Construction of Brick Lined Canal from ch 0.00m to ch 350.00m _canal outlet 40Nos_ water collecting tank Pump house and operator Quarter Cum WUA office at Malancha Kalubari ELIS under SOPD for the year 2019-20

Amount

Construction of Brick lined main canal from ch 0 m to 350 m

Earth work in excavation of foundation of canal structures in all types of soil as per design and drawing dressing the foundation, shoring, etc. removing the surplus spoils by head load to a safe distance from the working place and depositing required spoils in uniform layers dressing, watering, breaking clods to not more than 10mm cube with compaction complete as directed at site (including bailing out stagnant water where necessary). a. All type of soil except soil mixed with gravel and boulders For normal lead of 30m and lift of 1.50m

Cutting jungles and trees upto 50 cm girth including uprooting roots and stumps and removing them from site of work etc, complete as directed. (ii) Medium jungles

Bamboo clumps including uprooting stumps.

Cutting trees including uprooting and removing where necessary. (iii) 150 cm to 180 cm girth

Demolishing brickwork including stacking of serviceable materials and disposal of unserviceable materials as directed for all levels

Soiling in foundation floor at all levels including filling interstices,ramming etc complete as directed and of specified thickness with 9 cm brick on flat including sand packing.

C. C work in prop 1:4:8 in foundation / abutment / piers / wings wall etc. with hard broken stone aggregate of size 13 mm to 38 mm including curing, bailing out water with necessary timber shuttering, scaffolding etc. where necessary complete as directed (shuttering, scaffolding cost will be paid separately).

1st Class brick work in cement mortar in abutment and wing wall ,parapet wall etc. including racking out joints and curing etc. complete. (A) In proportion 1:4

River Sand filling in layers not more than 150mm thick including carries, watering, ramming, etc. complete as directed.

C.C. work in proportion 1:2:4 in foundation / abutment / piers / wing walls etc. with hard broken stone aggregate of size 6mm to 20 mm including curing bailing out water with necessary timber shuttering, scaffolding etc. where necessary complete as directed ( shutterinfg, scaffolding cost will be paid separately).

12 mm thick cement plastering including clearing surface and curing complete as directed. In prop. 1: 4.

Earthwork in filling in Marginal bund / Guide bank / Afflux bund / Canal embankment etc. to the design section and grade by obtaining earth from outside borrow pits and filling in uniform layers not exceeding 15 cm thick including clearing light jungle, removing trees upto 15 cm dia and uprooting roots and stumps from the seat of embankment and borrow pit area, breaking clods not more than 10 mm cube, ramming, watering, dressing and roughening the seat of embankment, profiling etc. Paying compensation of earth borrowed from private or forest land if any, lead upto 30 M and lift upto 1.5 M, complete as directed.

Construction of canal outlet 40 nos

Earth work in excavation of foundation of canal structures in all types of soil as per design and drawing dressing the foundation, shoring, etc. removing the surplus spoils by head load to a safe distance from the working place and depositing required spoils in uniform layers dressing, watering, breaking clods to not more than 10mm cube with compaction complete as directed at site (including bailing out stagnant water where necessary). a. All type of soil except soil mixed with gravel and boulders For normal lead of 30m and lift of 1.50m

Soiling in foundation floor at all levels including filling interstices,ramming etc complete as thickness with 9 cm brick on flat including sand packing

C. C work in prop 1:3:6 in foundation / abutment / piers / wings wall etc. with hard broken stone aggregate of size 13 mm to 38 mm including curing, dewatering water with necessary timber shuttering, scaffolding etc. where necessary complete as directed (shuttering, scaffolding cost will be paid separately).

1st Class brick work in cement mortar in abutment and wing wall,parapet wall etc. including racking out joints and curing etc. complete. (A) In proportion 1:3

12 mm cement plastering including clearing surface and curing, complete as directed, in prop 1:4

Supplying, fitting, fixing PVC pipes (IS 12818,6 kg/cm2 ), joining pipes with relevant cement, levelling, testing leakages etc, complete as directed. (Cost of E/W foundation trenches will be paid separately)

Neat cement finishing 3 mm thick with cement slurry prepared by mixing 27.50 Kg of fresh cement in appropriate quantity of clean water to cover 10 (ten) SqM of work area and to give a smooth and hard finishing including rounding corners, brooming, curing etc, complete as directed.

Embankment and bed filling as per design section and grade by truck carriage for a minimum distance of 4 KM including paying compensation of earth obtained from private land if any loading, unloading, spreading the same including light jungle, removing trees upto 15 cm dia and uprooting roots and stumps etc. from the seat of the embankment, breaking clods not more than 10 mm cube, ramming, profiling etc. with all lift, complete as directed. (Pavment will be made after deduction of 12.50 % shrinkage allowance from '

Construction of water collecting tank

Earthwork in excavation of foundation trenches including filling up sides of trenches and removal of spoils after completion of foundation, dressing, ramming, shoring etc. complete including bailing out water, where necessary, in ordinary soil.

Soling in foundation floor at all levels including filling interstices,ramming etc complete as directed and of specified thickness with 9 cm brick on flat including sand packing.

C. C work in prop 1:4:8 in foundation / abutment / piers / wings wall etc. with hard broken stone aggregate of size 13 mm to 38 mm including curing, bailing out water with necessary timber shuttering, scaffolding etc. where necessary complete as directed (shuttering, scaffolding cost will be paid separately)

RCC work in slab, abutment cap and above abutment, pier cap, pedestals, dirt wall etc. in proportion 1:2:4 with hard broken stone aggregate of size 6 mm to 20 mm with proper reinforcement as per design including necessary curing, dewatering etc. with necessary timber shuttering, scaffolding etc. where necessary, complete as directed. (Shuttering, scaffolding cost will be paid separately).

12 mm thick cement plastering including clearing surface and curing complete as directed. In prop. 1: 4.

Neat cement finishing 3 mm thick with cement slurry prepared by mixing 27.50 Kg of fresh cement in appropriate quantity of clean water to cover 10 (ten) SqM of work area and to give a smooth and hard finishing including rounding corners, brooming, curing etc, complete as directed.

Centering and shuttering including propping, nailing bolting with earth oiling inside face etc and removal of forms after completion of CC and RCC works etc, complete as directed. (Measurement to be taken on the face area timbered). (Abutment / Return Wall / Piers / Pedestal etc.)

Supplying fitting fixing and laying reinforcement (TATA) in position in RCC work including cutting, bending, cranking with two piles 0.91 M (20 BWG) annealed wire hooking tying, complete as directed.b) ISI approved super ductile TMT Bar (ii) TATA TMT Bar

Construction of Pump house

Demolishing plain cement concrete including disposal of debris as directed for all levels (i) Prop (1 : 4 : 8) or leaner mix

Demolishing brickwork including stacking of serviceable materials and disposal of unserviceable materials as directed for all levels

Dismantling all types of corrugated/ trapezoidal sheet roofing including ridges, hips, valleys and gutters etc. and stacking the materials as directed by the department for all levels

Earthwork in excavation trenches of walls, retaining walls, footing of columns, steps and septic tank including refilling (return filling) the quantity as necessary after completion of works, breaking clods in return filling, dressing, ramming, watering etc. and removal of surplus earth with all lead and lift upto 2 metre as directed and specified in following classification of soils, including bailing out of water where necessary upto depth below the existing ground level as mentioned in the approved drawing and complete as directed and specified.

Soling in foundation at all levels including filling intersides, ramming etc complete as directed and of specified thickness with 9 cm brick on flat including sand packing

C. C work in prop 1:4:8 in foundation / abutment / piers / wings wall etc. with hard broken stone aggregate of size 13 mm to 38 mm including curing, bailing out water with necessary timber shuttering, scaffolding etc. where necessary complete as directed (shuttering, scaffolding cost will be paid separately).

RCC work in slab, abutment cap and above abutment, pier cap, pedestals, dirt wall etc. in proportion 1:2:4 with hard broken stone aggregate of size 6 mm to 20 mm with proper reinforcement as per design including necessary curing, dewatering etc. with necessary timber shuttering, scaffolding etc. where necessary, complete as directed. (Shuttering, scaffolding cost will be paid separately).

Centering and shuttering including propping, nailing bolting with earth oiling inside face etc and removal of forms after completion of CC and RCC works etc, complete as directed. (Measurement to be taken on the face area timbered). (Abutment / Return Wall / Piers / Pedestal etc.)

Brick work in cement mortar with 1st class brick as directed above plinth level upto 1st floor level including racking out joints, curing and necessary scaffolding.

125 mm thick 1st class brick nogged wall in cement mortar in proportion 1:4 including racking out joints curing etc, complete as directed.

River sand filling in plinth, canal bed, canal slopes, bases of structure, etc in layers not more than 150 mm thick including necessary carriage, watering etc, complete as directed as specified.

65 mm thick traced flooring with cement concrete in proportion 1:2:4 with broken stone aggregate of size 6 mm to 20 mm over one 1st class brick flat solingincluding sand packing of the voids in between the bricks, watering, ramming properly where necessary etc. complete and 12 mm thick cement plastering. Finishing on top trowelling, altering, curing, complete as directed. (Brick soling to be paid seperately).

Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in positioning contact with C.C or brick masonry walls including supplying, fitting and fixing with M.S. flat hold fast (40mm × 3mm × 250 mm) as per design and embedded in cement concrete block in prop 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified.

Providing fitting fixing concrete ventilation of required size as available in local market

Providing fitting and fixing 1st class local wood for panelled / glazed doors and windows including supplying fitting and fixing iron fittings as detailed in APWD general specification except bim lock as directed.(ii) Full panel doors and windows (38 mm thick).

12 mm cement plastering including clearing surface and curing, complete as directed.(b) In cement mortar 1:3

Supplying fitting fixing and laying reinforcement (TATA) in position in RCC work including cutting, bending, cranking with two piles 0.91 M (20 BWG) annealed wire hooking tying, complete as directed.(b) ISI approved super ductile TMT Bar (i) TATA / SAIL

Providing undressed wood work in roof frame, truss, purlin etc. including supplying and fixing necessary spike nails, screw, straps, bolts and nuts of 16 mm dia etc, complete with kiricide oiling 2 coats as directed (sal wood).

Providing galvanized CI sheet roofing including supplying fitting and fixing necessary galved, screws / iron "J" hooks bolts and nuts with washers etc, complete as directed excluding cost of roof truss (measurement on net roof area) 0.63 mm thickness (24 BWG).

Providing 0.63 mm thick galvanized iron ridging including suplying and fixing with necessary galvanizedscrew washer etc. (23 cm lapping).

Distemper with approved distempering materials. (i) one coats

Clearing and cement washing with gum and water (i) For one coat

Applying priming coat over new wood and wood based surfaces over 100 mm in girth/width after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting .(b) With ready mixed paint ,wood primer (white).

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. a). General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

Providing, fitting and fixing in position plywood / hardboard partion walls with 6mm thick plyboard / hardboard (best) with horizontal and vertical Sal battens of size 50mm x 80mm spaced at not more than 1.20m apart with necessary nails, wood screws, bolts etc. complete as directed by the Department for all levels (Painting / Varnishing to be measured and paid separately)

Providing, fitting and fixing in position plywood / hardboard partion walls with 6mm thick plyboard / hardboard (best) with horizontal and vertical Sal battens of size 50mm x 80mm spaced at not more than 1.20m apart with necessary nails, wood screws, bolts etc. complete as directed by the Department for all levels (Painting / Varnishing to be measured and paid separately) (a) Sliding door bolt (i) 250mm x 16 mm

(b) Tower bolt (i) 200mm x 12 mm

(ii) 100mm x 10 mm

(c) Door handles (i) 100mm

Construction of Operator quarter Cum WUA office

Earthwork in excavation trenches of walls, retaining walls, footing of columns, steps and septic tank including refilling (return filling) the quantity as necessary after completion of works, breaking clods in return filling, dressing, ramming, watering etc. and removal of surplus earth with all lead and lift upto 2 metre as directed and specified in following classification of soils, including bailing out of water where necessary upto depth below the existing ground level as mentioned in the approved drawing and complete as directed and specified

Soling in foundation and under floor including filling interstices , ramming etc, complete as directed and as specified thickness (i) 9 cm brick on flat including sand packing

In proportion 1:3:6 (A) With hard broken stone aggregate 13 mm to 38 mm (i) CC work in proportion 1:3:6 in foundation/abutment/wing walls etc. With hard broken stone aggregate of size 13mm to 38mm including curing with necessary timebr shuttering scaffolding etc. where necessary complete as directed (shuttering scaffolding cost will be paid separately )In prop 1cement : 3 sand : 6 coarse aggregate by volume

In proportion 1:2:4 (A) With hard broken stone aggregate 6 mm to 20mm (i) CC work in proportion 1:2:4 in foundation/abutment/wing walls etc. With hard broken stone aggregate of size 13mm to 38mm including curing , bailing out water with necessary timebr shuttering scaffolding etc. where necessary complete as directed (shuttering scaffolding cost will be paid separately) a)M15 or prop. 1:2:4

River sand filling in plinth, canal bed, canal slopes, bases of structure, etc in layers not more than 150 mm thick including necessary carriage, watering etc, complete as directed as specified.

Centering and shuttering including propping, nailing bolting with earth oiling inside face etc and removal of forms after completion of CC and RCC works etc, complete as directed. (Measurement to be taken on the face area timbered).(Abutment / Return Wall / Piers / Pedestal etc.) (ii) Using 19 mm thick ply board

Brick work in cement mortar with 1st class brick as directed in foundation, retaining walls, plinth & steps including racking out joints curings (b) In proportion 1:4

125 mm thick 1st class brick nogged wall in cement mortar proportion 1:4 including racking out joints curing etc. Complete as directed

65 mm thick traced flooring with cement concrete in proportion 1:2:4 with broken stone aggregate of size 6 mm to 20 mm over one 1st class brick flat solingincluding sand packing of the voids in between the bricks, watering, ramming properly where necessary etc. complete and 12 mm thick cement plastering. Finishing on top trowelling, altering, curing, complete as directed. (Brick soling to be paid seperately).

Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in positioning contact with C.C or brick masonry walls including supplying, fitting and fixing with M.S. flat hold fast (40mm × 3mm × 250 mm) as per design and embedded in cement concrete block in prop 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified.

Providing fitting fixing concrete ventilation of required size as available in local market

Providing fitting and fixing 1st class local wood for panelled / glazed doors and windows including supplying fitting and fixing iron fittings as detailed in APWD general specification except bim lock as directed .(ii) Full panel doors and windows (38 mm thick).

Providing, fitting and fixing in position plywood / hardboard partion walls with 6mm thick plyboard / hardboard (best) with horizontal and vertical Sal battens of size 50mm x 80mm spaced at not more than 1.20m apart with necessary nails, wood screws, bolts etc. complete as directed by the Department for all levels (Painting / Varnishing to be measured and paid separately)).

12 mm cement plastering including clearing surface and curing, complete as directed. (b) In cement mortar 1:3

Supplying fitting fixing and laying reinforcement (TATA) in position in RCC work including cutting, bending, cranking with two piles 0.91 M (20 BWG) annealed wire hooking tying, complete as directed. (b) ISI approved super ductile TMT Bar (i) TATA / SAIL

Providing undressed wood work in roof frame, truss, purlin etc. including supplying and fixing necessary spike nails, screw, straps, bolts and nuts of 16 mm dia etc, complete with kiricide oiling 2 coats as directed (sal wood).(b) With SAL Wood

Providing galvanized CI sheet roofing including supplying fitting and fixing necessary galved, screws /iron "J" hooks bolts and nuts with washers etc, complete as directed excluding cost of roof truss (measurement on net roof area) 0.63 mm thickness (24 BWG).

Providing 0.63 mm thick galvanized iron ridging including suplying and fixing with necessary galvanized screw washer etc. (23 cm lapping).

Distemper with approved distempering materials. (ii) Two coats

Clearing and cement washing with gum and water (i) For one coat

Applying priming coat over new wood and wood based surfaces over 100 mm in girth/width after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting . (b) With ready mixed paint ,wood primer (white).

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint / Berger paint / ICI paint / J&N paint / Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matters sand papering and stopping . (i) Surfaces over 100mm in width or girth (i) General purpose (Asian paints / ICI paints / J & N paints / Nerolac)

Supplying,fitting ,fixing anodized aluminium fittings of approved make , reasonably smooth, free from sharp edges and corners , flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc complete (anodized to bright natural matt and satin finished ) (a) Sliding door bolt (i) 250mm x 16 mm

(b) Tower bolt (i) 200mm x 12 mm

(ii) 100mm x 10 mm

(c) Door handles (i) 100mm

Providing fitting and fixing vitreous water closet squatting pan (Europen type WC pan 400 mm high) with seat and lead, CP Brass hinges and rubber buffers CI/MS brackers, 40 mm dia flush band with fittings including painting of all fittings and brackets required. (Flushing Cistern to be paid separately) (iii) Universal closet P Trap, (CAT no. C0272 incl. Seat cover)

Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.L. as directed and specified. 110mm dia

Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.L. as directed and specified. 90mm dia

Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc.as necessary complete at all levels including below G.L. as directed and specified. 75mm dia

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all 75mm dia

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all 90mm dia

Rafizul Hoque

BALAJI CONSTRUCTIONS