Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.9 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹22.3 L+₹2.1 L (10.6%)Rejected-Finance | L2 | Rejected-Finance L2 |
Tender Value
₹21.2 L
EMD Value
₹42,400
Closing Date
9 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer
Garrison Engineer Chandimandir panchkula Haryana 134107
GE/CHM-74/2023-2024 ALTN TO ONE JCO/OR WASHROOM FOR ALL SIX FLOORS OF BLDG P-163 OF WC CHANDIMANDIR
2023_MES_622901_1
GE/CHM-74/2023-2024
Open Tender
Civil Works
Item Rate
180 days
Chandimandir
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer
₹42,400
Yes
18 Dec 2023
12 Oct 2023
11 Nov 2023
12 Oct 2023
9 Nov 2023
26 Oct 2023
Amount
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish of the premisses, complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors laid, bedded and pointed in any mortar including disposal of demolished material n.exc 1.5 km complete all as specified and directed.
Glazed ceramic coloured tiles in vertical surface 300mm x 600mm x 7mm thick, joint free, first quality, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 10mm thick rendering in cement mortar 1:4 , complete all as specified and directed.
Non skid, joint free ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.18 Square Metre but not exceeding 0.38 Square Metre, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 , complete all as specified and directed.
Granite stone slabs, 16 to 18mm thick, width and length as per site requirement, best quality machine cut and polished to be fixed in floors,cooking plateform, tread, raiser of steps and vertical surfaces etc and jointed with gray cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing, cutting / rounding of edges and corners where required with and including 15 mm thick screed bed in cement mortar 1:4, Complete all as specified and directed.
16-18mm thick granite work (of any type) work (table rubbed and polished) in wall by cutting groove and set in cement mortar 1:4 / suitable adhesive including pointing in white cement 1:2 using marble dust with admixture of pigment to match with granite shade with rounding to edges exposed to view complete all as specified and directed.
Providing edge moulding to marble stone 16-18mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete.
Demolition of reinforced cement concrete in roofs, floors (other than ground floor), beams, staircase, landing, chajjas, shelves and similar suspended work, including cutting of reinforcement to facilitate demolition and removal of debris , complete all as specified and directed.
Reinforced cement concrete, 1:2:4 (nominal mix, type B-0, using 12.5mm graded crushed stone aggregate) as in slabs supported on walls, beams etc, shelves and the like complete, all as specified and directed .
Form work to soffits of suspended slabs such as roof slabs rough finished surface of concrete flat not exc 200mm thick complete all as specified and directed.
High strength deformed bar TMT bars for reinforcement, 10mm dia & over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed by Engineer-in-Charge.
Brick work with sub class ‘B’ bricks old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:4, Including dismantling old brick work complete all as specified & directed.
Cutting holes in to brick wall built in cement mortar for inserting hold fast etc the embedded portion exceeding half brick but n.exc full brick and making good to the disturbed portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 using 20mm stone aggregate complete all as specified and directed.
Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. at the places out side the premises complete all as specified and directed.
Rendering 15mm thick plaster in cement mortar 1:4 on brick or concrete surface of wall with mixing of WPC, finished even and fair without using extra cement complete all as specified and directed by Engineer-in-charge. Note :- WPC will be measured & paid separately as supply only).
10mm thick rendering in Cement and Sand mortar 1:6 over concrete /brick surfaces finished even and smooth without using extra cement, complete all as specified & directed.
5mm thick rendering in Cement and Sand mortar 1:3 on ceiling, chajja surfaces (concrete surfaces)finished fair and even without using extra cement, as in ceiling, chajjas, facias, at any position, complete all as specified & directed.
Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer, complete all as specified & directed.
Preparation of old decorated wall surfaces and applying two coats of oil bound distemper complete all as specified and directed.
Preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed
one coat of oil bound on ceiling surfaces including preparation of old decorated surfaces complete all as specified and directed
Preparation of new plastered surfaces of walls, applying two coats of cement base paint over a coat of primer, complete all as specified and directed.
Preparation of old surfaces of walls and applying two coats of cement base paint, complete all as specified and directed
Taking down chowkhats or frame n.exc 1.5 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed.
Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed.
Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each, and removal from site complete all as specified & directed.
Pressed steel frames 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, including fill of PCC 1:3:6 complete all as specified and directed.
Flush shutters 35mm thick factory made solid core construction with block board core and ply wood face panels, commercials type on both sides,including a shop coat of pink primer, complete all as specified & directed.
Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples , complete all as specified and directed.
Two coats of synthetic enameled paint on steel and iron surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified & directed.
Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Preparation of old steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
One coat of synthetic enameled paint on old wooden surfaces of any description ,including preparation of old surfaces , complete all as specified & directed.
Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 75 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type moulded door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)
100 mm size butt hinges medium weight cold rolled mild steel complete, all as specified and directed.
200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed, all as specified and directed.
150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed, all as specified and directed.
250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed,complete all as specified and directed.
Aluminium alloy handles, cast type, 150mm long , all as specified.
PVC (SWR) pipe, 75mm bore, single socketed in any length with rubber ring joints, fixed to walls or laid in floor, fixed as in repair complete all as specified and directed.
PVC (SWR) pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls or laid in floor, fixed as in repair complete all as specified and directed.
75 mm bore PVC (SWR) bends of any radius, fixed as in repair complete all as specified and directed.
110 mm bore PVC (SWR) bends of any radius, fixed as in repair complete all as specified and directed.
PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm bore, including jointing to waste pipe set in cement concrete type B-1(1:2:4) , fixed as in repair complete all as specified.
PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.
Vitreous china squatting pan, “Orissa” pattern size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, set with cement concrete, fixed as in repair, complete all as specified & directed.
Vitreous china, wash down water closet pan, Pedestal pattern coloured with ‘P’ or ‘S’ trap in and, including seat cover, complete set, fixed in repair complete all as specified and directed.
PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend, set with concrete and making good to floor, fixed in repair complete all as specified & directed.
Vitreous china table top wash hand basin of size 530x420x140mm mounted on granite stone slab platform by cutting for coupling etc, fixed as in repair complete all as specified and directed. Make : Jaquar cat part JDS-WHM-25907N or equivalent in Kohler/ Cera as approved by Engineer-in-charge
Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) fixed as in repair, complete all as specified & directed.
Brass chromium plated bottle trap for wash basin with inlet and outlet screwed for pipe or connections including necessary packing, union and cap, having water seal of 25mm, suitable for 32mm bore pipe, fixed as in repair complete all as specified and directed.
15mm bore self closing (push cock) taps of cast copper alloy, chromium plated screwed for iron pipe and fixed, fixed as in repair complete all as specified and directed. MAKE : PRAYAG Cat Part No BSC 10, Jaquar Cat Part No PRS-077, CERA Cat Part No F9020201
Urinal spreader cast copper alloy chromium plated, screwed down, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed.
CP brass waste coupling / waste fitting with long shank, half thread, 32mm bore for kitchen sinks,wash hand basin, fixed as in repair complete all as specified and directed.
Single lever extended basin mixer, cast copper alloy, cast copper alloy chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed.
Bib taps brass, fancy type, long body, with wall flange, standard cast copper alloy chromium plated, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed in repair complete all as specified and directed.
127mm dia cast copper alloy chromium plated grating, fixed as in repair complete all as specified and directed.
Brass chromium plated, tubular towel rail 20 mm dia. ‘D’ type, 60 cm long between flanges including brackets, fixed as in repair complete all as specified and directed.
Brass chromium plated Towel ring with and including chromium plated brass screws with PVC rawl plugs, fixed as in repair complete all as specified and directed.
Chromium plated Peg hook set of 6 and fixed with brass screws with PVC rawl plugs, complete all as specified and directed.
Angular stop cock, fancy type, cast copper alloy chromium plated, screwed down, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.
Chromium plated hand jet (health faucet) for 15mm bore pipe with 100cm long flexible tube, including fixing of hook on wall, fixed in repairs, all as specified.
Toilet paper holder, cast copper alloy, chromium plated, fixed in position in repairs, complete all as specified and directed. NOTE for serial item No 52 to 64 : The make of the CP fittings shall be Jaquar or equivalent as approved by the Engineer-in-charge amongst the approved list of make mentioned in the tender documents.
15mm dia PVC connection with PTMT nut, of length 450mm, fixed as in repairs, complete all as specified and directed.
32mm dia PVC waste pipe with PTMT nut, fixed as in repair complete all as specified and directed.
Demolition of un-reinforced cement concrete in ground floors and pavings exceeding 15 cm thickness. (Below or above ground level) complete all as specified and directed. Note : Work carried out upt 8th storey Bldg
15mm dia GI tubing medium grade with all fittings , fixed into walls, ceiling or laid under floors and taking down existing tubing, complete all as specified and directed.
20mm dia GI tubing medium grade with all fittings , fixed into walls, ceiling or laid under floors and taking down existing tubing, complete all as specified and directed.
Plain cement concrete 1:7:12 type F-2 using 40mm graded brick aggregate as in sunken floor filling and mass concrete, complete all as specified & directed.
Water proofing treatment to sunken portion and adjoining walls of kitchen, WC, Bath & Toilet, etc, as follows, complete all as specified & directed :- (a) 15 mm thick plaster in cement mortar (1:3) mixed with WP compound as per manufacturer's instructions shall be provided on sunken portion after roughening of surfaces. (b) Apply cement slurry to the surface @ 0.488 kg /Sqm of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.253 kg/Sqm and the surface will be allowed to air cure for 4 hours. (c) Apply another layer of cement slurry @ 0.242 kg/Sq. m of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.126 Kg/Sq. m and the surface will be allowed to air cure for 4 hours. (d) Pond curing of sunken portion for minimum of 48 hours. (e) Paste one layer of 3mm thick APP membrance with bitumen by torch application to the the treated sunkensurface. (f) Joints/ traps /WC /soil pipes shall be properly sealed with approved sealing compound.
Plain cement concrete typeB-1, 1:2:4 using 20mm graded crushed stone aggregate as in levelling of floor finished fair and even complete all as specified and directed.
1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) triple layered hoisted and fixed in position, including PTMT tank nipple, float valve of 20 mm bore etc, fixed as in repairs complete all as specified and directed.
Supply only Integral waterproofing compound, all as specified.
Power coated aluminum sections as in frames/ shutters of doors/ windows/ ventilators including joining cleats, glazing clips, rubber neoprene beadings, handles, hinges screws etc, complete all as specified and directed Note : (i) Thickness of powder coating shall not be less than 50 micron (ii) weight of the aluminium section and beading shall be measured and paid. (iii) Aluminium doors /windows /ventilators to be fixed to jambs with cadmium plate screw. (iv) The rate shall be inclusive of neoprene beadings, handles, hinges, screws etc, weight of fitting / fixtures will be measured for arriving the weight of aluminium section. (v) Glass panes & panel shall be measured & paid separately under respective items as supply only. Note : Design and size/ section of frame / shutter shall be approved from Engr-in-Charge as existing at site and all as per Drawing before fabrication and bulk order to the manufacturer.
Supply only 5.0mm thick figured glass fixed to aluminum frame work with standard anodized aluminum snap beading, rubber packing, aluminum screws etc in panels exc 0.5 Square metre in each pane, complete all as specified & directed.
Supply only 5.0mm thick figured glass fixed to aluminum frame work with standard anodized aluminum snap beading, rubber packing, aluminum screws etc in panels n.exc 0.5 Square metre in each pane, complete all as specified & directed.
Dismantling of wall lining and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and frame work complete all as specified & directed by Engineer-in-charge.
Solid PVC 5mm thick wood grain printed PVC sheet as in wall / ceiling and fixing at site on PVC frame as per specifications complete all as specified and directed.
PVC sheet fillet 35mm wide, 5mm thick for wall paneling, complete all as specified and directed.
Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm, fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre with hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long, complete all as specified and directed
Taking down carefully aluminum/copper point wiring on & including hard wood battens, surface conduit and board/blocks etc or through conduits for light , socket or power point ,fan point complete incl fitting such as switches ,sockets, ceiling rose , holder socket, light fitting, regulators and making good disturbed surfaces of wall, floor , ceiling etc and removing materials (other than those for which credit has been given by the contractor) to the MES stores yard for keeping in safe custody complete all as specified and directed.
Point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase & neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in and including new concealed PVC conduit terminated on and including new steel sunken boxes 1.2mm thickness covered with provision of 3mm thick plastic laminated sheet, comprising of One light /bell/buzzer point controlled by one switch or one fan point controlled by one switch &fan regulator, complete all as specified and directed. Note :Unit rate is inclusive of cutting chases in wall /foor/PCC and making good the disturbed surfaces to match the original finishes surface and nothing extra shall be paid on this account.
Switch piano, flush type, 6 amps, 230 volts, single pole, one way (ISI marked) complete all as directed by Engineer-in-charge
Ceiling rose, PVC or polycarbonate of size 65mmx50mm three terminals (ISI marked) all as specified and directed by Engineer-in-charge.
Disconnecting the power supply and taking down carefully by unscrewing from boards fittings and fixtures such as DBs, Junction Box, Panels of any size complete with all MCCB's ,MCB's etc and removing from site, Complete all as specified and directed .
MCB DB, IP 43 protection, powder coated double door with locking arrangement suitable for surface and flush mounting, 8 way SPN with 200 Amps busbar 240V completed all as specified and directed.
MCB, SPN, 240 volt, 40 to 63Amps, 10 KA , 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed
MCB ,SP , 240 volt, 6Amps to 32Amps, 10 KA , 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed
LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose fixed as in repair complete all as specified and directed.
LED lights fitting 1x 10W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose fixed as in repair complete all as specified and directed.
Taking down carefully old copper or aluminium sub main wiring of any Nos of wiring and size with earth wire on wooden batten/ surface conduit/ casing- capping/ PVC conduit complete with its all accessories and making good disturbed surfaces of wall , floors etc complete all as specified and directed.
Sub main wiring with two single core FRLSH PVC insulated and unsheathed cable with copper conductor of size 4 Sqmm (nominal area), 1100 Volt grade(with approved colour coding as per IS) with and including continuous earth wire of size 4 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade , and connected to main board drawing through PVC concealed conduit 25mm size(minimum size), cutting chases in walls for PVC concealed conduit and making good the disturbed surfaces by provding by wall putty/POP after mason work and finshing to match the original surfaces and nothing extra shall be paid on this account all as specified and directed. Note : (i) For the purpose of measurement, 2 single core of 4 sqmm and one single core of 04 sqmm cable as earth wire along with PVC conduit shall be considered as 1 running metre. (ii) colour code shall be Red for phase, Black for neutral and green for earth
Standard Const. Co.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .