CA NO. GE AF NO.1/GUR-57/2024-25 REPAIR TO STEEL FURNITURE INCLUDING PAINTING TO STEEL FURNITURE AT AF STN PALAM AND GURGAON UNDER GE(AF) GURGAON NO 1.

Amount

Removal of following existing unserviceable steel/UNSV components of various furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing, welding, gluing, providing hinges, denting, applying putty for leveled surface, placing every part in-tact and painting the disturbed portion of Almirah Steel Medium Complete all as specified and as applicable as drawings,FD-1032. NOTE : Work will be executed where the furniture exist in different User Units of GE Air Force Gurgaon No 1 including BSO's Furniture Yard at Gurgaon and palam as directed by Engineer-in-Charge:-

Removing of unserviceable and worn out legs and providing new legs made out of 1mm thick MS sheet fabricated to shape as per existing almirah steel with shelves/Half S & Half H Large complete all as specified and directed.

Removing of unserviceable shelves and providing new shelves made out of MS sheet 1.00mm thick with fixing brackets of existing type almirah Med steel complete all as specified and directed.

Material and labour for removing unserviceable shutter and providing new shutter using MS sheet 1.00mm thick as per existing shape Almirah Med steel. (Drg No FD-1032) complete all as specified and directed.

Taking down existing unserviceable MS clips with screw/nuts and bolts of almirah steel with shelves/Half S & Half H medium (Drg No FD-1032) refixing/weldling with new items, MS clips with screws/nuts & bolts complete all as specified and directed.

All as per item No 1.03 above but locks (6 levers ) of make link or Harrison approved by GE.

All as per item No 1.03 above but CP handle with bolt.

All as per item No 1.03 above but mild steel locking rod.

All as per item No 1.03 above but locking box / device

Scratching of scracheds/dentings to powder coated steel surface with emery paper, applying metel putty wherever required and repair inside/out side with Spray painting (Hammer tone/Normal) duly matched with existing surfaces or as directed by Engr-in-charge.

Scratching of scracheds/dentings to powder coated steel surface with emery paper, applying metel putty wherever required and repair inside only with Spray painting (Hammer tone) duly matched with existing surfaces or as directed by Engr-in-charge.

Scratching of scracheds/dentings to powde coated steel surface with emery paper, applying metel putty wherever required and repair out side only with painting Spray duly (Hammer tone) matched with existing surfaces or as directed by Engr-in-charge.

All as per item No 1.00 here-in -before but ALMIRAH LARGE STEEL FD-67(M)/350 /1031:-

Removing of unserviceable and worn out legs and providing new legs made out of 20 gauge MS sheet fabricated to shape as per existing almirah steel with shelves/Half S & Half H Large complete all as specified and directed.

Removing of unserviceable shelves and providing new shelves made out of MS sheet 1.00mm thick with fixing brackets of existing type almirah large steel complete all as specified and directed.

Material and labour for removing unserviceable shutter and providing new shutter using MS sheet 1.00mm thick as per existing shape Almirah large steel. (Drg No FD-1031) complete all as specified and directed.

Taking down existing unserviceable MS clips with screw/nuts and bolts of almirah steel with shelves/Half S & Half H Large (Drg No FD-1031) refixing/weldling with new items, MS clips with screws/nuts & bolts complete all as specified and directed.

All as per item No 2.02 above but locks (6 levers ) of make link or Harrison as approved by GE.

All as per item No 2.02 above but CP handle with bolt.

All as per item No 2.02 above but mild steel locking rod.

All as per item No 2.02 above but locking box / device

Scratching of scracheds/dentings to powder coated steel surface with emery paper, applying metel putty wherever required and repair inside/out side withSpray painting (Hammer tone) duly matched with existing surfaces or as directed by Engr-in-charge.

Scratching of scracheds/dentings to powder coated steel surface with emery paper, applying metel putty wherever required and repair inside only with Spray painting (Hammer tone) duly matched with existing surfaces or as directed by Engr-in-charge.

Scratching of scracheds/dentings to powde coated steel surface with emery paper, applying metel putty wherever required and repair out side only with painting Spray (Hammer tone) duly matched with existing surfaces or as directed by Engr-in-charge.

All as per item No 1.00 here-in -before but TABLE BEDSIDE STEEL ,FD/E6/MAP/15®

18/19mm thick exterior MDF board for sides, top and front of table bed side of size 450mmx500mm placed in position with 4mm thick teak wood edging alround the edges of the top as shown in drg with screws.

Legs to table bed side steel made of 18mm MS square pipe placed in position as shown in drg.

CP steel 100mm long handle to the drawers of the table bed side steel placed in position as shown in drg.

Supply and fix new drawer front both for table bed side made of MDF board 18 mm All as per Drg.

Replacement of worn out conduct MS 25 mm Sq pipe 16 gauge whrerever required as directed and fixing as shown on drg . (welding points shall be measured and paid separately.

Mig welding of broken joints MS members (tabular) .

Supply and fix plywood back 6 mm BWR grade for table bed side All as per Drg.

Material and labour for Scrapping of old polish and dirt from the surfaces of bidding by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.

Painting with one coat of black synthetic enamel paint to complete table etc. all as specified and directed.

Supply and fixing of sides and bottom of Bed side table : It shall be made out of one side melamine faced pre-laminated MDF board exterior 18mm thick confirming to IS in baverian beach shade as per drg .

Supply and fix suitable PVC shoes of superior quality .

All as per item No 1.00 here-in -before but TEAPOY VERANDAH,FD-255/383,FD/E6/MAP/17

Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm exterior MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed.

25mmx3mm flat iron on top of legs of length 800mm welded to existing flat iron at top placed in position as shown in drg.

Material and labour for replacement of worn out 10mm dia MS bar wherever required as directed and fixing as shown on drg. (Note :- Welding points shall be measured and paid separetly).

MIG welding of broken joints MS members For table .

Rubber shoes 18mm square of high quality placed in position as shown in drg.

Material and labour for carrying out minor repairs like denting & gas welding of broken Frame etc and painting with one coats of the White colour synthetic enamel paint to complete table etc complete all as specified and directed.

All as per item No 1 here-in -before but CHAIR SCHOOL WITH HAND BOARD,FD/E6/MAP/05/TP

Scratching the entire frame of chair with sand emery paper and applying one coat of synthetic enamel grey colour after preparation of surfaces. Complete all as specified and as directed by Engr-in-Charge.

One piece PVC seat and back and fixing the same by providing four screws as described in drg.

18mm thick MDF board top open able/hand board with 4mm thick teak wood edging including polish and fixing the same by providing hinges/screws as described in drg

Hard rubber shoes as per drg

All as per item No 1.00 here-in -before but TABLE COMPUTER, FD/E6/MAP/03,TP

Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm exterior MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed.

Key board tray of table with telescopic chanel

Remove UNSV Telescopic chanel and fixing of New telescopic chanel

Drawer of table with telescopic chanel

Shelves of table

vertical side shelf

Painting with one coat of black synthetic enamel paint to complete table etc. all as specified and directed.

All as per item No 1. here-in -before but BOOK CASE STEEL- FD-1028/356/TP

Applying one coat of synthetic enamel paint olive green/Grey including preparation of old painted surfaces after necessary denting to Book case steel shown on drg (FD-1028) complete.

Lock 4/5 levers godrej pattern, including two keys and including removing of unserviceable lock from Book case steel shown on drg (FD-1028) complete.

Handle steel chromium plated size- 100mm long including removing of unserviceable handle steel from Book case steel shown on drg (FD-1028) complete.

Glass pane 3mm thick including removing of unserviceable/broken glass pane from Book case steel shown on drg (FD-1028) complete.

All as per item No 1. here-in -before but RACK STEEL Adjustable open type ,FD-1038/TP

Back to rack six tiers steel made of 1mm thick MS sheet of size 1905mmx915mm fixed in between vertical angle iron with nut and bolts as shown in drg.

Sides to rack six tiers steel made of 1mm thick MS sheet of size 1905mmx610mm fixed in between vertical angle iron with nut and bolts as shown in drg.

Shelves to rack six tiers steel made of 1mm thick MS sheet of size 915mmx610mm made to shape and fixed in between opposite vertical angle iron with nut and bolts as shown in drg.

One coat of synthetic smoke grey paint on all steel portion of rack complete.

All as per item No 1. here-in -before but SIDE RACK WITH TRAY STEEL, FD-1023/TP or similar .

Back to rack three tiers steel made of 1mm thick MS sheet of size 840mmx710mm fixed in between vertical angle iron with nut and bolts as shown in drg.

Sides to rack three tiers steel made of 1mm thick MS sheet of size 355mmx710mm fixed in between vertical angle iron with nut and bolts as shown in drg.

Shelves to rack six tiers steel made of 1mm thick MS sheet of size 840mmx355mm made to shape and fixed in between opposite vertical angle iron with nut and bolts as shown in drg.

One coat of synthetic smoke grey paint on all steel portion of rack complete.

All as per item No 1. here-in-before but CHARPOY FOLDING IP WITH HARD TOP, FD-388 (R )

12 mm commercial BWR Grade ISI ply placed in position as shown in drg.

Supply and fixing new rubber shoes 25mm dia of high quality placed in position as shown in drg.

Scratching of scraches/ dentings to powder coated steel surfaces with emery paper ,applying metal putty wherever required and repair with painting duly matched with existing surfaces.

All as per item No 1.00 here-in -before but BED HARD STEEL (FD/E6/MAP/08(R ) / IP

12 mm commercial BWR Grade ISI ply placed in position as shown in drg.

Rubber shoes 32mmx32mm of high quality placed in position as shown in drg.

Scratching of scraches/ dentings to powder coated steel surfaces with emery paper ,applying metal putty wherever required and repair with painting duly matched with existing surfaces.

Head Rest as per drg (MDF Board Exterier)

Foot Rest as per Drg (MDF Board Exterier)

All as per item No 1. here-in -before but RACK STEEL 9'x4'x2'

Back to rack six tiers steel made of 1mm thick MS sheet of size 2700 mmx1200mm fixed in between vertical angle iron with nut and bolts as shown in drg.

Sides to rack six tiers steel made of 1mm thick MS sheet of size 600mmx2700mm fixed in between vertical angle iron with nut and bolts as shown in drg.

Shelves to rack six tiers steel made of 1mm thick MS sheet of size 1200mmx600mm made to shape and fixed in between opposite vertical angle iron with nut and bolts as shown in drg.

One coat of synthetic smoke grey paint on all steel portion of rack complete.

All as per item No 1. here-in -before but CHAIR COMPUTER/Revolving FD/E6/MAP/01/TP

Removing unserviceable damaged Seat & back of Chair computer, supply and upholstered with crape fabric and moulded polyurethane foam with PVC lipping all round. The polyurethane foam shall be 50 mm thick and shall be moulded with density 50-55 Kg per cubic Mtr on Hampden machine ,all as directed and specified by Engr -in -charge

Removing old unserviceable arm rest of chair computer and S&F new one made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed by Engr -in –charge.

Removing unserviceable castor twin wheels and S&F new castor twin wheel suitable for chair computer all as directed

Removing unserviceable Base and S&F new Base suitable for chair computer all as directed

Removing unserviceable hydrolic lift suitable for chairr all as specified and directed by Engr -in charge.

Removing of old unsv tapestry cloth and supply and fixs new crape cloth (rate should not be less than INR 120/- per RM) as apporoved and directed by in Engr charge.

All as per item No 1. here-in -before but CHAIR VISITOR ,TP MAKE GEEKAEN / E S C / GODREJ / ETC

Removing unserviceable damaged Seat & back of Chair visitor. Supply and fixing the seat made of 12 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round. The polyurethane foam shall be 50 mm thick and shall be moulded with density 50-55 Kg per cubic mtr on Hampden machine.

Painting the entire frame with one coat of synthetic enamel paint 1st quality including preparation of surface of chair writing officers including handle all as directed by Engr -in -charge.

Removing old unserviceable arm rest of chair writing officer and S&F new arm made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed by Engr -in -charge.

Removing of old unsv tapestry cloth and supply and fixs new cloth (rate should not be less than INR 120/- per RM) as apporoved and directed by in Engr charge.

Removing old broken rubber stopper of the chairs and S&F new Rubber stopper at bottom all as directed and specified by Engr -in -charge

All as per item No 1.00 here-in -before but CHARPOY IP WITH HARD TOP ,FD/MAP-II/01

12 mm commercial BWR Grade ISI ply placed in position as shown in drg.

Rubber shoes of high quality placed in position as shown in drg.

Scratching of scraches/ dentings to powder coated steel surfaces with emery paper ,applying metal putty wherever required and repair with painting duly matched with existing surfaces.

All as per item No 1.00 here-in -before but CHAIR REVOLVING EXECUTIVE(LOW AND HIGH BACK)/CHAIR CONFERENCE TP MAKE GEEKAEN/E S C/GODREJ/ETC & FD/E6/MAP/01

Removing of old fabric and pressed molded polyurethane foam cushion from seat and back of chair revolving executive after carefully removing the PVC lipping from the edges of the seat and back of the chair, Supply and fixing new moulded polyurethane foam cushion 50mm thick and fabric over the seat and back of the chair as per the existing shape of the chair duly providing new PVC lipping all-round the edges of seat and back of the chair complete all as specified and all as directed by Engr-in- Charge.

Removing the old unserviceable arm of the chair revolving executive by unscrewing the bolt from the inner side, Supply and fixing new arm to the chair revolving executive of the same shape and size as of existing one. The arm shall be of black integral skin polyurethane reinforced with MS insert, it shall be scratch and weather resistant.

Removing the old unserviceable complete pedestal assembly along with hydraulic system of chair revolving executive by removing the pin from bottom carefully without damaging the upper portion. Supply and fixing new pedestal assembly along with hydraulic system of chair revolving executive with standard workmanship .The pedestal assembly shall consists of two wheel coasters for smooth running of chairs and shall have gas lift mechanism complete all as specified and all as directed by Engr-in- Charge.

Removing of old unsv tapestry cloth and supply and fixs new cloth (rate should not be less than INR 120/- per RM) as apporoved and directed by in Engr charge.

Removing unserviceable castor twin wheels and S&F new castor twin wheel suitable for chair computer all as directed.

All asper Item No 1. here -in- before but SOFA single seater/ two seater /three seater chrome plated arms and legs (TP) MAKE GEEKAEN / E S C / GODREJ / ETC

Continuous Gas welding as required .

Taking out old pressed /torn old cushions fron sofa single seater of size 800 mm (L)x800 mm(D) x 815 mm (H)and Supply 40 density thick foam cushion duly covered with good quality leatherite tapestry all over(Not less than Rs 300 per metre)cloth of approved color and shade by GE.

Taking out old pressed /torn old cushions fron sofa two seater of size 1870 mm (L)x 800 (D) x 815 mm (H)and Supply 40 density thick foam cushion duly covered with good quality leatherite tapestry all over(Not less than Rs 300 per metre)cloth of approved color and shade by GE.

Taking out old pressed /torn old cushions fron sofa three seater of size 2110(L)x 965(D) x 825(H) and Supply 40 density thick foam cushion duly covered with good quality leatherite tapestry all over(Not less than Rs 300 per metre)cloth of approved color and shade by GE.

Taking out old torn/ faded cushion leatherite cover from foam cushions of sofa single seater of size 800 mm (L)x800 mm(D) x 815 mm (H) and supply and fixing new leatherite cushion cover to the existing cushion. The cover of the cushion shall be of best quality leatherite upholstery ( Not less than Rs.300 per meter) as approved by GE complete . All as specified and directed by Engr-In-charge

Taking out old torn/ faded cushion leatherite cover from foam cushions of sofa two seater 1870 mm (L)x 800 (D) x 815 mm (H)and supply and fixing new leatherite cushion cover to the existing cushion. The cover of the cushion shall be of best quality leatherite upholstery ( Not less than Rs.300 per meter) as approved by GE complete . All as specified and directed by Engr-In-charge.

Taking out old torn/ faded cushion leatherite cover from foam cushions of sofa three seater 2110(L)x 965(D) x 825(H)and supply and fixing new leatherite cushion cover to the existing cushion. The cover of the cushion shall be of best quality leatherite upholstery ( Not less than Rs.300 per meter) as approved by GE complete . All as specified and directed by Engr-In-charge

All as per item No 1.00 here-in -before but CHARPOY GI PIPE,FD-220:-

Taking out existing unserviceable plywood from charpoy, dismantling the unserviceable parts like GI elbow, GI check nuts, GI pipe and tightening the same with new parts (supplied in succeding items in schedule), supply and fixing of plywood 12mm thick 5 ply of size 1.98x0.93mtr BWR Grade ISI confirming to relevant IS with 3 Nos stiffnerand 50mmX5mmX930mm fixing with nut and bolt 6mm dia complete along with painting all as specified and directed by Engineer-in-Charge.

Supply only GI 3 way elbow ISI marked of size 32mm bore weight not less than 400 gms each complete all as specified and directed by Engineer-in-Charge.

Supply only GI check nut 6mm thick weight not less than 35 gms each complete all as specifed and directed by Engineer-in-Charge.

Supply only long rail of charpoys GI pipe long rail made out of 32mm bore GI pipe medium grade confirming to IS : 1239 Part-I of length 1.9 mtrs duly threaded one side upto 25mm long at end and other side to 50 mm long at end complete all as specified and directed by Engineer-in-charge.

Converting long rail into short Rail (Obtain from Ser No 18.04 above) making threads 25mm long both side end complete all as specified and directed by Engineer-in-Charge.

Converting short rail into leg (Obtain from Ser No 18.05 above) making threads 25mm long both side end complete all as specified and directed by Engineer-in-Charge.

Supply only MS Flat 920x40x5 mm duly painted black colour after primer coat complete all as specified and directed.

All as per item No 1. here-in -before but SHOE RACK STEEL FD/E6/MAP/02 R

Welding inlcuding Bar wherever required as directed by Engr-in-charge

Hard rubber shoes standard quality as per drg.

Painting to Steel shoe rack with synthetic enamel paint of existing color after preparation of surfaces.

All as per item No 1.00 here-in -before but LOCKER BED SIDE STEEL ,FD-127(M)/257/1029

Continuous Gas welding as required .

Taking down existing unserviceable hasp and staple from locker steel. Supply and fix in replacement hasp and staple aluminium ISI marked size 75x40x3mm to shutter as shown on drg.

Supply and fixing CP socket in replacement suitable bracket and stappled socket open at one end as approved complete all as specified and directed.

All as per item No 20.02 above but aluminium handle 100mm long ISI marked as approved.

All as per item No 20.02 above but supply and fix in replacement MS butt hinges as per existing size.

All as per item No 20.02 above but hanging rod conduit pipe stainless steel 20mm bore 1.6 mm thick as approved by Engr-in-charge. Length of conduit shall be as per drg.

Material and labour for removing unserviceable shutter and providing new shutter using MS sheet 1.00mm thick as per existing shape of locker steel complete all as specified and directed.

Removing of unserviceable and worn out legs and providing new legs made out of 1.00mm thick MS sheet fabricated to shape as per existing locker steel complete all as specified and directed.

Removing of unserviceable shelves and providing new shelves made out of MS sheet 1.00mm thick with fixing brackets of existing type locker steel complete all as specified and directed.

Scratching of scracheds/dentings to powder coated steel surface with emery paper, applying metel putty wherever required and repair inside/out side with painting duty matched with existing surfaces

Scratching of scracheds/dentings to powder coated steel surface with emery paper, applying metel putty wherever required and repair inside side only with painting duty matched with existing surfaces

Scratching of scracheds/dentings to powder coated steel surface with emery paper, applying metel putty wherever required and repair out side only with painting duty matched with existing surfaces

All as per item No 1.00 here-in -before but TABLE OFFICE CLERK STEEL: FD-84, 381, 1003 & 1004.

Legs of MS Square tube of size 25mmx25mmx760mm of 20 Gauge as per drg.

Removing of unserviceable lock and supplying and fixing new lock 32 to 55 mm size with duplicate keys and necessary screws etc (Lock should be ISI Marked).

Supply and fixing new drawer made out of 1mm thick MS Sheet alongwith PVC recessed handle as approved including taking down old drawer.

Stiffeners as per drg.

Supply and fix suitable PVC shoes of superior quality for legs for table office cleark steel.

Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm exterior MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed.

Replacement of worn out conduct MS 25 mm Sq pipe 16 gauge whrerever required as directed and fixing as shown on drg . (welding points shall be measured and paid separately.

Mig welding of broken joints MS members (Square / tabular) for legs for table .

Carrying out minor repairs like denting & gas welding of broken drawers etc and spray painting with one coats of the green colour synthetic enamel paint to complete (External & enternal ) table etc all completed.

All as per item No 1.00 here-in -before but TABLE OFFICE OFFICER STEEL: FD-84/ 1002/1003.

Legs of MS Square tube of size 25mmx25mmx760mm of 20 Gauge as per drg

Material and labour for removing of unserviceable lock and supplying and fixing new lock 32 to 55mm size with duplicate keys and necessary screws etc (lock should be ISI marked).

Supply and fixing new drawer made out of 1mm thick MS Sheet alongwith PVC recessed handle as approved including taking down old drawer.

Stiffeners as per drg

Supply and fix suitable PVC shoes of superior quality for legs for table office officer steel.

Supply and fix in replacement shutter made out of 1.00mm thick MS sheet made to shape as per drg.

Material and labour for removing of unserviceable lock and supplying and fixing new lock 32 to 55mm size with duplicate keys and necessary screws etc (lock should be ISI marked).

Material and labour for replacement of worn out conduit MS 25mm Sq pipe 16 gauge wherever required as directed and fixing as shown on drg.( Note - welding points shall be measured and paid separetly).

Material and labour for MIG welding of broken joints MS members (square / tubular ) for MS conduit 25 Sq mm square pipe.

Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm exterior MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed.

Material and labour for carrying out minor repairs like denting & gas welding of broken drawers etc and spray painting with one coats of the green colour synthetic enamel paint to complete (External & enternal ) table etc all completed.

All as per item No 1.00 here-in -before but CHAIR VERANDAH:-, FD-,256,359,259

Spot gas welding to broken parts/joints of chairs.

Removing the existing unserviceable cane plastic from the chair and Recanning the chair with plastic cane 3.5mm to 4mm wide, white colour, (MAT Pattern),half round, virgin quality as approved by Engr-in-Charge.

Removing the existing unserviceable cane plastic / newar from the chair verandah and supply and fixing PVC seat 4mm thick in lieu of cane after providing two additional stiffener at centre of seat & back with 25x5 mm flat Iron welded with centre of the frame duly white painted for support of PVC seat. .Due care shall be taken while fixing the PVC seat, The PVC seat shall get approved from BSO before supply.

Best quality new PVC shoes to the legs of chair.

Painting the frame of the chairs by two coats of synthetic enamel white of approved quality.

All as per item No 1.00 here-in -before but CHAIR STEEL TUBULAR WITH ARMS :FD-75(M)

Scratching the entire frame of chair and applying desired coat of synthetic enamel olive green/steel grey paint after preparation of surfaces. Complete all as specified and as directed by Engr-in-Charge.

02 nos of MS flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat. supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with nut bolts and washers and screws to fix two flats placed beneath the seat complete all as specified and all as directed by Engr-in- Charge.

Removing the old unserviceable back from the frame of the chair. Supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with nut bolts and washers.

Second class Hard wood Arm rest as per drg

Hard rubber shoes as per drg

Rubber cap for conduit pipe as per drg

All as per item No 1.00 here-in -before but CHAIR CB SPECIAL WITH ARMS & CUSHION ,FD-75(M) & FD-360

Scratching the entire frame of chair, and applying one coat of synthetic enamel olive green colour after preparation of surfaces. Complete all as specified and as directed by Engr-in-Charge.

Seat of the chair made out of 12mm plywood. The plywood shall be fixed over wooden frame made out of batten of size 40mmx20mm with nail and adhesive. The entire structure shall be covered with 100mm foam cushion and overwhich best quality tapestry cloth shall be fixed as directed by Engr-In –Charge. 02 nos of MS flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat. The seat shall be fixed in between the frame with nut bolts and washers.

Back of the chair made out of 6mm plywood. The plywood shall be fixed over wooden frame made out of batten of size 40mmx20mm with nail and adhesive. The entire structure shall be covered with 50mm foam and over which best quality tapestry cloth shall be fixed as directed by Engr-In –Charge. The seat shall be fixed in between the frame with nut bolts and washers.

Arm of the chair made out of 25mm thick teak wood in the shape of the arm.The arm shall be covered with 50mm foam and over which best quality tapestry cloth shall be fixed as directed by Engr-In –Charge. The arm shall be fixed over the conduit pipe and to be screwed from below.

Hard rubber shoes as per drg

Note:- (a) The amount of Rs 42519.00 against Schedule of Credit on Page No 113 to 115 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance. (b) One Skilled carpenter, One skilled painter and one skilled polisher shall be provided daily in entire contract period for day to day urgent complaint for that attendence will be taken by Eng-in-Charge. Failing for providing the same will be panalized @1000/per day and the same will be recover from the bill of Contractor. Decision of GE will be final and binding.

NAVEEN TRADERS (BID ID -3195055)

Techno India Enterprises (BID ID -3189383)

M/S Parshant Associates (BID ID -3189215)