KMC/LTG/95/WD25/IV/ZII/25-26

Outdoor Lighting Installation, Steel Tubular Pole, M.S. Pipe, G.I. Pipe,Pole CAP etc Supplying of Swaged Steel Tubular pole as per IS 2713, Pt. II, 1980 for following designation and of following dimensions.(Outside dia & thickness are given in Annexture -1)h) 410SP - 24 ; 8.5 Mtr., 158.00 Kg.

S/F arm bracket of 50 mm bore tubular Pipe (M.S.) of 1. 5 m (5') length for fixing on 75/100 mm pole top including S/F 4 mm thick M.S. plate welded with bolts, nuts & clamps, etc. as required with fabrication work

SCHEDULE OF RATES FOR OH LINE INSTALLATION (LT DISTRIBUTION).Erection of Poles.Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CCfoundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work(site including filling up the excavated earth pit with shifted soil and ramming properlyUpto9.0 mtr. Size 0.6x0.6x1.70 mts

SCHEDULE OF RATES FOR EARTHING INSTALLATIONS.Earthing Installation ... with Pipe Electrode.Earthingwith 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (HOT Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:(a)By ISI Medium GI pipe.

Painting of Steel Tubular Pole of lengths and no. of coats of paint, asgiven below with ready mixed paint/primer of(approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. FOR receiving fresh coat of paint.Upto 9.0 mtr. long pole.(i)1st coat of aluminium paint over 1 coat of RO priming

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of(approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. FOR receiving fresh coat of paint.Upto 9.0 mtr. long pole.ii2nd coat of aluminium paint over 1st coat

Erection of Galv. (HOT Dip) Cross arms/ `D... Iron Clamp7).Supplying & Erection of Galv. `D... iron complete with suitable pole clamp 75mmx88mm porcelain shackle insulator & 15 mm dia Galv. bolts & nuts. incl. painting

SCHEDULE OF RATES FOR OVERHEAD LINE INSTALLATION -REPAIR 14. Dismantling steel tubular/Rail/Strut embedded in CC foundation incl. excavation, filling of holes, restoring surface,loading at site and delivering, unloading, sorting, stacking properly at any place as per direction upto a lead of 1.6 km

SCHEDULE OF RATES FOR OVERHEAD LINE INSTALLATION - REPAIR 11. Providing CC (6:3:1) muffing 0.3 mtr dia upto the height of 0.3 mtr. above the ground level around the pole base complete with 3 mm thick neatly finished cement plaster all-round after dismantling the unserviceable muffing if necessary

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection Legrand 6-32 A SP

Outdoor Lighting Installation, Steel Tubular Pole/ M.S Pipe/ G.I. Pipe, Pole CAP etc. Supplying & Fixing of G.I pole cap for suitable size

S/F projected lamp bracket of G.I. pipe (I.T.C.) (Class-C of 40 mrn bore dia and 1.5 m) length with tie rod and "S" type ornamental scrollto be fitted at a point 600 mm from the top of the pole by means of clamps, bolts, nuts ete. as required.

SUPPLYING & DELIVERY OF SINTEX 2 FRP WHITE WATERPROOF TYPE LOOPING CABLE BOX SIZE 300X200X110 MM DEEP, 4 MM THICK , HAVING INSULATION RESISTANCE GREATER THAN 200 MEGA OHM, IP66; COMPRISING OF ONE NO SPMCB, 4 NOS.TERMINAL CONNECTOR HAVING VOLTAGE GRADE OF 1.1 KV, ONE COMPRESSION TYPE BRASS CABL GLAND FOR UPTO 4 CORE 16 SQMM PVC/A CABLE AS PER RATE OBTAINED FROM GEM PORTAL

Fixing only TPN MCBDB in Sheet Steel enclosure (4 to 12 way) on flat iron frame on wall 415V TP/TPN

Supplying Al.conductor PVC insulated and sheathed unarmoredcable(1.1KVgrade, Gloster/Havells/Polycab). 6sqmm x 2core

Laying on Wall / surface with Saddles / clamps.(a)Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (HOT Dip) Wire, making holes etc. as necy. mending good damages and painting

Supplying of 1.1 KV. Grade PVC insulated Conductor of following cables (make: Polycab/ Gloster/Havells/):Size in Sq. mm, No & dia. of wire in mm , No of Core - 10 1/3.55 4

Laying through Underground Trech.(a)Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

SUPPLY AND DELIVERY OF 40 WATT LED STREET LIGHT FITTINGS ANY SUPERIOR MAKE AS PER DIRECTION OF EIC AND AS PER KMC LAST STORE PURCHASE RATE WITH THE SPECIFICATIONMENTIONEDBELOW.I/PVOLTAGE-AC 110-300,IP-66, P.F GREATER EQUAL TO 0.95 , SURGE PROTECTION GREATER EQUAL TO 4KV, CCT-COOL(6500K),THD LESS THAN 10%

SUPPLY AND DELIVERY OF 200 WATT LED FLOOD LIGHT FITTINGS ANY SUPERIOR MAKE AS PER DIRECTION OF EIC AND AS PER KMC LAST STORE PURCHASE RATE WITH THE SPECIFICATION MENTIONED BELOW. I/P VOLTAGE-AC 110-300 IP-66, P.F GREATER EQUAL TO 0.95 , SURGE PROTECTION GREATER EQUAL TO 4KV, CCT-COOL(6500K),THD LESS THAN 10%

Fixing only Floodlight fittings on top of masonary structure by 3 Nos. 10 mm dia x 87 mm long rag bolts, nuts & double washers complete either 37 mm x 10 mm MS flat support/or by other means as required

Estimated amount

Add: 9%SGST

Add: 9%CGST