ADDITIONAL OR ALTERNATION TO GDCC ROOM AT HQ EAC (U) AF UNDER GE (I) (AF) SHILLONG

Amount

Demolition of cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as directed.

Demolition of Brickwork or stone/ boulder masonry, including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles built in cement mortar complete all as directed by Engineer-in-Charge.

Material and labour for Precast cement concrete block masonry with solid block 1:3:6 type C1 20 mm graded crushed stone aggregates exceeding 10 cm in width and getting in cement mortar 1:4 complete all as specified.

Taking down chowkhats with shutters (without taking off shutters from the frames) & removing from site area n.exc 1.5 Sqm each complete all as directed.

Taking down chowkhats with shutters (without taking off shutters from the frames) & removing from site area exc 1.5 Sqm & n. exc 4.00 sqm each complete all as directed.

Taking down Shutters of any description exceeding 1.0 sqm but not exceeding 2.0 sqm for each leaf all as specified.

Taking down Shutters of any description not exceeding 1.0 sqm for each leaf all as specified.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified.

Material and labour for 15 mm thick rendering in cement mortar 1:4 in two layers (10 mm +5 mm) on external faces of brick wall or concrete surfaces, finished the surfaces even and smooth without using extra cement with using approved Liquid Water Proofing Compound on second layer (5 mm) as per manufacturer instruction complete all as specified and as directed by Engineer-In-Charge. Note: Liquid Water Proofing Compound shall be measured and paid including this item

Material and labour for 7 mm thick joint free premium quality glazed ceramic colour tiles of size 300 mm x 450 mm/ 350 mm x 250 mm as in skirting / dado / vertical surfaces set and jointed and pointed in white or colour cement to match existing surfaces including 10 mm thick rendering in cement mortar 1:3 complete all as specified.

Material and labour 25 mm thick PCC type B0, 1:2:4 using 12.50 mm graded crushed stone aggregates as in levelling coarse of floors including finishing the concrete surface even & fair without using extra cement complete all as specified.

Material and labour for 7 to 8 mm thick joint free premium quality anti skid colour ceramic tiles size of each tiles should be 600 mm x 600 mm as in floors set and jointed and pointed in white or colour cement to match existing surfaces including 20 mm thick screed bed in cement mortar 1:4 complete all as specified.

Material and labour for 7 to 8 mm thick joint free premium quality anti skid colour ceramic tiles size of each tiles should be 400 mm x 400 mm as in floors set and jointed and pointed in white or colour cement to match existing surfaces including 20 mm thick screed bed in cement mortar 1:4 complete all as specified.

Demolition of cement Concrete (reinforced) other than ground floors and pavings complete all as directed.

Material and labour for Reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies deck slabs, and in shelves and the like complete all as specified and directed. Note: Formwork shall be measured and paid including this item but reinforcement shall be measured and paid separately.

Material and labour for Reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in chajjas complete all as specified and directed. Note: Formwork shall be measured and paid including this item but reinforcement shall be measured and paid separately.

Material and labour for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

Material and labour for 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20 mm thick screed bed in cement mortar 1:4, including edge moulding of counters vanities etc. and machine polishing to edge to give high gloss finish etc. including demolition complete all as specified.

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc.Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fix 5.5 mm thick sheet glass, ordinary quality and glazing in square exceeding 0.50 sqm in each pane in aluminium joinery in each pane complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified.

Supply and fix 12 mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as per manufacturer instruction.

Supply and fix 4.00 mm thick sheet glass, ordinary quality and glazing in square not exceeding 0.50 sqm in each pane in aluminium joinery in each pane complete all as specified.

Supply and fix 4.00 mm thick sheet glass, ordinary quality and glazing in square exceeding 0.50 sqm in each pane in aluminium joinery in each pane complete all as specified.

Supply and fix 4.00 mm thick figured glass, ordinary quality and glazing in square not exceeding 0.50 sqm in each pane in aluminium joinery in each pane complete all as specified.

Supply and fix PVC door frame of size 50 mm X 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified.

Supply and fix 30 mm thick factroy made solid panel PVC door shutter (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with neat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuct inside the solvent cement for style and single side pre laminated PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top rails and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded to the style and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification .

Supply and fix Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified.

Supply and fix in repairs Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified.

Supply and fix 100 mm long aluminium anodised barrel tower bolts of extruded section all as specified.

Supply and fix 100 mm long medium weight, cold rolled mild steel, Butt hinges, complete all as specified.

Supply and fix 75 mm long medium weight, cold rolled mild steel, Butt hinges, complete all as specified.

Supply and fix 150 mm long aluminium alloy handles, fabricated type, anodized all as specified.

Supply and fix 100 mm long aluminium alloy handles, fabricated type, anodized all as specified.

Supply and fix 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.

Supply and fix 150 mm long aluminium anodised barrel tower bolts of extruded section all as specified.

Material and labour for prepration new or previously untreated steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Demolition of existing roof padding including roof treatment complete carefully by cutting, chiselling etc cleaning the surfaces by scrapping, booming brushing etc and removing the rubbish from site to a distance exc 50m and n.exc 100m all as directed by the Engineer-in-Charge and M&L for applying roof treatment as under :- (i) Providing 10mm thick (average) rendering in cement mortar 1:3 mixed with WPC as per manufacture's instruction (to be measured and paid including this item) for levelling to a true surface and to receive new roof treatment complete. (ii) Providing coat of bitumen primer @ 0.40 Kg/Sqm complete . (iii) Providing coat of hot blown bitumen of grade 85/25 @ 1.2 Kg/Sqm over primer surfaces alongwith aluminium paint @ 0.11 Kg/Sqm over the APP. (iv) Providing a layer of APP based polymeric membrance of approved manufacturer, 3mm thick reinforced with polyester non wooven fabrix (weighing not less than 150 gm/ Sqm) laid by torch application method, side overlaps shall be minimum 75mm and end laps shall be minimum 100mm and sealing all overlaps and joints as manufacturer's insructions and provided upto a height o 60cm in the parapets and inserted inside the parapets by cutting a groove and finished by membrane flashing complete all as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets all as directed.

Supply and fix 10 mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing.

Supply and fix 5 mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

Supply and fix as in repairs 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified.

Supply and fix 30 mm thick 2nd class hardwood boarding planed both side fixed in shelves; partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work complete all as specified.

Supply and fix as in repairs 12 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified.

Supply and fix as in repairs 100 mm long hasp and staple, of aluminium anodised including bolt to hinge plate and fixed with screws complete all as specified.

Supply and fix as in repairs 30 mm width of flap (when open) continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified.

Material and labour 50 mm thick PCC type C2, 1:3:6 using 40mm graded crushed stone aggregates as in hard standing/plinth protection including finishing the concrete surface even & smooth without using extra cement and laid in alternate bay complete all as specified.

Material and labour 100 mm thick PCC type B2, 1:2:4 using 40mm graded crushed stone aggregates as in path and paving, finished surfaces even and fair complete all as specified.

Material and labour for 15 mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:6 finshed even and smooth without using extra cement complete all as specified.

Material and labour for 5 mm thick rendering in cement mortar 1:3 on fair faces of ceiling surfaces, finished the surfaces even and smooth without using extra cement complete all as specified.

Material and labour for preparation of newly plastered wall surface and applying two coats of oil bound distemper over a coat of alkali resistance primer over a coat of 1 mm thick wall care putty complete all as specified.

Material and labour for preparation of old plastered or unplastered ceiling surfaces including brooming down or steel wire brushing , scrapping down smoke, soot , moulds , moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of oil bound distemper with roller finish complete all as per manufacturer instruction

Material and labour for preparing newly plastered surfaces and applying three coats of white wash on ceiling/soffits of chajjas complete all as specified and directed.

Material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS-15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surfaces.

Material and labour for old painted wooden surfaces of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

Material and labour for preparation of old or previously treated steel surfaces of any description over 10 cm width or girth and applying one finishing coat of synthetic enamel paint complete all as specified.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 15 mm dia

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 20 mm dia

Supplying and laying of 16 mm bore CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified. Note: Quoted rate is deemed to be included for brass elbow, TEE, Male brass threaded adaptor (MTA/MBTA), Female brass threaded adaptor (FTA/FBTA), Tank adeptor, union and shall be measured and paid including this item.

Supplying and laying of 20 mm bore CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified. Note: Quoted rate is deemed to be included for brass elbow, TEE, Male brass threaded adaptor (MTA/MBTA), Female brass threaded adaptor (FTA/FBTA), Tank adeptor, union and shall be measured and paid including this item.

Supply and fix 20 mm bore CPVC ball valve complete all as specified.

Supply and fix as in repairs 10 ltrs capacity PVC valveless syphonic action type, low level flushing cistern, white with inlet, ball valve float and handle including brackets and 32 mm dia PVC low or high density flush pipe complete all as per manufacturer instruction Make Parryware Cat No E8109 / Cera Cat No B1020101/ Johnshon Cat No P2831PW

Supply and fix as in repairs toilet paper holder as per manufacturer instruction. Make:- Jaquar Cat No AKP-35755PS/ Parryware Cat No T6005A1/ Cera Cat No F5006109

Supply and fix as in repairs soap dish, fancy type, fixed to plugs with chromium plated brass screws complete all as specified.

Supply and fix as in repairs 20 mm dia chromium plated tubular towel rail and 600 mm long with brackets, complete all as specified. Make:-Jaquar Cat No ACN-1111SM/ Parryware Cat No T6001A1/ Cera Cat No F5007103

Supply and fix as in repairs Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified.

Supply and fix as in repairs Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as directed for 20 mm bore all as specified.

Supply and fix as in repairs 15 mm dia cast copper alloy chromium plated Angle valves, with wall flange concealed type screwed down for iron pipe of for unions complete all as specified and directed. Make :- Parryware Cat No T3907A1/ Cera Cat No F1016201/ Johnson Cat No T5310C

Supply and fix as in repairs vitreous china wash down water closet pan (pedestal pattern) with seat and cover closed pattern flat bottom, and mild steel chromium plated or aluminised hinging device white colour with 'P' or 'S' trap including connection to drains (or outgoing pipes) and to the flushing pipes, complete all as per manufacturer instruction

Supply and fix as in repairs soft closing plastic water closet seat cover , white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified.

Supply and fix as in repairs Vitreous China wash basin, white, flat back, size 550 mm x 400 mm including 32 mm dia waste fittings and waste pipe including brackets complete all as specified.

Supply and fix as in repairs vitreous china squatting pan of Orrisa pattern size 580 mm x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including 'P' or 'S' trap and lime concrete bedding connection making good to floor all as specified. Make Parryware Cat No C0117* / Cera Cat No COVY S3010104/ Johnshon Cat No P0461PW

Supply and fix as in repair vitreous china bowl urinal flat back, size of 465 x 355 x 265mm, white inluding providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement: fixing automatic flushing cistern with brackets, grating and union for discharge pipe/ waste coupling including drainage pipe (excluding flushing cistern) and urinal spreader complete and making good to floor.

Supply and fix urinal spreader of PTMT any colour for fixing with 15 mm dia pipe.(Minimum weight 60 gms) complete all as specified.

Supply and fix as in repairs vitreous china urinal partition white of size 310 mm x 700 mm complete all as specified.

Supply and fix as in repairs 15 mm bore CP pillar tap,pressmatic with aerator complete as per manufacturer instruction. Make:- Jaquar Cat No PRS-031/ Johnson Cat No T2001C/ Cera Cat No F9020101

Supply and fix as in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm,complete all as specified.

Supply and fix as in repair CP health faucet with tube and wall hook including all fittings as per manufacturer instruction. Make: Parryware Cat No T9961A1/ Jaquar Cat No ALD-579 / Johnson Cat No S0826C

Supply and fix as in repair 15 mm bore quarter turn Bib taps, chromium plated, cast copper alloy, with wall flange concealed type screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified. Make Johshon Cat No T3305C/ Jaquar Cat No FUS-29037/ Marc Cat No MCT-1030

Supply and fix as in repairs Rotational moulded polyethylene water storage overhead tanks (cylindrical vertical with closed top) multi layered 1000 ltr capacity hoisted and fixed in position including 25 mm dia Ball valves (Minimum weight of valve 455 gms) high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe complete all as specified. Make:Sintex/ Astral/ Finolex/ Supreme

Demolition of cement concrete of any description and in any position complete all as specified.

Material and labour for PCC 1:2:4 type B2 using 40 mm graded crushed stone aggregates as in surface channels and drains complete all as specified.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc. complete all as specified.

Supply and fix as in repairs aluminium (die cast body) Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 851 mm to 1000 mm in width and of weight between 61 kg to 80 kg and fixed complete all as specified.

Supply and fix as in repairs 40 mm width of flap (when open) continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified.

Supply and fix as in repairs 4 lever Mortice lock, vertical type, size 100 mm (set of 2 keys) complete all as specified.

Supply and fix as in repairs 20 mm dia decorative curtain rod, with fixing brackets and finials as required etc. complete all as specified.

Supply and fix galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified.

Supply and fix as in repairs 75mm dia PVC (SWR) floor trap, plain with gratings including jointing with solvent cement complete all as specified and directed.

Supply and fix as in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. Note: Quoted rate is deemed to be included for necessary Bend, Junction, branch piece, reducer and any other fittings required for fixing.

Supply and fix as in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. Note: Quoted rate is deemed to be included for necessary Bend, Junction, branch piece, reducer and any other fittings required for fixing.

Supply and fix as in repairs 110 mm dia PVC (SWR) vent cowl complete all as specified and directed.

Taking down carefully aluminium/copper point wiring (light,fan,socket or power) of any type complete, including fixtures and fittings such as switches,ceiling roses,pendants,regulators sockets, light fittings etc. removing materials to stores for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls,floors,ceiling etc.,all as directed

Material and labour for point wiring with 1.50 Sqmm PVC insulated un sheatned multi stranded copper conductor cable (FRLSH) 1100 volts grade two single core conforming to IS-694-1990 and one run of continious earth wire with 1.50 Sqmm PVC insulated unsheatned stranded copper conductor cable (FRLSH) draw in and including heavy duty 20 mm dia PVC conduit (ISI marked) in concealed with all necessary fittings and fixures and switch, socket, regulator, fan point, exhaust fan point etc. including making good disturbed surface with CM (1:4) to match with the existing surface complete all as specified for the following :- Note:- (a) Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. (b) Quoted rates shall be deemed for conduit, cutting chases of wall, making good disturbed wall. (c) The metal flush box with modular cover plates with frame measured and paid separately. Make: Finolex(ISI Marked)/ Polycab(ISI Marked)/ Nicco (ISI Marked)/ Havells (ISI Marked)/ RR Cable(ISI Marked)/ KEI (ISI Marked)

One light/ fan/ exhaust fan/ bell point controlled by one nos, one way switch

All as per Item No 97.00 but One 3 pin socket outlet. 15 amps, independent, with cables 4.00 sq. mm size complete all as specified.

Supply and fix as in repairs Modular type Switch , flush type single pole one way 10 Amps 240V.

Supply and fix as in repairs Modular type Switch , flush type single pole one way 20 Amps 240V.

Supply and fix as in repairs modular socket, 2 in 1, 6 pin 6 Amps and 16 Amps 240 V ,3 module complete all as specified.

Supply and fix modular metal flush box with modular white cover plate with frame , 3 module complete all as specified. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fix modular metal flush box with modular white cover plate with frame , 8 module complete all as specified. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fixing as in replacement LED luminaire 600mm x 600mm square type 34 to 36 watt, 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three flexible copper conductor cases of suitable size complete all as directed. Note:- (a) LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minimum 50000 Hrs. (c) LED light fitting and drivers shall be of same make.

Material and labour for Sub main wiring with PVC insulated unsheathed two run of 4.00 Sq. mm single core multistand copper conductor cable (FRLSH), 1100 volt grade alongwith one run of 4.00 sqmm PVC insulated and unsheathed copper conductor cable (FRLSH) 1100 volt grade, connected to common earth dolly as earth continuity conductor, drawn through 20 mm x 12 mm PVC casing caping complete all as specified and directed. Note: (a) PVC casing 'N' caping including accessories shall be measured measured and paid including the item. (b) 2 Run of line conductor and 1 Run of earth continuity conductor shall be measured as one unit length. (c) Cable requireds for connection to MCBs/DBs shall be deemed to be included in the unit rate.

Supply and fix sheet metal enclosure MCB DB SPN with din rail 08 way 240 V (double door type) with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonry etc. and making good of disturbed surface to match with existing colour of wall complete all as specified. Make: ABB/ Siemens/ Schneider/ Legrand/ Hagger/ L&T/ GE Note: (a) Quoted rates shall be deemed for brick wall / concrete wall cutting and making good as per existing surfaces.

Supply and fix MCB SP 240 volts, 50 Hz capacity 6-32 Amps 'B' curve all as specified. Make: ABB/ Siemens/ Schneider/ Legrand/ Hagger/ L&T/ GE

Supply and fix MCB SPN/ DP 240 volts, 50 Hz capacity 40 Amps 'B' curve all as specified. Make: ABB/ Siemens/ Schneider/ Legrand/ Hagger/ L&T/ GE

S K ENTERPRISE (BID ID -3502795)

M/S BISWA CONSTRUCTION (BID ID -3493947)

M/s J. C. CONSTRUCTION (BID ID -3495881)