PROVN OF MT SHED AND RAMP FOR REPAIR TO VEH AND WINDOWS WITH PVC CHAJJA AT CAMS INCLUDING CERTAIN REVENUE AND MINOR WORKS UNDER AGE B/R-I OF GE (SOUTH) DELHI CANTT-10

Amount

Excavating in post holes (or similar holes) each n.exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc 50m and making good surface, work in soft/loose soil complete all as specified and as directed.

M&L for PCC 1:2:4, Type B-2, using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

S&F Steel work in tubular trusses including special shaped washer, including scafolding upto 5 to 6m, butt welding, wastage, bend etc. complete using ERW or induction butt welded tubes conforming to IS : 1161-1979 grade St.-240 complete all as specified and as directed.

S&F Plates (plain or chequered) Fe-290 (Gde E-165) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed.

M&L for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L brick work in cement mortar (1:6) using sub class 'B' bricks, straight or curved on plan exc 6 mtr mean radius complete all as specified and as directed.

Preparation of new surface of steel of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and as directed.

S&F 1 mm thick plain, galvanised, mid steel shetting in noges, hips, vaily gutters, dripand straight fliashings and girth as fixed) with iron posts complete all as specified and as directed.

S&F in repairs PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls/iron posts for rain water pipes complete all as specified and as directed.

M&L cement concrete 1:2:4, type B-1, using 20mm graded stone aggregate for plinth protection etc. complete all as specified and as directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M&L for Rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:4) finished even & fair without using extra cement work complete all as specified and as directed.

M&L for preparation of new plastered wall surfaces and applying two coats of cement base paint, white or tinted (colour and shade as per new colour scheme approved by GE) over a coat of primer of same make including scaffolding for four storey building complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying applying two coats of oil emulsion distemper white or tinted over and incl wall care putty to make smooth surface including scaffolding arrangement, trestles, ladders etc. complete all as specified and as directed.

M&L for preparing of old decorated surfaces of (Plastered or unplastered) including cornices pillasters and other wall features by washing, rubbing down and stopping of distempered and painted surfaces of walls and applying two coat of oil emulsion distemper white or tinted including scaffolding arrangement, trestles, ladders etc complete all as specified and as directed.

M&L for preparation of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing scraping down smoke soot moulds moss and efflorescent salts and treating oily & greasy spots and filling of holes and cracks with suitable material like cement or wall care putty and there after applying two coats of Cement base paint on walls complete all as specified and as directed.

M&L for PCC 1:4:8, type D-2, using 40mm graded stone aggregate as in sub base etc. complete all as specified and as directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for Glossy finished pre-polished coloured machine pressed precast concrete interlocking paver block any shpe and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade with grey cement and pigments complete all as specified and as directed.

Providing, cement concrete 1:2:4, Type B-1, 20mm graded agg in roof kerbs or mud stops, rounded or chamfered on edges, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones, bed plates, kerbs not provided and set in CM 1:6 complete all as specified and as directed.

Excavation in trenches in soft/loose soil, n.exc 1.5m wide & n.exc 1.5m in depth as in foundation, mainholes etc. n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out complete all as specified and as directed.

Returning, filling in including, spreading, levelling, watering and well ramming in layers n.exc 25cm thick, in soft/loose soil complete all as specified and as directed.

Removal of excavated surplus soil to a distance n.exc 50 metre where directed by Engr-in-Charge at a level n.exc 1.5m above or below the starting point complete all as specified and as directed.

M&L for hard core of gauge n.exc 63 mm deposited, spread levelled in layers n.exc 15cm thick watered and and rammed to a true surfaces complete all as specified and as directed.

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work exceeding 200mm thick (Horizontal or sloping complete all as specified and as directed.

M&L RCC, M-30 using 20mm graded stone Aggregates slabs supported on walls, beams and column in floors, roof, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L MS TMT bars 10mm and above, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in reinforcement complete all as specified and as directed.

M&L Mild steel TMT bars 5mm dia & over upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and as directed.

Demolition of reinforcement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Demolition of brick work built in CM incl quoins, arches, pillers etc. complete all as specified and as directed.

M&L for poweder coated aluminium anodised three way track sliding windows of frame size 92mm x 31.75mm x 1.5mm thickness (Section No. 20831 of JINDAL) and of shutter size 40 mm x 18 (with 9.00 mm interlocking legs) x 1.45 mm thick (Section No.20737 of JINDAL) section (two shutter glazed, covering half of span of opening each & one shutter sketlon covering half of span of opening) incl provn for making windows air tight, including 95mm aluminium handle with spring lock, stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4mm and fixed with steel wire stapples and 5mm thick plain glass including necessary fitting/ fixture/ aluminium snap beads and including taling old steel window any shape and size complete all as specified and as directed. Note: Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately.

S&F fabricated aluminum window with powder coated anodized aluminum frame of section 63.5mm x 38.10mm x1.5mm thick, shutter with section 47.62mmx44.45mmx1.5mm thick including aluminum anodized “D" handle, hinges, peg stays, tower bolts, etc including jointing cleats for fixing builder's hardware fittings & stainless steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples including necessary fittings/fixture/aluminum snap beads and including taling old steel window any shape and size complete all as specified and as directed. Note: Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately.

S& F Aluminium powder coated Grill (DECO grill DG 103 of 7.5 mm thick of M/s ELESAR, M/S Royal Grill, M/S National Grill Associated profiles & Aluminium Ltd ) fixed with suitable 'F' Section (No.8584) 15.30 X23.40X 1.40 mm (minimum), fabricated adn riveted to aluminium window/ventilators complete all as specified and as directed.

S&F Polycarbonate sheet (red colour) 8 to 10mm thick as in roof/chajja covering fixed with self tapping screw complete all as specified and as directed.

S&F factory made 1.5 mm thick SS Sheet of grade 304, made stainless steel gutter of trapezoidal shape with necessary arragment including cutout with slive piece for 300/150 mm dia pipe of 300 mm long piece of circular shape, cutting bending necessary welding, making leak proof gutter supported on existing frame work at any height any position including necessary ecaffolding complete all as specified and as directed.

M&L for Providing the hole of 100 mm dia in RCC beam and fixed the SS Curcular pipe of 100 mm dia in full length making the leak proof of curcular pipe complete all as specified and as directed.

S&F rolled mild steel work as in post and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire etc, flat iron fillets (for escuring wire mesh etc.) including all necessary drilling, bolting or riveting etc and similar work conforming to GDE Fe 410-0 or Fe 310-0 complete all as specified and as directed.

S&F PVC (SWR) PIPE any radius, of 300mm bore size complete all as specified and as directed.

S&F PVC (SWR) bends any radius,with threaded type door eye of 300 mm bore size complete all as specified and as directed.

S&F aluminium composite panels cladding of approved make having total thickness of 4 mm (Top coil - 0.5mm, non Toxic PE - Core - 3mm and back Coil - 0.50 mm) with 25 micron PVdF Coating on top coil and polyester / epoxy coating on back coil (4-7 microns) on aluminium substructure fixed with 19 mm x 12 mm x 1.6 mm aluminium cleat & 10 x 100mm SS Wooden screw with PVC plug on faced horizontal/ vertical surfaces of rectangular/circular columns, suspended ceiling Cills, jambs, canopy with including neccessary aluminium frame, scafolding etc. and making 12mm to 20mm wide grooves and applying non staining and non streaking sealant of Dow corning (789 or 991 HP) and backing rods complete as specified and approved shade by Engr-in-Charge. Only exposed surface shall be measured and paid for ACP Material shall be for exterior application &of shade as approved by GE complete all as specified and as directed.

Dismantling of brick tiles (laid flat or on edge) on roof surface laid bedded and pointed in any mortar and including dismantling of mud in roof, any thickness, including plastering and leeping upto two storey bldg incl necessary scaffolding arrangement complete all as specified and directed (whether full thickness removed or only a part there of) and removing from cantonment area or complete all as specified and as directed.

M&L for brushing neat cement slurry with 1.00 Kg of cement per Sqm on existing surfaces complete all as specified and as directed.

M&L for 75 mm thick (average thickness) plain cement concrete 1:2:4 type B-0, using 12.5 mm graded stone aggregate, as in roof, padding to maintain the uniform slope including 10 mm thick (average) plaster on concrete surfaces in CM (1:4) on roof, mixed with liquid water proofing compound as per manufacuring instruction and finishing the surface even and smooth with using extra cement complete all as specified and as directed.

M&L for Priming roof surfaces and applying water proofing treatment over roofs comprising of the following complete all as specified & as directed:-

(a) Applying oil bound bituminous primer at the rate of 0.30 Ltrs/Sqm as per IS 3384-1986 on prepared surfaces. Surface shall be kept free till the moment, the primer is impregnated and the solvent oil in primer is evaporated.

(b) Applying one coat of hot straight run bitumen @ 1.20 Kg/Sqm of grade 30/40 confirming to IS-73 (Grade S-35).

(c) Laying 3mm thick APP polymeric water proofing membrane of weight not less than 3.6 kg/sqm, black finish reinforced with non woven polyster matt, (weight not less than 160 gm/Sqm) with a thermo fusible finish, torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer's instruction including preparation of surface.

(e) Make of APP : "Moply FP" manufactured by STP Texsa Ltd or Hyper Plas (Polyester) manufactured by M/S IWL Ltd or "Shaliplas"ter) manufactured by M/S Capital Steels and Chemical Pvt Ltd or Makpolyplast manufactured by M/S M K Patro as approved by GE.

Note:- The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators. The contractor shall give 10 years guarantee for effectiveness of water proofing treatment, 2.5% of work done amount of this item shall be retained from contractors payment for a period of 10 years reckoned from date of physical completion of this work, or in lieu contractor may deposit bank FDR for the said amount for 10 years which shall be released by GE on expiry of satisfactory completion of 10 years period.

All as per item No.46 above, but on vertical surfaces.

M&L for cement concrete tiles 30cmx30cmx20mm thick laid over and including 20mm thick screed in cement mortar 1:6 and jointed grouted and pointed in CM 1:3 complete all as specified and as directed.

M&L for 15 mm thick rendering (external and internal surfaces) with redimix plaster (as per manufaturer's instruction) on faces of brick or concrete surfaces finished even and smooth surface wihtout using extra cement on wall of up to four stories bldgs including taking down cement plaster complete all as specified and as directed. Notes:- 1. Make of readymix plaster shall be Birla Aerocon/Ultratech Readiplast/ACC Accoplast/Fosroc Chemical (India) Pvt Ltd Renderoc and as approved by GE) 2. The readymix plaster shall be procured directly from the manufacturer or their authorised dealer.

M&L for preparation for applying two coat of 100% Premium acrylic emulision paint having VOC less than 50 gm/littre and UV resistence as per IS 15489 : 2004, Alkali fungal resistence dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm including 2 mm thick wall care putty to acheive even and smooth surfaces of wall over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete all as specified and as directed.

M&L for preparation of old decorated wall surfaces by complete removal of existing treatment and applying two coat of 100% Premium acrylic emulision paint having VOC less than 50 gm/littre and UV resistence as per IS 15489 : 2004, Alkali fungal resistence dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including 2 mm thick wall care putty to acheive even and smooth surfaces of wall over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete all as specified and as directed.

M&L for chipping of spalled and loose concrete and cleaning rust from re-inforcement by sand blasting scrubbing down conrete sufrace with wire brushes cleaning with water allowed to dry and applying a layer of zinc rich epoxy primer as antirust on all exposed reinforcement followed by a layer of bonding coat of approved epoxy adhesive on complete exposed surfaces of concrete to be gunited all as specified and applying two layess of guniting over steel welded mesh 2mm dia of wire and aperture 75mm,total thickness of gunite n.exc 25mm thick (average thirteen) auth cement mortar 1:2 using OPC 53 grade cement mixed with polycrete admixture @ 2% by weight of cement or as per manufacturers instructions and finally applying cement plaster over gunite surface of required thickness to give even uniform and smooth finish conforming to proper gerometrics in cement mortar (1:3) to match with the existing surface as in sides and soffits etc of slabs, chajjas, fins, facias, parapets, columns and beams etc complete including necessary scaffolding, shuttering, necessary chases to brick work or RCC members at any height upto 4 storey bldgs complete all as specified and as directed. Note: Steel welded mesh is to be tightening/welding with the existing re-inforcement. The cost of welded mesh is deemed to be included in the unit rate quoted.

S&F 750 litres capacity rotational moulded polyethylene water storage tanks white colour (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball brass valves, high pressure, with polythene float and fly- nut complete, screwed for iron pipe or brass ferrule and fixed including disamtling and removing for old 500 Ltrs capacity PVC tank complete all as specified and as directed.

S&F in repairs tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid floors, 15 mm bore of pipe complete all as specified and as directed.

S&F in repairs tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid floors, 20 mm bore of pipe complete all as specified and as directed.

S&F in repairs tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid floors, 50 mm bore of pipe complete all as specified and as directed.

Cutting of trees including cutting of trunk n.exc 30cm girth and branches and digging out roots from floor or roofs and walls of up to four storied bldg and making good the dismantled portion in cement mortar 1:3 to match the existing surfaces complete all as specified and as directed.

M&L for 100mm thick cement concrete 1:4:8, type D-2, using 40 mm graded stone aggregate in sub base complete all as specified and as directed.

M&L for machine pressed pre cast concrete inter locking paver block 80mm thick M-35 grade with grey cement and pigment & glossy finished any shape colour size over and including 50mm thick sand cushioning complete all as specified and as directed.

M&L for brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

S&F Fe-410 W (Gde E-250) quality - A Joist Channel angle, Flats etc. or Tee section fixed independently, with connecting plate etc. cut to ordinary length including welding and a coat of primer and two coat of synthetic enamel paint complete all as specified and as directed.

Taking down chowkhats or frames with shutter exc 1.5 Sqm and n.exc 4.00 Sqm each but without taking off shutters from the frame incl removing complete all as specified and as directed.

All as per Srl item No.62 above, but n.exc 1.5 Sqm each

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the primess complete all as specified and as directed.

M&L non skid coloured ceramic tiles jointless 300 x 300 x 7 to 8 mm thick, in floors etc set & jointed in neat cement slurry & pointed in coloured cement to match over and including 15mm thick screed bed in cm 1:6 for laying floor finish complete all as specified and as directed.

M&L for coloured glazed ceramic tiles 300 x 250 x 7 to 8 mm thick in dado/skirting, set and jointed in neat cement slurry & pointed in coloured cement includind 10mm thick backing coat in cement mortore 1:4 complete all as specified and as directed.

Taking down shutter of any description exc 1.00 sqm and n.exc 2.00 Sqm each and refixing the same opening including easing and adjusting the same complete all as specified and as directed.

S&F brass CP Wall mixer for mixing Hot and cold water screwed down for iron pipe complete all as specified and as directed.

Cutting holes into or through brick wall bult in cement mortar or cement lime mortar and stone walls n.exc 150 Sq.cm including making good to the original surface complete all as specified and as directed.

S&F in repairs vitreous china wash hand basin, white flat back size 550x400mm (excluding taps, waste, pipe chain and plug) but including porcelain stopper and a pair of MS bracket etc complete all as specified and as directed.

Note :- The contract sum shall be after deducting the amount of credit shown in Sch of Credit of this tender

M/S Malik Construction Corporation

amisha trading co

P R Constructions

A N BUILDERS

M/S.M.S.Devi.Const.Co

The new hut furnitures

tomar and associates

HANUMAN BUILDERS