REPAIR MAINT OF AREA DRAINAGE HARDSTANDING CHEQUERED TILES KOTA STONE AND OTHER MISC BR WORKS INCLUDING REPAIR MAINT RESURFACING OF EXISTING ROAD OF 28 AD REGT 707 TSU 955 AD WKSHP LT AD BTY DEPOT BTY OF ZONE B AREA AT GMS UNDER GE I GOS

Amount

Demolition of cement concrete unreinforced in ground floor and paving exc 15cm thick (below or above ground level) complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 using 40 mm graded stone aggregates as in hard standing 100 mm thick laid in panels and finished even and smooth without using extra cement and spike rolling to surfaces or making impression of expanded metal whilst the concrete surface is green complete all as specified and directed.

M & L for Screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L chequered cement concrete tiles 20 cm X 20 cm X 25 mm thick, set , jointed and pointed in neat cement slurry in floors with pigments complete all as specified and directed.

M&L for sand cushioning including spreading in layers and rolled consolidated to thickness of 50mm (minimum) for receiving precast PCC interlocking blocks complete all as specified and directed.

S&F machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed.

M&L for 75 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring surface finished even and rough to receive the topping layer complete all as specified and directed.

M&L for Machine cut kota stone slab flooring mirror finished 20-25 mm thick (each slab not less than 0.25 Sqm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 20 mm thick screed bed or bedding layer in cement mortar 1:4, including rubbing and polishing complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate, as in plinth protection laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and directed.

Removing / taking out plants roots prtrouding from wall / vertical surfaces / horizontal surfaces in including removal of roots cleaning and making good by applying bonding agent algibound fepx algi coal ec 100,filling with cement mortar 1:4 with using water proofing compound complete all as specified and directed. (NOTE:- The quoted rate including water proofing compound)

Cleaning and removing all scale and dirt etc from tank and from mouths of circulating pipes etc of tank capacity exc 500 litres and not exc 1000 litres complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tank and from mouths of circulating pipes etc of tank capacity exc 1000 litres and not exc 2000 litres complete all as specified and directed.

M & L brick work with fly ash bricks, Straight or curved on plan exc 6m mean radius,built in CM 1:6 in cement mortar complete all as specified and directed.

Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (horizontal or sloping) for rough finished flat surface of concrete complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) type B0 1:2:4 (12.5mm graded stone aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for MS TMT bars, 5mm dia and over upto and incl 10 mm dia in spacers, stirrups and binders , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality confirming to Fe-410-W or Fe 290 (as in rungs/handles) complete all as specified and directed.

M&L for providing precast cement concrete louvres and jallies 35 mm thick (measured solid) including all mouldings but excluding frame in cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregates and set in cement mortar 1:4 complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick work or concrete surface of wall in CM 1:6 and to be finished even and smooth with out using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coat of white wash over a coat of primer complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 20mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

M&L for walling of random rubble uncoursed stone masonry, well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed.

All as per Item No.23 above but except stone

Hammer dressing to RR masonry wall (granite basalt/trap stone) uncoursed with maximum depresion of 40 mm from straight edge held against the surface complete (for area to be pointed) complete all as specified and directed.

M&L for keyed pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar 1:4 complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, coping, benching, bed block, lintel band, plinth courses etc and similar work including weathering,slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed.

Dismantling of AC corrugated / semi corrugated sheet as in roof coverings complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Excavation in any type of soil for post holes (or similar holes) each not exceeding 0.50 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance not exceeding 50 m and making good surface complete all as specified and directed.

S&F rolled mild steel section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connected plates of grade Fe 410-W (Gde E-250) quality A complete all as specified and directed

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Cleaning and removing all blocked scale and dirt, etc, from manholes/traps/gully traps/tanks from mouths of circulating pipes, etc. including Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

Cleaning of sewage line including manholes of any dia by roding and flushing after cleaning and removing mud/sludge etc to a distance exc. 250m but n.exc 500m and spreading in low laying areas and covering with loose soil and complete all as specified and directed. Note:- Length shall be measured through out the manhole

M&L for cutting and removing wild bushes/ vegetation, surface dressing around the septic tank/sock well/ manholes to a distance of 2 mtrs and along sewage line all around and depositing surplus spoil/ rubbish exc 100M but n.exc 500 M complete all as specified and directed.

M&L for removing of sludge from septic tanks including removal of sludge water manually or mechanically in all respect and removing the sludge to distance not exceeding 500 mtrs and burried in to the ground and making to a true surface and covering with loose soil complete all as specified and directed. (Note: The rate included excavation and filling )

M&L for repair to potholes any depth, not exc 1 Sqm each including sweeping free from dust and mud or water scoring sunken surfaces in roads, paths etc cutting around edges to at least 25 mm in depth, making good by filling in screened and graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed.

M&L for preparing existing blacktop surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as specified and directed.

M&L for applying evenly a priming/ tack coat with bituminous primer at 5 kg per 10 sq metres of paving bitumen (VG 30) complete all as specified and directed.

M&L for premix bituminous macadam with 4% binder paving bitumen (VG 10) content by weight of total mix laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) and rolled with power roller 8 to 10 ton complete all as specified and directed.

M&L for laying and spreading of bituminous pemixed asphaltic semi dense concrete 40 mm consolidated thickness with 5.5% binder content by weight of total mix rolled and compacted to required camber and gradient complete using paving bitumen (VG 30) any penetration. ( The SDAC laid with mechanical paver and rolled with 8-10 tonne tandom power roller) complete all as specified and directed.

M&L for preparation of new/old surface of road and applying 1.0mm thick and 100 mm wide reflective resign thermoplastic paint by hot application of approved colour/make complete all as specified and directed.

S&F of colour reflective pavement marker (cat eye) with micro prismatic lens in both direction having thermoplastic body with flex resistant base & abrasion resistant creamer coating fixing of road surface with special adhesive and Suitable rivet head nail complete all as specified and directed.

S&F Sparkle solar road studs size 125 mm x 125 mm x 90 mm ht with detachable battry 6 LEDs three on each side, ultra bright LED in red/yellow colours completely water resistant and weather proof, using of adhesive and fixing procedure as per manufacturer supervision of their competent technician etc complete all as specified and directed.

S&F "Sparkle road side delineators with tri-colour reflector and 150mm wide reflectro radium sticker pasted over painted MS pipes approx 100mm dia and 100 cm long fixed in cement concrete bedding 150mmx150mmx300mm, 1:3:6 type C-1 (using 20 mm graded aggregate incl necessary earth work complete all as specified and directed.

S & F Alcolite spring post/flexible delenator, strong flexible UV protected PU & PVC with high intensity reflective light material crystal lattice, 75mm dia 750mm height including all necessary fittings complete all as specified and directed.

M&L for 75 mm thick spread thickness Moorum/red bajri spread, rolled and consolidated to gradient and camber required complete all as specified and directed.

M/s Bapujee Builders and Traders

Likitha Enterprises