Construction of Boundary Wall of Civil Hospital at Tohana in Fatehabad Distt.

Amount

Earth Work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.50 m, as directed by Engineer-In-Charge (HSR 4.12.1) All kind of soils

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.50 m (HSR 4.32)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: (HSR 6.1.6) 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size).

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including atached pilasters, columns, piers, abutments. Pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window skills, fillets, sunken floor etc. upto floor four level, excluding the cost of centering, shuttering and finishing (HSR 6.2.2) 1:2:4 (1 Cement : 2 Coarse Sand (Zone-III) : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering finishing and reinforcement - all work upto plinth level (HSR 6.14.1) 1:1.50:3 (Cement : 1.50 Coarse Sand (Zone-III) : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns pillars, piers, abutments, posts and struts etc. above plinth level upto floor four level, excluding cost of centering and shuttering, finishing and reinforcement (HSR 6.15.1) 1:1.50:3 (1 Cement : 1.50 Coarse Sand (Zone-III) : 3 graded stone aggregate 20 mm nominal size

Centering and shuttering including strutting, propping etc. and removal of form work for foundations, footings, bases for columns (HSR 6.29.1)

Centering and shuttering including strutting, propping etc. and removal of form work for Columns, piers, abutments, pillars, posts and struts (HSR 6.29.3)

Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level (HSR 6.33.6) Thermo-Mechanically Treated bars of grade Fe-500D or more Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement

Brick work with common burnt clay non-modular bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:4 (1 cement: 4 coarse sand) (HSR 7.21.1)

Brick work with common burnt clay non-modular bricks of class designation 7 .5 in superstructure above plinth level up to floor IV level in all shapes and sizes in Cement mortar 1:4 (1 cement: 4 coarse sand) (HSR 7.22.1)

12 mm cement plaster of mix 1 :4 (1 cement: 4 fine sand) (HSR 11.5.3)

15 mm cement plaster on the rough side of single or half brick wall of mix 1 :4 (1 cement: 4 fine sand) (HSR 11.6.1)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete (HSR 11.60)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface water thinnable cement primer (HSR 11.67.1)

Wall painting on a cement plaster surface with acrylic emulsion paint of approved brand and manufacture to give an even shade (HSR 11.71.1) two or more coats on new work

Aman Kumar