SPL REP OF BLDG NO P-20/1TO4(OR MD ACCN) AT URANVIHAR 1(I)RANDO FLT BLDG NO EW3/1EW3/2EW1/4(ORMDACCN) DIDLINE PROVN OF DRAIN NEAR QTRNO T30A TPTLINE AND SEWAGE SINGLE MEMBER LINE WITH CHAMBER BLDG NO T17TOT19(OTM)OF1JAK LI (APPX 100 M)UNDER GE RANCHI

Amount

Demolition of cement concrete incl (unreinforced) in ground floors and paving n exc 15 cm thickness, complete all as scpecified and directed. (Below or above ground level)

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specially provided for, complete all as scpecified and directed.

Demolition of brick work built in cement mortar, complete all as scpecified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specially provided for, complete all as scpecified and directed.

Taking down existing chowkats or frames, without taking out shutters, from the frame, n exc 1.5 Sqm, complete all as scpecified and directed.

Taking down existing chowkats or frames , without taking out shutters, from the frame, exc 1.5 Sqm but not exc 4 Sqm each, complete all as scpecified and directed.

Taking up or down 25 mm steel tubing and connections including cleeaning for refixing or removal to store, complete all as scpecified and directed.

Taking up or down 20 mm steel tubing and connections including cleeaning for refixing or removal to store, complete all as scpecified and directed.

Taking up or down 15mm steel tubing and connections including cleeaning for refixing or removal to store, complete all as scpecified and directed.

Dismantling water tanks exc 250 & n exc 500 litres removing to store, complete all as scpecified and directed.

Dismantling floor, hearth or wall tiling including cemenet mortar bedding, removing serviceable tiles to store and rubbish off the premises, complete all as scpecified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. including brushing neat cement slurry with 3.0Kg of cement per Sqm, complete all as scpecified and directed.

Taking down cement plaster of any description on brick or stone walls etc. including raking out joints, hacking for key, scrubbinng down with water, etc, complete all as scpecified and directed.

M&L for Plain Cement Concrete 1:2:4 type B-1 using 20mm graded aggregate as in floor, 40 mm thick finished making even and smooth using extra cement, complete all as scpecified and directed.

M&L for Plain Cement Concrete 1:2:4 type B-1 using 20mm graded aggregate, 25mm thick as in sub-base floor to receive the floor tile, complete all as scpecified and directed.

M&L for Plain Cement Concrete 1:3:6 type C2 using 40mm graded aggregate as in floor, 75mm thick as in Plinth protection finished even and smooth without using extra cement, complete all as scpecified and directed.

M&L brick work with sub class ‘B’ old sized bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all as scpecified and directed.

All as per item No17 above but except bricks, complete all as scpecified and directed.

M&L Brick work with sub class 'B' Brick straight or curved on plain to any radius in half brick thick wall built in cm 1:4, complete all as scpecified and directed.

All as per item No 19 but except bricks, complete all as scpecified and directed.

M&L extra for forming fair finishing to drain or channel, 30 cm inner girth in cement concrete, with using extra cement, including forms, moulds, mitred/stopped ends etc, complete all as specified and directed

M&L rendering 15mm thick in CM 1:6 on fair faces of brick work , finished even and smooth without using extra cement, complete all as scpecified and directed.

M&L rendering 15mm thick in CM 1:4 on fair faces of brick work , finished even and smooth without using extra cement, complete all as scpecified and directed.

M&L rendering 10mm thick in CM 1:3 on fair faces of concrete finished even and smooth in ceilings, complete all as scpecified and directed.

M&L for preparing of new plastered surfaces and applying two coat of white wash on ceiling, complete all as scpecified and directed.

M&L for preparing of Old plastered surfaces and applying one coat of white wash on ceiling, complete all as scpecified and directed.

M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resisteance as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade ( Company Depot tinted) with silicon additives @ 1.43 litre /10 sqm over and including priming coat of exterior primer appplied @ 0.90 litre /10sqm over a coat of wall putty. over a coat of putty on new plastered wall surfaces incl preparation, complete all as scpecified and directed.

M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resisteance as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade ( Company Depot tinted) with silicon additives @ 1.43 litre /10 sqm over and including priming coat of exterior primer appplied @ 0.90 litre /10sqm over a coat of wall putty on old wall surfaces incl complet removal of existing treatment, complete all as scpecified and directed.

M&L for complete removal of existing treatment over wall and applying two coat of distemper oil emulsion over alkali resistant primer and 1.5mm thick wall care putty, complete all as scpecified and directed.

M&L for preparing new plastered surfaces of wall and applying two coat of distemper oil emulsion over alkali resistant primer and 1.5mm thick wall care putty, complete all as scpecified and directed.

M&L rendering 10mm thick in CM 1:4 on fair faces of brick work , finished even and smooth without using extra cement, complete all as scpecified and directed.

S&F factory made solid PVC door frame of size 48 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete as per manufacturer’s specification and drawing, complete all as scpecified and directed.

S&F factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of mild steel tubes for top & bottom rails, Mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm with steel inside with solvent cement for stiles and plain colour PVC sheet for top rails, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, fixing in the frame at site as per specification, drawing, complete all as scpecified and directed.

All as per item No 33 above but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S Solid tube and this tube shall be welded to M.S tubes. The wire gauge shall be stretched to tighten firmly.

S&F 150 mm long aluminium anodised barrel bolt extruded section, complete all as specified and directed.

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete, of frame size 165 x 60 mm, complete all as scpecified and directed.

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, look strike plate etc completed, as spd size of frame 105x 60mm, complete all as scpecified and directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (style), with particle board core and 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as scpecified and directed.

S&F factory made wire gauzed PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded both side prelam PVC Sheet and stile & rails feathered at edges having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail and bottom rail on either side and as gap inside for top rail and bottom rail.panel will be wire gauze in lieu of prelam sheet ,the wire gauze shall be wrapped on an additional square 8mm M.S.Solid tube and this tube shall be welded to M.S tube. the wire gauge shall be stretched to tighten firmly supplying and fixing in the frame at site as per specification and drawing, complete all as scpecified and directed.

S&F in repair Harrison rails (Curtain rails), mild steel, chromium plated including with supply & fixing brackets, stops, rollers etc, complete all as scpecified and directed.

S&F in repair aluminium anodised tubular towel rail 20mm dia D Type, 60 cm long between flanges, complete all as scpecified and directed.

S&F 100 mm size butt hinges of medium weight cold rolled mild steel.

S&F extruded aluminium anodised alloy handles, fabricated type, size of handle 150 mm.

S&F aluminium, anodized 200mm long barrel tower bolts of extruded section, complete all as scpecified and directed.

S&F aluminium alloy, anodized slidnig door bolt with hasp and staple and fixing clips of sheet, cast or extruded section, and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed length of bolt 300 mm, complete all as scpecified and directed.

S&F 75mm size butt hinges of medium weight cold rolled mild steel, complete all as scpecified and directed.

S&F extruded aluminium anodised alloy handles, fabricated type, size of handle 125 mm, complete all as scpecified and directed.

S&F aluminium, anodized 100mm long barrel tower bolts of extruded section, complete all as scpecified and directed.

S&F 150 mm ordinary rat tail rod pattern springs including roller and roller plate, complete all as scpecified and directed.

S&F GI tubing 25mm dia GI Medium grade with all new fittings and fixed to wall/ floor, complete all as scpecified and directed.

All as per item No 50 above but 20 mm dia.

All as per item No 50 above but 15 mm dia.

Refixing of old serviceable steel water tubing 15 mm dia in position complete with new fitting in wall / floor, complete all as scpecified and directed.

All as per item No 53 above but of 20 mm dia.

M&L Non skid ceramic joint free coloured tiles 7-8 mm thick (square or rectangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement. to match as in floors, complete all as scpecified and directed.

All as per item No 55 but on vertical surfaces such as skirting, dado, risers to steps etc, complete all as scpecified and directed.

M&L non skid ceramic joint free coloured tiles 7-8 mm thick (square or rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement. to match as in floors, complete all as scpecified and directed.

All as per item No 57 above but as in verticle surface/skirting, complete all as scpecified and directed.

M&L for glazed ceramic coloured tiles in vertical surfaces 350 X 250X 7 /450x350x7mm th set and jonnted in cement slurry and pointed in white or colour cement to match, complete all as scpecified and directed.

Demolition of stone slabs and tiles laid dry or laid dry and pointed of any description or thickness in floors, aprons etc, complete all as scpecified and directed.

M&L granite 18 to 20 mm thick (of any type )work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as scpecified and directed.

M&L for providing cement mortar 10 mm thick in CM 1:4 as backing coat for laying tiles in dado , on brick or concrete surfaces, complete all as scpecified and directed.

M&L screed bed or bedding layer of mortar 15 mm thick for layinng floor finishes in CM 1:6 for fixing tiles, complete all as scpecified and directed.

S&F framed work such as grills, gratings etc. With ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming Fe 290, Gde -E -165

M&L in repair for 75mm dia PVC (SWR) trap , plain with gratin g including jointing with solvent cement, complete all as scpecified and directed.

S&F in repairs PVC valve less,low level flushing cistern ,10 ltr capacity, white symphonic action with inlet, ball valve, float and handle including 32mm PVC flushpipe and brackets, complete all as scpecified and directed.

S&F in repair 15mm dia bib taps,cast copper alloy chromium plated fancy type with crutch or butter fly and screwed for iron pipe or for brass ferrule and fixed.

Supply only 15mm bore pillar taps chromium plated cast copper allow fancy type with screwed shancks and fixed.

S&F in repairs stop valves fancy type of 15 mm dia chromium plated long shank and cup (concealed type) screwed both ends for iron pipes or for unions.

S&F in repairs stop valves (angle cock) fancy type of 15 mm dia chromium plated screwed down, high pressure, with crutch or butter fly handle screwed both ends for iron pipes or for unions.

S&F 25 mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass ferrule, complete all as scpecified and directed.

S&F PVC connection 450mm long with two brass coupline.Pipe of 15mm dia of pressure tating 6kgs/Cm2, complete all as scpecified and directed.

S&F in repairs Brass Chromium plated shower rose with swivel joints, 125 mm size, including fixing to stel pipe or union, complete all as scpecified and directed.

S&F 32 mm dia High density polyethylene pipes (HDPE) of pressure rating 6Kgf/cm2 for kitchen sink and wash basin fixed in repairs, complete all as scpecified and directed.

S&F PVC (SWR) 110mm bore dia pipes single socketed, in any length with rubber ring joints, fixed to walls including taking out old PVC unserviceable pipes, complete all as specified and directed.

S&F PVC (SWR) 110mm bore bends with access door.

S&F PVC (SWR) 110mm bore junction single, (Single T) equal or unequal.

S&F PVC (SWR) bends 110mm bore.

S&F PVC (SWR) vent cowl 110mm bore.

S&F PVC (SWR) 75mm bore dia pipes single socketed, in any length with rubber ring joints, fixed to walls including taking out old PVC unserviceable pipes, complete all as scpecified and directed.

PVC (SWR) bends 75mm bore.

S&F steel windows with side hung shutters including projection type hinges with one no. steel handle made of 25x3mm FI approx 200mm long in each leaf and two nos MS tower bolt 150mm long in each leaf with locking device, complete with glazing bars, dovetailed or welded incl cutting holes and making good with brick and plaster.

All as per item No 82 above but without glazing bars complete all as specified and directed including sash bars for fixing wire mesh.

S&F Steel ventilator in repair with top hung shutter including hinges steel peg stay, complete all as scpecified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty/ glazing pins/spring clips in square n exc. 0.5 sq. m in each pane, complete all as scpecified and directed.

S&F 4 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 Sqm in each pane, complete all as scpecified and directed.

M&L for Stainless Steel wire cloth for 0.56 mm nominal dia of wire & average width of aperture 1.18mm fixed with tinned tacks or galvanised wire staples etc, complete all as scpecified and directed.

M&L for preparation of new steel surafces of any description not otherwise described, over 10 cm width or girth, priming with a coat of red oxide primer and applyinng 2 coats of synthetic enamel paint of approved shade, complete all as scpecified and directed.

M&L for preparation of new wooden surafces of any description not otherwise described, over 10 cm width or girth , priming with a coat of pink primer and applyinng two coats of synthetic enamel paint of approved shade, complete all as scpecified and directed.

M&L for preparing old painted steel surfaces of any description not otherwise described, over 10 cm in girth or width and applying one coat of synthetic enamel paint of approved shade, complete all as scpecified and directed.

S&F Glass Shelf assembly consisting of 5.5mm thick sheet glass with CP brackets and CP frame size 600mm long, complete all as scpecified and directed.

S&F in repairs Vitreous china Squatting pan, "Orissa Pattern" size 580 X 440 mm, white with integeral foot rests ( excluding Flushing cisitern and flush pipes) fixed in repairs including concrete bedding with Traps ‘P’ or ‘S’ 100mm bore, complete all as scpecified and directed.

S&F GI tubing 50 mm dia GI Medium grade with all new fittings and fixed to wall/ floor, complete all as scpecified and directed.

Brushing neat cement slurry with 3 Kg of cement per Sqm, complete all as scpecified and directed.

M&L for bitumen blown any grade, applied hot two coats to concrete surfaces at the rate of 1.50 Kg/Sqm per coat, complete all as scpecified and directed.

M&L for polythene film, 200 microns laid in floors or in sunken slabs, pasted over a coat of hot blown bitumen, including laps, complete all as scpecified and directed.

M&L PCC 1:5:10 type E-2 (using 40 mm graded stone agg) as in filling for sunken, complete all as scpecified and directed.

M&L 10 mm thick rendering in CM 1:4 mixed with WPC as per manufacturers instructions to have smooth surface, complete all as scpecified and directed.

M&L Providing, cement concrete type B1 1:2:4 (20 mm graded aggreate) in filling of pressed steel frame, coping, fixing of hold fast and water troughs and the like including weathering etc similar work, complete all as scpecified and directed.

All as per item No 100 above but reinforced cement concrete as in cooking slab.

S&F in repairs Vitreous china white wash hand basin flat back of size 550x400mm, cutting for and pinning ends of brackets.

M&L Mild steel bars 10mm dia TMT Bars and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to, complete all as scpecified and directed.

S&F 500 Ltrs capacity Rotational moulded polythene water storage tanks, two layered white colour (cylindrical vertical with closed top) hoisted and fixed in position, complete all as scpecified and directed.

S&F Gun metal globe or Gate valves 25 mm bore with iron wheel head, screwed both ends for iron pipe or for pipe or for unions and fixed.

S&F Gun metal globe or Gate valves 20 mm bore with iron wheel head, screwed both ends for iron pipe or for pipe or for unions and fixed.

S&F in repairs sink with drainage board made of stainless steel 1mm thick kitchen with plug washers and waste coupling and pipe incl cantilever brackets and connecting union to pipe overall size 915x460mm, bowl size 410x330x160 mm.

S&F stainless steel plate rack 1mm thick of size 750X600mm and depth 250 mm ,fixed on wall surface as per manufacturer's instruction and making good the surfaces, complete all as scpecified and directed.

S&F 40 mm High density polyethylene pipes (HDPE) of pressure rating 6 kgf/sqcm incl all fittings such as bend fixed complete to walls, ceilings or in floor etc including taking out old PVC unserviceable pipes, complete all as scpecified and directed.

Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 in brick walls for concealed water tubing, cutting not exc 10cm girth, complete all as scpecified and directed.

Demolition of Brick tiles or terracing tiles, single layer on roofs, complete all as scpecified and directed.

M&L rendering 10 mm thick in CM 1:3 on fair faces of brick work/concrete surface using polymers based liquid water proofing compound as in roof, complete all as scpecified and directed.

Supply only liquid water proofing compound as per manufacture instruction, complete all as scpecified and directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of grooves with cement mortar 1:3, complete all as scpecified and directed.

M&L for applying evenly a tack coat of Industrial Bitumen 85/25 grade @ 1.20 Kg per SM meter as in roof complete all as per manufacturer instrcution, complete all as scpecified and directed.

M&L for laying APP based polymeric membrane minimum weighing 3kg/ sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) including bitumen primer @ 0.3 Kg per Sqm by torch application method (overlap while torching shall be 75 mm on length and 100mm width side). All angles & abutments should sealed with extra care to ensure full bondage and cutting out grooves where necessary as per manufacturers instructions, complete all as scpecified and directed.

M&L Cement concrete tiles 25cm x 25cm x 20-22mm thick machine pressed , laid over a bedding layer of 20mm screed in CM 1:4 as in roof cut and polished. The CM shall be mixed with polymer based liquid water proof additive @5% by weight of cement or as per manufacturer’s instructions and tile joints shall be filled with polymer based cement proof joint filler manufactured by approved company, complete all as scpecified and directed.

M&L For PCC 1:2:4 type B-0 using 12.50 mm aggregates as in roof kerbs or mud stops, rounded or chamfered on edges, complete all as scpecified and directed.

Extra over rendering on plastering for walls/roof facia sides in isolated width not forming part or general plastering n.exc 15 cm, complete all as scpecified and directed.

Errection only including necessary welding,repairing/replacing old corroded MS sheet with new, and builder harware as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete, drilled for fixing of steel sheeting or other covering.Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running, rails and guides) and hanging: also fastening and fixing, complete all as scpecified and directed.

M&L cement concrete type D-2, 1:4:8 (40 mm graded aggregate) 100 mm thick as in Sub-base of floor, complete all as scpecified and directed.

M&L machine pressed precast concrete interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade laid over sand cushioning, complete all as scpecified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation, complete all as scpecified and directed.

Dismantling asbestos cement 6mm thick (corruga ted, semi corrugated, etc.) sheets in roof coverings, complete all as scpecified and directed.

Dimantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as scpecified and directed.

Dismantling timber scantling 40 sqcm and over in section in any position in un-framed work, complete all as scpecified and directed.

Dismantling of wall and ceiling board any thickness/description including cover fillet, complete all as scpecified and directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, complete all as scpecified and directed.

S&F prepainted galvalum aluminium zink coating GI based corrugated/ semi - corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with coach screw as per manufacturers instrution, complete all as scpecified and directed.

S&F for pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall and ridge,fixed with self tapping screws, complete all as scpecified and directed.

S&F, 6 mm thick Non-asbestos cement corrugated sheet fixed with ‘L’ type or ‘J’ type or cranked hook bolts, complete all as scpecified and directed.

Fixing only 6 mm thick asbestos cement corrugated sheet fixed with ‘L’ type or ‘J’ type or cranked hook bolts, complete all as scpecified and directed.

S&F Powder coated GI frame work for false ceiling of size of grid 605 x 605mm (consisting of angle or tee section size 24 x 24 x 1.5mm thick angle section and 24 x 32 x 1.5 mm Tee Section) Powder coated GI snap grid hanging with 02 mm dia GI hanger/wire fixed with steel dashed fastners, complete all as scpecified and directed.

M&L 4mm thick non asbestos fibre cement designer building board of size 600X600 fixed or laid/inserted to timber/GI/Aluminium framework fixed in ceiling flat or sloping, complete all as scpecified and directed.

M&L Brick wk with sub class ‘B’ bricks straight or curved on plan exc. 6m means radius in CM 1:6, complete all as scpecified and directed.

M&L preparation of new surface of wall and applying three coats of white wash, complete all as scpecified and directed.

M&L Pressed steel frames 125 x 60 mm size of frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as scpecified and directed.

M&L Providing, cement concrete type B0 1:2:4 (12.5 mm graded aggreate) in filling of pressed steel frame , coping, fixing of hold fast etc similar work, complete all as scpecified and directed.

S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples over steel windows and gauzed door.

S&F 3mm thick plain sheet glass ordinary quality & glazing with oil putty n.exc 0.50 Sqm in each pane, complete all as scpecified and directed.

S&F Aluminium alloy, anodised, sliding door bolt of length 250mm with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.

M&L 15mm thick screed bed or bedding layer of mortar in CM (1:4) for lying floor finishes and surface fair and even, complete all as scpecified and directed.

M&L for RCC (1:2:4) type B-1using 20 mm graded stone aggregate as in slab, beam, column, chajjas, shelves/tank staging etc, complete all as scpecified and directed.

Use & waste frame work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers,lintels, cantilevers, shelves including supports,overhangs,etc. also splays between floors and beams, etc.as in shelves, complete all as scpecified and directed.

S&F, 15mm bore galvanized steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors, complete all as scpecified and directed.

S&F 20mm bore galvanized steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors.

S&F PVC Ball valves, high pressure, with polythene float & steel rod & fly nut complete, screwed for iron pipe or brass ferrule and fixed 20 mm bore pipe.

S&F in repair PVC (SWR) pipes 110 mm single socketed in any length with rubberring joints, laid in trenches or in floors, complete all as scpecified and directed.

All as per item No 148 above but 75mm bore.

S&F in repair PVC (SWR) pipes 110 mm single socketed in any length with rubberring joints fixed to wall, complete all as scpecified and directed.

S&F in repair PVC bends any radius 110 mm dia.

All as per item No 151 above but 75mm bore.

S & F in repair 110mm PVC (SWR), junction single, (Single T) equal or unequal

S&F in repair 75mm PVC (SWR), junction single, (Single T) equal or unequal, complete all as scpecified and directed.

S&F in repair 110mm PVC (SWR) vent cowl, complete all as scpecified and directed.

S&F in repair vitreous china squating pan 'ORRISA' pattern, size 580X450mm white with integral foot rest complete including connection to trap and to antisyphonage pipe etc complete including making good to floor, complete all as scpecified and directed.

S&F, in repair 10ltr capacity PVC low level flushing cistern, white inlet ball valve, float and handle and connection to pipe including bracket, complete all as scpecified and directed.

S&F in repair, 450mm long, 15mm dia, PVC connection pipe, with brass unions on both ends, complete all as scpecified and directed.

M&L preparation of old surface of wall and applying one coat of oil bound distemper, complete all as scpecified and directed.

M&L for preparing old plastered surfaces of wall and applying two coats of distemper oil emulsion over two coats of wall care putty, complete all as scpecified and directed.

M&L one coat White wash on old plastered or concrete surface including prepration of surface, complete all as scpecified and directed.

M&L applying one coats of synthetic enamel paint incl preparation of old wooden surfaces of any description exc10cm width or girth not otherwise described, complete all as scpecified and directed.

M&L applying two coats of synthetic enamel paint including preparation of newly steel surfaces of any description over 10cm width or girth not otherwise described, complete all as scpecified and directed.

S&F Flat iron / angle iron for hold fast to fixed door/window.

Exavation in trenches n. exc 1.5 mtr wide and n. exc 1.5 Mtr in depth for foundation, etc n exc 10sqm on plan and n exc 1.5m in depth and getting out in hard/dense of soil, complete all as scpecified and directed.

M&L PCC 1:4:8 type D-2 using 40 mm stone aggregate as in foundation filling and mass concrete, complete all as scpecified and directed.

M&L for Plain cement Concrete 1:3:6 (40mm graded aggregate) as in surface channels and drains, complete all as scpecified and directed.

Returning filling in hard/dense soil in trenches after laying pipes construction of manhole etc including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick layer, complete all as scpecified and directed.

Removing surplus soil to a distance n exc 50M and depositing where directed at a level not exc 1.5M above the starting point , complete all as scpecified and directed.

Removing excavated material (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m the starting point, complete all as scpecified and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregare as in foundation filling & mass concrete, complete all as scpecified and directed.

M&L brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4, complete all as scpecified and directed.

M&L 15mm thick rendering on fair faces of brick work/concrete surface in CM (1:3) surface finished even & smooth without using extra cement, complete all as scpecified and directed.

All as per item No 173 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.

M&L for Plain Cement Concrete Cast-In-Situ Type B1, 1:2:4 (using 20 mm graded aggregateas in lintels upto 1.5m clear span, cills, copings, water troughs and the like weathering, slightly rounded or chamfered angles and throatings, complete all as scpecified and directed.

M&L for Re-Inforced Cement Concrete Type B1, 1:2:4 (using 20 mm graded aggregate) set in cement mortar 1:4 as in landings, cover slabs ( for man holes etc.) and similar articles with plain faces, complete all as scpecified and directed.

M&L extra for for forming fair finishing to drain or channel, 30 cm inner girth in cement concrete, with using extra cement, including forms, moulds, mitred/stopped ends etc, complete all as scpecified and directed.

All as per item No 177 above but add or deduct for each 25 mm girth or part there or over or under 30 cm.

M&L for Plain Cement Concrete Type 1:3:6 type C-2 as in Concrete bed to 150mm dia drain pipe including packing under, and haunching against the side or pipes after they are laid and tested in, complete all as scpecified and directed.

M&L re-inforced Concrete Pipes, Class NP2 laid and jointed complete in collars, complete all as scpecified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering ,cutting out existing benching for and forming branch channels ( 1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required for internal dia pipe 150mm, complete all as scpecified and directed.

Cutting into existing manholes for removing , existing branch drain, making good to walling and rendering , cutting out branch channel , making good benchings. in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required for internal dia pipe 150mm, complete all as scpecified and directed.

Taking down copper /aluminium point wiring (light, fan, socket or power) complete with screws gutties including fixtures and fittings such as switches, ceiling rose, pendants, regulators, socket, light fittings, etc removing materials to store for taking credit and making good disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces, complete all as specified and directed.

M&L for point wiring (concealed) with 1.5 Sqmm PVC insulated FR unseathed multi stranded copper conductor cable 1100 volts confirming to IS-694-1990 and one run continious earth wire with 1.5 Sqmm stranded core PVC insulated unsheathed FR copper conductor confirming to IS-6941990 in PVC Conduit concealed type incl PVC conduit/fitting etc, switch, sockets fixed to modular MS boxes and metal colour plate and all as specified and directed :-

One light point controlled by one switch

One fan/exaust point controlled by one switch

One light point controlled by two 2 way switches, with cables 1.5 sqmm size

One 3 pin socket outlet 5 Amps, on the same board with other switches

One socket 3 pin outlet 5 amp on independent board

One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cable 1.5 sq mm size

All as per item No 184 above but with copper conductor cable for one 3 pin socket outlet 15 amp independent board with cable 2.5 sq mm including one run of 2.5 sq mm copper conductor as earth contnuity wire, complete all as scpecified and directed.

S&F Switch piano, flush type single pole, one way 5 Amp 1 module, complete all as scpecified and directed.

S&F Modular switch 2 way 6A, 1 module, complete all as scpecified and directed.

S&F modular white cover plate with frame,2 module. Make : Anckor/Legrand/Havells (Crabtree)

S&F modular white cover plate with frame,3 module. Make : Anckor/Legrand/Havells (Crabtree)

S&F modular white cover plate with frame,4 module. Make : Anckor/Legrand/Havells (Crabtree)

S & F modular white cover plate with frame,6 module. Make : Anckor/Legrand/Havells (Crabtree)

S&F modular white cover plate with frame,12 module. Make : Anckor/Legrand/Havells (Crabtree)

S&F ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body, ac, 230 volts, complete all as scpecified and directed.

S&F in replacement of flexible wire twin core copper conductor of size 23/ 0.0076 for fans and fluorescent tube light, pendant fittings connection upto 1.50 mtr length, complete all as scpecified and directed.

S&F in replacement modular type electronic fan regulator, complete all as scpecified and directed.

S&F Socket outlet 2 in 1, 3 pin, 5A multipurpose, flush type, complete all as scpecified and directed.

S&F Switch socket outlet 3 pin 5 amp' flush type multipurpose, flush type, complete all as scpecified and directed.

S&F Switch socket outlet 3 pin, 15 amp, flush type flush type universal, complete all as scpecified and directed.

S&F Bell push 6A 1 module, flush type, complete all as scpecified and directed.

S&F bell multi music type, AC, 230 V, single pole, complete all as scpecified and directed.

M&L in replacement of lamp holder, alongwith 12 watt inverter bulb with 4 hours backup lightfacility PVC/ Polycarbonate type with back plate suitable for batten fitting, complete all as scpecified and directed.

S&F LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as scpecified and directed.

Taking down and Refixing only ceiling fan and connecting up with round flexible copper conductor Flame retardant PVC insulated and sheathed 3 core multi stranded of size 0.50 Sq mm from ceiling rose to connector of C / Fan, complete all as scpecified and directed. (Note : 1. Cost of Flame retardant PVC insulated unsheathed multi stranded round flexible copper conductor 1100 V grade 3 Core 0.5 Sqmm from ceiling rose to connector of C / Fan is deemed to be included in the rate quoted.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as scpecified and directed.

Taking down sub main wiring of any size from the ceiling, walls etc and incl making good to the disturbed surfaces of wall/ ceiling to match with the existing surface, complete all as scpecified and directed.

S&F in replacement sub main wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper 1100 V grade conductor, single core cable in surface/ recessed as required drawn in and including PVC conduit with all accessories such as saddles, screws etc, complete all as scpecified and directed :- (a) 2 x 4.0 sq. mm + 1 x 2.5 sq. mm earth wire

S&F in replacement sheet metal enclosure for DB's for using MCB, MCB DB, single pole and neutral 8 ways double door with 200 amps rated bus bar 240 volts and all accessories, complete all as scpecified and directed.

S&F in replacement of MCB single pole and neutral 32-63 amps, 240 Volts.

S&F in replacement of MCB 6 to 32 amps single pole 240 Volts.

M&L for Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB, complete all as scpecified and directed.

S&F in replacement of of XLPE insulated heavy duty electric cables with aluminium conductor, 1100 volt grade, cross sectional area 16 Sq mm 4 core, complete all as scpecified and directed.

Excavation in trenches, not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth in loose / soft soil and getting out for laying of LT UG cable including levelling bottom surface, complete all as scpecified and directed.

M&L for sand cushioning in trenches including watering and consolidation as in cable protection, complete all as specified all as per SSR Part-I.

M&L for sub class 'B' bricks, laid flat in trenches with width equal to width of the brick for the protection of under ground cable complete all as specified and as specified in SSR Part-I.

Returning and filling including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick, complete all as scpecified and directed.

Removing of excavated material to a distance not exceeding 50 Mtrs and depositing where directed at a level not exceeding 1.5 Mtr above the starting point, complete all as scpecified and directed.

M&L for GI tube, `light grade',, 50mm with all fitting; laid in trenches/with pole, complete all as scpecified and directed.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm with cutting of wall and masonry work.

M&L for earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level,connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, checknuts and washers of galvanised iron or steel including earth work in any type of soil, charcoal, salt filled around the earth plate as shown in electrical plate No. 5 of SSR part I 1991, 20 mm dia watering medium grade 1.50 mtr long GI protection pipe light grade 15 mm dia from earth pit to main board including earth pit in PCC (1:3:6) type C-1 and 40 mm thick RCC cover reinforced with 8 mm dia MS bars @ 100 c/c both ways, funnel etc & testing, complete all as scpecified and directed.

Supply and install, testing and commissioning 3 phase 4 wire, 50 Hz, 433 Volt ,Indoor door type LT Main distribution panel board 3'x2' double door with front opening made of 1.60 mm MS sheet powder coated fixing on wall complete. With arrangement of three phase cable incomming lower side, fixing of MCCB 63 Amp-01 Nos as incomming , fixing of MCB 6-32 Amp DP-04 Nos and fixing of electronic energy Meter with LCD display-04 Nos including connection with suitable size of cable, complete all as scpecified and directed.

GIAN ENGINEERS