New Construction of Urban Primary Health Center at balarengapuram in Ward No 44 Zone -4

Amount

Earth work excavation in all kinds of soil except hard rock requiring blasting inclusive of shoring, strutting and bailing out water wherever necessary refilling the sides of foundation with excavated earth in layer of 15 mm thick well rammed and consolidated depositing the surplus earth within compound, clearing and leveling the site with initial lead of 10m etc., and lift of 2m etc., complete.

Supplying and filling in foundation and basement with filling Quarry Dust in layers of not more than 15cm.thick well rammed watered and compacted etc., complete complying with standard specification.

Supplying and filling in foundation and basement with filling Quarry Dust in layers of not more than 15cm.thick well rammed watered and compacted etc., complete complying with standard specification.

Supplying and filling in foundation and basement Filling well graval in layers of 15cm thick well rammed and consolidated including watering complying with std. Specification etc, complete.

Plain cement concrete in 1:4:8 (one cement four sand and eight aggregates) with 40mm gauge hard broken granite jelly for foundation including consolidation and dewatering for foundation wherever necessary etc., complete.

Supplying and erecting shuttering with necessary supports for plain surface such as RCC boxing side slab, and similar, RCC slabs with all cross bracings etc., complete in all floors of any height (The retrieved materials should be taken back by the contractor). The payment for centering shall be given after the concrete is laid. ( vertical Portion only )

Supplying and erecting shuttering with necessary supports for plinth beam with all cross bracings etc., Complete : (RCC Column footing plinth beam and lintel side) using steel plate and angles, S.I. No. 155 - 10 M2

Supplying and erecting Steel centering for size and softest support for plain surface such as reinforced cement slap rectangular beams tee or L beams lintels bed blocks stair and landing slap landing beams, beams canopy etc., comp. in all any height (The retrieved materials should be taken back by the contractor). ( Bottom Only )

Supplying fabricating and placing in position of MS grills for reinforcement rate including the cost of steel for all works (the rate to include cost of binding wire also)

Reinforce Cement concrete 1: 1 ½ : 3 (One cement one and half sand and three aggregates) with 20mm gauge machine broken gauge hard broken granite chips including curing and finishing etc., complete for R.C.C. item excluding the cost of reinforcement grills in position and centering shuttering etc.

Brick work in CM 1:5 (one cement & five sand)using II class ground moulded bricks of size 9"X 4 3/8" X 2 3/4" including finishing, curing ,etc., complete complying with standard specification - 100CFT For Basement

Brick work in CM 1:5 (one cement & five sand)using II class ground moulded bricks of size 9"X 4 3/8" X 2 3/4" including finishing, curing ,etc., complete complying with standard specification - 100CFT Super Structure in Ground Floor..

Plastering with cement mortar 1:3, 10 mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Dadooring the sides of wall with Vitrified Marbonite tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over abase layer of cement mortar 1:3 (one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid with out any air gap in the tiles neatly and fixing in position as per standard specifications

Paving the floor with design Anti skirt ceramic tiles (colour and shade as directed) of size 305mmx305mmx6mm in all floors over abase layer of cement mortar 1:3 (one cement and three sand) 20mm thick laid in-situ and pointed with same coloured cement Colour

Dadooing walls with Glazed tiles of sizes 305mm X 200mm X 6mm size of approved make and quality and colour lSetin cement mortar 1:2 (one cement, two sand) over 10mm base layer plastering and pointing with white cement neatly as directed.

Supplying, fabricating and fixing in position of Alumi.Anod.natural colour matt finish door half glazed and half PLB board using 12mm thick PLB board and 5.5mm thick glazed door using rectangular Alu.Box section of following sizes for frame and shutter with necessary accessories such as rubber beading, A1 clips, Best double action floor springs, Aluminium Handles on both sides, floor stopper, Tower bolt, Locks and glass including all materials, Labour, Power consemption charges required for fabrication if necessary chipping, dismantlling making necessary holes in RCC columns, Beams or Mansory wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc., complete. The Alumi. surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868/1962 of Anodic filthickness of not less than 15 Microns (Fifteen) for all sections

Supplying and fixing UPVC (un-Plasticized Polyvinyl Chloride) windows of casement type (open) from the profile the size of outer frame 60mmx58mm and sgutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi rubber (black colour) covered with over all the edges of frame and shutter the shutter will be providded with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging stroms and should have key lockable action. security protective hinges, strong locking systems and as per size for areesting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with primer including all costs such as welding, griding and fabrication charges, cost and conveyance of all materials to site etc complete as per standard specifications

Supply and fixing of PVC solid doors using 19gauge 19mm MS.Sq tubes for styles and frames, 15mm MS Sq.tubes for to, Lock and bottom rails, The steel tubes shall be covered with 5mm fixed in position including furniture and fittings. The over all size of styles shall be 50mmx30mm. The over all size of top rail, Lock rail and bottom rail and bottom rail shall be 75mmx30mm. The over complete as per standard specification.

Weathering Course concrete with broken brick jelly of 20mm gauge in pure slacked lime over roof slab including laying consolidating finishing etc., complete.

Finishing the top of weathering course with one course of pressed tiles of size 230 x 230mm laid in CM 1:3 12mm thick, mixed with water proofing compound and pointing with the same mortar mixed with red oxide etc complete.

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m.

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m.

Supplying & delivery of fixing HDPE tank of 2000 it capacity as per IS 1207/1996 including loading&unloading transpoting & labour charges and fixing GI pipes & specials for pipe connections works including cutting threading and fixing charges etc., complete

Supplying and fixing in position white glazed European Water closet of best quality and approved make with 100mm 'P' os 'S" trap with double flapped rigit PVC seat cover with CP brass hinges with 12.5 liters PVC Low lwvwl flusing tank with all internal fittings etc., complete complying with standard specifications, labor inclusive of fixing low lwvwl flushing tank

Supplying and fixing in position Indian water closet of size 580X440mm, white glazed earthenware of approved quality with 'P' trap or 'S' trap confirming to IS:2556-PartXII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes / PVC pipes by dismandling brick masonry, reinforced cement concretero of / floor slab and making good the disturbed portion to original condition with out leakage etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying and fixing in position best quality approved make white glazed earthen ware wash hand basin of size 550X400mm with a pair of castiron bracket, including cost of 15mm dia metre brass chromium plated piller tape, 32mm dia metre C.P. Waste union, 32mm dia metre P.V.C. waste pipe with rubber plug and chain, 15mm dia metre G.M. wheel valve, 15mm dia brass nipple, 15mm dia nylon connection setc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications

S/F in position of Indian Make White/Colour glazed earthen ware lipped mouth Flat Back Urinal of best approved quality with G.I.Pipe connection to suitable length,32mm bell mouthed P.V.C connection, 15mm dia G.M.Wheel valve, fixing the urinal to the wall in position with necessary T.W.plugs, clamps, screws, shellac etc., including dismantling masonry if necessary and redoing the same to original condition, fixing the 15mm dia. G.I.pipe connection and wheel valve, painting the pipe with two coats of approved paint over one coat of primer and checked without any leakage complete, complying with standard specifications. - White & Colour

Supplying and fixing of cuddapah slab (one side polished) , size of 38 / 40mm Thick including pointing with CM 1:3 and finishing etc, complete,

White Porcelain Sink of size 600mm x 450mm x 200mm with 32mm dia 'B' Class GI Waste Water Pipe and 32mm dia CP Waste Coupling

Supplying and laying in flooring with fully polished Sinthetic Grey colour Granite stone of 20mm thick (average)of 4'X2' in size laid over base layer of cement mortar1:3(one cement and three sand)- 20mm thick and applying cement slurry& pointed with white cement and colour pigments to the colour of stone sand polished neatly as directed by the deparmental officers

Wiring with 2 x 1.5 sqmm (22/0.3) PVC insulated unsheathed Sc Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T. switch inflush with wall, covered with hylem sheet of 3mm thick with painting of suitable colour for concealed PVC light point / fan point (For electronic regulator)(SD-18)

Supply and fixing of single box type 4'20 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting.(SD 88)

Supply and fixing of 6A/16A 3 pin combined flush type modular wall socket and 16A flush type modular switch concealed in suitable metal flush box in flush with wall and covered with suitable cover plate with frame

Supply and fixing of 4No 6A/16A 3 pin combined flush type modular wall socket and 1 no 16A flush type modular switch concealed in suitable metal flush box in flush with wall and covered with suitable cover plate with frame

Supply and fixing of 20 Amps DP plug and socket in sheet steel enclosure with 32A DP MCB in flush with wall with earth connection (for AC plug) (SD-140)

Supplying and fixing of Orient make metallic colour 5star rated as per the BEE specifications 1200mm (48") sweep AC ceiling fan (Havells/Crompton/Usha/equivalent) with stepped electronic 300w regulator with 300mm down rod on the existing clamp etc.,

Providing Rain Water Harvesting arrangements in corporation building by inserting of 150mm PVC slotted casing pipe, including earth work excavation for 900mm precost cement Ring 5nos filling with One, three, Fifth Rings are 40mm metal and Two and Fourth Rings are Sand providing necessary pipe line arrangements eith std specification etc, complete

LED Indoor fittings (Light Enitting Diode ) 18w LED 300k square type recessed fitting higher end philips/Havelles/Equivalent

Conducting Geological survey to fix the borewell point

Drilling 150mm dia borewell in all kinds of soils expect hood rock by first taking pilot bore and than enlarged to the required dia to enable to inserting the P.V.C. casing pipe by directed rotary mud and circulation method including all labour and hire

Supply of 150mm dia O.D. P.V.C. casing pipe

Labour charges for inserting the casing pipe assembly in the drilled bore including jointing the pipe etc. complete

Drilling 150mm dia vertical bore in hard rock to any required as directed by Corporation Officers including charges for drilling and Water required for drilling and fuel charges

Developing the borewell with air compressor of 300cfm capacity (min 8 hours) including transporation labour and fuel charges for comperessor as directed by corporation yield test by 'V' notch method.

Construction of Inspection Chambers of following sizes with earth work for foundation with 25cm thick brick jelly cement concrete bed in C.M 1:4:10 using 40mm brick jelly for foundation brick work in C.M 1:6 for chambers, plastering with C.M 1:3 12mm thick benching, channelling, 75mm thick RCC loose slab covering in CM 1:2:4 mix using 20mm blue granite jelly including necessary reinforcement etc complete 60x60x90cm MDU-CORP- Data Page No:92-SL-146

Supply and delivery of 3 phase wet type submersible pumpset with duly 50tpm x 100m head inform to IS 8034/88 with stainless steel shaft dynamically balanced SS impeller SS pump and motor casings and directly coupled to suitable.

Supply and delivery of well mounting type control panel board made from MS sheet 18 SWG vertin proof box type comprise of suitable DOL Slater MCB volt meter 0 to 250V range for 3 phase pump set. Ammeter (0 to 15 Amps range) overload relay).

Supply and delivery of PVC insulated and sheathed 4sqmm copper cable conforming to IS 694/1990 suitable for submersible pump set.

Supply and delivery of MS Kisok of size 0.75 x 0.45 x 0.75 made up of MS angles of size of 50 MM x 50 MM x 4MM alround covered with 16 gauge M.S. sheet and Kisor door made up of M.S. Plates of size 15mm x 3mm including cutting welding grinding and locking arrangements.

Supply and delivery and fixing GI pipes and specials as per is specification. 40mm UPVC Pipe

32mm GI Adapter

Borewell Clamp

Borewell Cover

32mm GI bend

32mm GI NRV

Labour charges for erection of submersible pump set Borewell including fixing and jointing submersible cable with proper clamps, pressure gauge upto the exterior wall of the pump room / Kisok and erection of panel board consisting of TPICN switches starter volt meter ammeter the indicator tamp capacitor single phase preventorater level guard laying and jointing if cables and earthing complete the pumpset on trial for 3 days.

Labour charges for over head wiring from EB pole to pump room by fixing 32mm dia GI pipe to the required height over roof slap of pump room ads directed by EB authorities including fixing copper wire in four layers and inslulated with proper reels wire required MS clampset supp delivery and fixing of all materials such as bore well cover clamp set U kondi 7/20GI wire insulated reels 24 18 TW meter board 10x4 aorial board PVC Tape roll copperd earth plate GI bolt and nut with washer nutral linkPVC insulted copper wire (7/20 wire up to 10 HPm 7/16 wire above 10hp)1”PVC hose pipe 1” PVC clamp 25mm PVC encacing pipe 332AMPS fuse carroar 6no 10HP and 60 amps fuse carrier. (TWAD Data No.P-101

Supply and Delivery Fabrication of MS Doors with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete.(1.00m x2.00 m)

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Providing & fixing PVC RAIN WATER DOWN FALL PIPE of the following dia with necessary T.W. Clamps Plugs, Shoes, Bemds, other clamps, screws nails etc., complete complying with standard specification. The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak Wood plugs use dia 150X25mm infront & 200x75 mm in rear(wallside with a depth of 110mm. The pipe is to be fixed by means of "U"clamps at the centre of pipes to be fixed. 110mm dia PVC Pipe [4 Kg/SqCm]

ADD GST 18%

R UDHAYA KUMAR