Remodeling Re-construction of bridge at RD 5640 Barreta Drain on pucca road from village Nangal to Nangal Dhani in Tehsil Ratia Distt. Fatehabad

Amount

Earth work in excavation in foundations, trenches, etc., in all kind of soils, not exceeding 2 meters depth including dressing of bottom and side of trenches, stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonry, in 15 cm layers with compaction, including disposal of all surplus soil, as directed within a lead of 30 meters. HSR item No. 6.6.

Earthwork excavation for filling dully dressed with lead 30mtr. HSR item No. 6.2 (b),(c) 6.3 (i)

First class brick work laid in cement sand mortar 1:3 in foundation and plinth. HSR item No.11.5

Providing & laying in position machine batches and machine mixed design mix M-15 grade cement concrete using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing including admixtures in recommended proportions as IS:9103 to accerlerate retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge in foundation & plinth (Note: Cement content considered in this item is @240kg per cum) (HSR item No. 10.64 and A&C slip No. 32 dated 11.11.2019

Providing & laying in position machine batches and machine mixed design mix M-25 grade cement concrete using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing including admixtures in recommended proportions as IS:9103 to accerlerate retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge in foundation & plinth (Note: Cement content considered in this item is @300kg per cum) (HSR item No. 10.64 and A&C slip No. 30 dated 11.11.2019

Steel Reinforcement TMT Bars Fe-500 EQR/Fe-500 D grade or more for RCC, works, where not including in the complete rate of RCC including straightening, bending, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. and placing in position complete in all respects for all height/depths/storeys/basements etc. . HSR item No.) 18.22 and A&C slip No. 29 dated 25.10.2019

Shuttering for faces of concrete foundation and foundation beam (vertical or battering) HSR item No. 9.13.

Centering & shuttering with for faces of walls, partitions, retaining walls, well staining and the like (vertical or battering) including attached pilasters buttresses etc HSR item No. 9.5

Centering and shuttering for slab culverts upto 3 meters span. HSR item No. 9.18

Filling of expansion joints, with special impervious hot pour, 12 mm wide. HSR item No. 19.17.

Dismantling brick work, tile masonary of Tile lining and Tile Terracing HSR item No. 8.5 (b)

Dismantling reinforced cement concrete with cleaning, straightening and cutting of bars if required (HSR 8.6 (e)

Dismantling of road including soling and wearing coat, screening and stacking of old serviceable material, complete in all respect HSR item No. 24.37

Restoring the road cut, in level with the existing road surface, including preparation of sub grade laying and relaying of soiling and laying and consolidation of wearing coats. HSR item No. 24.38

Rehandling of recently deposit earth (HSR iem No. 6.2 (b) and note-II of HSR chapter No. 6

Supply and carriage of stone boulders as per specification

Filling stone on level H.S.R item No. 23.44

Painting lines, dashes, arrows etc on road air field with road mark paint H.S.R item No. 16.78 (a)

Cement Concrete 1:4:8 with stone aggregate in F&T. HSR item No. 10.38

First class brick work laid in cement sand mortar 1:4 in foundation and plinth HSR item No. 11.4

Dry brick on edge paving and grouted over 50mm thick earth and mud plaster HSR item No. 14.20

Providing lowering, cutting, jointing and testing RCC 1200mm dia pipe class NP3 as per 458-2003 with spigot and socketed joints manufactured with ISI marked Sulphate Resistance cement as per ISI 12330 with rubber rings ISI marked, antitermite as required at site, into trenches for all depths and laying out the same to correct alignment, gradients and level including dressing and trimming and cutting of concrete beds and sides of trenches, if required, jointing with rubber rings in trenches and jointing with 1:1.5 cement sand mortar and with enddowels filled with 1:1.5 cement sand mortar and finishing the joints at an angle of 45 degree with faces of spigot and socket joints curring and finishing the cut surface to uniform finish etc. as fully described in HSR item No. 29.38, 29.44, 29.45 & 29.46 including cartage, loading and uploading completed in all respect. (HSR item No. 29.96 (x) A&C Slip No. 14

Removing hume/RCC pipes 1200mm dia pie NP3 HSR item No. 8.35

Dismantling Dry brick work HSR item No. 8.5 (i)

Providing and placing in horizontal layers filter media for coursed sand screened, cleaned and washed and graded from 3mm to 6mm as per HSR item No. 28.50 (b)

Credit of dismantling brick work material

Credit of steel bars scrap

Credit of RCC pipe 1200mm NP3

Baljit Singh

VIJAY CONTRACTOR

TEJWANT RAI GOVT CONTRACTOR

M/S LAXMI CONSTRUCTION CO.

Baljeet Singh-The tibba dana sher co operative lc society

vijay kansal contractor