PROVIDING AND FIXING STAINLESS STEEL CRAMPS OF REQUIRED SIZE AND SHAPE FOR ANCHORING STONE WALL LINING TO THE BACKING OR

PROVIDING AND FIXING STONE DOWELS 10X5X2.50 CM CUT TO DOUBLE WEDGE SHAPE AS PER DESIGN IN CEMENT MORTAR 1:2 (1 CEMENT :

RED SAND STONE:

RED SAND STONE:

LIGHT POINT/FAN POINTS.SHORT POINT

LIGHT POINT/FAN POINTS.SHORT POINT

3 METER HEIGHT

COLOURED LAMP 70W ISI MARKED

300MM TO 600MM

125 WATT M.V. LAMP

SUPPLYING, ERECTION & COMMISSIONING OF 3 MTR. LONG GARDEN LIGHT POLE HAVING