SPL REPAIR TO BLDG NO T 145 (SQUASH COURT) AND PROVN OF DISPENSARY ALONGWITH WAITING AREA FOR PATIENTS OF 179 MH AND PROVN OF TOILET AT JCOs MESS OF ENGR REGT AND AT KALIMPONG MIL STATION UNDER GE 867 EWS

Amount

Dismantling of plain or corrugated steel sheeting, any gauge and thickness including Nainital or similar pattern roof coverings, complete all as specified and as directed.

Supply & Installation Pre-painted, High Tensile 550 Mpa yield strength, Bare Galvalume Steel Sheet having maximum pitch of 250mm c/c & minimum 30mm crest depth in length as per site requirement. The galvalume sheet is to be manufactured out of 0.50mm (TCT) (Total Coated Thickness), with zinc-aluminium alloy of AZ-150. The GI based steel sheet shall have a hot dip metallic zinc-aluminium alloy coating of zinc (43.5%), aluminium (55%) & Silicon (1.5%). The profile is having return leg for proper side lap. The sheet shall be fixed using self Drilling/Self Tapping Screw with EPDM Seal all as per manufacturers specifications, complete all as specified and as directed.

Supply & Installation Pre-painted, High Tensile 550 Mpa yield strength, Bare Galvalume plain Steel Sheet. The galvalume sheet is to be manufactured out of 0.50mm (TCT) (Total Coated Thickness), with zinc-aluminium alloy of AZ-150. The GI based steel sheet shall have a hot dip metallic zinc-aluminium alloy coating of zinc (43.5%), aluminium (55%) & Silicon (1.5%). The profile is having return leg for proper side lap. The sheet shall be fixed using self Drilling/Self Tapping Screw with EPDM Seal all as per manufacturers specifications, complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillet, complete all as specified and as directed.

S&F false ceiling with powder coated exposed GI grid suspension system (E-Grid T-2430 or some equvalent load carrying capacity with mid span deflection not exc. 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long, cross Tee 1200mm/600mm long and wall angle. The main runners to be placed @ 1200mm, the cross Tee 1200mm will be inserted in the pre cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200mmx600mm Additional cross Tees of 600mm shall be placed perpendicular to the cross tee 1200mm long to finally form a grid of 600mmx600mm. Suspensor system (Grid) made out of GI sheet main Tee of size 23.5mmx38.50mmX0.36mm and cross Tee of size 23.5mmX23.5mmX0.36mm and angle size 19mmx19mmX0.36 mm. Grid of modular size 600mmX600mm shall be supported by 4 mm dia G.I wire from purlins/soffit with and including 4mm thick high pressure steam cured non asbestos fiber cement designer ceiling board (Density>1200Kg/Cum) of size 595mmX595mm, confirming IS 14862 & Type B Category III of ISO 8336, tested as per AS 1530 part 3 & BS-476 Part 4, 5, 6, 7 & 8, complete all as per manufacturer's instruction. (Make: Everest or equvalent as approved by GE), complete all as specified and as directed.

S&F rolled miled steel of joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc confirming to Fe 410-W (gde 250 quilty A), complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and as directed.

M & L for 25mm thick Cement concrete (1:2:4) type B-0, (12.5mm graded crushed stone aggregate) placed in any position, complete all as specified and as directed.

Taking down cement plaster on brick or stone masonry surfaces of walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces, rendering finished even and fair (without using extra cement), complete all as specified and as directed.

M&L for Preparation of new plastered surfaces of any description over 10 cm width or girth applying two coats of oil bound distemper using mechnical spray gun/hand rollars over a coat of interior wall primer with and including 2mm thick wall care putty in two coats (Birla white or equivalent) all as specified and directed.

M&L complete removal of existing treatment and applying two coats of oil bound distemper using mechnical spray gun/hand rollars over a coat of interior wall primer with and including 2mmthick wall care putty in two coats (Birla white or equivalent), complete all as specified and as directed.

M&L 20 mm thick rendering (in two coats 10mm+10mm) on fair faces of brick work or concrete surface in cement mortar (1:4) on external wall finished even and fair without using extra cement mixed with integral water proofing compound @ 2% by weight of cement in 2nd coat or in the manner specified by the manufacturer and in the proportions indicated, complete all as specified and as directed. Note:-WPC will be measured and paid separately as supply only.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and as directed.

M&L for complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surface, complete all as specified and as directed.

Supply only integral water proofing compond, complete all as specified and as directed.

M&L for 75 mm thick PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection/ path laid slope of 1 in 12 and finshing cement concrete surface even and smooth without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering of exposed edges or, complete all as specified and as directed.

M&L for 75 mm thick Cement concrete (1:3:6) type C 2, (using 40 mm graded crushed stone aggregate) in sub base of flooring, complete all as specified and as directed.

Demolition of brick work or stone/boulder masonary buit in cement mortar including all quions ,arches ,pillars etc but excluding ashler facing dressed stone work and precast concrete, complete all as specified and as directed.

M&L for brick work with old size fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar (1:4), complete all as specified and as directed.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including cutting of reinforcement as required to facilliate demolition, complete all as specified and as directed.

M&L for RCC Nominal Mix (1:2:4) Type B1, (20 mm graded crushed stone aggregate) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass, complete all as specified and as directed.

M&L for RCC Nominal mix (1:2:4) type B1 (20mm graded crushed stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and as directed.

M&L for RCC Nominal mix (1:2:4) type B1 (20mm graded crushed stone aggregate) as in Chajjas, complete all as specified and as directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundationand plinth beams; and similar work; vertical or to batter, complete all as specified and as directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. of rough finished surfaces, complete all as specified and as directed.

M&L for Use & Waste of formwork to Chajjas, chullah hoods, troughs and similar items including edges rough finished surfaces, complete all as specified and as directed.

M&L for Machine cut Kota stone slab flooring 17-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding rubbing and polishing and exposed edges of kota stone shall be rounded complete over and including 20 mm thick screed bed or bedding layer in CM (1:6) finished even and rough, complete all as specified and as directed.

M&L for Machine cut Kota stone slab as in vertical surfaces such as dado/skirting, 17-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding rubbing and polishing and exposed edges of kota stone shall be rounded complete over and including 15 mm thick backing plaster in CM (1:4) finished even and rough, complete all as specified and as directed.

S&F of TMT bars 10 mm dia and over, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and as directed.

S&F of TMT bars 6mm to 8mm dia as in stirupps cut to length , bent to shape required , including cranking, bending spirally for hooping for lintels and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and as directed.

M & L TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

M&L 5 mm thick rendering on fair faces of brick work or concrete surface in cement mortar (1:3) on chajjas finished even and smooth without using extra cement, complete all as specified and as directed.

S&F in repairs 25mm dia curtain rod (curtain rails), alumunium alloy, powder coated with and including decorattive knobs etc, complete all as specified and as directed.

M&L preparation of old steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and as directed.

Taking down chowkhats or frame exc 1.50 and not exc 4 sqm each with shutter (without taking off shutters from the frame), complete all as specified and as directed.

Taking down chowkhats or frame not exc 1.50 sqm each with shutter (without taking off shutters from the frame), complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles a PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; both side Prelam PVC sheet used instead of Plaincolour PVC sheet. Stile and rails feathered at edges beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet used reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and as directed.

S & F 100 mm butt hinges, heavy weight, cold rolled mild steel, and fixed hinge, complete all as specified and as directed.

S&F 150 mm long aluminium, anodised, barrel tower bolt, of extruded section and fixed, complete all as specified and as directed.

S&F 125 mm size Aluminium handles, cast type, anodised and fixed, complete all as specified and as directed.

S&F 150 mm size Aluminium handles, cast type, anodised and fixed, complete all as specified and as directed.

S&F Mild steel barrel tower bolts 200 mm, stove enamelled black, with bright bolt and fixed, complete all as specified and as directed.

S&F of 250 mm long aluminium alloy, anodised sliding door bolts with haps staple(bolt type), and fixing clips of sheet, cast or extruted sections and fixing bolt and sliding bolts of extruted sections or cast aluminium alloy and fixed, complete all as specified and as directed.

S&F of 300 mm long aluminium alloy, anodised sliding door bolts with haps staple(bolt type), and fixing clips of sheet, cast or extruted sections and fixing bolt and sliding bolts of extruted sections or cast aluminium alloy and fixed, complete all as specified and as directed.

S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares nexc 0.5 sq. m in each pane, complete all as specified and as directed.

Demolition and breaking up old broken , PVC (SWR) , Cast Iron, AC, SWG soil waste and vent pipe of 75/110 mm bore including accessories set in cement mortar and removing rubbish from site, complete all as specified and as directed.

S&F of 110 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

S & F PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joint laid in trenches or in floor (ISI Marked ), complete all as specified and as directed.

S&F of 75 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

S&F of 110 mm bore PVC (SWR) bend any radius with access door, complete all as specified and as directed.

S&F of 110 mm bore PVC (SWR) bend any radius, complete all as specified and as directed.

S&F of 75 mm bore PVC (SWR) bend any radius with access door, complete all as specified and as directed.

S&F of 75 mm bore PVC (SWR) bend any radius, complete all as specified and as directed.

S&F PVC (SWR) branch pieces 75 mm (Single Y) equal or unequal, complete all as specified and as directed.

S&F PVC (SWR) branch pieces 110 mm (Single Y) equal or unequal, complete all as specified and as directed.

S&F of 110 mm bore PVC (SWR) junction single (Single T) equal or unequal with access door jointing with solvent cement, complete all as specified and as directed.

S&F of 75 mm bore PVC (SWR) junction single (Single T) equal or unequal with access door jointing with solvent cement, complete all as specified and as directed.

S&F of 110 X 75 mm bore PVC (SWR) reducer including jointing with solvent cement, complete all as specified and as directed.

S&F of 75 mm bore PVC (SWR) vent cowl including jointing with solvent cement, complete all as specified and as directed.

S&F in repair 15 mm bore PVC connection 450 mm long with two brass chromium plated brass nuts and PVC washers, complete all as specified and as directed.

S&F in repairs angle , stop valve 15 mm bore, chromium plated, fancy type, with wall flange, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.

Taking up or down 15 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site, complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth, complete all as specified and as directed.

S&F of 15 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc) and fixed complete to wall and ceiling or laid in/on floor, complete all as specified and as directed.

Taking up or down 20 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site, complete all as specified and as directed.

S&F of 20 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor, complete all as specified and as directed.

S&F in repair 15 mm bore chromium plated bib tap fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed.

S&F in repairs brass chromium plated tubular towel rail of 20mm dia D' type 60cm long between flanges, complete all as specified and as directed.

S&F in repairs 75 mm size PVC (SWR) floor trap plain with grating including jointing with solvent cement, complete all as specified and as directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed.

S&F in repairs Soap dish, CP, fixed to plugs with chromium plated brass screws, complete all as specified and as directed.

S&F of PVC low level flushing cistern 10 Ltr capacity, valveless syphonic action type complete with inlet, ball valve, float valve, bends brackets, rawl plug, brass screws handle etc complete having BIS description mark with IS-2731 with and including suitable size of MS brackets, plug, screw all as required incl taking down existing high level/low level flushing cistern any type disconnecting pipes and jointing with new one etc, and making good the floors/walls as per existing floor finish/wall finish including 32 mm bore PVC flush pipe and jointing with water closet of any type, complete all as specified and as directed.

S&F Vitrous china wash down water closet pan pedestal pattern white, exlcuding fixing bolts, flushing cistem & Flush pipe including PVC Seat Cover white recess bottom type mild steel chromium plated or aluminium hanging device, including dismantling existing, complete all as specified and as directed.

S&F Vitreous China wash basin, flat back, size 550x400 mm white, excluding taps, waste, chain and plug and rcelain stopper but including brackets, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

M & L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in CM (1:6), complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 20 mm thick screed bed in cement mortar (1:6), complete all as specified and as directed.

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surfaces of tile over and including 10 mm thick rendering in cement mortar (1:4), complete all as specified and as directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

M&L preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red, complete all as specified and as directed.

S&F for Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and as directed.

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc, complete all as specified and as directed.

S&F Anodised aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21, 100mm long (2 no.) suitable handle (1no.), complete all as specified and as directed.

Taking down, chipping and removing the loose spailt, damaged cement concrete, cement mortar surfaces of RCC columns, beams, walls, chajjas etc and exposing the reinforced cement concrete ,wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface, wash with clean water for removing all rusts from the old reinforcement bar surfaces, fixing new reinforcement, cut to lenghts, bend to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia for stregthen the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of water, Nitbond SBR (Latex) and cement in ratio (1:1:3) slurry as bond coat after that applying ready mix polymer mortar, 30 mm average thick in any number of coats, to provide at least 30mm thick cover to reinforcement, finished the surfaces even and fair including erecting and dismantling scafolding for carrying out the work, complete all as specified and as directed. Make of Epoxy Ready made Mortar and Epoxy chemicals -Fosrock/ Dr Fixit/ Sunanda/Sika. Note :- (i) New reinforcement will be measured and paid seperately (ii) Cost of fixing of new reinforcement by welding/binding with old reinforcement and providing, errecting and dismantling scaffolding shall deemed to be included in quoted rates.

S&F Welded steel wire fabric cut to length. Fixed to steel members/ reinforecement steel, weigh per Sqm n exc 4 Kg, complete all as specified and as directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed.

M&L Cutting opening in cement concrete walls (any descript-ion) for door, window and other openings (with or without reveals) or enlarging existing openings,including trimming surfaces to receive rendering, etc. with or without reinforcement, complete all as specified and as directed.

M&L for 4.8mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane, complete all as specified and as directed.

M&L for Double action floor spring M&L for hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass,other parts made of mild steel heavy duty and fixed, complete all as specified and as directed.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil, complete all as specified and as directed.

Surface dressing n exc 15 cm deep and getting out in soft/loose soil all as specified and as directed (Including Site Clearance), complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, trenches, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil, complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, trenches, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/ Dense soil, complete all as specified and as directed.

Returns, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick with soils or hard/ Dense soil, complete all as specified and as directed.

Removing excavated material n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point in soils, complete all as specified and as directed.

M&L removing excavated material exc. 250 m but n exc. 500 m and depositing where directed, complete all as specified and as directed.

M&L brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6), complete all as specified and as directed.

M&L for brick work with fly ash bricks, straight or curved on plan to any radius in half bk wall built in CM (1:4), complete all as specified and as directed.

M & L PCC (1:4:8) type D-2 (Using 40 mm grade crushed stone aggregate) in foundation, filling and mass concrete, complete all as specified and as directed.

M & L for Reinforced cement concrete (Design mix) M-25 (20 mm graded aggregate) as in Foundation,incl raft,footing,foundation beam,plinth beam,base for columns and mass concrete, complete all as specified and as directed.

M & L for Reinforced cement concrete (Design mix) M-25( 20 mm graded aggregate) as in beams,cantelivers,bressmers,lintel over 1.5m span, complete all as specified and as directed.

M & L for Reinforced cement concrete(Design mix) M-25( 20 mm graded aggregate) as in Columns, pillars, piers, posts and struts, complete all as specified and as directed.

M & L for Reinforced cement concrete(Design mix) M-25( 20 mm graded aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and as directed.

M & L for Reinforced cement concrete(Design mix) M-25( 20 mm graded aggregate) as in chajjas, complete all as specified and as directed.

M&L for Reinforced cement concrete(Design mix) M-25( 20 mm graded aggregate) as in beams, cantilevers,lintels, columns pillars,piers, posts, struts,chullah hoods, stair case,arches, domes, vaults,shell roofs, arch ribs,folded plates, slabs,balconies, canopies, deck slabs etc. or in similar articles, complete all as specified and as directed.

M & L for form work to sides of concrete foundations, footing, bases of columns raft and raft beams, side of soffits ( if any) of foundation and plinth beams and similar work; vertical or to batter, rough finished surface of concrete flat, complete all as specified and as directed.

M & L for Form work to sides of pillars, posts, struts, piers, columns and stanchions of square rectangular or poligonal rough finished surfaces of concrete, complete all as specified and as directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished surfaces of concrete, complete all as specified and as directed.

M & L for Form work to edges of concrete flats, treads, breakes in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm nut n exc 20 cm wide, complete all as specified and as directed.

M & L Damp proof course 40 mm thick in cement concrete (1:2:4) Type B-0 to horizontal or vertical surfaces including necessary form work, complete all as specified and as directed.

M&L for 5 mm thk in CM (1:3) in ceiling finishing the surfaces even and smooth without using extra cement, complete all as specified and as directed.

M&L for three coats of white wash on new plastered surface including prepration of wall surface, complete all as specified and as directed.

M&L preparation of newly plastered surfaces of ceiling and applying three coats of white wash on ceiling, complete all as specified and as directed.

M&L broken stone or boulder hard core of gauge exc 63mm but not exc 100mm, deposited spread and levelled n.exc 15 cm thick, waterd and rammed to a true surface, complete all as specified and as directed.

Moorum/red bajri filling in floors or pavings, ladi in layers n exc 15 cm thk, spread, levelled and rammed incl watering, complete all as specified and as directed.

S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and as directed.

S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded, complete all as specified and as directed.

S&F galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and as directed.

S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares nexc 0.5 sq. m in each pane, complete all as specified and as directed.

S&F Pressed steel frames of size 165x60mm for doors with one or more rebated including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and as directed.

Preparation of new wooden surfaces, not otherwise described over 10 cm width or grith and applying two coat of synthetic enamel paint over one coat pink primer, complete all as specified and as directed.

S&F 35 mm thick second class hard wood, plain, framed panelled shutters (any number of panels), with panels of 12 mm thick timber flat on both sides (feather edged), or of 12mm thick veneered particle board medium density wood particle board with commercial face veneers, complete all as specified and as directed. (Note :- The dimension of the various components or parts of shutters shall be as specified in clause 8.24 (a) of MES SSR 2009 Part I)

S&F 35mm thick second class hardwood, Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and as directed.

S&F mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars,barred iron doors, ladders, framed balusters, walk ways, railings and similar work confirming to Fe-410-0 or Fe 310-0, complete all as specified and as directed.

M/L for 15mm thick rendering in CM (1:3) on other than fair faces of brick or concrete surfaces finished even and smooth with WPC, complete all as specified and as directed. (WPC measured separately).

M & L for Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etc., and surface painting, with a layer of blown grade bitumen of any penetration applied hot @ 1.7 kg per sqm, complete all as specified and as directed.

M & L for water proofing treatment with 3mm thick APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application, complete all as specified and as directed.

M&L PCC (1:3:6) Type C1 using 20mm stone aggregate as in plinth protection, complete all as specified and as directed.

S&F for structural steel work as in roof trusses (framed), trussed, purlins, framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe-290 (Gde E?165), complete all as specified and as directed.

M&L for preparation on newly plastered/previously untreated surfaces of wall and applying two coats of cement base paint, complete all as specified and as directed.

S & F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) Water closet (Squatt pattern) com plete including provision of lime concrete bedding, complete all as specified and as directed.

S & F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specified and as directed.

S & F PVC valve less , syphonic action type flushing cistern 10 ltr capacity low level, whit, with inlet, ball valve float, flush pipe and handle including brackets, low level fluslhing cistern (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever, if any, complete all as specified and as directed.

S & F bib taps 15mm bore cast copper alloy chromium plated with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed 15mm bore, complete all as specified and as directed.

S & F Grating doom 100mm dia of PTMT (Minimum weight 25gms), complete all as specified and as directed.

S&F Vitreous China wash basin, flat back, size 450x300mm white, excluding taps, waste, chain and plug and rcelain stopper but including brackets, complete all as specified and as directed.

S&F Stop cock 15 mm bore cast copper alloy screwed down high pressure fancy type, chromium plated with long shank and cup (concealed type), complete all as specified and as directed.

M &L PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and as directed.

M&L for concealed point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLSH cable, 1100 volts grade, ISI marked with multi stranded copper conductor with proper colour coding drawn through and including PVC conduit (medium grade) with all fittings and accessories ISI marked incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLSH, ISI marked as earth continuity conductor (green in colour) connected to common earth dolly incl fixing of MS terminal boxes of suitable size with cover plate and frame for mounting switch, sockets etc including cutting chases for conduits & sinkings for modular boxes & making good the disturbed surfaces for one light point controlled by one, one way switch 5/6 Amps, complete all as specified and as directed.

Description all as per item No 142.00 here in before but for one 3 point 5/6 Amps switch socket outlet point controlled by one switch on the same board, complete all as specified and as directed.

Description all as per item No 142.00 here in before but for one 3 pin 5/6 Amps switch socket outlet point controlled by one switch on independent boad, complete all as specified and as directed.

Description all as per item No.142.00 here in before but using 2.5 Sqmm size FRLSH copper conductor cable for one 16 Amp socket outlet on independent board, complete all as specified and as directed.

Supply and fix Modular switch 1 way 6 A,1 module 230 Volts,50Hz, ISI marked, complete all as specified and as directed.

Supply and fix Modular switch 1 way 16 A,1 module 230 Volts,50Hz, ISI marked, complete all as specified and as directed.

Supply and fix Socket, 6A-2/3 pin combined 2 module 230 Volts,50Hz, ISI marked, complete all as specified and as directed.

Supply and fix Socket, 6A/16A-2/3 pin combined 2 module 230 Volts,50Hz, ISI marked, complete all as specified and as directed.

Supply & Fixing ceiling rose surface bakelite 65 X 50 mm three terminal, complete all as specified and as directed.

Supply and fixing lamp holder insulated body with back plate for batten fitting with 10W LED bulb all as specified and as directed, complete all as specified and as directed.

Supply and fixing LED batten surface / wall mounted with specially designed powder coated aluminium housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption 20W, system efficiency of ≥100 lumens/W, Ingress protection IP 20, colour rendering index CRI>80, driver efficiency >85%, power factor > 0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50,000 burning hrs (min) as per L7O criteria,operating voltage range 150-270V AC, complete all as specified and as directed.

Supply and fixing LED light fitting 1x9W/1X10W IP66 & IK09 integral LED Bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed.

Supply and fixing in Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral link, 8 way 240 Volts AC concealed in wall, complete all as specified and as directed.

Supply and fixing in Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 100 Amps rated Single pole and neutral link,4 way 240 Volts AC concealed in wall, complete all as specified and as directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of DP 32 Amp and current carrying capacity in the MCB DB complete with connection testing and commissioning, complete all as specified and as directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of DP 16 Amp and current carrying capacity in the MCB DB complete with connection testing and commissioning, complete all as specified and as directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning, complete all as specified and as directed.

Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground (earth pit not less than 2.25m deep bellow ground level) with top edge of the plate not less than 1.5m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts, nuts, check nuts and washers, and connected to equipments as directed, including funnel with GI med grade watering pipe 20 mm bore, wire mesh, charcoal or coke and common salt in alternate layers of 15cm compacted thickness all around the earth electrode, with concrete pit in PCC (1:3:6) type C-1 , 50 mm thick pre cast RCC (1:2:4) type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar ,GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES SSR Part-I, complete all as specified and as directed.

Taking down unserviceable copper/aluminium point wiring of any description including all fittings (switch, socket, switch socket combination, lamp holder, ceiling rose, regulator etc.) and making good disturbed surfaces of wall, floor etc. to match with existing finishes, complete all as specified and as directed.

Dismantling and taking down unserviceable main switches, DBs including sub main wiring etc. any type / size and making good disturbed surfaces to match with the existing finishes, complete all as specified and as directed.

M & L for concealed point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLSH cable, 1100 volts grade, ISI marked with multi stranded copper conductor with proper colour coding drawn through and including PVC rigid conduit (medium grade) with all fittings and accessories ISI marked incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLSH, ISI marked as earth continuity conductor (green in colour) connected to common earth dolly incl fixing of MS terminal boxes of suitable size with cover plate and frame for mounting switch, sockets etc including cutting chases for conduits & sinkings for modular boxes & making good the disturbed surfaces for one light point controlled by one, one way switch 5/6 Amps, complete all as specified and as directed.

Description all as per item No 162.00 here in before but for one 3 pin 5/6 Amps switch socket outlet point controlled by one switch on same board, complete all as specified and as directed.

Description all as per item No 162.00 here in before but for one 3 pin 5/6 Amps switch socket outlet point controlled by one switch on independent board, complete all as specified and as directed.

Description all as per item No.162.00 here in before but using 2.5 Sqmm size FRLSH copper conductor cable for one 16 Amp socket outlet on independent board, complete all as specified and as directed.

Supply and fixing LED retro fit lamp B-22 holder base with poly carbonate body and aluminium heat shrink of 10W, complete all as specified and as directed.

Supply and fixing LED batten surface / wall mounted with specially designed powder coated aluminium housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption 10W, system efficiency of ≥100 lumens/W, Ingress protection IP 20, colour rendering index CRI>80, driver efficiency>85%, power factor >0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50,000 burning hrs (min) as per L7O criteria,operating voltage range 150-270V AC, complete all as specified and as directed.

Supply and fixing LED tube lights fitting, 4 feet long 1x 18W, 220V, AC decorative box type with holder including Removable poly cabonate LED tube light with inbuilt driver connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed.

Supply and fixing LED tube lights fitting, mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorativetype with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete including taking out old unserviceable fitting, complete all as specified and as directed.

Supply and fixing Highbay light 64W, correlated color temprature (Nom) 5700 K, Luminous Efficacy (rated) 160im/W, colour rendering index (CRI) ≥ 70, Beam angle of light source90 degree(s), Input Voltage 120 to 277 V, Line Frequency 50 HZ, Power consumption 64 W, Power factor 0.95, Protection class IEC safty class I, Surge Protection (Common/Differential) 6/6 kV including Hanging arrangement with suitable clamps and rod, complete all as specified and as directed. Make : Cat Part No BY615P LED 100S 5700 WB PSU GR of philips or equivalent model of Havells/Bajaj/Crompton.

Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, complete all as specified and as directed.

S&F of Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 250mm complete all as specified and as directed.

S&F of Exhaust fan 250 mm sweep, PVC body, AC, single phase, 230 Volts, including connection with 1.5 sqmm mutistrand copper conductor flexible wire from ceiling rose, including outside louvers with proper hole, and necessary fixing arrangement, complete all as specified and as directed.

M & L in repairs for sub main wiring along with earth wire of size 1.5 sqmm + one runs of 1.5 sqmm earth wire singlt core PVC insulated cable with stranded copper conductor FRLS including drawing into 25 mm rigid non-metallic PVC conduit conclealed in wall/roof, including taking out old unserviceable sub main wiring, complete all as specified and as directed. (Note : Three run of 1.5 Sqmm including one run of 25 mm rigid non-metallic PVC conduit shall be measured as one unit length)

M & L for sub main wiring with two runs of PVC insulated and unsheathed FRLSH copper conductor single core multi stranded of size 2.5 sqmm (for Phase and neutral) and one run of earth continuity conductor of size 2.5 sqmm multistranded copper conductor FRLSH 1100V conforming to IS:694 (2010) with necessary fixing arrangements using approved colour coding as per IS drawn through 25mm PVC casing caping on surface of wall/roofI, bends, tee, elbow etc., and making good the disturbed surface, complete all as specified and as directed. (Note Three run of 2.5 Sqmm including one run of 25 mm of size casing caping shall be measured as one unit length).

Supply and Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables of Size of 10 Sqmm 2 core (heavy duty) 1100 Volts grade with stranded aluminium conductor on wall/in Trench with the help of shadel, complete all as specified and as directed.

M&L for sand cushioning to U/G cable in layers in trenches, complete all as specified and as directed. Note :- Only Puned layers shall be measured for payment

M&L Sub class ‘B’bricks for covering to cable laid dry flat ,with width equal to the length of brick, complete all as specified and as directed.

S & F Steel pipe glavanized light grade of 40 mm dia laid in trenches or under ground/floor or road of fixed with pole for protection of cable/ Earth sstrip including clams with bolts nuts and wasers, complete all as specified and as directed.

M&L for GI tubing 25 mm dia Medium grade with all fittings laid in trenches or fixing in wall, complete all as specified and as directed.

M&L for GI tubing 20 mm dia Medium grade with all fittings laid in trenches or fixing in wall, complete all as specified and as directed.

Supply and Fix Rotational moulded poly-ethylene water storage tanks (cylindrical vertical closed top) 750 Lts Capacity icluding suitable outlet tank ipple and locking arrangements hoisted and fixed in position, complete all as specified and as directed.

Cutting, screwing, threding and fixing GI tubing for alteration or addition size of 25/ 23 mm dia GI tubing, complete all as specified and as directed.

S&F for Gun metal gate valve, with iron wheel head, screwed both ends for iron pipe and fixed suitable for 25 mm dia GI tubing, complete all as specified and as directed.

S&F for Gun metal gate valve, with iron wheel head, screwed both ends for iron pipe and fixed suitable for 20 mm dia GI tubing, complete all as specified and as directed.

M&L for cement concrete (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete including finished even and smooth (without using extra cement), complete all as specified and as directed.

S & F of PVC float valves high pressure with polythene float and flynuts complete screwed for iron pipe or PVC ferrule and fixed of size 25mm bore in repairs, complete all as specified and as directed.

Note : In case of doubling/duplicancy of BOQ items, the lowest quoted rate shall be applicable for payment.

SUNIL PRADHAN (BID ID -3328905)

APARAJITA GROUP OF CONSTRUCTION (BID ID -3328995)

MS BRAHMA CONSTRUCTION (BID ID -3328982)

PRASAD PRADHAN AND SON (BID ID -3328928)

RAMESH GURUNG (BID ID -3328911)

DEEP CHANDRA JOSHI (BID ID -3328953)

MS MAYA PRAKASH GOEL AND SONS (BID ID -3328940)