MLA FUND 2023-24 - Improvement Of Dobhi Kana at periyar River Bed in Kadayanallur Municipality

Amount

Earthwork excavation in all classes of soil consisting of gravelly soil including all labour charges as per SS20B etc. complete

Plain Cement Concrete 1:4:8 mix using 40 mm HBG ISS metal including cost, conveyance of all materials, labour charges and all other incidental charges etc. complete

Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90X60cm & 10 gauge stiffened, welded with steel angle of size 25 X25 X 3mm for boarding laid over silver oak joists (Country wood) of size 10X6.5cm spaced @ about90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2. for the following items. (RCC floor slab, roof slab, Rectangular / square, Tee / Ell beams, Lintels, staircase waist slabs, Landing slabs, Landing beam, Portico beam etc.,)

Random rubble masonry in c.m 1:5 (one cement five Sand) using best new rough and bond stones including simultaneous pointing above ground level with the same mortor and cost of all materials and labour charges etc,complete as per SS..[MoRTH Specfication

Brickwork in cm 1:5 mix using country bricks including cost conveyance of all materials, labour charges and all other incidental charges etc complete

Plain Cement Concrete 1:2:4 mix using 20 mm HBG ISS metal including cost, conveyance of all materials, labour charges and all other incidental charges etc. complete

Plastering with cm 1:3 mix to 10mm thick including cost, conveyance of all materials labour charges and all other incidental charges therefore etc. complete

Plastering in cement mortar 1:5 (one cement, five sand) using 12mm thick including cost and conveyance of all materials and labour charges etc, complete as per standard specification. TNDSS NO: 61 V,VI (S4)

Floor Finishing First Quality Design Ceramic tiles of All colours of sizes 305mm x 305mm x 6mm. laid in cm 1:3 mix 10mm thick and pointing with white cement using 0.4kg/sqm including finishing the joint and pointing flush with tiles surface etc complete

Conducting the geological survey including cost and all labour charges etc., complete

Drilling of 150mm dia deep borewell in hard rock area including cost and conveyance of all material and all labour charges for tools and plants etc., complete

Supplying and fixing of 180mm dia 6kg / cm2 casing pipe including all materials and labour charges etc., complete

Supply and delivery of 2 HP submersible Pumpset including cost and all labour charges etc., complete

Supply and delivery of panel board with ammeter voltmeter with auto restart facility including all cost and conveyance of materials to site and all labour charges etc, complete.

Supplying and delivery of 4 sqmm 3 core copper cable including cost of materials etc., complete

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC.unsheathed Cu. Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T. switch with painting of suitable Colour for open PVC light point / fan point (For electronic regulator) (6points per coil)

Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x l00 x 113 mm TW switch box for 5 A 3 pin non inter locking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point.

Wiring with 2x4 sqmm(56/0.3) PVC insulated SC unsheathed Cu.Conductor cable of 1100V grade in suitable pipe on wall and ceiling with PVC accessories with 150 mm x 100 mm x 63mm TW switch box for 15 A 3 pin non inter locking CS plug with painting of suitable colour, with continuous earth wire connection of 14 SWG TC wire for open PVC power plug point.

Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting.

Supply and fixing of 4'40 W twin street light flu. fitting complete With copper choke and condensor with 19mm dia GI pipe (Class 'B') with 1 No. 19mm GI Bend complete on the existing post / wall With 16 A aerial fuse unit on MS plate with PVC unsheathed Cu. leads, with MS clarnps and aluminium painting with Flu. Tubes

Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1" x 1/8" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit.

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wire for service connection mains

Towards Labour charges for erection of submersible motor upto 2 HP

Supply and delivery of following pipe and special including all cost and conveyance of materials to site and all labour charges etc, complete. (A)32 mm UPVC Pipe

32 mm GI Pipe

Painting two coats with ready mixed Plastic Emulsion Paint S.I.358 Plastic emulison paint of'approved quality and colour over a priming coat, including thorough scraping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required including cost and conveyance of all materials etc.and all lobour charges etc.complete as per Standard specification and as directed by the departmental officers. TNBP No:66-A (Sl.No.358)

Painting two coats over new iron work with ready mixed paint of apprved quality and colour including cost of all materials and labour charges etc complete as per SS

Plain Cement Concrete 1:3:6 Mix (one cement, three Sand and six aggrigate) using 20 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc. complete. Complying with std. specifications.. TNDSS NO: 24

S K MUTHUKRISHNAN (BID ID -1216600)