INTERNAL PERIODICALS AND WELCOME MAINTENANCE INCLUDING MISC BR REPAIR WORK TO COMMON AREA AND STAIRCASES OF MARRIED OFFICERS ACCOMODATION AT MANEKSHAW MARG OFFICERS ENCALVE IN THE AREA OF AGE B/R-I UNDER GE (EAST) DELHI CANTT-10

Amount

Taking down cement plaster from brick or concrete surfaces including raking out joints, hacking for key and scrubbing down with water, complete all as specified and as directed.

Rendering 15mm thick cement plastering in cement mortar 1:6 on fair faces of brick masonry or concrete surface of walls, finished even and smooth without using extra cement, complete all as specified and as directed.

Rendering 5mm thick cement plastering in cement mortar 1:3 on concrete surface of ceilings, finished even and smooth without using extra cement, complete all as specified and as directed.

Taking down cement plaster / duster bed PCC of Column, chajja, Parapets of roof, facia, drops etc and making good with cement plaster 10mm thick in CM 1:3 with PCC 1:2:4, (average thickness of PCC 25mm) as required, brushing neat cement slurry with 3.0kg of cement per sq. metre including necessary form work and scaffolding upto 6 storied height floor including fixing of wire netting where required to match the existing surfaces , complete all as specified and as directed.

Removing existing paint by scrapping with TruCare Wall Sander: L-01/H-01(having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc by skilled labour complete all as specified and as directed

Providing and applying waterproof cement based putty @ 1kg (undiluted) per sq mtr of average thickness 1mm, of Asian paints or its equivalent over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete all as specified and as directed. Step 1 : Mix the putty powder by adding 40-50% water and mix it with Asian Paints Trucare Putty mixer (Trucare Putty mixer with min 1400W power having mixer rod of industrial stell garde 45 with the mixing capacity of min 2.5kg putty per minute). Step 2 : apply the first coat of the prepared mixer with the help of fully automatic airless spray machine of putty application of Asian Paints Trucare Graco Spray Machine (Model: EH 230DI) or equivalent having a DC electric motor of 3.3kW having flow speed of max 6 ltrs per minutes with a maximum pressure 230 bar having maximum tip size 0.041". Step 3 : Allow 6-8 hrs time to dry the putty surface.

Sanding of the putty surface with Asian TruCare Wall Sander: L-01/H-01(having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc by skilled labour complete all as specified.

Providing and applying one coat of acrylic waterbased interior grade primer @ 0.8ltr (undiluted)/10Sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application of Asian Paints Trucare Garco or equivalent having an electric motor of minimum 1HP with a flow speed of minimum 1ltr per minute having a pressure of 3300psi. Allow 6-8hrs to dry the surface for painting of subsequent quotes, complette all as specified and as directed.

Providing and applying two coats of smooth acrylic emulsion with rich matt finish having voc less than 50 grams per ltr complying leed criteria @ 1ltrs (undiluted)/10Sqm diluted with water in 2:1 ratio applied over priming coat with fully automatic airless spray machine of paint application of Asian Paints Trucare Garco or equivalent having an electric motor of minimum 1HP with a flow speed of minimum 1ltr per minute having a pressure of 3300psi. Allow 6-8hrs to dry the surface for painting of subsequent quotes, complete all as specified and as directed.

Preparation of old decorated internal wall/ceiling surface by sand paper of required sizes, filling in wall care putty in existing or created potholes again sand papering to prepare a smooth surface before applying further finishes of OBD/plastic emulsion paint, complete all as specified and all as directed.

Applying two coats of oil bound distemper on wall surfaces with fully automatic airless spray machine of paint application, complete all as specified and as directed.

Applying one coat of Oil Bound distemper on ceiling surface with fully automatic airless spray machine of paint application, complete all as specified and as directed.

Applying one coats of smooth acrylic emulsion with rich matt finish on ceiling surface with fully automatic airless spray machine of paint application, complete all as specified and as directed.

Preparation of old decorated internal wall/ceiling surface by sand paper of required sizes, filling in wall care putty in existing or created potholes again sand papering to prepare a smooth surface and applying two coats of colour wash, complete all as specified and all as directed.

Preparation of old painted wood or wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

Preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

40 mm dia cup boards knobs fixed with nuts, screw and washer of mild steel, bright polished, fixed in repairs, complete all as specified and as directed.

Vitreous china wash down water closet pan pedestal pattern white 'S' or 'P" trap including fixing bolts including plastic seat and cover complete (excluding flushing cistern and flush pipe), fixed in repairs, complete all as specified and as directed.

Plastic water closet seat cover white with flat bottom and cover and mild steel chromium plated hinging device, fixed in repairs, complete all as specified and as directed.

PVC waste pipe 32mm dia suitable for WHB/Sink, fixed in repairs, complete all as specified and as directed.

Wash basin, Vitreous China white flat back of size 550mm x 400mm including cutting for and pinning in ends of brackets or erecting stand but excluding taps, waste, chain and plugs and proclain stopper but including brackets, fixed in repairs, complete all as specified and as directed.

Drapery rod 25mm dia aluminium, powder coated teak wood texture finish 1 mm thick, with end bulbs as reqd, fixing brackets of powder coated mild steel, fixed in repairs, complete all as specified and as directed.

Glass shelve assembly consisting of 5.5mm thick sheet glass shelf,12cm wide with CP brass bracket, guard and railing, 60 cm long, fixed in repairs, complete all as specified and as directed.

CP Health faucet (hand shower) including flexible pipe of 1 m length fixing to 15m dia pipe with brass check nut fixed in repairs, complete all as specified and as directed.

Galvanised mild steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm, and fixed with tinned tacks or galvanised mild steel staples, fixed in repairs, complete all as specified and as directed.

PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections, fixed in repairs, complete all as specified and as directed. ( Make: - Hindware or equivalent in Jaquar/Somany/Cera as approved.)

NOTE:- (Applicable to Srl items 1 to 4 and 17 to 26). For minimum fair wages, EPF and payment to labour employed, refer Sch A Note No-14,15 and Special Condition No 5 & 21.2 of this tender. Contractor must produce all the relevent record such as payment made to labour, EPF etc at the time of payment of RARs/Final bill. No payment will be released to contrator without producing the proper record.

NOTE:- (Applicable to Srl items 5 to 16). As the work will be executed in multistoried high rise buildings, the cost of all necessary T & P, Scaffoldings, Jhulla arrangement etc. is deemed to be included in the quoted rates of the item..

NOTE:- Irrespective of whatever specified elsewhere in tender documents, all the debris/waste materials produced out of above mentioned work shall be removed out of Cantonement land and disposed off at locations notified by the Delhi Cantonment Board for disposal of waste building materials within NCR area, without any extra cost to Department under own arrangement of contractors. The rates quoted by the contractors against the items catered here-in-above in the BOQ are inclusive of said provision.

M/s Shubh Enterprises

M/S VERMA BUILDER

V r traders

A R construction

sunil traders

NAVDURGA BUILDERS

imran construction company