SPECIAL REPAIR TO BLDG NO P-19 (08 QTRS) OF GOVT LIVING ACCN AT TAWI COMPLEX UNDER GE SATWARI

Amount

B&R PORTION:- Complete removal of the existing roof treatment including grubbing up of tree roots and preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water all loose dirt/dust and applying the following Roof Treatment complete all as directed :- (a) Applying 1st course of 15mm thick screed bed in cement mortar 1:4 on concrete surfaces mixed with liquid water proofing compound Pedilite LW plus @ 200 ml per 50 Kg of cement finished surface even and fair for laying of water proofing membrane complete all as specified and directed. (Note : WPC will measured and paid separately as supply only). (b) Applying 2nd course of bituminous primer conforming to IS -3384 @ 0.4 Kg/Sqm cover the surface till the surface properly impregnated and insolvent oil primer evoporate completely. (c) Applying 3rd course of APP (Atactic Polypropylene) modified polymeric membrane 3 mm thick weight not less than 3.6 Kg/Sqm with 160 grams/sqm non woven polyester made at centre core reinforced laid with 75 mm side overlap and 100 mm overlap. ......contd to item no-1.01

The membrane has to be laid with LPG torch and overlap sealed and finished neat. All joints and changes in direction should be covered with cement mortar 1:3 mixed with SBR latex @200ml/bag of cement and curved before laying membarance. (d) Applying 4th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to a working temperature of 180° C and applied @ 1.2 Kg/Sqm, complete all as specified and directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and putting APP roof treatment tarfelt sheet in it and shaping horizontal face of groove with cement mortar 1:3, complete all as specified and directed.

Supply only Water proofing compound liquid.

Taking down cement plaster of any description on brick work including raking out joints, hacking for key, scrubbing down with water, etc and removing all the demolished material outside cantt area, complete all as specified and directed.

Roughening surfaces of old concrete floors by picking, sweaping clean and washing down with water to remove dust, etc., complete all as specified.

Glazed ceramic plain coloured / printed tile 300x200x7mm thick on vertical surface as in dado/skirting etc (coloured tile), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles fixed over & including 10 mm thick rendering in CM 1:4, complete all as specified.

Non skid ceramic coloured tiles (300x 300mm) 7 to 8mm thick ( Square or rectangular) area of each tile exeeding 0.06 Sqm but not exceeding 0.11 sqm as in floors set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tiles laid over & including 15 mm thick screed bed in CM 1:6, complete all as specified.

Non skid ceramic coloured tiles (400x 400mm) 7 to 8mm thick ( Square or rectangular) area of each tile exeeding 0.11 Sqm but not exceeding 0.18 sqm as in floors set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tiles laid over & including 15 mm thick screed bed in CM 1:6, complete all as specified.

Non skid ceramic coloured tiles (400x 400mm) 7 to 8mm thick ( Square or rectangular) area of each tile exeeding 0.11 Sqm but not exceeding 0.18 sqm as in skirting set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tiles fixed over & including 10 mm thick rendering in CM 1:4, complete all as specified.

Rendering 15mm thick in CM 1:6 on brick wall surface or concrete surface finished even and smoth without using extra cement upto 4th floor of bldg inluding necessary scafffolding, ladder or any type of T & P required at site and applying two coats distemper oil emulsion over a coat of chalk whiting primer, complete all as specified.

Rendering 5mm thick cement plaster as in ceilings in cement mortar (1:3) finished even and fair without using extra cement, complete all as specified.

Rendering 15 mm thick in CM 1:4 on brick wall surface or concrete surface finished even and smoth without using extra cement upto 4th floor of bldg inl necessary scafffolding, ladder or any type of T & P required at site and applying two coats of cement base paint including priming surface with chalk whiting, complete all as specified.

Two coats white wash on newly plastered / old treated plastered surfaces of wall including preparation of surfaces etc complete all as specified and directed.

Preparation of old plastered surfaces of wall and applying two coats cement base paint, complete all as specified and directed.

Three coats of white wash on ceiling on newly plastered surfaces including preparation of surfaces, complete all as specified.

Description all as periem No-15 above but two coats on old treated plastered surfaces.

One coat of white wash on old treated plastered surfaces of wall including preparation of surfaces etc complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections including removal to store complete all as specified and directed.

15 mm bore steel tubing, medium grade, galvanished with all fittings like socket, union, elbow, bend, tees etc and fixed complete to wall and ceiling or laid in floors, complete all as specified and directed.

20 mm bore steel tubing, medium grade, galvanished with all fittings like socket, union, elbow, bend, tees etc and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Refixing old steel water tubing of 15mm bore and connections in new or old position fixed to walls, ceilings and floors etc. including fittings as requiered, including cleaning of old tubing complete all as specified.

Refixing old steel water tubing of 20mm bore and connections in new or old position fixed to walls, ceilings and floors etc. including fittings as requiered, including cleaning of old tubing complete all as specified.

Taking down chowkhats or frames (without taking off shutters from the frame) exceeding 1.5 sqm but not exceeding 4 sqm each and removing from site complete all as specified.

Taking down shutter of any description area exceeding 1 Sqm and not exceeding 2 sqm each and removing from site complete all as specified.

Factory made Pressed steel frames of size 105x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 02 Nos 25x25x3mm thick angle iron projecting 10cm on either side & tarring back of chowkats and holdfasts complete all as specified & directed.

PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in back filling of pressed steel frames and similar work complete all as specified.

Factory made Pressed steel frames of size 125x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 02 Nos 25x25x3mm thick angle iron projecting 10cm on either side & tarring back of chowkats and holdfasts complete all as specified & directed.

35mm thick 2nd class hard wood plain, framed, factory made panelled shutter (one panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I), kiln in seasoned and chemically pressure treated, complete all as specified & directed.

30mm thick 2nd class HW, glazed and skeleton shutters, open rebated and prepared to receive glass / gauge (without sash bar) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass/gauge etc, sizes of members of shutters as specified in SSR part-I, section 8, clause 8.24(a), complete all as specified & directed.

Preparing surface of new wood and wood based material of any description, not otherwise described over 10 cm width or girth, and treated with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete.

Solid factory made solid panel PVC door shutter 30 mm thi.k (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width shirk inside with solvent cement for stiles and plan colour PVC sheets for top rail, lock rai & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

Description all as per item No. 33 but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M. S. tubes. The wire gauge shall be stretched to tighten firmly fixed complete all specified.

18/19 mm thick MDF board as in shutters/shelves etc exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed to frame work with screws to etc complete all as specified and directed.

100mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodized and fixed, complete all specified.

Extruded aluminium alloy handles, fabricated type, anodized size of 125 mm long complete all specified.

Aluminium anodised barrel tower bolts of extruded section and fixed of size 150mm complete all specified.

250mm aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete.

300mm mild steel, ordinary rat tail rod pattern springs including roller and roller plate complete all specified.

300mm, ordinary rat tail rod pattern springs including roller and roller plate complete with welding to steel chowkats as required fixed in repairs, complete all specified and directed by Engr-in-charge.

150mm overall length of cover plate floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all specified.

Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified.

Steel ventilator with top hung shutter including hinges,steel peg stay, complete all as specified.

M&L for two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces of any description, not otherwise described, over 10cm width or girth including preparation of new steel surface, complete all as specified and directed.

Preparation of old steel surface exc 10cm width or girth and applying two coats of synthetic enamel paints, complete all as specified.

Preparation of old painted wooden or wood based surfaces of any description not otherwise described, over 10cm width or girth including knotting and stopping as required and applying one coat of pink primer, complete all as specified.

Plain cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in roof padding, mass concrete and similar work complete all as directed by Engr-in-Charge.

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.

Brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified.

Brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4, complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Mild steel frame work conforming to Fe-290 (Gde E-165) as in grills, gratings etc. with ends of bars shouldered and/ or rivetted or forged into spikes; framed guard bars, and similar works all as specfied.

Hacking out old broken glass (any thickness, size, quality or description) from any frame surrounds, glazed with putty or fixed with beads, complete all as specified and directed.

Sheet glass ordinary quality, 4mm thick, glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, complete all as specified and as directed.

Figured glass pin headed type, 3mm thick, glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, complete all as specified.

Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified.

Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples fixed in repairs, complete all as specified.

Dismantling water tanks of capacity exc. 500 but n. exc. 1000 litres, complete all as specified.

Rotational moulded polyethylene water storage tanks of 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I.

Hoisting and fixing rotational moulded polyethylene water storage tanks any capacity capacity (cylindrical vertical with closed top) hoisted and fixed in position including taking down old serviceable tank for cleaning, complete all as specified.

Cleaning of water storage Tanks of any capacity completely by removing all dirt/dust and other type of waste from tanks and pipes and disinfection completely by making all arrengement and writing of date of cleaning on side of tank and obtaining completion from user complete all as specified.

Gun metal globe or gate valves 20mm bore pipe, with iron wheel head, screwed both end for iron pipe and fixed in repairs, complete all as specified.

20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 210 gms) complete all as specified

20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 210 gms) fixed in repairs, complete all as specified

Chromium plated fancy type Bib taps with flange, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm bore pipe fixed in repairs, complete all as specified. Make-Prayag Cat No 8608 or equivalent cat part of make as specified in Appx 'F'.

Chromium plated Stop valves/angle valves with flange, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed for 15 mm bore fixed in repairs, complete all as specified. Make-Prayag(Waves) Cat No 8310 or equivalent cat part of make as specified in Appx 'F'.

Vitreous china squatting ‘Pan’ Orissa pattern 580mm x 440mm, white, with integral foot rest including connection to trap, and to flush pipe, anti syphonage pipe etc including trap set in and including concrete and making good to floor complete all as specified. Make-Prayag Cat No-4051 or equivalent cat part of make as specified in Appx 'F'.

PVC valve less symphonic action type flushing cistern 10ltr capacity , low level white with inlet ball valve float and handle including brackets, 32mm dia PVC flush pipe fixed in repair, complete all as specified and directed. Make-Prayag Cat No-701 or equivalent cat part of make as specified in Appx 'F'.

Vitreous China, wash hand basin, flat back white of size 550mmx400mm including brackets, brass CP waste coupling 32mm dia with long screwed shank and fly nuts, 32mm dia waste pipe,including cutting for and pinning in ends of brackets or erecting stand, complete all as specified Make-Prayag Cat No-4641 or equivalent cat part of make as specified in Appx 'F'.

Pillar taps 15mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs, complete all as specified. Make-Prayag Cat No 8702 or equivalent cat part of make as specified in Appx 'F'.

Chromium plated brass stop cock 15mm dia fancy type chromium plated with long sank and cup concealed type complete all as specified Make-Prayag Cat No 9018 or equivalent cat part of make as specified in Appx 'F'.

Towel rail 600mm long of Steel CP fixed with and including chromium plated screws and wooden/plastic cleats as in repairs, complete all as specified.

Curtain rods 25 dia with Pvc coating on hollow MS steel rods fancy type with brackets, corner & fancy types fineals fixed in repairs, complete all as specified and directed.

PCC 1:5:10 type E-2 using 40 mm graded crushed stone aggregate as in sunken floor filling complete all as specified and directed.

Rendering 10mm thick cement plaster in wall of suniken floor in cement mortar (1:3) with mixing of WPC as per manufacturer's instruction finished even and fair without using extra cement all as specified and directed. Note:- WPC shall be measured & paid seperately.

Sinks with drainage board made of stainless steel 01 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm fixed in repairs, complete all as specified and directed.

100 mm thick cement concrete type B- 2, 1:3:6 as in sub base filling (40mm graded aggregate) complete all as specified and directed.

PVC (SWR) type B pipes 110mm bore single socketd in any length with rubber rings joints fixed to wall with required qty of clamps or laid in floors (ISI Marked) complete all as specified and directed.

PVC(SWR) type B pipes 75mm bore single socketed in any length with rubber ring joints fixed to wall or laid in floors (ISI Marked) complete all as specified and directed.

PVC(SWR) type B pipes 110mm bore single socketed in any length with rubber ring joints laid in trenches (ISI Marked) complete all as specified and directed.

PVC(SWR) type B bends 75mm bore, complete all as specified and directed.

PVC(SWR) type B branch piece single 'Y' equal or unequal for 110mm bore with ovel access door (ISI Marked), complete all as specified and directed.

PVC(SWR) type B branch piece single 'Y' equal or unequal for 75mm bore with ovel access door (ISI Marked), complete all as specified and directed.

PVC(SWR) type B bends any radius 110mm bore of pipe with ovel access door (ISI Marked), complete all as specified and directed.

PVC(SWR) type B bends any radius 75mm bore of pipe with ovel access door (ISI Marked), complete all as specified and directed.

PVC(SWR) type B vent cowl for 75mm bore pipe (ISI Marked), complete all as specified and directed.

Dismantling PVC/cement/CI pipes incl fittings of different bore of pipes and removing from site ( 75mm to 100mm), complete all as specified and directed.

Demolition of cement concrete of any description and in any position and removing the rubbish from the work site out side defence permises, complete all as specified and directed.

75mm thick PCC 1:2:4 type C-1 using 40mm graded crushed stone aggregate as in floor/ plinth protection laid in alternate bays finished even and fair including joints filling by using mastic filling comprising one part of bitumen 85/25 mixed with three parts of coarse sand by weight complete all as directed.

Repairing of concrete surfaces such as balconey, chajjas, upward or downward facias, column, Piller, ceiling and similar items with plain cement concret 1:2:4 type B-0 & rendering any thickiness in CM 1:3 without using extra cement finished even and fair complete all as specified and directed (Up to fourth storey bldg and including necessory formwork and scaffolding reduired as per site conditions also taking down or dismantiling as required at site).

Repair to steel window, ventilators (including slot pin, hinge,hook and eye of standard quality where required), resecuring of windows wire gauge and railing/grills by using welding equipments, complete all as directed.

Sealing of joints of rain water pipe at roof by using neat white cement paste or leak proof material and making the joint leakproof in case seepage is observed from WC/Floor trap and joint of rain water pipe and roof slab, complete all as directed. Note : Work to be carried out up to 4th storey bldg in any condition of working place/area

Securing glass of any description in existing matel frames glazed with putty/beads including removing loose or decayed putty/beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work, complete all as directed. (New length of frame reputtied shall be measured)

Taking down of old Z Section window with projected hings and refixed in same position with box type hinges of 100 long as directed by Engr-in-charge.

150 mm long Mild steel pressed handles, oval type, stove enamelled black fixed in repair at any height of bldg, complete all as directed.

Mild steel Casement stays, size 300mm, with hinged joint and two plates with studs complete all as directed.

Providing precast cement concrete louvres and jallies, 40 mm thick(1:2:4) Type B-0 set in CM 1:6, including all mouldings and dismantiling of old unsv broken RCC Jaliies at site, complete all as directed.

PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement with grating complete all as specified and directed.

Demolition of Reinforced cement concrete of any description and in any position and removing the rubbish from the work site out side defence permises, complete all as directed.

RCC type B1, 1:2:4 using 20 mm graded aggregate as in slab supported with wall, beam, column in floor, roof, landing etc., complete all as directed.

Form work to soffits of suspended slab such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick for rough finished surfaces of concrete, complete all as specified and directed.

TMT steel bars 10mm dia and above as in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia), all as specified and directed.

Welding in repairs n. exc 2.5cm in length, thickness of metal to be welded exc 6mm but n exc 9mm, complete all as specified and direcetd by Engineer-in-charge.

Stainless steel tray (03 trays in each sets) complete all as specified and directed by Engineer - in - charge.

Chromium plated soap dish complete all as specified and directed. Make-Prayag Cat No-BA-25 or equivalent cat part of make as specified in Appx 'F'.

Toughened glass shelf 500mm long 60mm wide with railing fency type as in repairs all specified and directed by Engr-in-charge. Make-Prayag Cat No-BEA-47 or equivalent cat part of make as specified in Appx 'F'.

Chromium plated shower rose 100mm overhead with 225mmarm & flange size including fixing to steel pipefixed in repairs, complete all as specified. Make-Prayag Cat No-BOS-87 or equivalent cat part of make as specified in Appx 'F'.

Steel grating 125mm dia with or without waste hole complete all as specified. Make-Prayag Cat No-FT-07 or equivalent cat part of make as specified in Appx 'F'.

E&M PORTION:- Taking down carefully unsv aluminium / copper conductor point wiring (light, fan, light socket, power socket) complete fitting such as swithes, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed.

Taking down carefully unsv main switch / DBs alongwith MCBs / wooden board / connected fittings & fixtures any type and making good distrubed surface of walls and roofs to match the existing surface, complete all as specified and as directed. Note:-Old serviceable switches & MCB shall be taken on charge by the MES for reuse and unsv fittings shall be credited to the contractor.

Point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLS PVC insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLS insulated drawn in and including concealed PVC rigid conduit / surface PVC casing caping medium grade of required size ISI marked with & including MS sheet metal sunken / terminal box 1.2mm thick of required size / module including white cover plate with frames & all necessory wall cutting and making good disturbed surface and all items as per the requirement of the work at site for modular fittings, complete all as directed and specified.

One light/fan point controlled by one, one way switch 6 Amp complete all as specified.

One 3 pin socket outlet 6 amp independent complete all as specified.

One 3 pin socket outlet 6 amp on same board complete all as specified.

One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq.mm size, complete all as specified and directed.

Description all as per srl item No 113 here in before but for one light point controlled by two way switchs, complete all as specified.

Description all as per srl item No 113 here in before but for one 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire.

Modular switch 1 way 6A, 1 module, (ISI marked), complete all as specified.

Modular Socket, 6A - 2/3 pin combined 2 module, (ISI marked), complete all as specified.

Modular switch 1 way 16A, 1 module, (ISI marked), complete all as specified.

Modular Socket, 6A/16A - 2/3 pin combined 2 module, (ISI marked), complete all as specified.

Modular fan step regulator, 120W - 2 module (ISI marked), complete all as specified.

Modular switch 2 way 10A 1 module (ISI marked), complete all as specified.

Ceiling rose (ISI Marked) 3 Phase PVC/poly carbonate, insulated body, compete all as specified.

Tube light fitting box type suitable for LED 18-20W tube Rod with end cap made out of CRCA sheet powder coated complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting including 18-20LED tube rod 4 feet long complete all as specified and directed. Make:-Crompton Cat Part No:-LTT8-20 for LED tube rod & DMLN1LT8-16 for fittings or Equivalent cat part of make as specified in Appx 'F' here in after. Note :- The LED batten and LED tube rod shall be of same make.

Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

LED lamp 7W B-22 holder base with polycarbonate body, complete all as specified. Make:- C&S Cat Part No-LTHPLEDLAMP7W/B22 or Equivalent cat part of make as specified in Appx 'F' here in after.

Sheet metal enclosure factory made (Double door) for DBs, single pole and neutral, 240 volts, 8 way with 200Amps rated bus bar fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning with & including taking down old unsv DBs complete all as specified. Make:- INDOASIAN cat part No-811807 or Equivalent cat part of make as specified in Appx 'F' here in after.

MCB single pole and neutral 32 amps 240 volts 10 KA 'C' series all as specified. Make:- INDOASIAN cat part No-811151 or Equivalent cat part of make as specified in Appx 'F' here in after.

MCB single pole and neutral 40 amps 240 volts 10 KA 'C' series all as specified. Make:- INDOASIAN cat part No-811152 or Equivalent cat part of make as specified in Appx 'F' here in after.

MCB single pole 6 to 32 amps 240 volts 10 KA 'C' series all as specified. Make:- INDOASIAN cat part No-811122 to 811129 or Equivalent cat part of make as specified in Appx 'F' here in after.

Sub main wiring with single core cable 2x 6 sq mm FRLS insulated unsheathed stranded copper conductor cable 1100 Volts grade including 20mm cancealed PVC rigid conduit / surface PVC casing caping medium grade alongwith 1x 4 Sq mm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface with & including taking down old unsv sub main wiring of any type, complete all as specified and directed. Note:-2 wire of 6sqmm,1 wire 4sqmm and one run of pvc conduit shall be measured as one unit.

Supply and fixing AC single phase 240 Volts 50 HZ ,ceiling fan of size 1200mm Sweep complete in white colour ,5 Star rating with canopy with all accessories incl nuts,bolts,clamps etc. for fixing ceiling fan in GI pipe if required at site and provision of flexible copper conductor cable 3 core from ceiling rose to fan complete all as specified and directed. Make :- Havells Cat Part No ES-50 Premium, Crompton Cat Part No Entrust 50 or equivalentas specified in list of make mentioned in Appx 'F'.

Taking down of ceiling fan ,dismantling blades and depositing Fan and blades in MES store yard of AGE E/M, complete all as specified & directed.

Taking down of exhaust fan ,dismantling and depositing Fan in MES store yard of AGE E/M, complete all as specified & directed.

Fixing only of the existing exhaust fan complete with louvers for wall mounting as obtained from item No-23 above, incl grouting, holding down bolts, nuts, washers and provision of flexible copper conductor cable 3 core from ceiling rose to exhaust fan complete all as specified and directed.

Integrated LED Bulk Head luminaire comprises of a highly cost effective, compact, ultra low energy, huilt in engineering plastic housing with clear prismatic diffuser suitable for indoor and outdoor applications with IP 65 protection with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to bulk head fitting including Led lamp of 10W complete all as specified and directed. Make: C&S Electric Cat Part No CG80IB10WLED or Equivalent cat part of make as specified in Appx 'F' here in after.

Single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 20 Amp 24 volts, complete all as specified

Vertical distribution board TPN IP 43-'IK 09 with bus bars neutral links blanking plates double door suitable for FP MCCB as incommer and out going SP/TP MCBs 6 ways with & including MCCB four pole 63 Amp 415 volts of 16 KA breaking capacity with adjustable thermal, complete all as specified and directed. Make of VTPN:-INDOASIAN Cat part No :-811889 and Make of MCCB:-INDOASIAN Cat part No :-830240 or equivalent cat part of make as specified in Appx "B" here in after. Note:- MCCBs and DBs shall be of same make.

Earthing complete with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironincluding PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh, 15mm dia bore light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection pipe, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion. Note:- Rate for earth lead wire & protection pipe upto 7.5mtr length are inclussive in this item & no extra payment shall be admissible for the same.

M/S shakti steel industries

M/S Shesh Paul Gupta

M/S ANIL MAHAJAN