Civil and Electrical works of the existing vacant space of the northern side of the 4th floor of the Minority Bhawan, Malda and purchase of furniture for setting up of the 4th LC and IT at Malda Supply and installation Furnitures.

Amount

EXECUTIVE TABLE LH 1800 x 900 : Main table Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Gromet provided on work surface for wire management. Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconfirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Handle is provided for ease of opening. Storage is provided with cam lock for security.

PREMIUM EXECUTIVE VERY HIGH BACK CHAIR : The seat and back shall be made up of 1.2+/-0.1cm thick hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric and moulded polyurethane foam with PVC lipping all around. The moulded polyurethane foam shall be of density 45+/-2kg/m ³, and hardness load 16+/-2kgf as per IS:7888 for 25% compression. The dimensions of seat shall be- 56.0cm(W) x 49.0cm(D) and of back shall be 56.0cm(W) x 88.0cm(H).The one-Piece armrests should made of black integral skin polyurethane with 50-70 shore 'A' Hardness and reinforced with M.S insert. The armrests shall bescratch and weather resistant. The armrests shall be fitted to the seat with seat/armrest connecting strip assembly made of 0.5+/-0.05cm thick HR steel. The mechanism of the chair shall have following features : 360⁰ revolving type, Center tilt synchro mechanism, Tilt tension adjustment, Upright position locking, 17 degree+/-2 maximum tilt on pivot at center. The chair shall be provided with pneumatic height adjustment which shall have stroke of 12.0 +/- 0.3 cm. The bellow should be 3 piece telescopic type and injection moulded in black polypropylene. The pedestial shall be injection moulded in black 33% glass-filled Nylon-66. It shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 66.3+/- 0.5 cm pitch-centre-dia (76.3 +/- 1.0 cm with castors). The twin wheel castors shall be made black nylon. Overall dimensions of Chair shall be, Width of Chair - 76.3cm, Depth of Chair - 76.3 cm as measured from pedestal below. Height from ground - min 117.5cm to max 129.5cm. Seat height - min 41.0 to max 53.0cm. Dimensions tolerance / variations shall be within +/- 1 cm.

PREMIER VISITOR CHAIR WITH ARMS : The seat and back shall be made up of 1.2 ±0.1cm. thick hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and shall be upholstered with fabric and moulded Polyurethane foam with PVC lipping all around. The back foam shall be designed with contoured lumbar support for extra comfort. The dimensions of the back shall be 49.0 cm. (W) x 47.0 cm and of seat shall be 49.0 cm. (W) x 44.0 cm. (D). The HR Polyurethane foam shall be moulded with density= 45 ±2 kg/m3 and Hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. The armrest tops shall be injection moulded from black Polypropylene. They shall be fitted to tubular armrest supports made of dia 2.54 ±0.03cm. x 0.16 ±0.0128cm.thk. M.S. E.R.W. tube and black powder coated ( DFT 40-60 microns ). The tubular armrest supports should hold together the seat and back. The tubular frame shall be cantilever type & made of 0 2.54±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W. tube and black powder coated (DFT 40-60 microns). Overall Dimensions of Chair shall be Seat Height - 43.0cm, Height - 80.0cm, Width & Depth of Chair as measured from pedestal - Width-55.0 cm and Depth-61.0 cm.

4 DOOR BOOK CASE ( NEW WITHOUT TOP) : 4 Door Book Case shall have the configuration of 914mm(W)x320mm(D)x1742mm(H). The unique design provides the right rigidity to the Top hinged doors , which shall facilitate easy use. The Book Case shall be made from prime quality CRCA steel with anti rusting treatment. It shall have a Rigid Knock Down Construction. The Top Pannel, Back Pannel and Side Pannel are made from 0.7mm high yield CRCA and other components from 0.8mm CRCA. Each door shall have a 6 Lever Cam Lock with Common Key. 3mm thick glass should be used in each door for clear inside vision whih shall be secured in a metal frame through a rubber gasket. Scissor Mechanism should be provided in each door for receding inside the top of every compartment and it shall ensure parallel and smooth movement. Each door should be provided with plastic side end caps as handle which is easy to grip. Each compartment shall have a storage shelf with a UDL capacity of max 80 Kg. The 2 Door Book Case shall have 18mm PLB Top straight edge with PVC lipping. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10).

EXECUTIVE TABLE : Table - size shall be 1199 Width x 590 Depth x 735 Height . The top panels shall be made from 18 +/- 0.5 mm thick Pre - laminated boards as per with 2 mm thick PVC edge banding on all sides . Understructure shall be made from 0.9 mm +/- 0.09 mm thick powder coated 50 microns (+/-10) CRCA MS. Tubular Frame shall be dia. 25.4 +/- 0.3 mm x 1.2 +/- 0.096 mm thick MS ERW tube .Modesty panel shall be made from 1.0 +/- 0.09 mm thick powder coated 50 microns (+/- 10). The Storage shall be having shell 0.5 +/- 0.07 mm thick CRCA MS plus drawer tray 0.5 +/- 0.07 mm thick CRCA MS plus drawer front 0.8 +/- 0.1 mm thick CRCA MS . Also there should be 10 lever cam lock plus handles built in plastic.

PREMIUM EXECUTIVE MID BACK CHAIR : The seat and back shall be made up of 1.2+/-0.1cm thick hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric and moulded polyurethane foam with PVC lipping all around. The moulded polyurethane foam shall be of density 45+/-2kg/m ³, and hardness load 16+/-2kgf as per IS:7888 for 25% compression. The dimensions of seat shall be- 49.0cm(W) x 44.0cm(D) and of back shall be 49.0cm(W) x 47.0cm(H).The one-Piece armrests should made of black integral skin polyurethane with 50-70 shore 'A' Hardness and reinforced with M.S insert. The armrests shall bescratch and weather resistant. The armrests shall be fitted to the seat with seat/armrest connecting strip assembly made of 0.5+/-0.05cm thick HR steel. The mechanism of the chair shall have following features : 360⁰ revolving type, Center tilt synchro mechanism, Tilt tension adjustment, Upright position locking, 17 degree+/-2 maximum tilt on pivot at center. The chair shall be provided with pneumatic height adjustment which shall have stroke of 12.0 +/- 0.3 cm. The bellow should be 3 piece telescopic type and injection moulded in black polypropylene. The pedestial shall be injection moulded in black 33% glass-filled Nylon-66. It shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 66.3+/- 0.5 cm pitch-centre-dia (76.3 +/- 1.0 cm with castors). The twin wheel castors shall be made black nylon. Overall dimensions of Chair shall be, Width of Chair - 76.3cm, Depth of Chair - 76.3 cm as measured from pedestal below. Height from ground - min 77.5 to max 89.5cm. Seat height - min 41.0 to max 53.0cm. Dimensions tolerance / variations shall be within +/- 1 cm.

MULTIPURPOSE CUSHIONED CHAIR WITH ARMREST : The seat and back shall be made from 1.0±0.1cm. thk. hot pressed moisture resistant, commercial plywood measured as per QA method described in OCP-QLTA-P14-18 and shall be upholstered with P.U. foam and fabric. The dimensions of Back shall be 42.0cm. (W) X 26.5cm. (H) and of seat shall be 42.0cm (W) X 42.0cm (D). The HR Polyurethane foam shall be moulded with density =45+/-2 .kg/m3 and Hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. The understructure assembly shall be a cantilever type mainframe made of dia 2.54 ±0.03cm. x 0.2 ±0.016cm.thk.M.S. E.R.W. tube and black powder coated ( DFT 40-60 microns ). The armrests shall be made in twin tube form using dia 1.58cm. (5/8") x 0.16 ±0.0128cm.thk. M.S. E.R.W. tube and black powder coated (DFT 40-60 microns). Overall Dimensions of Chair shall be Seat Height - 46.0 cm, Height - 82.5cm, Width & Depth of Chair as measured from pedestal shall be Width-54.0cm and Depth-59.5 cm.

STEEL ALMIRAH : Steel Almirah shall have an overall size of 916mm(W)x486mm(D)x1980mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available.

File Optimizer Single Static 1 Bay Push Pull Type : Overall Dimensions of SS1 - Single Static 1 Bay Push Pull Type (U/C + Fittings) shall be 915mm(W)x457mm(D)x1980mm(H). The Construction shall be Welded Construction sheet tickness is 0.8 mm for back & shelves and 0.9 mm for sides & top . Finish shall be Epoxy polyester powder coated thickness of 40 microns . Shelf construction shall be made from CRCA steel 0.8 mm thick IS :513 .Uniformly distributed load capacity of 80 Kg . Undercarriage shall have construction in welded frame made of HR sheet 3.15 mm thick conforming to IS : 10748 . Finish shall be epoxy polyester powder coat of approved color & shade with a dry film thickness of minimum 40 microns . The movements of the system shall be Push pull configuration (TYPE-P1/TYPE-P2) : Movement of units achieved by pushing or pulling chrome plated 'C' Handle fitted onto 1.6 mm thick plate (mounted on each double & single movable units) & rigidly fixed at suitable height on body side . Each movable undercarriage has 4 nos. of antifriction ball bearings for rolling onto channels & 4 no. of antifriction ball bearings for guiding between channels & 'J' section . Fittings shall be centralized locking arrangement through locking stiffener mounted onto back of single last unit so that it gets locked on channels when all the units are brought together . The Recess handle lock is of Godrej make & placed at suitable height . This arrangement occupies a space of 90.0 mm . When the last unit is twin movable , hinged doors are provided for the end bodies, so in this case locking stiffener is mounted onto drive unit cover ; and with tile fascia option , it will be mounted in the recess of vertical trim . Each Drive Type units shall have Locking Knob near the drive wheel for manual locking of individual units when a person is using those units . Knob shall be rotated to unlock position when units are to be moved . End stoppers shall be provided to prevent derailment . Door locking shall be having hinged doors of recessed die cast handle cum lock giving 3 way locking through a lever & shooting bolts . Guide channels shall have 'J' section 2 mm thick HR & 25 mm Square bright bar . Easteners shall be galvanized/blackodized/Zn plated .The label holder shall be made from 2 mm thick clear transparent acrylic sheet . Also total no. of loading levels per understructure shall be 6 for SS1 : Overall Dimensions of SL1 - Single Last 1 Bay Push Pull Type (U/C + Fittings + Handle) shall be 915mm(W)x457mm(D)x1980mm(H). The Construction shall be Welded Construction sheet tickness is 0.8 mm for back & shelves and 0.9 mm for sides & top . Finish shall be Epoxy polyester powder coated thickness of 40 microns . Shelf construction shall be made from CRCA steel 0.8 mm thick IS :513 .Uniformly distributed load capacity of 80 Kg . Undercarriage shall have construction in welded frame made of HR sheet 3.15 mm thick conforming to IS : 10748 . Finish shall be epoxy polyester powder coat of approved color & shade with a dry film thickness of minimum 40 microns . The movements of the system shall be Push pull configuration (TYPE-P1/TYPE-P2) : Movement of units achieved by pushing or pulling chrome plated 'C' Handle fitted onto 1.6 mm thick plate (mounted on each double & single movable units) & rigidly fixed at suitable height on body side . Each movable undercarriage has 4 nos. of antifriction ball bearings for rolling onto channels & 4 no. of antifriction ball bearings for guiding between channels & 'J' section . Fittings shall be centralized locking arrangement through locking stiffener mounted onto back of single last unit so that it gets locked on channels when all the units are brought together . The Recess handle lock is of Godrej make & placed at suitable height . This arrangement occupies a space of 90.0 mm . When the last unit is twin movable , hinged doors are provided for the end bodies, so in this case locking stiffener is mounted onto drive unit cover ; and with tile fascia option , it will be mounted in the recess of vertical trim . Each Drive Type units shall have Locking Knob near the drive wheel for manual locking of individual units when a person is using those units . Knob shall be rotated to unlock position when units are to be moved . End stoppers shall be provided to prevent derailment . Door locking shall be having hinged doors of recessed die cast handle cum lock giving 3 way locking through a lever & shooting bolts . Guide channels shall have 'J' section 2 mm thick HR & 25 mm Square bright bar . Easteners shall be galvanized/blackodized/Zn plated .The label holder shall be made from 2 mm thick clear transparent acrylic sheet . Also total no. of loading levels per understructure shall be 6 for SL1 : Overall Dimensions of TM1 - Twin Mobile 1 Bay Push Pull Type(U/C + Fittings + Handle) shall be 1830mm(W)x457mm(D)x1980mm(H).The Construction shall be Welded Construction sheet tickness is 0.8 mm for back & shelves and 0.9 mm for sides & top . Finish shall be Epoxy polyester powder coated thickness of 40 microns . Shelf construction shall be made from CRCA steel 0.8 mm thick IS :513 .Uniformly distributed load capacity of 80 Kg . Undercarriage shall have construction in welded frame made of HR sheet 3.15 mm thick conforming to IS : 10748 . Finish shall be epoxy polyester powder coat of approved color & shade with a dry film thickness of minimum 40 microns . The movements of the system shall be Push pull configuration (TYPE-P1/TYPE-P2) : Movement of units achieved by pushing or pulling chrome plated 'C' Handle fitted onto 1.6 mm thick plate (mounted on each double & single movable units) & rigidly fixed at suitable height on body side . Each movable undercarriage has 4 nos. of antifriction ball bearings for rolling onto channels & 4 no. of antifriction ball bearings for guiding between channels & 'J' section . Fittings shall be centralized locking arrangement through locking stiffener mounted onto back of single last unit so that it gets locked on channels when all the units are brought together . The Recess handle lock is of Godrej make & placed at suitable height . This arrangement occupies a space of 90.0 mm . When the last unit is twin movable , hinged doors are provided for the end bodies, so in this case locking stiffener is mounted onto drive unit cover ; and with tile fascia option , it will be mounted in the recess of vertical trim . Each Drive Type units shall have Locking Knob near the drive wheel for manual locking of individual units when a person is using those units . Knob shall be rotated to unlock position when units are to be moved . End stoppers shall be provided to prevent derailment . Door locking shall be having hinged doors of recessed die cast handle cum lock giving 3 way locking through a lever & shooting bolts . Guide channels shall have 'J' section 2 mm thick HR & 25 mm Square bright bar . Easteners shall be galvanized/blackodized/Zn plated .The label holder shall be made from 2 mm thick clear transparent acrylic sheet . Also total no. of loading levels per understructure shall be 12 for TM1 : Overall Dimensions of Channel 9'0'' shall be 9 feet (L) . Guide channels shall consist of 'J' section 2 mm thick & 25 mm square bright bar - both connected by screws . Prior to the embedding of the guide channels with the help of raul plug & screw , the ground has to be in proper leveled condition : Overall Dimensions of Channel 3'0'' shall be 3 feet (L) . Guide channels shall consist of 'J' section 2 mm thick & 25 mm square bright bar - both connected by screws . Prior to the embedding of the guide channels with the help of raul plug & screw , the ground has to be in proper leveled condition .

Godrej And Boyce Mfg.Co.Ltd.

SANKAR FURNITURE