COMPLETION OF INCOMPLETE WORK FOR PROVISION OF OTM ACCN FOR OFFICERS AND SAILORS AT NAS CAMPBELL BAY

Amount

GENERAL SUMMARY NOTE: Schedule ‘A’ Part I to IX are prepriced by MES under Ser No. 2.00 to 10.00. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.

Lumpsum price worked out by the contractor for "Building / Structures” as listed in Schedule ‘A’ Part - I, inserted by MES

Lumpsum price worked out by the tenderer for "Internal Water Supply" as listed in Schedule ‘A’ Part-II

Lumpsum price worked out by the tenderer for "Internal Electrification" as listed in Schedule ‘A’ Part-III

Lumpsum price worked out by the tenderer for "Excavation and Earth work including site clearance and Land Development" as listed in Schedule 'A' Part-IV

Lumpsum price worked out by the tenderer for "Sewage Disposal " as listed in Schedule ‘A’ Part-V

Lumpsum price worked out by the tenderer for "Area Drainage" as listed in Schedule ‘A’ Part-VI

Lumpsum price worked out by the tenderer for "FOOT PATH / HARD SANDING" as listed in Schedule ‘A’ Part-VII

Lumpsum price worked out by the tenderer for "RCC CULVERT" as listed in Schedule ‘A’ Part-VIII

Lumpsum price worked out by the tenderer for "COMPOUND WALL & GATE" as listed in Schedule ‘A’ Part-IX

Lumpsum price worked out by the tenderer for "ROADS" as listed in Schedule ‘A’ Part-X

Lumpsum price worked out by the tenderer for "RCC RETAINING WALL" as listed in Schedule ‘A’ Part-XI

Lumpsum price worked out by the tenderer for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-XII

Lumpsum price worked out by the tenderer for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-XIII

Subtotal

NOTE: Schedule ‘A’ Part - XIV is not prepriced by MES and prepriced rate indicated as 0.00 under Col.5 signifies this fact only. Bidder shall insert their rates in Green colour filled under Col-6.

INTERNAL ELECTRIC SUPPLY Supply and Fix Fluorescent tube light fittings 1x14W 230V , Energy efficient T5 fitting batten type complete including housing all pre wired with high efficiency electronic ballast complete fixed to wall/ceiling including, PVC round blocks and connection by flexible PVC cable with stranded copper conductor from ceiling rose to connector of the fitting including T5 lamp complete all as specified.(for toilets) Make : Philips Model No .Vector 14W TCH207 1xTL5-14W or equivalent in Havells,Bajaj,Wipro, Crompton greaves

Supply and fix Decorative ceiling /wall mounted bulk head luminaries with cast aluminium body, heat resistance glass cover and powder coated wire guard along with electronic ballast and CFL lamp 9watt all as directed. ( for Staircase) Make: Bajaj cat no.BJBE 19 or equivalent in Philips/ Wipro/CG / Havells

Supply & Fix surface mounting CFL luminaries ,compact & decorative energy efficient luminaries with anti-glare diffuser & and decorative end caps, including lamp, CFL 1 x 11W 'SU' type, all as specified and directed.(for Mirror light) Make: Havells Cat No. LHFOECF1OZ1W011 or equivalent of Philips / Wipro/CG/Bajaj

Supply & Fix surface mounting CFL down lighter (Open type) luminaries , white powder coated CRCA body with stain bright aluminium reflector, including lamp, type CFL 1 x 10W 'D' type, all as specified and directed.(for Ceiling light) Make: Bajaj Cat No. BJDS 110C WEB or equivalent of Philips/Wipro/ Havells/CG

Supply and Fix 2x28W T5 decorative slim surface mounted mirror optics luminaire with serrated aluminum cross louvers and engieering plastic end caps including lamp 2x28W complete with all connected items all as specified and directed. Make: CG Cat No. T5CS228EB 2X28W T5 or its equivalent of Philips/Wipro/ Havells/CG

Supply and Fix 4x14W T5 surface mounted non category widespread mirror optic luminaire provided with specular finish side reflector and serreted aluminium cross louvers including lamp 4x14W complete with all connected items all as specified and directed. Make: CG Cat No. T5CQS13414EBB 4X14W T5 or its equivalent of Philips/Wipro/ Havells/CG

Supply and fix Sheet steel factory made, powder coated MCB DB with bus bar 200Amps,Neutral link, Earth bar, double door TPN 4 way 415volt all as directed .Make: Standard Cat No.DSDETHODRW04 or equivalent of Havells/Indo Asian/Legrand .

Supply and fix Sheet steel factory made, powder coated MCB DB with bus bar 200Amps,Neutral link, Earth bar, double door SPN 4 way 240 volt . Make: Standard Cat No. DSDESHODRW04 or equivalent of Havells/Indo Asian/Legrand

Supply and fix Sheet steel factory made, powder coated MCB DB with bus bar 200Amps,Neutral link, Earth bar, double door SPN 6 way 240 volt . Make: Standard Cat No. DSDESHODRW06 or equivalent of Havells/Indo Asian/Legrand .

Supply and fix Sheet steel factory made, powder coated MCB DB with bus bar 200Amps,Neutral link, Earth bar, double door SPN 8 way 240 volt . Make: Standard Cat No. DSDESHODRW08 or equivalent of Havells/Indo Asain/Legrand .

Supply and fix Sheet steel factory made, powder coated MCB DB with bus bar 200Amps,Neutral link, Earth bar, double door SPN 12 way 240 volt . Make: Standard Cat No. DSDESHODRW12 or equivalent of Havells/Indo Asain/Legrand .

Supply and fix miniature circuit breaker (MCB,s) of following capacity :-

(a) MCB TPN 415 volts 6 -32Amps

(b) MCB TPN 415 volts 63Amps

(c) MCB SPN 240 volts 6-32Amps

(d) MCB Single pole 240 volts 6-32 Amps

Material and labour for security light fittings suitable for 1x36Watt including FTL lamp 36 Watt and all other accessories aluminium housing with full glass cover etc, prewired with provision of bracket made out of galvanised iron tubing 'light grade' of suitable dia of pipe up to a length of 1.5m bent to shape fixed to wall with mild steel flat iron clamps 40x5mm duly painted and connecting with 1.5 Sqmm three core weather proof PVC cable copper conductor multistranded from terminal point to fitting complete all as specified and directed. Makes : Crompton Greaves Cat No.SFE1514LSB or equivalent in Philips/ Havells/ Wipro

M&L for earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by with 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised earth wire 4mm dia connected by means of bolts, nuts, check nuts and washer of galvanised iron or steel, provision of 15 mm dia GI pipe medium grade for protection of GI earth wire and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type C1 chamber, MS funnel, wire gauge, 50 mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos, 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance n exc 50 mtr, complete all as shown in electrical plate No 3 of schedule Part-I

Note: (i) Cost of GI earth wire and GI protection pipe upto 7.5mtr length shall be deemed to be included in the rate quoted for this item (ii) The unit rate shall also includes for Wire mesh, funnel, excavation,returninng & filling, PCC chamber pit,RCC cover & test point (iii) PCC pit shall be provided at least 500mm away from the earth pit and not just on the earth pit

HOT WATER SUPPLY Supply, install and test electric water heater (Geyser) storage type of capacity 25 lts to work on single phase, 230 volts, 50 Hz supply including provision of bolts, nuts, washers and grouting on walls and making good the disturbed portion to match with the existing surfaces and provision of suitable PVC pipes connection for hot, cold water connections with chromium plated brass checks nuts incoming and out going and one no non return valve complete all as directed (Single offrs Accn - 7 Nos, Offrs Mess - 02 Nos, Sr.Sailors Mess - 02 No, Jr. Sailors Mess - 01No) Make - Havells, Bajaj, Usha, Lexus & Racold

EXTERNAL WATER SUPPLY Design, Supply, Install, Test and Commissioning of electric driven Centrifugal Pump set with bronze impellor, having discharge capacity of 15 Cum per hour(4.0 LPS) at 50 m head, coupled with suitable AC, 3 phase, 415 Volts, 50 Hz induction motor 1500 RPM installed on a suitable foundation and base frame as per manufacturer's recommendations including starter suitable rating and connecting up with suction and delivery lines and provision of suitable pressure gauge on delivery line complete all as specified and directed. Make - KSB/ Kirloskar/ crompton

Design, Supply, Install, Test and Commissioning of electric driven Centrifugal Pump set with bronze impellor, having discharge capacity of 10 Cum per hour (2.75 LPS) at 25 m head, coupled with suitable AC, 3 phase, 415 Volts, 50 Hz induction motor 1500 RPM installed on a suitable foundation and base frame as per manufacturer's recommendations including starter suitable rating and connecting up with suction and delivery lines and provision of suitable pressure gauge on delivery line complete all as specified and directed. Make - KSB/ Kirloskar/ crompton

Design, Supply, Install, Test and Commissioning of IC diesel engin driven Centrifugal Pump set with bronze impellor, having discharge capacity of 10 Cum per hour (2.75 LPS) at 25 m head, coupled with suitable IC diesel engine air cooled, installed on a suitable foundation and base frame as per manufacturer's recommendations including connecting up with suction and delivery lines and provision of suitable pressure gauge on delivery line complete all as specified and directed. Make - KSB/ Kirloskar/ crompton

M&L for Cast Iron Foot Valve 80 mm dia PN 1.0, confirming to IS 4038, complete including flange joints, nuts, bolts, washers and 3 mm rubber gasket etc., complete all as specified and directed Engineer-in-Charge.

M&L for Cast Iron sluice valves 80 mm dia ISI marked class PN 1.0, both ends flanged complete with iron wheel head and brass spindle including flange joints, nuts, bolts, washers and 3mm rubber gasket etc., complete all as specified and directed Engr-in-Charge.

M&L for Cast Iron Non Return Valve 80 mm dia PN 1.0, both ends flanged with by pass arrangement supply including flange joints, nuts, bolts, washers and 3mm rubber gasket etc., complete all as specified and directed Engineer-in-Charge.

M&L for cutting existing steel tubing of size 80mm bore for alterations done in position without taking down.

Screwing existing steel tubing of size 80mm bore for alterations or additions done in position without taking down.

Design Supply, Install, Test and Commissioning of pressure filteration plant of capacity 6000 GPH ( 27240 LPH), size 1800mm dia x 1200 mm height, material code IS 2062 and complete with following accessories: (a) Frontal pipeline of 80mm dia (b)Cast iron butter fly valve of 80mm dia ( c)Filter media ( sand & gravels) (d) Under bed plate system fitted with PV C strainer (e)Coagulation system (f)Pressure gauges, air vent systems, back washing facilities. (g)Chlorination system alongwith 100 ltrs FRP container fitted with gear, motor & agitator etc, all complete Suitable platform with foot stool foundation including drain and pit to accommodate the entire plant (LS) and MISC fittings like TEE bend, sluice valves, MS pipe in required length and quantity including welding charges to connect filter plant with existing raw water line(LS)

Note:- (i) The rate is deemed to be included for testing, commissioning charges incl transportation to worksite. (ii) The detailed design along with technical specifications/ parameters shall be submitted to Engineer-in-charge for approval before supply &installation of the plant.

M&L for masonary valve chamber with 100 mm thick foundation using PCC 1:4:8, type D-2, over 15cm thick hard core, 20cm thick solid block masonary with blocks cast using PCC 1:3:6, type C1, set in cement mortar 1:4, 15mm thick plaster to internal surfaces of walls and external surfaces up to 15cm below ground level and top of floor in cement and sand mortar 1:4, in walls finished even and smooth with out using extra cement , 3.15mm thick MS sheet cover including 50mmX50mmX6mm thick MS angle frame fixed in PCC 1:2:4, type B1 coping with 25mmX6mm flat iron hold fasts, handle, hinges with locking arrangements, applying one coat of red oxide primer and two coats of synthetic enamel paint to all steel surfaces and earth work in any type of soil including disposal of surplus soil to a distance not exceeding 50M complete of following sizes:-

a) 600mm x 600mm x 600mm

b) 900mm x 900mm x 900mm

M&L for Earthing complete with galvanised steel earth plate electrode 60cm X 60cm X 6.3mm thick burried directly in ground ( earth pit not less than 2.25 mtr below ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level, including provision of galvanized earth strip 32x6mm connected by means of bolts, nuts, check nuts and washers of galvanized iron or steel, provision of 40mm dia GI pipe mediam grade for earth wire protection connected from earth plate electrode to main switch board, provision of 20mm dia GI pipe perforated medium grade for watering arrangement and PCC 1:3:6 type C1 chamber, MS funnel, wire mesh, 50mm thick RCC 1:2:4 type B1 for earth pit cover with 6 Nos x8mm dia high strength deformed steel TMT bars on both ways, including necessary exavation in any type of soil, returning, filling in, removal of surplus soil to a distance n.exc.50m, provision of charcoal and salt complete all as shown in electrical plate No.3 of Schedule Part-I 2009 all as specified and directed and testing on completion.

Note: (i) Cost of GI earth strip and GI protection pipe upto 7.5mtr length shall be deemed to be included in the rate quoted for this item (ii) The unit rate shall also includes for wire mesh, funnel,water pipe, excavation,return & filling, PCC chamber pit, RCC cover and test point junction box. (iii) PCC pit shallbe provided at least 500mm away from the earth pit and not just on the earth pit.

M&L for 10 Sqmm, 3 core flat cable with bare bunched copper conductor insulated and sheathed with PVC and voltage grade upto 1100 Volts, laid in cable duct and connected to motor and starter with suitable copper lugs including testing complete all as specified and directed by Engineer-in-Charge.

EXTERNAL ELECTRIFICATION Supplly, install and test of direct cylinder mounted type vaccume chlorinator for gravity feed including all gauges, pump, motor conforming to IS 10553 part - 2 having capacity 1.0 to 1000 gm/hr and provision of all control accessories complete with suitable foundation all as specified and directed.

M&L for Pre-cast RCC pole, M-30 design mix, 9.0m long of cross section 102mm x 172mm at top and 102mm x 279mm at bottom, class-10 including re-inforcement with high strength deformed steel TMT bars and necessary form work and erection in position complete all as specified/ shown on drawing and all as directed by Engineer-in-Charge. Note:- (i) RCC pole 9.0m long shall be provided all as shown on TD drawing No. TD/401 sheet 1/1 dated 11/09/06. (ii) The rate quoted is deemed to include the following provisions also:- (a) Excavation in any type of soil, returning and filling , removal of surplus soil to a distance n. exc 50m (b) Foundation in PCC 1:4:8 type D2 using 40mm graded stone aggregate. (c) Coping in PCC 1:3:6 type C2 using 20mm graded stone aggregate including necessary form work.

S&F LED street light luminaires 1X25W with heat resistant toughened glass & IP65 protection level complete all as directed. Make: Crompton Greaves Cat No. LSTD-25-CD or Equivalent in BAJAJ/WIPRO.

M&L for Post Top lantern light fitting of diamond shaped diffuser and spigot with 1 x 70 HPSV lamp suitable for fixing on 40mm dia pipe complete with all accessories including fixing on gate pillar and testing complete all as specified and directed. Make : Bajaj Cat Ref No. BJDPTI 70 SV/MH LPF or its equivalent in Philips/Crompton Greaves

M&L for street light bracket made out of 25mm dia light grade GI pipe of 1.5m length bent to required shape including fixing on RCC poles with suitable size of clamps, nut & bolts complete all as specified and directed.

M&L for PVC Junction box of size 230x170x105mm for loop in- loop out connections of street lights including one two pole connector and one MCB 240V, SP, 2.5 A complete including fixing on RCC pole all as directed. Make : Hensel / Sintex

M&L for PVC flat twin core copper conductor cable of size 2.5 sqmm for connecting from junction box to street light fitting complete all as specified and directed.

M&L for GI pipe light grade 15mm dia from loop in-loop out box to street light fitting incluiding fixing with suitable size of clamps , nut and bolts on RCC poles complete all as specified and directed. Make: Zenith/ Jindal/ Tata

Supply & Laying of DWC (Double Wall corrugated) HDPE pipe ISI marked of outer dia of 120mm and inner dia 103 mm polythylene with smoooth inernal and profiled external surface for non pressue under ground cable including all connected accessories like socket, coupler, bends tees etc for protection of LT cable complete all as specified. Make: TELEREX (manufactured by Rex polyex extrution Ltd) /GEMINI (manufactured by Tirupati plastomatics (P) Ltd)

Supply & Laying of DWC (Double Wall corrugated) HDPE pipe ISI marked of outer dia of 77 mm and inner dia 63 mm polythylene with smoooth inernal and profiled external surface for non pressue under ground cable including all connected accessories like socket, coupler, bends tees etc for protection of LT cable complete all as specified. Make: TELEREX (manufactured by Rex polyex extrution Ltd) /GEMINI (manufactured by Tirupati plastomatics (P) Ltd)

Supply & Laying of DWC (Double Wall corrugated) HDPE pipe ISI marked of outer dia of 50 mm and inner dia 38 mm polythylene with smoooth inernal and profiled external surface for non pressue under ground cable including all connected accessories like socket, coupler, bends tees etc for protection of LT cable complete all as specified. Make: TELEREX (manufactured by Rex polyex extrution Ltd) /GEMINI (manufactured by Tirupati plastomatics (P) Ltd)

Supply & Laying of DWC (Double Wall corrugated) HDPE pipe ISI marked of outer dia of 40 mm and inner dia 32 mm polythylene with smoooth inernal and profiled external surface for non pressue under ground cable including all connected accessories like socket, coupler, bends tees etc for protection of LT cable complete all as specified. Make: TELEREX (manufactured by Rex polyex extrution Ltd) /GEMINI (manufactured by Tirupati plastomatics (P) Ltd)

AIR CONDITIONING & REFRIGERATION S&F Refrigerator 200 Ltrs capacity AC 230V, 5 Star Rating and connecting to voltage stabilizer including testing and commissioning complete, Make:- LG/Whiripool/Samsung/Videocon

S&F Deep freezer 200 Ltrs capacity of 5 Star rating, AC 230V and connecting to voltage stabilizer including testing and commissioning complete. Make:-Blue star/ Voltas/Usha

Supplying, Fixing, Installing, water cooler Electric (Single Phase) having storage capacity 80 and normal cooling capacity of 40 litres per hour electrical driven including connecting up of water supply lines and all electrical connections complete. Make:-Blue star/ Voltas/Usha

Supply and fix voltage stabilizer for automatic operation normally air cooled indoor type and designed for input variation 170 Volts to 250 Volts with out put stabilizer at 230 Volts with capacity of 1 KVA including testing and commissioning complete all as directed. Makes :- VOLTS / V GUARD/ SYSCOM

Supply and fix voltage stabilizer for automatic operation normally air cooled indoor type and designed for input variation 170 Volts to 250 Volts with output of stabilizer at 230 Volts with capacity of 2 KVA including testing and commissioning complete all as directed. Makes :- VOLTS / V GUARD/ SYSCOM

Supply and fixing ceiling fan 5star rated 1200 mm sweep including down rod and connecting up including provision of 2 core flexible PVC cable with strandard copper conductor of size 1.50 Sq.mm from ceiling rose to connector of ceiling fan Makes :- USHA/CROMPTON/ORIET

S & F Exhaust fan with automatic louvers for protection when not in use, silent operation, rust proof body and blades with fixing arrangements of size 300 MM sweep,1400 rpm.. Makes :- USHA/CROMPTON/ORIET

Subtotal

K UNNIKRISHNA PILLAI

PRASHANTH ERECTOR AND BUILDERS PVT LTD

Kailash Engineering Company

KML CONSTRUCTION

AMR TRADERS