Providing cast-in-situ type RCC solid block lane divider Thengaithittu main road and improvements to road cross culvert in Port road, Point care street, Thennan salai road, Puducherry

Earthwork in excavation of foundation of structure as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom,backfilling the excavation earth to the extent required and utilising the remainging earth locally for road work - by mechanical means - depth upto 3m (Ordinary soil)

Scarifying the existing bituminous surfaceto a depth of 50mm and disposal of scarified material within all lifts and lead upto 1000 metres - by mechanical means

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:2:4 (1 cement : 2 fine aggregate : 4 graded stone aggregate 20mm nominal size)

Reinforced cement concrete work in walls (any thickness) , including attached pilasters, buttresses , plinth and sting courses , fillets , columns , pillars , piers , abutments , posts and struts etc. upto floor five level excluding cost of centering , shuttering , finishing and reinforcement - 1:1.5:3 (1 cement : 1.5 fine aggregate : 3 graded stone aggregate 20mm nominal size)

Centering and shuttering including strutting , propping etc and removal of form for - foundations, footings, bases of columns etc for mass concrete

Centering and shuttering including strutting , propping etc and removal of form for - Walls (any thickness ) including attached pilasters , butteresses , plinth and string courses etc

Steel reinforcement for R.C.C.work including straightening , cutting , bending , placing in position and binding all complete above plinth level - Thermo - Mechanically Treated bars Fe - 500D or more

Cement concrete 1:4:8 mix with stone aggregate 40mm nominal size in foundation upto a depth of 1.5 metres below ground level and upto height of 1.5 above ground/bed level

Plain cement concrete m-15 mix with stone aggregates 20mm nominal size mechanically mixed and vibrated in foundation upto a depth of 1.50 metres below ground level and/or 1.50 metres above ground/bed level

Steel reinforcement for R.C.C. works including bending, binding and placing in position - Thermo Mechanical Treated Bars Fe - 415 or more

12mm cement plaster finished with a floating coat of neat cement of mix - 1:4 (1 cement :4 fine aggregate)

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content - with water thinnable cement primer on wall surface having VOC content less than 50 grams / litre

Painting with synthetic enamel paint of approved brand and manufacutre to give an even shade - Two or more coats on new work

Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.- in cement mortar

Supply of Quarry rubbish including stacking to department gauge for premeasurement and spreading required thickness

Supply of UPVC pipes single socketed pipe 110 mm dia- (working pressure 6Kg/ Sq.cm). (The rate is inclusive of GST).

Providing, hosting and fixing precast R.C.C cover slabs for drain (upto plinth levelI of length varying upto 1.80m and varying thickness from 100mm to 200mm including the cost of required centering, shuttering and finishing smooth with neat cement punning on the exposed surface but excoling cost of reinforcement, with 1:1.5:3 ( 1 cement:1.5 coarse sand: 3 graded stone aggregate 20mm nominal size). The rate is inclusive of all taxes.

Fabrication supply and fixing road side reflectors of size 5cm x 30cm in the RCC central median blocks made of corrosion resistant G.I metal sheet of 2mm thick dressing the edges. Grinding and providing 6.5mm bolt holes. The reflectors will be provided with diamond grade reflective sheeting having pressure sensitive adhesives of aggressive tack types aplied by vaccum applicators, made of single or double colour whichever required. The rate includes all the materials, fixing with 6mm thick anchor bolts 2nos using genetor etc., complete.