WBPWD/EE/PMED/NIQ-06/2024-25

Amount

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed] Avg. run 8mtr.

S&drawing 1.1 kv single core stranded FR PVC insulated &unsheated single core stranded cupper wire (approved make)of the following sizes prelaid poly pipe. & by the Gifish wire & making necy connection as required.

a) 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC (From HTPN DB to SPN DB)

b) 2X 56/0.3( 4 sqmm) + 1 X 36/0.3( 2.5 sqmm) as ECC ( From HTPN DB to AC )

b) 2X36/0.3(2.5 SQMM)+1*22/0.3(1.5SQMM) as ECC (For Power Plug & Computer Point)

c) 3 X 22/0.3( 1.5 sqmm) [ only Separate Board]

Cutting Channel of size(40mmx40mm) on masonry wall by Electric operated cuttingmachine incl. supplying & fixing heavy gauge 19mm,3mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8SWG incl.supplying and drawing18SWGGIwire as Fish wire and mending good damages to original finish by using own tools and tackles

19 mm dia 3 mm thick polythene pipe

25 mm dia 3 mm thick polythene pipe

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

Supply & Fixing 240 V, 2 nos. 6A, plug socket with separate 2 nos 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 175x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover, incl. S & F 3 nos copper bar( Ph, N, E) and making necessary connections as required.

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch with indicator & 16A kit-kat flush type fuse (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240 x 200 x65mm MS (16SWG) switch board with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supplying and fixing 415 V, 25-32A per way, 6way TPN MCBDB with SS enclosure double-door with IP-42/43 protection with 63A Four Pole Isolators as incomer and 18 non SPMCBs ('C' Curve, 10 kA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment, 1no. 63A FP Isolator, 18 no. (16-32A) SPMCB. (Make-Siemens/ Legrand/ Schneider)

Supplying and fixing 250 V, 6-10A per way, (2+12)SPN MCBDB with SS enclosure double-door with IP-42/43 protection with DP Isolators as incomer and SPMCBs ('C' Curve, 10kA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment, 1 no. 40A DP Isolator, 12 no. (6-16A) SPMCB). (Make-Siemens/ Legrand/ Schneider)

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections.

Supply & Delivery of 4 core 16 sqmm size 1.1 kv.gr.XLPE insulated 1100V Grade as per IS 7098 (part 1) 1988 armoured sheathed Aluminium conductor cable. [Make - Polycab /Havells/Gloster/ carrency]

Laying of cable 4 core 16 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting.

Laying of cable 4 core 16 sqmm, after cutting wall and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish.

S & F compression type brass cable gland 4 core 16 sqmm complete with brass gland, brass ring & rubber ring for dust & moisture proof entryof XLPE/PVC armoured cableas & Finishing the end of the following XLPE/PVC armoured cableas by crimping method incl. S&F solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials:

Supply and Delivery of 240V 50 Hz 48" sweep (1200 mm) ceiling fan complete with down rod,Canopy,fork etc. and Fixing the ceiling fan complete with blades, canopy, fork, rubber bush etc. (Make- Orient- summer breeze/ USHA/ Crompton)

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991)

Fixing only single/twin florescent light fitting complete with all accessories Directly on wall/ceiling with 'L' clamp and suitable size MS fastener, Ceiling plate, nipples etc. as required.

Fixing of single/double LED tube light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side inserted within the ceiling reinforcement and other side connected with the suitable size of bolts and nuts incl. S&F EI conduit “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. with S & F 2x24/0.20 mm flexible copper wire of 1.10 mt. length. incl. 2nos mounting kit.

Supply and delivery of 230V, Single LED tube light fittings incl. all acc. (Make: Philips cat no.- TMC 501 P 1xT-LED 22W P3241 incl 1no. 18W master LED tube 2100 lm PC body./ Wipro/ Crompton/ Havells)

Supply and delivery of 230V, double LED tube light fittings incl. all acc. (Make: Philips cat no.- TMC 501 P 2xT-LED 22W P3242 incl 2no. 18W master LED tube 2100 lm PC body./ Wipro/ Crompton/ Havells)

S & F of 9Watt Led lamp. (Make- Philips/ Bajaj/ Crompton)

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board.

Supply of Full Matal Body Wall Fan complete with blades, canopy, fork, rubber bush etc as per GS (Make -Crompton ) 450 mm ( SSTORM 2)

Supplying and fixing 415V, 200 A (TPN SFU)[ L&T ] TPN SFU with sheet steel enclosure on Angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating.

Supply & Delivery of 1.5 Tr Hi-wall Split Air Conditioner having following specification. Cooling Capacity - 5.2 kW (minimum) ISEER-3.59 (minimum) BEE Leveling : 2-Star or higher (July22-October24) IS compliance - IS 1391 Refrigerant - R410A/ R32 Compressor - Rotary/Scroll Evaporator & Condensor Coil : Copper Operating Outdoor Temparature = 50ºC and above Power Supply - 230V,50Hz ( +Tolerrance as per applicable standard) The scope of work is also includes supply of following (i) Necessary refrigeration copper line with nitrial rubber insulation - 3 mtr (ii) necessary copper cable (FRLS type - make : Finolex/RR Kable/Polycab/Havells/Gloster) - 3mtr [Make: Mitsubishi Electric / O General / Daikin]

Supply & Delivery of Hi-wall Split Air Conditioner having following specification. Cooling Capacity - 6.6 kW (minimum) ISEER-3.57 (minimum) BEE Leveling : 2-Star or higher (July22-October24) IS compliance - IS 1391 Refrigerant - R410A/ R32 Compressor - Rotary/Scroll Evaporator & Condensor Coil : Copper Operating Outdoor Temparature = 50ºC and above Power Supply - 230V,50Hz ( +Tolerrance as per applicable standard) The scope of work is also includes supply of following (i) Necessary refrigeration copper line with nitrial rubber insulation - 3 mtr (ii) necessary copper cable (FRLS type - make : Finolex/RR Kable/Polycab/Havells/Gloster) - 3mtr [Make: Mitsubishi Electric / O General / Daikin]

Installation,Commissioning and testing of 2.0/1.5 ton split type AC machine both indoor/outdoor including fixing of 40 x 40 x 5 mm MS angle iron frame and mending good the damages.(incl. laboue cess)

Supply and delivery of (I) Copper pipe 3/8"/1/2" for liquid as required. (III) Copper pipe 5/8" / 1/4"for suction as required (IV) Insulation Foam 3/8" / 1/2" for liquid as required. (V) 5/8" / 1/4"for suction as required.

Supply and laying of 3 core 2.5 sqmm 1.1kv grade xlpe insulated round flexible copper cable. (Make:- Havells/ Gloster/ KEI/ carrency)

PVC flexible Drain pipe for drainage of water for Split A.C. both indoor and outdoor unit.

Rigid 32mm PVC water pipe with 10mm nitral rubber insulation & Al strip tapping including Tee, bend,plug, socket etc. As required.

01 ( one) no A.C Machime shifting from ADJ room to ACJM Sd room incl all accessare

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as by ISI-Medium GI pipe

Extra for providing masonry enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement mortar (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required as to GS.

Connecting the equipments body to earth busbar incl. S & F 25 mm x 6 mm Galvanized (Hot Dip) MS flat on wall/floor with GI saddle as required and connection to equipments with incl. drilling holes, bolts, nuts,washers etc.

Excavation of morrum soil for installation of Earth Electrode and filling & ramming.

S & Laying of 50 mm dia GI cable protection pipe (ISI-M) and necessary fittings and jointing materials as required.

TAPAN ELECTRICS

MAHESWAR ELECTRICAL INDUSTRIES

B. ENGINEERING CO.