GE U(N) 33 2022 23 REPAIR MAINTAINANCE OVERHAULING OF CEILING FANS EXHAUST FANS BRACKET WALL FANS AND GEYSERS INCLUDING REWINDING UNDER GE (NORTH) UDHAMPUR

Amount

Taking down carefully ceiling fan of any size by disconnecting the wire and dismantaling blades and transporting the same to contractors work shop for rewinding / painting of the same or depositing to E/M store yard if found beyond repair complete all as specified and directed by Engineer -in -charge. Note: - Parts /components will be measured and paid separately under their respective items.

All as per Srl Item No-1 above here in before but for Exhuast/ wall mounted fan of any size/Make complete all as specified and directed by Engineer -in -charge.

M & L for servising/oiling, greasing and overhauling of ceiling fans of any size/type at site by using appropriate grade of oil/ Grease and replacing deffective parts such as bush, bearing, split pin, rubber bush, hanging clamp, cpacitor including cleaning dust and removing old grease from fan motor bearing and applying new grease including reassembling for fixing the same complete all as specified and directed. Note: (i) Parts /components will be measured and paid separately under their respective items. (ii) Electrician with helper along with T&P and Ladder will be provided by the contractor. (iii) Unserviceable item shall be the property of contractor as schedule of credit

All as per item No. 3 above but for exhaust fan 150 to 450 mm sweep.

M&L Rewinding of motor of AC ceiling fan, of any make/type and size (1200 mm sweep) with super enamelled copper wire of appropriate gauge as existing to obtain the specified and satisfactory RPM as per menufactures specification, including replacement of all insulation materials, varnishing, heating, drying and also including lubricating, reassembling of stater/rotor, connection & testing complete complete all as specified and directed by Engineer -in -charge.

M&L Rewinding of motor of AC ceiling fan, of any make/type and size (1400 mm sweep) with super enamelled copper wire of appropriate gauge as existing to obtain the specified and satisfactory RPM as per menufactures specification, including replacement of all insulation materials, varnishing, heating, drying, also including lubricating ,reassembling of stater/rotor, connection & testing complete all as specified and directed by Engineer -in -charge.

Description all as per item No 6 here-in-before but for exhaust fans of size 150 to 300 mm sweep

Description all as per item No 6 here-in-before but for exhaust fan of size from 380 MM to 450MM sweep

Description all as per item No 6 here-in-before but for wall mounted of 400 mm sweep

M & L for replacement of defective ball bearing for ceiling/table/pedestal/Air-circulators fan of any size complete all as specified and directed by Engineer -in -charge. (Bearing make/size SKF-6201/6202/ or equivalent make of NBC)

Description all as per item No 10 above but for exhaust fan any of sizecomplete all as specified and directed by Engineer -in -charge. /make- SKF 6203/6204 or equivalent make of NBC)

M & L for replacement of defective capacitor of size 2.5 mfd for any type of fans suitable for 250 V including making connectioncomplete all as specified and directed by Engineer -in -charge. (USHA/Havells/Tibcon)

Description all as per item No 12 above but for 0.75/1.7 mfd suitable for PVC /steel exaust fan complete all as specified and directed by Engineer -in -charge.

Description all as per item No 12 above but for 3.15 mfd

Description all as per item No 12 above but for 4.0/5.0 Mfd.

M & L for replacement of rubber real of suitable size for ceiling fan complete all as specified and directed

M & L for replacement of gun metal bush suitable for any type/model/size of fanscomplete all as specified and directed by Engineer -in -charge. Make: As per sample/ Existing.

S&F in repair PVC insulated twin twisted copper conductor cable 1100 V grade of size 24/.20 (0.75 Sqmm) complete all as specified and directed by Engineer -in -charge.

S&F in replacement stepped type electronic fan regulator 60/100 watt flush type on the existing phenolic laminated sheet etc as required all as specified and directed by Engr-in- charge .

Supply and fixing in repair modular electronic fan regulator, step type, 120 watt 230 volt and making all necessary connections complete all as specified and directed.

M & L for painting of ceiling fans any make and size at site with one coat of superior quality synthetic enameled paint of approved make by spraying, filling cavities with filler after preparation of surface all as specified & directed.

Description all as per item No 21 above but exhaust fan of any size 225mm to 380mm sweep with smoke white or grey synathetic enamelled paint of superrior quality complete all as specified and directed by Engineer -in -charge.

Description all as per item No 21 here-in-before but for exhaust fan of size 450 mm sweep ll complete all as specified and directed by Engineer -in -charge.

Description all as per item No 21 but of wall mounted fan of up to 400mm size complete with stand all as specified and diretced

M & L in replacement of MS nut & bolts anealed with two Nos of washer 8/10 mm dia and 40/65 mm long duly half threded and hole for split pin complete all as specified and directed by Engineer -in -charge.

M & L in replacement of PVC canopy suitable for 1200 mm to 1400 mm sweep ceiling fan complete all as specified and directed by Engineer -in -charge.

M & L in replacement PVC connector 4 way 6 Amps with connection screws, nuts complete all as specified and directed by Engineer -in -charge.

M & L in replacement PVC clamps with fixing screws for holding capacitor of any type and size complete all as specified and directed by Engineer -in -charge.

Supply and fixing 'S' type hook made of 12 mm dia MS round bar/MS flat strip 40x4 mm of appropriate size after taking out old rusted wornout hook complete all as specified and directed by Engineer -in -charge.

S&F clamp for down rod of suitable size including gromet/reel type rubber pad with bolts, nuts and washers and split pin suitable for housing ceiling fan complete all as specified and directed by Engineer -in -charge.

Taking out old, broken and rusted louver shutter of any size exhaust fan from wall for necessary replacement complete all as specified and directed by Engineer -in -charge.

Supply and fixing of louver shutter made of GI sheet metal / pressed steel sheet 1.2 mm thick for round base and 0.8 mm thick for flaps, comprising of mounting legs frames made of GI /pressed steel flat strips of size 25mm x 3mm includidng heavy duty rust proof passivated bolts of size 50 mm long 8 mm dia to be fixed on wall fater driling, and duly painted by two coat of synthatic enamelled paint (spray painting) over a coat of primer for exhust fan up to 300 mm sweep complete all as specified and directed by Engineer -in -charge.

All as per item No. 32 above but for exhaust fan 380 / 450 mm sweep.

Supply and fixing in replacement of ceiling fan blade set 1200 mm/1400mm sweep for ceiling fan of any make and model aero dyanamically balanced including screws for fixing with fan complete all as specified and directed. MAKE: BAJAJ/USHA/CG/SKN.

Supply and fixing in replacement MS down rod heavy duty 15mm nominal dia 18"long duly painted in matching colour complete all as specified and directed by Engineer -in -charge.

Supply and fixing in replacement MS down rod heavy duty 15mm nominal dia 24"long duly painted in matching colourcomplete all as specified and directed by Engineer -in -charge.

Supply and fixing in replacement MS down rod heavy duty 15mm nominal dia 36"long duly painted in matching colour complete all as specified and directed by Engineer -in -charge.

Supply and fixing in replacement of rigid aluminium fan blade for exhaust of capacity 300/380/450mm including locking nut complete all as specified and directed by Engineer -in -charge.

Supply and fixing 'S' type fan hook suitable for hanging of ceiling fan any type including rubber reel,nuts,bolts,washers and safety pin after taking out old rusted wornout hook complete all as specified and directed by Engineer -in -charge.

Disconnection of electric and water connection and taking down carefully storage type electric water heaters ( Geysers ) of capacity 25/35/50 Ltrs ( any Make/Modal ) from its existing position and Inspection of Geysers for its serivice abilty / un servicie ability complete all as specified and directed by Engineer -in -charge.

M&L for opening, dismantling, brushing and cleaning of storage water tank of any capacity and size , removing all the sludge , scaling and bleaching from the tank and examining of any leakage of water and tightening of nuts, bolts including reassembling and refixing its own location complete including following (a) Check and connect earth continuity to electric water heater. (b) Cheking and adjusting of pressure realease valve (c) Check and Maitenance, setting of theRmostate valve. (d) Visual examination of fusible plug. Note: (i) Spare parts/components of Geysers, shall be measured and paid separately. (ii) Transport cost for carry out Geysers from site of work to workshop & vice versa shall be deemed to be included in unit rate. (iii) Electrician with helper along with T&P and Ladder will be provided by the contractor for repairing & servicing for day to day complaints in PB Enlcve, Ashok Vihar, Old Medical Complex, CHNC and complete OTM Accn under this AOR.

Supply and fixing in replacement heating element of any size and any shape of capacity 1500 watt for electric water heater and making all Electrical connection as per site requirement all as specified and directed. Make:Theata/ venus.

All as per above Item Sl No-42 for electric water heater of capacity 2000 watts.

Supply and fixing in replacement theRmostat 240 Volts AC temperature adjustable suitable for 25 to 50 Ltr electric water heater and making electrical connection all as specified and directed.

Supply and fixing in replacement indicator lamp assy red and green in colour any shape and size suitable for 25 to50 ltr electric water heater all as specified and directed.

Supply and fixing in replacement PVC connection Pipe for Hot and cold connection suitable for working temp of not less than 90 degree Centigrage complete with check nut and washer in both side, Size 450mm long and making connection to out let and inlet of electric water heater of 25 to 50 Ltr capacity all as specified and directed. Make : Valentino

Supply and fixing in replacement PVC connection Pipe for Hot and cold connection suitable for working temp of not less than 90 degree Centigrage complete with check nut and washer in both side, Size 600mm long and making connection to out let and inlet of electric water heater of 25 to 50 Ltr capacity complete all as specified and directed by Engineer -in -charge. Make : Valentino

Supply and fixing in replacement inner shell ( inner tank) made out of stainless steel sheet 20 guage suitable for 25 /35 Ltr electric water heater in existing shape and size complete all as specified and directed.

All as per above Item Sl No-48 do but 50 Ltr Electric water heater.

Supply and fixing in replacement unsv outer body complete with Top and bottom cover, inspection plate of 25/35 Ltr electric water heater duly painted with super enamelled paint two coat over a red oxide steel primer complete all as specified and directed.

All as per above Sl No-50 do but 50 Ltr electric water heater.

Taking down existing glass wool and supply and fix new superior quality glass wool in geysers any capacity i.e 25/50 Ltr electric water heater all as specified and directed.

Supply and fixing in replacement inner base assy Chromium plated brass complete any shape and size with inlet, out let , theRmostate slot, drain plug and clamp or bolts for fixing heating element as existing shape and size complete suitable for 25 Ltr electric water heater.

All as per above item Sl No-53 do but 50 Ltr electric water heater.

Taking down existing unsv copper flexible cable and supply and fix new 3 core copper flexible PVC insulated multistranded cable of size 4 Sqmm including making electrical connection to electric water heater and plug top MAKE: PLAZA/ INDO ASIAN/HAVELLS

Supply and fixing in replacement 15 Amp plug top 3 pin including making electrical connection with existing cable complete MAKE: ANCHOR/ SSK/CRABTREE

Supply and fixing in replacement metal clad top 2 pole and earth 20 Amp including making connection complete all as specified and directed by Engineer -in -charge. MAKE: HAVELLS/LEGRAND/L&T

Supply and fixing in replacement fusible plug(PRV) in 25/35/50 Ltr capacity electric water heater in existing locationcomplete all as specified and directed by Engineer -in -charge.

Supply and fixing in replacement base assy gasket in 25/35/50 ltr capacity electric water heater in any shape and size all as specified and directed.

Taking down of electric water heater of 25/ 35 Ltr capacity of any make from the existing location by own arrangement of the contractor and cleaning entire body with wire brush and removing old paint and making surface smooth for repainting with super enamelled paint over a one coat of red oxide steel primer as per existing colour code and removing unwanted paint from glass and rubber items and refixing its own location complete.

All as per above item Sl No-60 do but 50 Ltr electric water heater.

M & L for replacement of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps "C" Curve 10kA, 240 volt capacity complete all as directed.

Supply and fix in replacement safety valve suitable for 25 Ltrs/50Ltrs capacity Gysers all as specified and directed. Make : Havells/Legrand/GEC.

S&F bib tap cast copper alloy chromium plated with crutch handle screwed down,screwed for Iron pipe or brass ferrule 15 mm bore fixed in repair complete all as specified and directed by Engineer -in -charge.

Supply and fix in replacement Stop valves 15mm dia, cast copper alloy fency type choromium plated screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed by Engineer -in -charge.

Supply and fix in replacement fastner bolt as per site requiRmement where is required all as per specified and as directed by Engr-in- charge.

Supply and fix in replacement non return valve 15mm dia pipe brass made ISI marked ,complete all as specified and directed by Engr-in- charge.

Taking up or down steel tubing 15mm/20mm bore with fitting and for cleaning including refixing /remove from the site all as specified and directed.

Supply and fixing, cutting and threading complete to walls and ceilings or laid in floors and as per site requiRment 15mm bore GI tubing medium grade screwed and socket joint complete with all fittings such as bend socket , tees elbow union berral nipple plug etc on walls and ceiling with necessary GI clamps etc. NOTE- The tenderer in his required tender shell include cost of scaffolding for fixing GI tubing in highrise bldg & multistoried bldg.

Supply and fixing GI nipple double threaded including socket minimum 1" long complete all as specified and directed by Engineer -in -charge.

S&Fswitch socket combination 2 in 1, 3/5 Pin, 5/16 Amp flush type universal complete all as specified and directed by Engineer -in -charge.

M&L in replacement for submain wiring with 2X2.5QMM+1X2.5SQMM Earth Wire single core PVC insulated FRSL sheathed cooper cable connecting to common earth dolly in and including heavy duty PVC Concealed Conduit complete including taking down userviceable submain wiring all as per site requirement and direction by EIC, all accessories complete all as specified and directed by Engineer -in -charge.

M/S BHARAT LIGHT ELECRIC.CO

m/s shanti trading company

ARNABH ASSOCIATES

CITY TOP ELECTRICAL WORKS

G R CONSTRUCTIONS