Construction of public library at Ladakh colony Chandigarh (Under Capex)

Earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5m in width or 10sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. a) All kinds of soil.

Dumping stone excluding cost of stones. in Horizontal on level

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : a) 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources)

b) 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size).

Brick work with common burnt clay F.P.S. (nonmodular) bricks of class designation 7.5 in super structure above plinth level up to floorV level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windowscomprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profilesduly reinforced with 1.60 ± 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriatedimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated)casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plasticcaps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixinghardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wallshall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes andsilicon sealant shall be paid separately). Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made. Casement cum fixed panel window having both end single casement panel, middle fixed panels and at top completely fixed ventilator with S.S friction hinges (350 x 19 x 1.9) made of (big series) frame 67 x 60 mm , sash 67 x 80 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 3.00 sqm upto 5.00 sqm).

Providing and fixing of overhead ladakhi cultural gabel/Padma on top of the slab including Steel work in built up tubular round, square or rectangular hollow tubes and painting all complete job.(Ornamental Gabibe)

Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilator sand partition etc.with 6mm thick clear float glass both side having 12 mm air gap including providing EPDM gasket, perforated aluminium spacers, desiccants, silicon sealant (Both primary and secondary sealant)etc. as per specifications, drawings and direction of Engineer-in-charge complete.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C.work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for a) Foundations, footings, bases of columns, etc. for mass concrete

b) Columns, Pillars, Piers, Abutments, Posts and Struts

c) Lintels, beams, plinth beams, girders, bressumers and cantilevers

d) Suspended floors, roofs, landings, balconies and access platform

e) Edges of slabs and breaks in floors and walls Under 20 cm wide

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting,

15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand)

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : Newwork (two or more coats) over and including water thinnable priming coat with cement primer

Cement concrete flooring1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate) finished 40 mm thick with 20 mm nominal size stone aggregate

Carriage of material from source to site by M.T including loading, unloading and complete job. A) Cement & Steel an avg lead 20km

b) Sand and agg an avg lead 10km

Providing and fixing traditionally carved cement concrete block in (Shingstak) over doors and windows including all accessories as per the direction of the Engineer in-charge, complete with 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size including centring and shuttering all complete job.

Painting of local ornamental art over Shingstak, including Scaffolding: Erected for safe and easy access to different levels (up to three floors). this includes all necessary supports, such as small shuttering and propping, where required. artistic Ornamental work :in traditional local design, adding a unique aesthetic touch to the cemented walls, Complete Job.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and laying 60mm thick faciory made cement in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Providing and fixing ISI marked flush door shutters conforming to IS:2202 (PartI) non-decorative type, coreof blockboardconstructionwithframeof 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing wash basin with C.I. brackets, 15mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a)White Vitreous China Wash basin size 550x400mm with a 15mm CP Brass single hole basin mixer

Providingand fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing 3 layer PP-R (Polypropylene Random copolymer) pipes SDR 7.4UV stabilized & anti-microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes testing of joints complete as per direction of Engineer inCharge. (Internal work exposed on wall) a) PN - 16 Pipe, 25mm OD (SDR-7.4)

b) PN - 16 Pipe, 32mm OD (SDR-7.4)

c) PN-16 Pipe, 40 mm OD

Providing and fixing PVC waste pipe of required dia including bends, tee door bend, L bend trap jointed with adhesive material ISI marked like prince, vector or equivalent brand all complete job. a)100mm dia bore

b) 75mm dia bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms.

Providing and fixing brass bib cock of approved quality : 15 mm nominal bore

providing and fixing ball valve (PPR) of approved quality complete 32mm

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI :12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and the base support for tank

Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing dual inverter split A .C with fixture and connection complete job.

Marble work gang saw cut (polished and machine cut) of thickness 18mm for wall lining (veneer work),backing filled with a grout of average 12mm thick in cement mortar1:3 (1cement : 3coarsesand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble. Area of slab upto 0.50 sqm

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. a) 2 x 1.5 Sq.mm + 1 x 1.5 Sq.mm earth wire

b) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

c) 4 X 16 sq. mm + 2 X 6 sq. mm earth wire

d) 2 X 10 sq. mm + 1 X 6 sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. For inverter) a) 1x 1.5 sq. mm

b) 2x 1.5 sq. mm

Supplying and fixing following modular type switch/socket on the existing switch box cover including connections etc. as required. A) 5/6 A switch

b) 3 pin 5/6 A socket outlet

c) 15/16 A switch

d) 6 pin 15/16 A socket outlet

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2No's 3 pin 5/6 amps modular socket outlet and 2No's 5/6 amps modular switch, connection etc. as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 amps & 15/16 amps. modular socket outlet and 15/16 amps modular switch connection etc. as required.

Supplying and fixing following way,triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 Way (4+18) Double Door

8 Way (4+24) Double Door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole 6/16 amp.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm

Supply, installation, testing & commissioning of GI Electrode Earthing with 84mm dia and 3 meter length, with 40mm x 6mm thick the electrode should be hot-dip galvinised. The GI Electrode shall be pre-filled with Cristaline Conductive Materila (CCM). The GI electrode shall be surrounded with BEE MOIST compound to provide maximum contact betwen the electrode and compound should be eco-friendly GI Electrode Earthing should be maintinance free and does not require regular manual addition of water . The earthing pit should be covered with PVC cover.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Change over switch FP 100 Amp

MCCB FP 200 Amp 36 KA

Fabrication, supplying, installation testing and commissioning of following pannel made out of 2mm thick M.S sheet, floor mounted, vermin & dust proof, indoor type with locakable type hinged doors, duly painted with provision for fixing of 1 No. incommer MCCB. Type change over switch including supplying and fixing 1 set of aluminium bus bar, and strip for housing MCBs, 72 nos, MF digital meter and other allied accessories as required. (make as per annexure).

Supplying and fixing of following rating 240/415 volts "C" Series miniature circuit breaker suitable for lighting and other loads of following poles in existing MCB DB complete with connection, testing and commissiong (Above to 32 Amp). a) SPN 63 Amp

b) TPN 63 AMP

Supplying and fixing of 1.1 KV PVC insulated and PVC sheathed XLPE power cable of following sizes on surface/surface cable tray, 0.50 mtr below ground level etc. as required including carriage upto site of work. (Make as per annexure enclosed) 120 sqm 3.5 Core-Armoured

Supplying and fixing of 120watt LED Street light complete with GI pipe bracket duly embeded along the parapet/ wall. Wipro LR02-501-XXX-57-GI or equivalent approved make

Supplying and fixing following luninaries as required 10 watt LED tube light fitting. LL20-111-XXX-65NE3 wipro or equivalent make and model Philips/Crompton Greaves.

20 watt LED tube light fitting. Model/make or equivalent make and model philips/Crompton Greaves.

Supplying and fixing of following electrical items suitable for operating on 240/230Volts AC, 50 Hz supply. including connections etc. as required. Exhaust fan 300 mm size (Heavy duty) CG transair or equivalent approved make

Supplying and fixing LED type down lighter 15watt LD 95-141-XXX-65-G1 wipro or equivalent

Supply, installation, testing and commissioning of LED 2x2 recess mounted fixture that supply installation testing and commissioning delivers at least 3000 lumens and wattage not more than 36 watt. The luminaries shall have a CRCa power coated body and a high efficiency diffuser. WIPRO CRCO10 RO 38HP57GL OR equivalent approved make.

providing supllying, installation, testing and commissioning of wall mounted split type air conditioner of 1.5 ton capacity 5 star rated (BEE approved) inverter type suitable for operation on 230V, 50 HZ single phase AC supply complete with indoor and outdoor units, refrigerant piping, interconneting cable

Supplying, installation, testing and commissioning of ceiling fan 1200mm sweep complete with down rod, blades, canopies, capacitor, double ball bearing motor and necessary hardware.

Add cost of Structural design of building which should be vetted from any reputed NIT/IIT

Please Enable Macros to View BoQ information