Civil Repair work and Construction of MS Shed over terrace and Miscellaneous works to existing Depot Building MSBT Balbharati Civil Lines Nagpur

Amount

CONSTRUCTION OF SHED ON TERRACE

Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc.

Dismantling the R.C.C.Work sorting out the materials such as steel etc.as directed and stacking them within the specified lead as directed etc. complete.

Providing and laying in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand.

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:6 including scaffolding, racking out joints and watering etc. in pillar of rectangular shapes as shown in the drawings or as directed complete.

Providing internal cement plaster 20mm. thick in two coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete.

Providing fine cement finish 1.5 mm thick over green plaster surface including scaffolding curing etc. complete.

Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete.

Providing & fixing colour coated Zincalume ( R ) AZ150 ( min 150 gm / sqm total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) ( o.5 mm TCT ), Hi-strenght steel with min 550 MPa yield strength, metallic hot deep coated with Alluminium Zinc Aalloy ( 55% alluminium, 43.4% Zinc, 1.6% Silicon) with colourbond ( R ) steel quality super durable polyster paint coat ( with inoraganic pigment ). The paint shall have a total coating thickness of nominal 35 um, Comprising of nominal 25 um exterior coat on top surface & nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width & nominal 25 - 30 mm deep ribs with subtal square fluting in the five pan at nominal 180 - 250 mm center to center. The end rib shall be design for anti -capillary groove. & return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated Hex head, Self

Providing and fixing valley gutter of 22 B.W.G. (0.8 mm) plain galvanised iron sheets 120 cm wide with teak wood planking 20 mm thick including two coats of coal-tarring the upper surface of plank etc. complete. (excluding painting to underside of plank).

Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.

Civil Repair Work Ground Floor

Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete

Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc..

Dismantling the R.C.C.Work sorting out the materials such as steel etc.as directed and stacking them within the specified lead as directed etc. complete.

Providing second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:4 including scaffolding, racking out joints and watering etc. in pillar of rectangular shapes as shown in the drawings or as directed complete.

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete.

Providing internal cement plaster 20mm. thick in two coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete.

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Providing and applying Two coats of wall care Putty of 2mm thickness for plastered surface and 5-6mm thickness finished concrete surface to Ceiling and Walls to prepare surface even and smooth of Brands BIRLA WHITE, BERGER, BISION, J.K., make, etc omplete. b) For finished concrete walls/ceiling 5 to 6mm

Providing and applying primer coat for internal wall surface and celling including scaffoldin to receive oil bound distemper treatment etc. complete.

Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete.

Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.

Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item No. 15 to 18 prior approval of Superintending Engineer will be necessary

Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.

Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. a) Flooring

Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.

Providing Mirror polishing to Kota Stone including using all necessary stones and equipments cleaning, washing etc. complete. For Flooring

Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.

Providing and erecting 1.2 meter high wire fencing with five rows of barbed wire supported on mild steel angle ( 50 x 50x 6mm) post at 2.5 m c/c including excavation of pits of foundation concrete fixing the posts in ( 1:4:8) cement concrete block of 45x45x45 cm and fastening the Wires and painting the angles with one coat with red lead primer and two coats of oil painting etc.complete

Removing brick bat coba including stacking the spoils as directed with all leads, lifts etc, complete.

Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete.

Providing and fixing 15mm diameter concussion push button type brass/gun metal self-closing tap including necessary socket complete.

Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall

Providing and fixing White glazed with bottle trap earthenware Wash Hand Basin of 55x40 cm size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete.

Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete

Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.

Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc.

Providing and fixing C.P.Two way BIB cock jaquar make or equivalent continental (CAT.NO. CON-041) including necessary sockets/union nut etc. complete.

Providing and fixing C.P. wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange jaquar or equivalent make continental (CAT.NO. CON-273 UPR) including necessary sockets/union nut etc. complete.

Providing and fixing C.P. pillar cock long neck with aerator jaquar or equivalent make continental (CAT.NO. CON -021) including necessary sockets/ union nut etc. complete.

Providing and fixing 15 cm rigid PVC Nahani trap including PVC grating ,bend,connectingpiece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use)

Providing and fixing European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall 10 litre enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 mm dia. UPVC flush pipe with fittings and clamps ,20 mm dia.UPVC overflow pipe ,mosquito proof couplings G.I. chain and pulley,with water Jet and fitting including cutting and making good to the walls and floors testing etc. complete.(prior approval of sample and brand by Ex. Engineer is necessary before use).

Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm With R.C.C. raft in B.C. soil area including cost of reinforcement, 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight 75 mm thick R.C.C. cover medium duty 100 kg etc. complete.

Providing & fixing Stainless Steel sheets of 22 guage suggested by Architract Cladding to Columns as per specification, thickness & instructions given by Architect in charge with necessary hardware, fasteners, Clamping accessories, pattern welding as required complete with the rates including cost of all material, installation charges, labour, scaffolding and cost. of all the necessary accessories, tools, equipment etc., Sample to be got approved from Ex - Engineer before use. Market Rate Analysis RA 56

Civil Repair Work First Floor

Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete

Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc..

Providing second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:4 including scaffolding, racking out joints and watering etc. in pillar of rectangular shapes as shown in the drawings or as directed complete.

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete.

Providing internal cement plaster 20mm. thick in two coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete.

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Providing and applying Two coats of wall care Putty of 2mm thickness for plastered surface and 5-6mm thickness finished concrete surface to Ceiling and Walls to prepare surface even and smooth of Brands BIRLA WHITE, BERGER, BISION, J.K., make, etc omplete. b) For finished concrete walls/ceiling 5 to 6mm

Providing and applying primer coat for internal wall surface and celling including scaffoldin to receive oil bound distemper treatment etc. complete.

Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete.

Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.

Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item No. 15 to 18 prior approval of Superintending Engineer will be necessary

Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.

Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.

Providing Mirror polishing to Kota Stone including using all necessary stones and equipments cleaning, washing etc. complete. For Flooring

Providing Half-round Moulding ( Full Moulding ) to 18 mm to 20 mm thick granite stone including fine polishing and cleaning etc. complete

Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.

Removing brick bat coba including stacking the spoils as directed with all leads, lifts etc, complete.

Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete.

Providing and fixing 15mm diameter concussion push button type brass/gun metal self-closing tap including necessary socket complete.

Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall

Providing and fixing White glazed with bottle trap earthenware Wash Hand Basin of 55x40 cm size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete.

Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete

Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.

Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing C.P. pillar cock long neck with aerator jaquar or equivalent make continental (CAT.NO. CON -021) including necessary sockets/union nut etc. complete.

Providing and fixing 15 cm rigid PVC Nahani trap including PVC grating ,bend,connectingpiece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use)

Providing and fixing European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall 10 litre enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 mm dia. UPVC flush pipe with fittings and clamps ,20 mm dia.UPVC overflow pipe ,mosquito proof couplings G.I. chain and pulley,with water Jet and fitting including cutting and making good to the walls and floors testing etc. complete.(prior approval of sample and brand by Ex. Engineer is necessary before use).

Providing and fixing in position extruded aluminium partitions having frame made out of extruded tubular section of size 65 mm x 40 mm with 12 mm thick three layered flat pressed teak wood particle board bonded with BWP type exterior grade phenol formaldehyde synthetic resin conforming to IS 129231990, laminated on both sides, Novateak or equivalent with aluminium glazing clips of size 12 mm x 12 mm (conical) as per drawing etc. complete.

Construction of Shed backside

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.)

Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.)

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Filling in plinth and floors with approved excavated material in 15cm to 20cm layers including watering and compacting etc. complete.

Providing and laying in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing and laying Cast in situ/Ready Mix cement concrete M- 20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing and laying Cast in situ/Ready Mix cement concrete M- 20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete.

Providing & fixing colour coated Zincalume ( R ) AZ150 ( min 150 gm / sqm total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) ( o.5 mm TCT ), Hi-strenght steel with min 550 MPa yield strength, metallic hot deep coated with Alluminium Zinc Aalloy ( 55% alluminium, 43.4% Zinc, 1.6% Silicon) with colourbond ( R ) steel quality super durable polyster paint coat ( with inoraganic pigment ). The paint shall have a total coating thickness of nominal 35 um, Comprising of nominal 25 um exterior coat on top surface & nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width & nominal 25 - 30 mm deep ribs with subtal square fluting in the five pan at nominal 180 - 250 mm center to center. The end rib shall be design for anti -capillary groove. & return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated Hex head, Self

Providing & fixing in position TMT /HYSD steel bars reinforcement of various diameters for R.C.C. pile caps, footing, foundation, slabs beams & columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches etc as per detailed design & drawing & schedule including cutting , bending hooking the bars, binding with wires ur tack welding & supporting as required complete

Raising Height of Porch

Providing & fixing in position TMT / HYSD steel bars reinforcement of various diameters for R.C.C. pile caps, footing, foundations, slabs, beams & columns, canopies, staircases, newels, chajjas, lintels, Pardies, coping, fins, arches etc. as per detailed design & drawing & schedule including cutting, bending, hooking the bars, binding with wires or tack welding & supporting as required complete.

Providing and fixing in position mild steel dowel bars with anticorresive epoxy paint of 32 mm. dia. 60 cm.Long and at 30 cm. C/C & wherever directed including handling straightening,necessay cutting supported by HYSD chairs with proper aligment by using properly designed assembly of Bulkheads lubricating half lenth with bituminious paint as directed etc. complete.

Cutting transverse contraction joint 3 to 4 mm wide and depth 60mm in concrete slab using concrete cutting, machine with diamond studded saw within 48 hours of casting of bay/slab etc. complete including subsequent widering of the groove 8 to 10 mm. wide at top having depth of 15 mm as directed by Engineer-incharge.

Providing to contraction joints polysuphide sealent (Pouring grade) confirming to BS: 5212- 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter (approx. 25% larger than the initial 3 mm to 4 mm joint) overlaid with bond breaking tape as per detailed drawing, Item includess cleaning the joints with water jet/ air compresssor & allowing joint with water jet /air compresssor & allowing joint to become thoroghtly dry before slealent is applied and applying primer, (A) contranction & longitudinal joints (15 mm. deep x 8 mm. wide).

Providing laying and fixing separation membrance of impermeable plastic sheeting 125 midron thick between the concrete slab and DLC layer, including sticking the membrance to the lower layer by adhesive or appropriate tape or concrete nails with washer, the membrance shall be laid without creases with a minimum overlap of 300 mm.,wherever necessary including labour,replacing damaged sheeting etc. complete.

Providing and laying in situ cement concrete of required M30 grade of trap /granite /quartzite/gneiss metal for cement concrete pavement including mixing in mixer ramming,plywood/steel centering , curing,applying oil on both side of centering, compaction by vibrating using plate,needle and screen vibrator as required brooming cocrete surface to get serration levelling the surface to the camber as directed and curing etc. complete including use of plastisizer as directed by engineer- charge ( Excluding cost of reinforcement ). Newly laid concrete shall be covered by gunny bag,plastic,tarpaulin etc.( Wooden centering / formwork will not be allowed )as per specification given and directed by Engineer-in-charge. Item include cement vata in C.M 1:8 at 0.60 m. x 0.60 m. c/c admeasuring 80 mm at bottom and 40 mm. at top and depth of 75 mm. and maintaining the same thoughout 28 days curing period and removing the same thereafter by using light tools without damaging pavement as directed by Engineer-in-charge ( including initial lead of 5 km. By using Non Tilting Mixer & Weight batcher of approved quality.

Renovation of Toilet Block for outside Drivers

Providing water proof bedding for flooring of Bath & WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including levelling, curing & covering 10 years guarantee on court fee stamp paper of Rs. 500/- including ponding test etc. complete.

Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C. flusing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia P.V.C. flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connection up to the outside face of the wall.

Providing and fixing white glazed with bottle tap earthenware Wash Hand Basin of 55x40 cm size including cold wate4r piller traps, brackets, rubber plugs abd brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste piope and trap upto the outside face of the wall, making good the damasged surface, testing etc, complete. (Brand - HINDWARE/ JOHSON/ PARRYWARE/ VIENA/ AMERICAN STANDARD iv).

Providing & fixing 75 mm dia stabiliser pipe / P.V.C. soil vent / waste pipe & with necessary fixtures & fitting such as bends, tees, Single junctions, slotted vent, clamps etc. complete

Providing & fixing 100 mm dia stabiliser pipe / P.V.C. soil vent / waste pipe & with necessary fixtures & fitting such as bends, tees, Single junctions, slotted vent, clamps etc. complete

Providing & fixing on walls / ceiling / floor 20 mm dia CPVC pipe with necessary fittings, remaking good demolished portion etc. complete.

Providing & fixing on walls / ceiling / floor 25 mm dia CPVC pipe with necessary fittings, remaking good demolished portion etc. complete.

Providing & fixing on walls / ceiling / floor 32 mm dia CPVC pipe with necessary fittings, remaking good demolished portion etc. complete.

Providing & fixing C.P. Two way Bib cock jaquar make or equivalent continental (CAT. NO. CON-041) including necessary sockets/ union nut etc. complete.

Providing and fixing 15 mm. Dia. screw down bib/stop tap of brass including necessary socket union nut testing etc.complete.

Providfing and fixing 15 cm rigid PVC Nahani trap including PVC grating, bend, connecting piece of UPVC pipe up to the outside face of wall, making the good damaged surface and tgesting etc. comple. (Prior approval of sample and brand by Ex. Engineer is necessary before use).

Providing and fixing European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall 10 litre enameled low level flushing cistern with fittings pipe stop brackets for fixing cistern 32 mm dia. UPVC flush pipe with fittings and clamps, 20 mm diaq UPVC overflow pipe, mosquito proof couplings G.I. chain and pulley, with water Jet and fitting including cutting and making good to the walls, and floors testing etc. completge, (prior approval of sample and brand by Ex. Engineer is necessary before use).

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in super structure including striking joints, racking out joints watering and scaffolding complete.

Providing internal cement plaster 20mm thick in a single coat in cement mortar 1:5 without nirru finish to concrete, brick surfaces in all positions including scaffolding and curing. Providing groove at joint of B.B.Masonry and concrete members complete.

Providing & applying two coats of wall care putty of 2 mm thickness for plastered surface

Providing and applying primer coat for wall surface to receive oil bound distemper treatment etc.

Providing and applying plastic emulsion paint of approved quality, colour and shade

Providing and Laying ceramic tiles of approved quality ,required size and 5.5.mm thickness for flooring in required position laid on bed of C.M.1:4 including cement float, filling joint with white / colour cement slurry, cleaning, curing,complete.

Providing and fixing ceramic tiles of approved quality , required size and 5.5.mm thickness for dado and skirting in required position with ready made adhesive mortar of approved quality in required position after making the wall portion in level in plaster of C.M. 1:4 including joint filling with white/colour cement slurry cleaning curing complete.

Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm

Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete.

Providing and fixing single leaf panneled shutter without fanlight & shuteer 35mm thick as per drawing consisting of ghana T.W. top rail of size 100mm x 35mm & bot & lock rail of 200mm x 35mm insert pannel 12mm thick commertial ply faced etc complete.

Miscellaneous Works

Providing & Supplying of HDPE heavy duty platic pallets having load capacity of 1.5 MT of Size 900x900 mm

Providing and fixing False ceiling of 12mm thick Laminated board with frame of M.S.angle 40x40x5mm and Tee of size 40x40x6mm at 60cmc/c including 12mm dia.hangers, T.W.battens 50x25mm and beading 25x15mm thick scaffolding if necessary, all Iron work etc. complete.

Providing & fixing of approved thickness interlocking concrete pavers (Monolithic single layer preacast concrete blocks) of grey cement in red,black,brown or any colour with pigments @ 3% by weight of cement having average crushing strength 50 N/Sqmm placed on uniformly graded river sand sand cushioning of average 25 mm thickness with proper compaction with mechanical compactor in proper line ,level,grade and camber as directed etc complete

Providing and fixing Exterior grade fibrillated fiber reinforced heavy duty cement concrete tiles of approved colour and design, 22 + 2 mm thick,Bayer colour pigmented as per IS:1237-1980 reaffirmed in 2006,having compressive strength more than 500 kg/cm2 like Ultra tiles or equivalent,For flooring in plain/designed pattern on a bed of 1:6 cement mortor including cement float,filling joints with neat cement slurry,curing etc complete.

providing & fixing 900mm high S.S. 304 grade stainless steel railling with 40mm diameter and 1.5mm thick at top , 40mm diameter and 1.5mm thick vertical supports spaced 1.5m c/c and 8mm thick toughened glass including fabricating, fixtures, errecting, neccessary welding, grinding , finishing, busting to stainless steel pipe ..etc complete ……etc complete

Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box CSR P.No. 242, I.No. 39.41, RA 57

Providing & Fixing of Chamber Partition in 12 mm toughned glass to first flour offcie cabin with all fixtures as directed by architect

Providing & Fixing of Vertical Garden with artifical flower tiles & lawn to the front wall of Fire Fighting Pump Room wall.

Desiging, Making & Fixing of Logo of balbharati at Pump House top.

Desiging, Making & Fixing of Mural of size 4'x3'of balbharati at Main Enterance

Supplying & Fixing of Fixing of 12 mm glass on the table top for office

Executive Table @ 2250Lx2100Dx750HT including Low Height Credestal @ 1200Lx450Dx650HT Providing & Fixing of Table @ 2250Lx2100Dx750HT TOP & GABLE END to be made of Membrane finish with soft water fall edges & curved panel & Decorated Anodized section MODESTY PANEL to be made of 18 mm thick Prelaminated particle board with PVC edge band. INCLUDING CREDESTAL @ 1200L X 450D X 650H :- To be made out of Membrane Finish ( 2 Openable Shutter & 3 Drawer Pedestal in between ) as per drawing.

Free Standing Table @ 1200Lx600Dx750HT Providing and fixing Table of Size 1200 x 600 x 750 mm. Top: made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Legs : C Shape made from CRCA Sheet with Powder Coat finish. Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine.KEYBOARD TRAY ( WITHOUT MOUSE TRAY ) :- Metal Powder Coated - Black Color, CPU TROLLEY :- Metal Powder Coated - Black Color, 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board,

Providing & supplying leather up swivel chairs of approved quality & design Furniture RA 5

[ 1 ] Executive Chairs

[ 2 ] Visitor Chair

Providing & supplying Tea table Furniture RA 6

Providing & supplying Curtain as per design & quality approved by engineer etc. comp. with all necerssary fixtures Furniture RA 7

Providing interior and exterior to the door shutter with 6 mm thick approved ply on both side and covering with approved laminate from both side, edges of door shutter to be leaped with 50 mm x 12 mm C.T.W. beading & providing VTC decorative moulding of size 1 1/2" x 1" from both side, finish with Oil Paint / Malamine Polish in two coats and refixing the door shutter with heavy type brass of fixtures, fittings four no of brass hinges, Two nos of Stainless steel handle 200 mm long, one Godrej lock, heavy door closure etc. including finishing the door shutter with approved shade melamine polish in three coat as per instructions and drawing of Engineer

Providing expansion joints in R.C.C. framed structure (exterior column) with plain premoulded filler 25 mm thick with 75 mm wide and 1 mm thick stainless steel plate and finishing etc. complete.

Providing expansion joints in R.C.C. framed structure (at Terrace level) with premoulded filler 25 mm thick with 40 mm wide and 1 mm thick stainlesssteel plate as required, bitumen poured filler and finishing etc. complete as directed.

Providing expansion joints in R.C.C. framed structure (at floor level) with plain premoulded filler 25 mm thick with 75 mm wide and 1 mm thick stainless steel plate and finishing etc. complete.

Providing andlaying in position flooring of telephoneblack/AmbaWhite/Catbarybrown/Rubyred/OceanBrown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar in cluding cement floats striking joints, pointingin C.M.1:3 curing and cleaning etc. complete.

Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destinatin hoisting and fixing of accessories such as inlet,outlet over flow of alltanks capacity above 1000 to 20,000 litres CSR P.No. 268, I.No. 42.54

Drilling of 200 mm dia Bore well ( D T H ) in all sorts of soils, Hardrock removing excavated suff of the soil, Murrum strata 200/215 mm dia in hard rock 150 mm dia with wet (Basic rate 380 and GST 45.60 =

Providing and incerting casing Pipe of 180 mm diameter of 6 kg/cm2 ( IS 4985 - 1988 ) incliding grouting, lowering and Handling etc completed. (Basic rate 755 and GST 90.60 =

Testing of Yeild of water of borewell by Electric pump including electricty, pump and other asembly etc. (Basic rate 3000 and GST 360.00 =

Providing and Fixing PVC cap for 180 mm dia PVC pipe (Basic rate 200 and GST 24.00 =

Cleaning of Drainge & Sewerage Line & Chambers at Civil Lines Balbharati Depot

Supplying & Fixing of Fixing of RubberColumn corner Guard of thickness 8 mm & height of 800 mm for Column edge protection

Providing and fixing tensile structure for Canopy, Two Wheeler/Car Parking of fabric structure covered with tensile fabric membrane including supplying of material, structuraly designed as approved by EIC , The main purlins 75 mm dia (OD) ,minor supporting structure 65 mm dia (OD)only SS components /aluminium SS fittings will be provided. PVDF tensile fabric will be 750 gsm shall be provided. including fixing. The pipes shall be painted with three course including one priming coat with approved quality of paint and colour. The whole structure will be fabricated ,errected with suitable structuraly designed RCC foundation detail drawing with design shall be got it approved by EIC prior to laying of foundation. The rate shall be inclusve of all material required excluding civil structures. PVDF fabrics ,fixing and all components required, cost of labouretc all complete. (15 years on the steel work and up to 10 years on membrane) Location – Two wheeler parking near Canteen.

Electrification Work

Supplying and erecting PVC trunking (PVC casing-n-capping) of size 32 mm with accessories on wall/ceiling as per specification No: WG-MA/CON, para no. 1.1.2

Supplying & erecting mains with 2x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying & erecting mains with 1x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying & erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying & erecting mains with 1x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying & erecting mains with 2x4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying & erecting mains with 2x6 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying & erecting mains 2x1.5 sq.mm.and earth wire 1.5 sq.mm FR PVC copper wire, in rigid PVC conduit min. 20mm dia, as per specification No: WG-MA/PC, para no. 1.4.1

Supplying & erecting mains with 2x2.5 sq.mm.and earth wire 1.5 sq.mm FR PVC copper wire, in rigid PVC conduit min. 20mm dia, as per specification No: WG-MA/PC, para no. 1.4.1

Supplying & erecting mains with 2x4 sq.mm.and earth wire 2.5 sq.mm FR PVC copper wire in rigid PVC conduit min .20mm dia,as per specification No: WG-MA/PC, para no. 1.4.1

Supplying & erecting mains with 2x6 sq.mm.and earth wire 4 sq.mm FR PVC copper wire, in rigid PVC conduit min.20mm dia, as per specification No: WG-MA/PC, para no. 1.4.1

Supplying and erecting split type room Airconditioning unit 1.5 TR 3 star capacity 250V, 50 cycles, A.C. supply having 1 No of air handling unit hiwall / floor mounting type complete with Refrigerent R410 A/R32 and COPPER CONDENSOR at position as per specification no. AP-AC/SAC

Supplying and erecting split type room Airconditioning unit 0.8 TR 3 star capacity 250V, 50 cycles, A.C. supply having 1 No of air handling unit hiwall / floor mounting type complete with Refrigerent R410 A/R32 and COPPER CONDENSOR at position as per specification no. AP-AC/SAC

Lift (Goods Lift 2speed -2000Kg. capacity) Supplying, erecting and commissioning 2000Kg. Goods cum Passenger lift of Ground + two upper floors having rated Speed 0.5M/S Duplex Full Collective System without attendant having M.S. Collapsible Doors, car having MS girds bracing of adequate size, side panels of CRCA, SS Sheet of 18 gauge hairline finish chequered plate flooring with safety tacker 5, floor indicator in car and car position indicator at all landings with electronic microprocessor Control unit, full collective system, over load warning alarm, VVVF drive with suitable - Accessories as per specification of LIFT ( Make : Schindler/ OTIS/Kone/ OMEGA Similar Superior approved ) suitable cabine size & preference to OMEGA make.

Supplying & erecting mains with 2x10 sq.mm.and earth wire 6 sqmm FR PVC copper wire, in rigid PVC conduit min. 25 mm dia, as per specification No: WG-MA/PC, para no. 1.4.1

Supplying and erecting ISI mark Ceiling rose / Batten holder / Slanting holder / hanging cord switch / hanging bell push / pendent holder bakelite base 6A. erected on Filled polypropylene ISI marked (IS:14772-2000) board or polished double wooden block/ ISI mark PVC junction box.

Supplying and erecting modular type switch 6A / 10A ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch 16A ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type bell-push 6A / 10A ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type D.P. switch 32A with indicator ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type electronic step regulator for fan two module ISI mark approved make duly erected on provided plate and box with wiring connections complete. Note: Add Rs 60/- provision of additional two modules for box and double plate

Supplying and erecting modular type blanking plate one module ISI mark approved make duly erected on provided plate & box.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 1 module complete duly erected in an approved manner.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 module duly erected in an approved manner.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 12 module duly erected in an approved manner.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiseling and finishing with cement morter / POP as per required to match the background in an approved manner.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner.

Point wiring for light/fan/bell in 20 mm rigid PVC conduit with 1.5 sq.mm (2+1E) FR grade copper wire,modular type switch, earthing and required accessories as per specification No: WG-PW/SW

Point wiring for light/fan/bell in 20 mm rigid PVC conduit with 1.5 sq.mm (2+1E) FR grade copper wire,modular type switch, earthing and required accessories as per specification No: WG-PW/SW (for fan point)

Wiring for plug on board with modular Switch socket with copper wiring and earthing as per specification No:WG-PW/SW

Wiring for plug on board with Switch socket concealed type and copper wiring, earthing and with modular accessories as per specification No: WG-PW/CW

Point wiring for light/fan/bell /exhaust fan Hybrid type (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n caping with 1.5 sq.mm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW

Point wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FR grade copper wire,modular type switch,earthing and required accessories as per specification No: WG-PW/SW

Point wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FR grade copper wire,modular type switch,earthing and required accessories as per specification No: WG-PW/SW (for fan point)

Concealing provided M.S./ PVC switch box in wall with finishing in an approved manner as per specification No: WG-PW/CW

Refilling the holes for dismantled point wiring with cement mortar & finishing in an approved manner.

Dismantling the existing light, fan, bell, clock, independent plug point, wiring including circuit mains of all types along with accessories etc.complete as per specification No: WG-DM/PW

Supplying & erecting ready to use Retrofit T8 LED 18 / 20 tube light with polycarbonate body, heat sink, integrated HF electronic driver complete & compatible to T8 / T12 LED luminaire by disconnecting starter & ballast if necessary.

Supplying and erecting Ding Dong / electronic musical type call bell with heavy duty coil suitable to operate on 230V A.C. supply erected on polished double wooden block/sunmica block of suitable size

Supplying & erecting decorative pre-wired box type fitting/batten suitable for 4' T8 LED tube light (Excluding tube light).

Supplying and erecting LED square / circular 16 to 20W downlighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete.

Supplying and erecting square / rectangular shaped CRCA /die-cast aluminium powder coated housing LED Panel (slim edge-lit) light suitable for 25 to 32W with provision for plane front frame with translucent cover fixed to the housing complete.

Supplying and erecting street light Wall bracket made from 40 mm.dia ‘B’class G.I. pipe 1.2 m in total length complete as per specification no. FG-BKT/WB

Supplying and erecting LED street light fitting suitable for above 70W- 75 lamp, including lamp, with PF > 0.95 class IP 65 and above Housing of pressure die cast alluminium alloy and heat sink extruded alluminium complete per specification No FG-ODF/FLS2

Supplying and erecting fresh air cum Exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wiremesh, duly erected in an approved manner and marking Sr. No. And date of erection.

Supplying and erecting Five Star Rated Energy Saving Ceiling Fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specifcation no. FG-FN/CF

Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB

Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification No. SW-SWR/MCB

Supplying, erecting & marking DPMCB 40A to 63A, C- series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB

Supplying, erecting & marking TPMCB 40A to 63A in provided distribution board as per specification No. SW-SWR/MCB

Supplying erecting and marking double pole isolator only switch version of miniature circuit breaker (Conforming to IS:8828 of1996) of 40A with required wiring connections and lugs etc. in provided distribution board.

Supplying erecting and marking Four pole isolators only switch version of miniature circuit breakers of 63A in provided distribution board.

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 12 ways, on iron / G.I. frame/wooden board.(Horizontal type) as per specification No. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SP / TP MCBs total 12 ways, on iron/ G.I. frame/wooden board.(Vertical Busbar type) as per specification No. SW-SWR/MCBDB

Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface/flush mounted with 2 ways for incoming and 6 ways for outgoing SP MCB’s on iron/ G.I. frame/wooden board as per specification No. SW-SWR/MCBDB

Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface/flush mounted with 2 ways for incoming and 10 ways for outgoing SP MCB’s on iron/ G.I. frame/wooden board as per specification No. SW-SWR/MCBDB

Supplying & erecting CRCA sheet metal one way enclosures suitable for D.P.M.C.B. /T.P. M.C.B. /F.P M.C.B. complete erected on angle iron/ G.I. frame.

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted suitable for 3 Pole MCCB as Incommer & outgoing SP MCB (12 Poles) or TP MCB of 4 ways (12 Poles) on iron/ G.I. frame. (Vertical Busbar type) as per specification no. SW-SWR/MCBDB1

Providing & erecting 4 Pole MCCB upto 100A, 415V capacity with S.C. rating 25 kA (Ics=100% of Icu), thermal setting with provided leads on iron /G.I. frame as per specification No. SW-SWR/MCCB (NOTE 30%ADD)

Providing & erecting 3 Pole MCCB of 200A,415V capacity with S.C. rating 25 kA (Ics=100% of Icu) thermal and magnetic setting with provided leads on iron /G.I. frame as per specification no. SW-SWR/MCCB

Providing & erecting 4 Pole MCCB of 315/400A, 415V capacity with S.C. rating 36 kA (Ics=100% of Icu), thermal and magnetic setting with provided leads on iron/G.I. frame as per specification No. SW-SWR/MCCB (NOTE 30% ADD)

Supplying and erecting Iron, sheet metal work consisting of CRCA Sheets, Various sections of iron, Plates, Chequered Plates, Rods, Bars, MS pipes, etc. for panel board or any other purposes complete with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority

Supplying and erecting self locking arrangement with duplicate keys, made of brass duly erected, flush with surface of panel/cupboard.

Supplying and erecting Bus bar chamber triple pole with neutral with four aluminium bars, 500V 400A complete as per specification no. CP-BB

Supplying, erecting & terminating PVC armoured cable 2 core 6 sq mm aluminium conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating PVC armoured cable 4 core 16 sq mm aluminium conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating PVC armoured cable 3½ core 25 sq mm aluminium conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating PVC armoured cable 3½ core 35 sq mm aluminium conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating PVC armoured cable 3½ core 50 sq mm aluminium conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating PVC armoured cable 3½ core 70 sq mm aluminium conductor with continuous 8.35 sq mm (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating PVC armoured cable 3½core 400 sq mm aluminium conductor with continuous 12.97 sq mm (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying & erecting G.I. pipe ‘A’ class 40 mm dia. erected for enclosing PVC armoured cable on wall/pole as per specification No. CB-CE

Supplying and laying (including excavation) 77 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying and laying (including excavation) 120 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying & erecting FRP box of size 150mm x 125mm x 100 mm, 2.7 mm thick complete on pole/wall as per specification No. CB-SB

Providing earthing with Copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification No. EA-EP

Providing earthing with Galvanized cast iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification No. EA-EP

Supplying and erecting submersible pump set suitable for erection on open well of required HP with 415 V 50 c/s.A.C. supply, having delivery head from 36 to 18 m and discharge from 400 to 1000 Itrs. per minute (Max efficiency at 29 m head & 680 Itr discharge) & delivery pipe of necessary diameter erected with necessary H type clamps as per specification No. WP-OSP

Supplying and erecting Annealed bare copper wire of high purity of different sizes used for earthing on wall with necessary copper clamps fixed on wall/cable/conduit with screws in an approved manner.

Supplying and erecting flat flexible 3 core 6 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

Supplying and erecting ISI mark G.I.pipe 50 mm dia.‘B’ class at position with accessories. As per specification No. CW-PLB/GP

Supplying and erecting 50mm dia. gun metal sluice valve at position with necessary materials.

Supplying and erecting Non return valve 50mm dia in position made of gun metal.

Supplying and erecting C.I. flange 50mm.dia with necessary nuts bolts and washers with rubber seal in position.

N P Infraprojects Pvt Ltd

Mundhada Construcitons