Repair and Restoration of Arulmigu Veeravinotheeswarar Thirukovil, Velanguli, Ambasamudram taluk, Tirunelveli district.

Dismantling Lime concrete including removal of debris including all incidental charges etc complete

Dismantling RCC concrete including removal of debris including all incidental charges etc complete

Dismantling Brick / Stone Masonry in lime mortar walls under 3m high including removal of debris including all incidental charges etc complete

Clean removal of lime plaster from walls including all incidental and labour charges etc., complete

Removal of Doors and Windows including removal of frames, hinges and fastenings including labour and all incidental charges etc complete

Clean removal of Floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs including removal of debris from site and all incidental charges etc complete

Clean removal of Pressed Tiles & Weathering Course including all labour charges and incidental charges etc complete

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in lime Mortar 1:3 (One lime and Three Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same lime mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Removing the existing cut stone member including numbering the stones,conveying,stacking carefully at site for reuse ,handling, including hire charges for tools and plants ,scaffolding for working in heights and all incidental charges etc., complete.

Removing cutstone flooring including all incidental charges etc..complete

Pavukaal (New stone fixing and dressing)

Flooring (Refixing) including pointing in CM 1:1.5

Ulvari (New stone fixing and dressing)

Paavukal(Dressing and fixing)

Supply of cutstone of good variety and required size for approved quarry including cost and conveyance of cutstone for labour charges for loading and all other incidental charges

Earth work excavation for foundation (for open excavation) in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Cement concrete 1:5:10 (One of cement, five of M-sand and ten of HBG jelly )for foundation using 40mm gauge HBG jelly inclusive of shoring strutting and baling out water where ever necessary ramming curing etc.,complete as per Std, Specification and as directed by the Dept, Officers

R.R Masonary in Lime Mortar 1:3(one Heritage lime,and three crushed stone sand) for foundation and basement including simultaneously pointing above ground level with the same mortar etc.,complete

Brick work in LM 1:5 using country brick of size 83/4"x41/4"x2 3/4" including cost and conveyance of all materials and labour charges and all other incidental charges etc completc complying with standard specification.

Providing and laying in position, standardised concrete Mix M-20 Grade in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).

Plastering with Lime mortar 1:5,12mm thick including cost and conveyance of all materials and all labour charges, curing etc,complete complying with standard specifications.

Supplying and filling in foundation, basement, etc with filling crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Shuttering and centeringfor grade beams

Supplying fabricating and placing in position mild steel or ribbed for steel bar / rods for reinforcement grill for all RCC works including cost of steel and binding wire and labour charges for decoiling cutting binding and tying the grills etc complete complying with standard specification as directed by the departmental officers.

Three line dressing

Single line dressing

Supplying and fixing T.W Frames for Doors,Supplying and fixing T.W Frames for Doors,Windows, Ventilators and other similar joinery works with the following sizesand sections including labour charges for wrought and put up in position and also for fixing hold fast in frames and masonry etc complete in all floors.

Supplying and fixing Teakwood fully panelled shutters for using Teakwood scantlings upto 4m length and teakwood 40mm thick for styles and rails and 22mm thick for planks and panels including cost of wind appliances and labour charges for fixing the furniture fittings in position but excluding cost of furniture fittings complete as directed by the Departmental officers.

Supplying and fixing mild steel grills for windows, ventilators, etc., including priming coat

Vimanam / Gopuram upto 15' - 0' height

Vimanam / Gopuram upto 25' - 0' height

Thorough scrapping of old plastered surface including all labour charges and incidental charges etc complete

Sudhai size above 1' 0" up to 2' 6"

Vimanam / gopuram of ht. Up to 15'0" excluding Kalkaram

Painting two coat with approved water based Exterior Emulsion (Eagavarnam) over the cement plastered wall surface, ceiling and other new surface including clearing preparing the surface curing in all floors including brushes etc., complete as per specification. -10 m 2 ( S.I. No 358 )

Restoration by providing water wash and appropriate methodology to restore the originalities of the existing cut stone structure inclusive of necessary scafolding charges conveyance and all thire charges for all tools and plants and clearing the site after completion of work etc., complete.

Pointing for wall and ceiling with Lime Mortar 1:1.5 including cost of special tiles such brush and watering,curing etc complete,as per standard specifications

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide in one coat of Zinc chromite in all floors etc., complete complying with standard specification.

Polishing the teak wood door with two coats of best French (Lac) polish with approved quality and brand over a coat of bee's waxing including preparing the wooden surface to receive polishing, etc., complete complying as per the standard specifications. (The make, quality and colour of french polish, bees vax should be got approved by the Executive Engineer before use on works.)

Sub total