Loading
Loading…
Loading…
Tender Value
₹45.3 Cr
EMD Value
₹90.7 L
Closing Date
12 Jun 2026, 3:00 pmClosed
Yes (up to 3 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
ELECTRICAL
21 conditions · 8 needing a document upload
Financial Eligibility Criteria: The Tenderer shall be eligible only if he fulfils the following Standard Financial Eligibility Criteria FOR WORKS COSTING ABOVE Rs.50.00 LAKHS: The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where, V=Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ Audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. Client certificate from other than Govt Organization should be duly supported by Form 16A/26AS generated through TRACES of Income Tax Department of India. No Technical and Financial credentials are required for tenders having value up to Rs. 50 lakhs. For tenders costing more than Rs. 20 crore, eligibility criteria include bid capacity also as specified in Clause 10.3 of IRSGCC April 2022-PART-I, "Regulations for Tenders and Contracts - For the Guidance of Engineers & Contractors for Works Contracts." The tender/technical bid will be evaluated based on bid capacity formula detailed in Proforma 2 of Proforma set. The tenderer will be qualified only if its available bid capacity is equal to or more than the total bid value of he present tender.
In support of Financial Eligibility Criteria: The tenderers shall submit requisite information as per Annexure-VIB, vide para 10.2, Part I of GCC 2022 along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet
FILLING OF RETURNS REGARDING GST : "The tenderers in their bids shall indicate the details of their Jurisdictional Assessing Officers (Designation, address & email ID). In case of a contract award, a copy of the LOA / Purchase order shall be immediately forwarded by Purchaser to the Jurisdictional Assessing Officers mentioned in the Tenderer's bid"
1. The tenderer should have valid electrical contractor license of Super Grade Electrical Contractors License or upto 66 kV and above issued by recognized electrical contractor licensing authority of state Govt./Central Govt.
A) Technical eligibility criteria for non-composite works costing above Rs.50.00 lakhs as per clause 10.1(a) of IRGCC-2022 (part-1): (a)The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: 1.Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, Or 2.Two similar works each costing not less than the amount equal to 40% of advertised value of the tender or 3.One similar work each costing not less than the amount equal to 60% of advertised value of the tender. The technical eligibility for the work as per para 10.1 above, shall be satisfied by either the JV in its own name & style' or 'Lead member of the JV'. Each other (non-lead) member(s) of JV, who is/ are not satisfying the technical eligibility for the work as per para 10.1 above, shall have technical capacity of minimum 10% of the cost of work i.e., each non-lead member of JV member must have Satisfactorily completed or substantially completed during the last 07 (seven) years, ending last day of month previous to the one in which the tender is invited, one similar single work for a minimum of 10% of advertised value of the tender. B) Technical eligibility for composite tender: 1. Each component of value more than 2 Crs shall be taken for evaluation of technical eligibility as per 10.1(b) of IRSGCC-2022. 2.In case single completion certificate containing more than one component is submitted by the tenderer, value of each component is to be specified in that completion certificate. Separate completed works of minimum required values for each component shall also be considered for fulfilment of technical eligibility criteria 3. In case tenderer fails to submit completion certificate with component wise value bifurcation of work for evaluation of technical eligibility, the certificate shall be treated Incomplete and invalid and shall not be considered for evaluation of technical eligibility. The technical eligibility for major component of work as per para 10.1 above, shall be satisfied by either the 'JV in its own name & style' or 'Lead member of the JV' and technical eligibility for other components of work as per para 10.1 above, shall be satisfied by either the 'JV in its own style' or 'any member of the JV'. Each other (non-lead) member(s) of JV, who is/ are not satisfying the technical eligibility for any component of the work as per para 10.1 above, shall have technical capacity of minimum 10% of cost of any component of work mentioned in technical eligibility criteria. i.e., each other (non-lead) member must have satisfactorily completed or substantially completed during the last 07 (Seven) years, ending last day of month previous to the one in which tender is invited, one similar single work for a minimum of 10% of cost of any component of work mentioned in technical eligibility criteria. Note: a) The Major component of work for this purpose shall be the component of work having highest value. In cases where value of two or more component of work is same, any one work can be classified as Major component of work. b) Value of completed work done by a member in an earlier JV shall be reckoned only to the extent of the concerned member's share in that JV for the purpose of satisfying his/her compliance to the above-mentioned technical eligibility criteria in the tender under consideration
A) If the Tenderer proposes to subcontract any component/components as per item 4 above, which is less than 50% of tender value, then a formal agreement duly notarized, legally enforceable in the court of law, shall be executed by the sub-contractor(s) and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility as per clause 7(a)(ii) of Part II of IRSGCC 2022. B) For component less than Rs 2 Cr, technical Eligibility will not be considered in tender evaluation and the documents of sub-contractor need not be submitted along with tender. C) The contractor will engage an eligible sub- contractor after award of contract with the approval of Chief Engineer in writing subject to complying clause 7 of Part II of IRSGCC 2022. Note: a) Tenderers may see Explanation for Para 10 of the Tender Form (Second Sheet) including Para 10.1 to 10.5 - Eligibility Criteria of IRSGCC-2022. b) The Experience Certificates are to be attached to the e-offer as per Proforma - 1.
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs. 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to 2.1.1 issue such certificates. The work executed by the tenderer for any Govt./Govt. bodies/PSUs and public listed company shall only be considered for fulfilling of Technical Eligibility Criteria. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work Experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate
Uploading of Certificate in regard to restrictions on procurement from a bidder of a country which shares a land border with India as per clause 27 of SCC 2022.
Uploading of Certificate in regard to restrictions on procurement from a bidder of a country which shares a land border with India and on subcontracting to contractors from such countries as per clause- 27 of SCC 2022.
Definition of Similar Work :-Design, Supply, Erection, Testing & Commissioning of EHV (voltage exceeding 33 kV)Transmission Line (Overhead conductor and/orUnderground cable) of Central or State Govt Deptt / PSU And/Or Design, Supply, Erection, Testing & Commissioning of EHV (voltage exceeding 33 kV) Sub-Station of Central or State Govt Deptt / PSU And/Or Maintenance / Modification/ Repairing/Dismantling / Replacement and/or stringing of OH conductor / Replacement and/or Earth Wire of EHV (voltage exceeding 33 kV) Transmission Line(Overhead conductor and/or Underground cable) of Central or State Govt Deptt / PSU
109 conditions · 16 needing a document upload
Uploading of Form 16A/26AS generated through TRACES of Income Tax Department of India, if Client certificate is from other than Govt. Organization
Uploading of Certificate in regard to restrictions on procurement from a bidder of a country which shares a land border with India and on sub-contracting to contractors from such countries India .
Uploading of scanned copy of work experience certificate issued by public listed company, copy of work order, bill of quantities, bill wise details of payment received duly certified by charted accountant, TDS certificates for all payments received and copy of final/last bill paid by company etc. as per Note for clause10.1 of IRGCC-April-2022
Uploading of Scanned copy/copies of proof(s) of Technical Eligibility Criteria as per clause 7, Part-II of IRSGCC-2022, in case the main tenderer proposes execution of any of components mentioned in tender through subcontractor in a composite work as specified in clause 10.1 (b)(3) of IRSGCC- April-2022.
Uploading of Certificate in regard to restrictions on procurement from a bidder of a country which shares a land border with India as per clause 27 of SCC 2022.
Uploading a scanned copy of Registration Certificate by Start- up firms issued by appropriate authority and recognized by Department of Industrial Policy and Promotion (DIPP) towards exemption of full Bid security and Registration Certificate with registration number by Labour Co-operative Society issued by appropriate authority for payment of 50% Bid security
Have you attached the digitally signed copy of tender document
Uploading of required documents in case of Individual or propriety firm / concern or partnership firm or company or joint venture firm / HUF / Society / LLP etc., as mentioned in technical compliance (which ever is applicable)
Uploading of Scanned copy of the declaration regarding employment of Retired Engineer / Retired Railway Officer (as per Pro forma - 6 of Proforma set).
Uploading of Proforma (Proforma-9 of Proforma set) attached with Tender Document for self- Certificate in regard to meeting the Minimum Local Content requirements as per Make in India Policy for Procurement Order Value less than of Rs.10 Crores
Uploading of (Proforma-10 of Proforma set) of Certificate on percentage of Local Content as per Make in India Policy for Procurement Order Value more than Rs.10 Crores
Uploading of Scanned copy of Bid capacity (as per Annexure II of Part I, Chapter I of Tender document (Pro forma - 2 of Proforma set)) and in terms of clause 10.3 & 10.5 of IRSGCC- April-2022
Uploading of Scanned copy of Statement of payment received in the Last three financial years and the current financial year (as per Pro forma- 2A) along with copies of relevant supporting documents as stipulated.
Uploading of digitally signed copy of the details of construction machinery, Tools and plants, Vehicles etc. in Proforma 3.
Proforma 5 of Proforma set: Have you submitted Proforma 5 of Proforma set i.e., Bank details in the proforma to facilitate epayment via NEFT/RTGS etc.
Annexure I of Part I, IRSGCC 2022 (Offer Letter): Have you submitted Offer Letter i.e., Annexure I of Part I, IRSGCC 2022 with details of reporting of employment, mobilization advance and LC arrangements if any.
Uploading a scanned copy of the Memorandum of Understanding in the case of a JV firm (Proforma 7 of Proforma set).
Uploading a scanned copy of Standard Format for Certificate Annexure V and V(A) as per IRSGCC-April-2022 and Advance Correction Slip No. 1, 2, 3, 4, 5, 6, 7, 8, 9,10 & 11 to IRSGCC- April- 2022 linked under heading submission of Standard Format for Certificate. This certificate is to be given by each member of JV or Partnership firm/LLP/etc.
In case of Proprietary Firm / Proprietary Concern, the tenderers shall scan and submit with his offer (i)An undertaking that he is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which he was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (ii) All other documents in terms of explanatory notes in clause 10 of IRSGCC-April-2022-Part-I. (iii)All other documents as per Clause 14 of IRSGCC-April- 2022-Part-1
In case of Partnership Firm, the tenderer(s) shall scan and submit with their offer, the following documents: (i)A notarized copy of partnership deed or a copy of partnership deed registered with registar . (ii)A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (iii) An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract (iv)Other documents as mentioned in terms of para 10 tender form (2nd sheet) of IRSGCC April-2022- Part I. (v) All other documents as per Clause 14 and Clause 18 of IRSGCC - April -2022- Part 1. Conditions as per IRSGCC April 2022 & ACS.2 , as amended from time to time is applicable.
In case, the Tenderer is a Company, the tenderer(s) shall scan and submit with their offer, the following documents: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms of explanatory notes in clause 10 of IRSGCC April-2022-Part I. (v) All other documents as per Clause 14 of IRSGCC-April-2022-Part 1.
In case, the Tenderer is a JV Firm, the tenderer(s) shall scan and submit with their offer the following documents: (A) In case one or more of the members of the JV is/are Partnership firm(s): (1) A notarized copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar. (2) A copy of consent of all the partners or individual authorized by partnership firm, to enter into the Joint Venture Agreement on a stamp paper, (3) A notarized or registered copy of Power of Attorney in favour of the individual to sign the MOU/JV Agreement on behalf of the partnership firm and create liability against the firm. (4) An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry/Department of the Govt. of India from participation in tenders/contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were/are partners/members. Any Concealment/wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract. (B) In case one or more members is/are HUF: (1) A copy of notarized affidavit on Stamp Paper declaring that his Concern is a proprietary Concern and he is sole proprietor of the Concern OR he who is signing the affidavit on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (C) In case one or more members of the JV is/are Companies: (1) A copy of resolutions of the Directors of the Company, permitting the company to enter into a JV agreement, (2) A copies of MOA (Memorandum of Association)/AOA (Articles of Association) of the company (3) A copy of Certificate of Incorporation (4) A copy of Authorization/copy of Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender, sign MOU/JV Agreement on behalf of the company and create liability against the company. (D) In case one or more members of the JV is/are LLP firm/s: (1) A copy of LLP Agreement (2) A copy of Certificate of Incorporation of LLP (3) A copy of resolution passed by partners of LLP firm, permitting the Firm to enter into a JV agreement (4) A copy of Authorization/copy of Power of Attorney issued by the LLP firm (backed by resolution passed by the Partners) in favour of the individual, to sign the tender and/or sign the MOU/ JV agreement on behalf of the LLP and create liability against the LLP. (5) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry/Department of the Govt. of India from participation in tenders/contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were/are partners/members. Any concealment/wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (E) In case one or more members of the JV is/are Society/s or Trust/s: (1) A copy of Certificate of Registration (2) A copy of Memorandum of Association of Society/Trust Deed (3) A copy of Rules & Regulations of the Society (4) A copy of Power of Attorney, in favour of the individual to sign the tender documents and create liability against the Society/Trust
In case the Tenderer is HUF, the following documents shall be submitted along with the tender: (i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) An undertaking that the HUF is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which HUF was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (iii)All other documents in terms of explanatory notes in clause 10 of IRSGCC-April-2022. (iv) All other documents as per Clause 14 of IRSGCC-April-2022-Part 1.Conditions as per IRSGCC April 2022 & ACS.2 , as amended from time to time is applicable.
In case tenderer is a LLP Firm registered under LLP Act-2008, the following documents shall be submitted: (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment/wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of explanatory notes in clause 10 of IRSGCC-April-2022-Part-I. (vi) All other documents as per Clause 14 of IRSGCC-April-2022-Part 1.Conditions as per IRSGCC April 2022 & ACS.2 , as amended from time to time is applicable.
In case the Tenderer is a Registered Society & Registered Trust, the following documents shall be submitted: (i) A copy of the Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) All other documents in terms of explanatory notes in clause 10 of IRSGCC-April-2022-Part I. (v) All other documents as per Clause 14 of IRSGCC-April-2022-Part I.
The tenderer whether sole proprietor / a company or a partnership firm / joint venture (JV) / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association/Board resolution, failing which tender shall be summarily rejected.
Proforma-9 of Proforma set for self-Certificate in regard to meeting the Minimum Local Content requirements as per Make in India Policy for Procurement Order Value less than of Rs.10 Crores. (as per clause 23.8(a) of Special Conditions of Contract).
Proforma-10 (Proforma set) of Certificate on percentage of Local Content as per Make in India Policy for Procurement Order Value more than Rs.10 Crores. (as per clause 23.8(b) of Special Conditions of Contract)
Scanned copy of Statement of Bank details, PAN & GST as per Pro forma 5 of Proforma set.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Any other document required for evaluation of his/ their bid as deemed fit by the tenderer.
Uploading of Scanned copy/copies of formal agreement duly executed and notarised by the main tenderer/contractor with the subcontractor for the component(s) of work in a composite work proposed to be executed through subcontractor(s).
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Design, Supply, Construction, Testing and Commissioning of the following works for arranging power supply to an extent of 30MVA (inclusive of connected 5MVA)on EHT basis in favour of Divisional Railway Manager, Traction & Distribution,South Western Railway, Mysusru Division for railway traction s/s at Tholahunase railway station RTSS :(i)1 no. of additional line Terminal Bay's at 220/66kV SRS Davangere Sub-station(ii)66 kV 630Sqmm Single Circuit UG Cable from 220/66kV SRS Davangere S/S to Tholahunase RTSS for a route length of 7.840 km
PROJECT-SWR-TL-THN-30MVA
PROJECT-SWR-TL-THN-30MVA
Open
Works - General
12 Months
Dharwad, Karnataka
₹0
₹90.7 L
12 Jun 2026
20 May 2026
29 May 2026
181 items across 7 schedules · ₹2,14,87,171.53 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply of SF6 Gas circuit breaker with Semi-Pneumatic / Pneumatic operated / Spring type operating mechanism, including mounting Structures arrangements with rigid, bi-metallic terminal connectors complete suitable for Moose ACSR and mounting structures. 72.5KV, 2500A, 40 KA Class SF6 CB With capacitive trip device. For 66kV Line Note:- Terminal connectors for 66kV Breakers shall be suitable for Drake ACSR. | Numbers | 1.00 | 8,29,551.8 | 8,29,551.8 |
| 2 | Supply of Isolators including marshalling box, suitable terminal connectors, as required as per technical specification with solid core cylindrical post insulators. 66KV, 1250A, 40KA Class Double Break Manually operated isolator With terminal connectors suitable for Moose ACSR/63mm Al tube. Upright mounting type with Earth switch. (Live Point Height 4600mm) | Set | 1.00 | 3,28,394 | 3,28,394 |
| 3 | Supply of Isolators including marshalling box, suitable terminal connectors, as required as per technical specification with solid core cylindrical post insulators. 66KV, 1250A, 40KA Class Double Break Manually operated isolator With terminal connectors suitable for Moose ACSR/63mm Al tube.Upright mounting type without Earth switch. (Live Point Height 6350mm) | Set | 2.00 | 3,88,361.6 | 7,76,723.2 |
| 4 | Supply ofIsolators including marshalling box, suitable terminal connectors, as required as per technical specification with solid core cylindrical post insulators. 66KV, 1250A, 40KA Class Double Break Manually operated isolator With terminal connectors suitable for Moose ACSR/63mm Al tube. Upright mounting type without Earth switch. (Live Point Height 4600mm) | Set | 1.00 | 2,75,565.4 | 2,75,565.4 |
| 5 | Supply of Isolators including marshalling box, suitable terminal connectors, as required as per technical specification with solid core cylindrical post insulators. 66KV, 1250A, 40KA Class Double Break Manually operated isolator With terminal connectors suitable for Moose ACSR/63mm Al tube.Underhung mounting type without Earth switch. | Set | 1.00 | 3,08,404.8 | 3,08,404.8 |
| 6 | Supply ofCurrent transformer Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR conductor. 66KV Class, 40KA, CT of ratio 1000-600/1-1-1-1A for Tr. Lines. For metering : Accuracy 0.2S, Burden 10 VA For backup protection : Accuracy 5P20. Burden 30 VA For differential /Distance protection PS class Vk=1200V, Rct. 6 ohm at 1000/1A | Numbers | 2.00 | 1,41,352.2 | 2,82,704.4 |
| 7 | Supply of SURGE ARRESTOR : (Procelain housing) metal oxide, Gapless type with rigid bimetallic connectors suitable for UG Cable & Drake ACSR. 60 kV, 10 KA, SM type-for UG Cable | Numbers | 3.00 | 39,978.4 | 1,19,935.2 |
| 8 | Supply of Control and Relay Panel- Simplex type 220V DC compatible to SCADA complete. 66 kV Panel for Overhead Line - Type 6L (As per Annexure RPP4-SAS) Note: 1.66kV Relay & Protection panels shall be in conformity with Technical specification of Relay & Protection panels with SAS. 2. Differential relay of same make as provided at KPTCL end S/s shall be provided at RTSS end. OFC shall be provided for communication purpose. Relay settings shall be as per recommendations of RT Engineers of KPTCL. 3. Proposed C & R panel shall be provided with control switches for isolators and breakers. The C&R panel shall be provided with annunciator | Numbers | 1.00 | 15,70,580 | 15,70,580 |
| 9 | Supply Tariff Metering Cubicle: Tamper proof tariff metering panel along with main and Check meter as per KPTCL approved drawings & specification ETV Tariff Metering Cubicle | Numbers | 1.00 | 16,44,825.6 | 16,44,825.6 |
| 10 | Supply of Metering Potential Transformer: Voltage Transformer 66 KV,Single Phase, Oil filled outdoor type including Marshalling KIOSK with rigid bimetallic terminal connectors suitable for drake ACSR as per technical specification. Ratio: 66KV/3/110V/3- 110V/3, 0.2 acc, 10VA Burden | Numbers | 2.00 | 1,17,079.6 | 2,34,159.2 |
| 11 | Supply of GI MOUNTING STRUCTURES : Including Bolts & Nuts (Lattice)Isolator Live point height 4600 mm (0.752 MT) | Numbers | 2.00 | 1,24,016.5 | 2,48,033 |
| 12 | Supply of GI MOUNTING STRUCTURES : Including Bolts & Nuts (Lattice)Isolator Live point height 6350 mm (0.924 MT) | Numbers | 2.00 | 1,54,745.22 | 3,09,490.44 |
| 13 | Supply of GI MOUNTING STRUCTURES : Including Bolts & Nuts (Lattice)Current transformer 66 kV (0.152 MT) | Numbers | 2.00 | 25,519.2 | 51,038.4 |
| 14 | Supply of GI MOUNTING STRUCTURES : Including Bolts & Nuts (Lattice)Metering Potential Transformer (0.173 MT) | Numbers | 2.00 | 29,012.12 | 58,024.24 |
| 15 | Supply of GI MOUNTING STRUCTURES : Including Bolts & Nuts (Lattice)Lightening Arrestors (0.147 MT) | Numbers | 2.00 | 24,620.59 | 49,241.18 |
| 16 | Supply of GI MOUNTING STRUCTURES : Including Bolts & Nuts (Lattice)Bus Post insulators (0.14 MT) | Numbers | 2.00 | 23,996.65 | 47,993.3 |
| 17 | Supply of GI MOUNTING STRUCTURES : Including Bolts & Nuts (Lattice)High Post insulators (0.15 MT) | Numbers | 3.00 | 36,598.02 | 1,09,794.06 |
| 18 | Supply of RIGID BUS WITH TAPS & CLAMPS: Aluminium Tube Conforming to 6340WP of IS-5082/1969 (BS1600-Sch.80) of following sizes. a. 100mm Size-66KV Side Note: Quantity indicated is 5% more than the required assessed value & is rounded off to nearest multiple of 6, as it is generally supplied in length of 6M | Metre | 54.00 | 4,135.9 | 2,23,338.6 |
| 19 | Supply of RIGID BUS WITH TAPS & CLAMPS: Aluminium Tube Conforming to 6340WP of IS-5082/1969 (BS1600-Sch.80) of following sizes.b. 63mm Size connecting isolator to vertical tap 66KV Side Note: Quantity indicated is 5% more than the required assessed value & is rounded off to nearest multiple of 6, as it is generally supplied in length of 6M | Metre | 24.00 | 1,418.36 | 34,040.64 |
| 20 | Supply of Straight taps made of 63mm Aluminium Tube (BS-1600) of 1750mm vertical height for vertical portion and cross bus on 66KV side with rounded off end. | Numbers | 4.00 | 4,408.48 | 17,633.92 |
| 21 | Supply of Post Insulator Clamp suitable for 100mm Aluminium pipe and post Insulators Solid Core Type. 66 kV Sidea. Rigid Type | Numbers | 3.00 | 2,742.32 | 8,226.96 |
| 22 | Supply of Post Insulator Clamp suitable for 100mm Aluminium pipe and post Insulators Solid Core Type. 66 kV Sideb. Expansion Type | Numbers | 3.00 | 5,484.64 | 16,453.92 |
| 23 | Supply of Post Insulator Clamp suitable for 63mm Aluminium Pipe and post insulators solid core type. 66 kV Sidea. Rigid Type | Numbers | 2.00 | 2,068.54 | 4,137.08 |
| 24 | Supply of End cap suitable for 50mm Aluminum tube | Numbers | 6.00 | 579.38 | 3,476.28 |
| 25 | Supply of Drake ACSR (66kV side) | Metre | 200.00 | 456.66 | 91,332 |
| 26 | Supply of 1.1 KV, PVC insulated 70 Sqmm Aluminium cable 3 1/2 core with glands/lugs/ferrules for LTAC Panel and outdoor SFDB | Metre | 200.00 | 639.56 | 1,27,912 |
| 27 | Supply of 1.1kV Class PVC insulated Copper Control Cable with Lugs / Ferrules / Glands as per technical specifications.19 C X 2.5 Sq.mm. | Metre | 3300.00 | 619.5 | 20,44,350 |
| 28 | Supply of 1.1kV Class PVC insulated Copper Control Cable with Lugs / Ferrules / Glands as per technical specifications.4 C X 6.0 Sq.mm. | Metre | 1200.00 | 291.46 | 3,49,752 |
| 29 | Supply of 1.1kV Class PVC insulated Copper Control Cable with Lugs / Ferrules / Glands as per technical specifications.4 C X 2.5 Sq.mm. | Metre | 300.00 | 167.56 | 50,268 |
| 30 | Supply of C Type Wedge connector suitable for Drake ACSR to Drake ACSR | Numbers | 8.00 | 2,719.9 | 21,759.2 |
| 31 | Supply of Bolted type tension clamp suitable for Drake ACSR | Numbers | 6.00 | 5,118.84 | 30,713.04 |
| 32 | Supply of Bolted type suspension clamp suitable for Drake ACSR | Numbers | 2.00 | 3,285.12 | 6,570.24 |
| 33 | Supply of 11 kV, 120 kN Disc Insulator a) 66 kV side single tension string: Tension string: string of 6 units | Each | 36.00 | 5,678.16 | 2,04,413.76 |
| 34 | Supply of 11 kV, 90 kN Disc Insulator a) 66 kV side suspension string: string of 6 units | Each | 18.00 | 4,198.44 | 75,571.92 |
| 35 | Supply of AC Distribution Box (Outdoor): AC Distribution box single front type, 6 terminals, 750x1350x300 mm, 1 I/C of 100A, MCCB 20kA + 6 O/G MCB 16A + 1 O/G of 100A, HRC fuse. | Numbers | 1.00 | 85,668 | 85,668 |
| 36 | Supply Multi Function Transducer (MFT) | Numbers | 1.00 | 5,752.5 | 5,752.5 |
| 37 | Supply of 8 Channel 220/110 V Opto Coupler | Numbers | 1.00 | 1,548.16 | 1,548.16 |
| 38 | Supply of Currente cable - Copper core with c/s 4C X 4.0 Sqmm multistrand. | Metre | 100.00 | 208.86 | 20,886 |
| 39 | Supply of Voltage cable - Copper core with c/s 4C X 2.5 Sqmm multistrand. | Metre | 100.00 | 167.56 | 16,756 |
| 40 | Supply of Signal Cable - Armoured Copper core with c/s 10C X 0.5 Sqmm multistrand. | Metre | 500.00 | 168.74 | 84,370 |
| 41 | Supply of Supply of Control cables copper core 10C X 1.5 Sq mm Multistrand, conforming to KPTCL specifications. | Metre | 500.00 | 182.9 | 91,450 |
| 42 | Supply of RJ45 Cable (Price is not available in SR-24. Hence, Market rate is considered) | Metre | 100.00 | 177 | 17,700 |
| 43 | Supply of Digital Input Cable (Price is not available in SR-24. Hence, Market rate is considered) | Metre | 1.00 | 8,260 | 8,260 |
| 44 | Supply of Digital Output Cable (Price is not available in SR-24. Hence, Market rate is considered) | Metre | 1.00 | 8,260 | 8,260 |
| 45 | Supply of Supplying and erection of street lighting lattice type structure along with GI pipe for fixing of LED lamp (0.182 MT + 5% B&N)-8.5 mtr height | Numbers | 2.00 | 32,030.06 | 64,060.12 |
| 46 | Supply of Supply and fixing of LED streetlight luminaire of 200W with pressure die cast aluminium housing body for optimal thermal dissipation.lamp compartment comprising of anti glare clear diffuser with injection mouldrf polycorbonate material, delivering superior light output. | Set | 4.00 | 22,530.92 | 90,123.68 |
| 47 | Supply of Supplying and laying 1.1 kV LT UG cable (2 core 6 Sq.mm) PVC insulated galvanised steel wire / tape armour cable in the existing trench / stone ware / running above the ground level using necessary fixtures with suitable termination with guard. | Metre | 150.00 | 181.72 | 27,258 |
| 48 | Supplying of Annunciator Panel for the following combinations for MCVCB 2I/c + 10F + 1BC Note: As the place is not avilable for the 66 kV C & R Panel, the existing 11 kV Annunciation desk is dismantled & Provision for new Annunciation panel is made. | Numbers | 1.00 | 3,56,950 | 3,56,950 |
| 49 | Supply of Annunciator Panel for the following combinations for MCVCB 2I/c + 14F + 1BC Note: As the place is not avilable for the 66 kV C & R Panel, the existing 11 kV Annunciation desk is dismantled & Provision for new Annunciation panel is made. | Numbers | 1.00 | 4,39,762.4 | 4,39,762.4 |
| 50 | Supply and installation/ Fixing/ Provision of Outdoortype Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shockproof, IP65 (WeatherProof), rustproof, dustproof, waterproof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase / Three Phase Energy Metering suitable baseplate and having a provision for Fuse/ MCBcut-out with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility, Timer, Contactor, 2 Way head frame with diecast LM-6 pulleys, stainless steel axle, Phosphorus Bronze bearing bush press- fitted with separate guides for 2 runs of 5 mm dia, stainless steel wire rope of AISI304 grade7/19-core, Suitable reversible geared motor operating on 230/415V,50Hz,etc., as per techical specification | Each | 1.00 | 75,354 | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCCACS11.pdf
ATTACHMENT
GCC_April-20223.pdf
ATTACHMENT
6.ACS1to10.pdf
ATTACHMENT
8.Proforma.pdf
ATTACHMENT
1.Preamble.docx3.pdf
ATTACHMENT
2.SCCElectrical.docx1.pdf
ATTACHMENT
3.TechSpec.docx1.pdf
ATTACHMENT
4.Payments.docx1.pdf
ATTACHMENT
5.SCC2024.docx1.pdf
ATTACHMENT
civildrawings_1.pdf
ATTACHMENT
ilovepdf_merged95.pdf
ATTACHMENT
Tholahunaserailwaytractionsurveyreport.pdf
ATTACHMENT
ExplanatoryNote-THN.docx1.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].