GE 861 EWS-15(T)/2025-26

Amount

Demolition of cement concrete (unreinforced) in ground floors & pavings n.exc 15 cm thickness (below or above ground level), complete all as specified and directed.

Demolition of cement reinforced concrete (reinforcement cut as required to facilitate demolition) in ground floors & pavings n.exc 15 cm thickness (below or above ground level), complete all as specified and directed.

Demolition of brick work or stone / boulder masonry, built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

Taking down cement plaster on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons etc., complete all as specified and directed.

M&L for Factory made machine pressed precast concrete coloured interlocking paver block with grey cement and pigment, any shape, size and design as approved by Engineer-in-charge conforming to IS 15658-2006 of 60 mm thickness, M-35 grade, complete all as specified and directed.

M&L for Factory made machine pressed precast concrete coloured interlocking paver block with grey cement and pigment, any shape, size and design as approved by Engineer-in-charge conforming to IS 15658-2006 of 80 mm thickness, M-40 grade, complete all as specified and directed.

M&L for 40mm thick sand cushioning for laying bed for interlocking paver blocks including watering and consolidation, complete all as specified and as directed.

M&L for Chequered coloured cement concrete tiles of size 300mm x 300mm x 18-20mm thick (glossy finish), with grey cement and pigment, set, jointed and pointed in neat cement slurry, laid in floors, over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

M&L for 50 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base under flooring of path/hardstanding etc., complete all as specified and directed.

M&L for 75 mm thick PCC 1:2:4, type B-1 (using 20mm graded stone aggregate) as in flooring, finished even and smooth without using extra cement complete all as specified and directed.

M&L for Plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork, complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in surface channel and drains including forms/moulds etc., complete all as specified and directed.

M&L for Precast cement concrete type 1: 2: 4, type-B1 (using 20 mm graded crushed stone aggregate) as in landings, cover slabs, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, set and jointed in CM 1:4, complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks straight or curved on plan, exceeding 6m mean radius with old size bricks, built in cement mortar 1:6, complete all as specified and as directed.

All as per the description of item No. 16 here-in- before but except bricks, complete all as specified and as directed.

M&L for Walling of random rubble masonry with best quality stone, uncoursed, well bonded, bedded and solidly hearted and built in cement mortar 1:6, complete all as specified and as directed.

All as per the description of item No 18 here-in- before but except stones, complete all as specified and as directed.

M&L for 20mm thick rendering on stone masonry walls in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished the surface even and smooth without using extra cement, complete all as specified and directed NOTE: Work to be carried upto 10m height. . complete all as specified & directed

M&L for Preparation of new plastered or unplastered surfaces of wall and applying two coats of cement base paint over a coat of alkali-resistant priming coat, complete all as specified and directed.

M&L for mild steel work as in hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed. to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified & directed

M&L for Mild Steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for Preparation of new steel surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

M&L for Preparation of old surfaces of walls, plastered or unplastered including brooming down or steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on wall, complete all as specified and directed.

All as per item No 26 above but applying one coat of cement based paint on wall complete all specified and directed.

M&L for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamelled paint complete all specified and directed.

15mm thick cement plaster in patches (in repairs), n exc 3.00 sqm each patch in cement mortar 1:4 on bricks or concrete surface and finished even and smooth without using extra cement, complete all as specified and directed.

M&L for Preparation of old surfaces of walls, plastered or unplastered including brooming down or steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts and treating oil and greasy spots and applying two coat of weather proof exterior acrylic emulsion in camouflage pattern on wall complete all as specified and directed. Note:- work to be carried out up to 6 to 7 Mtr height.

JANDOO AND CO (BID ID -3332297)

M/S Manzoor Constructions (BID ID -3331479)

Asian Marketing Co (BID ID -3338383)

M/S ABDUL KARIM RATHER (BID ID -3330292)