Shirdi Industrial Area Providing erecting testing and commissioning pumping machinery at Raw water and Pure water works and power supply to WTP and BT in Shirdi Industrial area

Providing, installing, commissioning and testing of VERTICAL TURBINE, self water lubricated above floor type pump capable of discharging pure water at the rate of 150 Cum/ Hr. at the duty point head of 15.03 meter and operating within the head range of 20.00 to 10.00 meter including stainless steel basket strainer , bowl assembly , column assembly, discharge head , base plate of suitable size , connecting stool and sole plate of 16 mm thick etc. complete. The column pipes shall be manufactured from ERW pipes of 8 mm thick and each of 1.5 m length provided with anticorrosive paint and all line shafts and impellers shafts of stainless steel AISI 410 and impellers of aluminum bronze, including all consumable materials, accurate digital type Pressure gauge to read entire range of pressure complete with necessary tubing The complete pump assembly from discharge head to strainer shall have to be connected with nuts and bolts of stainless steel AISI 304/316. The pump should be operating at 1460 RPM speed and shall be complete as per the detailed specifications. AND Supplying, erecting, commissioning and testing at site flange mounted vertical Solid shaft (VSS) motor with “F” class insulation and operated on 415 volts, 50 Hz, 3 phase, AC supply,1460 rpm of 15 HP , squirrel cage TEFC induction motor as and per IS:325 complete with non-reversible ratchet arrangement and giving satisfactory trials & training to staff etc complete

Providing, installing, commissioning and testing of VERTICAL TURBINE, self water lubricated above floor type pump capable of discharging raw water at the rate of 150 Cum/ Hr. at the duty point head of 9.80 meter and operating within the head range of 14.00 to 06.00 meter including stainless steel basket strainer, bowl assembly, column assembly, discharge head , base plate of suitable size , connecting stool and sole plate of 16 mm thick etc. complete. The column pipes shall be manufactured from ERW pipes of 8 mm thick and each of 1.5 m length provided with anticorrosive paint and all line shafts and impellers shafts of stainless steel AISI 410 and impellers of aluminum bronze, including all consumable materials, accurate digital type Pressure gauge to read entire range of pressure complete with necessary tubing The complete pump assembly from discharge head to strainer shall have to be connected with nuts and bolts of stainless steel AISI 304/316. The pump should be operating at 1460 RPM speed and shall be complete as per the detailed specifications. AND Supplying, erecting, commissioning and testing at site flange mounted vertical solid shaft (VSS) motor with “F” class insulation and operated on 415 volts, 50 Hz, 3 phase, AC supply, 1460 rpm of 10 HP , squirrel cage TEFC induction motor as and per IS:325 complete with non-reversible ratchet arrangement and giving satisfactory trials & training to staff etc complete

Providing, erecting, commissioning of LT Set switchgear panel, cubical type, MS sheet fabricated from 14 gauge CRCA sheet including all accessories, switchgear, Copper busbar, foundation channel this item includes Designing, providing, erecting, testing & commissioning of FCMA starter without any active electronic component, moving parts & totally harmonics free, Star Delta starter lifted with all accessories including providing & applying painting to frame with international orange colour & two doors & covers Siemens gray etc. The starter shall be suitable for 15 HP induction motor operating at 415 / 440 Volts, 3 phase 50 Hz AC supply. The starter shall be Star Delta Connected The details list of material required for L.T. Starter panel required for L.T. Starter panel are mentioned in itemwise specification consist of material quantity and make including Base Frame and fabrication of appropriate size. The main components of panel are as below. 1) 200 A, 4 pole Microprocessor based MCCB - 1 Nos. for Incomer 2) 200 A, 4 pole Changeover Switch - 1 Nos. 3) Starter Feeders with 100 A MCCB and Star Delta Starter for 15 HP motor. - 2 Nos. 4) Auxillary Feeder with separate compartment -- 63 A X 2 nos. ; 32 A X 8 Nos.; 5) Capacitor Bank 5 KVAR 2 No., 3 Kvar 2 No., 2 Kvar 5 No. 1 Kvar 5 No.

Providing, erecting, commissioning of LT Set switchgear panel, cubical type, MS sheet fabricated from 14 gauge CRCA sheet including all accessories, switchgear, Copper busbar, foundation channel this item includes Designing, providing, erecting, testing & commissioning of FCMA starter without any active electronic component, moving parts & totally harmonics free, Star Delta starter lifted with all accessories including providing & applying painting to frame with international orange colour & two doors & covers Siemens gray etc. The starter shall be suitable for 10 HP induction motor operating at 415 / 440 Volts, 3 phase 50 Hz AC supply. The starter shall be Star Delta Connected The details list of material required for L.T. Starter panel required for L.T. Starter panel are mentioned in itemwise specification consist of material quantity and make including Base Frame and fabrication of appropriate size.. The main components of panel are as below. 1) 200 A, 4 pole Microprocessor based MCCB - 1 Nos. for Incomer 2) 200 A, 4 pole Changeover Switch - 1 Nos. 3) Starter Feeders with 100 A MCCB and Star Delta Starter for 10 HP motor. - 2 Nos. 4) Auxillary Feeder with separate compartment -- 63 A X 3 nos. ; 32 A X 8 Nos.; 5) Capacitor Bank 5 KVAR 2 No., 3 Kvar 2 No., 2 Kvar 5 No. 1 Kvar 5 No..

Providing, erecting and commissioning M.S. Dismantling joint as per requirement and Department's approved drawing and specifications, including machining and rubber rings and suitable for 16 kg/cm2 working pressure with required flanges of suitable size with nut bolts etc complete. The joint should have through long bolts so that during normal working pressure there should be no sliding movement of sliding flanges. L.O.F. ( length over flange ) should not be less than 75% of dia. PW 6-1) 100 mm dia Joint

Supplying erecting testing and commissioning 100 mm dia DI/D/F Slanted seat swing rubber flap check valve (Non Return Valve) similar to RETO STOP Non return Valve having body of ductile cast iron GGG-40 and disc of ductile cast iron GGG-50 with fully encapsulated with EPDM Rubber (Potable water certified). Slanted seat is fixed for easy opening and quick closing. Full bore opening to achieve high discharges & reduced pressure drops. Check valve Electrostatic epoxy power /liquid coating (EP-P) inside and outside color blue RAL 5005 with minimum coating thickness of 250 microns. The EPDM rubber & Epoxy coating should be potable water certified. Face to face dimensions as per EN558-1, series 48 and flange connections as per EN 1092-2/IS 1538 including all labour , material complete. PN rating 1.0 Material of Construction :- Body & Cover :- Ductile iron to EN-JS 1030 (GGG-50) Disc :- Ductile iron to EN-JS 1030 (GGG-40, fully coated with EPDM rubber (portable water certified) Hinge Pin/Shaft :- Stainless Steel [ AISI 431] Cover Screws Nuts :- Stainless Steel [ AISI 304] Plug :- Brass Surface Protection :- Epoxy powder coating, min.-250 microns, color: RAL 5005 signal blue (potable water certified)

Supplying erecting testing and commissioning 100 mm dia DI D/F non-rising spindle soft seated glandless Gate Valves with body and bonnet of Ductile cast iron of grade GGG-50, wedge with fully encapsulated EPDM rubber (approved for drinking water ) and seals of NBR. The valves should be with replaceable stem nut and replaceable sliding shoes. Valve stems shall be of single piece thread rolled type. Valve shall have 3 “O” rings of NBR for stem sealing. Gate valve shall be compatible for buried application without valve chamber. Face-to- face dimensions as per BS 5163-89/IS 14846 – PD/EN 558 F4 and flange connections as per EN1092-2/IS 1538, Maximum valve operating torque should be at least 40% less than the torque as stated in the standard EN 1074. Electrostatic epoxy power / liquid coating (EP-P) inside and outside color blue RSL 5005 with minimum coating thickness of 250 microns. The EPDM rubber & Epoxy coating should be potable water certified. Material of construction :- Body, Bonnet :- Ductile Iron GGG40 (EN-JS-1030) Wedge, (Fully rubber encapsulated):- Ductile Iron GGG 40(EN-JS-1030) encapsulated with EPDM rubber- Portable water certified. Spindle / Stem: - SS: AISI 420 Stem Nut:- Brass Bonnet Gasket: - EPDM rubber potable water certified Internal fasteners: - Stainless Steel SS304 Stem Sealing :- Toroidal NBR sealing rings (Min 03 ‘O’ Rings) Coating: - Inside & Outside epoxy powder coated; DFT minimum 250 micron, shade RAL, 5005 (Signal Blue) potable water certified. excluding GST) PN 1.0 rating a) 100 mm dia

Supplying erecting testing and commissioning DI D/F non-rising spindle soft seated glandless Gate Valves and single chamber, double orifice DI Air valve with Triple function (Venting, admitting and venting during operation), in one piece construction (Both Large and small orifice housed in single housing itself), with capacity to handle air up to sonic velocity (300 m/s), with flange dimension acc. To EN 1092-2 /IS 1538. Body and cover bolts of austenitic GGG40. All internal parts such as float, shell etc & all cover bolts of austenitic alloy, steel and gaskets and seals of EPDM approved for potable water & avoid anti-bacterial growth which is mandatory for drinking water, with Electrostatic epoxy powder coating (EP-P) inside and outside color blue RAL 5005 with minimum coating thickness of 250 micron. Tamper proof design to avoid any external tampering leading to better functioning over longer periods of time and design to avoid any external access to safeguard the system from theft of water through introduction of foreign objects. The Air vlave should be able to seal to as low as 0.3 bar pressure which should be demonstrated during inspection. Material of Construction :- Body:- Ductile iron to EN-JS 1030 (GGG-40) Bonnet & Cover :- Ductile iron to EN-JS 1030 (GGG-40) Float :- Stainless Steel AISI 316 Ti Shell Body :- Stainless Steel AISI 321 Shut off Device & Ring :- Stainless Steel AISI 321 Gasket & Seal :- EPDM Rubber (Potable water certified) Lead Screws :- Stainless Steel AISI 304 Cylindrical Screw :- Stainless Steel AISI 304 Surface Protection :- Electrostatic epoxy powder coating, min.-250 microns, thickness, colour RAL 5005 Blue (portable water certified) a) 80 mm dia

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.