Providing galvalume sheet shed with structural steel support for chiller compressor and blower rear side of the environmental test facility building at MCSRDC HAL Bangalore

TECHNICAL BID (PREQUALIFICATION CRITERIA) (Based on the Tender Notice)

Name of the Work “Providing Galvalume Sheet Shed with Structural Steel Support for Chiller, Compressor & Blower Rear Side of the Environmental Test Facility Building at MCSRDC, HAL Bangalore.”

Contract No. (Tender No.): HAL/MCSRDC/PMD/01/2025-26

Name of the Company:

Sl No. Particulars Enter Related Details in full Have you uploaded the relavant document? Indicate Yes or No

I ESSENTIAL CRITERIA

a EMD: 1. Enter Demand Draft (DD) details of EMD paid i.e. amount/date/Bank etc. Upload the scanned copy and send original to HAL Address. 2. If you are the PEMD holder provide details & upload the Certificate holding. 3. If you are exempted from paying SD/EMD etc? Provide details and upload the certificate holding.

b SOLVENCY: Provide all the details of the Certificate, i.e. Date drawn, Amount, Bank etc.

c EXPERIENCE: Provide the details of Nature of the work carried out & total years of experience. Attach work completion certificates issued by the firms or attach POs with TDS certificate for the works fully completed.

d ANNUAL TURN-OVER: Upload details and proofs of Income Tax Returns/Annual Turnover/Balance sheet/Profit-loss sheet for the last three years.

e PAN / GIR no. Registration: Enter no. and upload certificate

f GST Certificate.: Enter no. and upload certificate

g ESI Certificate: Enter no. and upload certificate

h PF Certificate: Enter no. and upload certificate

i REGISTRATION: 1. Registered with HAL: Such vendors (registered under Works & Contract Procedure by depositing PEMD amount) shall upload a valid copy of registration certificate issued by HAL. 2. Unregistered contractors of HAL/Registered contractors of HAL with a lesser tendering limit should upload all the documents, as per NIT. 3. If registered with any of PSUs/Govt. Dept/Govt. undertakings etc, upload the copy of registration certificate & provide details.

II. DESIRABLE CRITERIA

1. Constitution & Legal Status Certificate details. 2. Details of License for executing this kind/nature or specialized type of works from the concerned authorities/organizations etc. 3. Memorandum of undertaking for all the firms except proprietary firms.

III. BANK DETAILS FOR NEFT/RTGS FOR FUTURE TRANSACTIONS:

a Upload Cancelled Bank Checque Leaf copy.

Name of the Bank

Nature of Account (Current/savings):

IV Note that Validity of your Offer should be 90 Days from the date of opening of the tender.

ISSUING OFFICER SIGNATURE OF THE CONTRACTOR WITH SEAL AND DATE

"PROVIDING GALVALUME SHEET SHED WITH STRUCTURAL STELL SUPPORT FOR CHILLER, COMPRESSOR & BLOWER REAR SIDE OF REAR SIDE OF THE ENVIRONMENTAL TEST FACILITY BUILDING AT MCSRDC , HAL BANGALORE."

Sl. No. CPWD / DSR 2023 Ref no Description Qty Unit Rate in Rs. Rate( DSR rate*1.18* 0.973) Rate Excl GST Amount in Rs.

1 2.6.1 Earth work in excavation by mechanical means {Hydraulic excavator)/manual means over areas (exceeding 30 em in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. 2.6.1 All kinds of soil 0.5 cum 177.5 187.23 158.67 79.33

2 10.25.2 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works etc., complete as directed by EIC 1000 Kgs 172.6 182.06 154.29 154288.14

3 11.7 Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete. 0.5 Cum 8595.15 9066.42 7683.41 3841.70

4 12.5 Providing and fixing precoated galvanised iron profile sheets {size,shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 80 sqm 738.65 779.15 660.30 52823.73

5 13.3.1 Cement mortar (1:4) plastering 20mm thick for brick/concrete surfaces, finished smooth with trowel including scaffolding, curing etc., all complete as directed by Engineer-in-Charge. 5 Sqm 471.35 497.19 421.35 2106.74

6 13.99 Painting with synthetic enamel paint for steel / wooden surface of approved brand and manufacture of required colour to give an even shade 200 Sqm 102.8 108.44 91.90 18379.66

Dismantling & Demolishing

7 15.7.4 Demolishing brick work built in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 0.5 Cum 2060.2 2173.16 1841.66 920.83

8 15.56 Dismantling of old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50m lead and all complete as directed by Engineer-In-Charge 5 Sqm 54.65 57.65 48.86 244.28

Sub-Total Amount Rs. 232684.41

Add 18% GST on Basic Value Rs. 41883.19

Sub Total Amount Including GST Rs. 274567.61

Contractors Percerntage Profile over (+) / below (-) of the above HAL Estimate 0.00

Grand Total of Estimate Rs. 274567.61