SPL REPAIR TO BLDG NO P-31 DS (1 TO 5), P-31F (1-12), P-31SS, P-31SP, P-31G1 AND P-31G2 OF 125 SATA REGT AND PROVN OF DRAIN NEAR BLDG NO 42 AT 312 NW SIGN COY (31NW SIG REGT) UNDER AGE B/R-I OF GE (E ) JRC

Amount

Demolition of cement concrete of any description and in any position and removing surplus spoil out of defence land where directed at a level not exc 1.5 m above the starting point, complete all as directed

M&L for 50mm PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate as in plinth protection and path finishing the surfaces even and smooth without using extra cement all as specified

M&L for 40mm thick PCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in floor topping; concrete surface finished even & smooth without using extra cement complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as directed.

M&L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm, but not exceeding 1.00 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and incl. 15mm thick cement screed bedding layer in cement mortar 1:6 complete all as specified and directed. Make:- Kajaria/ Somany/ Orientbell.

Ditto all as per Srl Item No. 5 above, but on vertical surfaces such as skirting etc over and including 10 mm thick cement plaster finished even and rough to receive tiles in cement mortar (1:4) complete all as specified

M&L for non skid joint free ceramic coloured tiles (premium quality) of area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm and 6-7 mm thick in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed. Make:- Kajaria/ Somany/ Orientbell.

Ditto all as per Srl item No. 7 above, but on vertical surfaces such as skirting etc over and including 10 mm thick cement plaster finished even and rough to receive tiles in cement mortar (1:4) complete all as specified

M&L for coloured glazed tiles (premium quality) of size 300x450x6-7mm thick fixed with neat cement slurry in vertical surface to wall pointing in white/coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. Make:- Kajaria/ Somany/ Orientbell.

M&L for Chequered cement concrete tiles 25 cm x 25 cm x 20 to 22 mm thick, with grey cement and pigment, set jointed and pointed in neat cement slurry in floor laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified.

M&L for 20 to 25mm thick machine cut kota stone slab 550mm x 550mm size on floor top, step etc over and incl 20mm thick bedding layer CM 1:6 in roughening of old concrete floor surfaces by picking , sweeping clean and washing down with water to remove dust including brushing neat cement slurry with 3 kg/sqm with pigments to match the shade of slab including cutting , rubbing and mirror/granite finish polished complete all as specified and directed

Ditto all as per Srl Item No. 11 above, but on vertical surfaces such as skirting, dado, riser etc over and incl 15mm thick cement plaster in CM 1:4 rough finisher surface to received kota stone complete all as specified and directed

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, shelves in cupboard, hand wash places and like including necessary cutting and grooving to walls and making good by cement mortar(1:4) including pointing in cement mortar (1:2) using admixture of pigment to match with shade of granite over and including cement screed bed Cement Mortar (1:6) 15 mm thick colour of granite as approved complete all as specified and directed

Demolition of reinforced cement concrete of any description not exc 15 cm thickness (reinforcement to cut as required to facilitate demolition), complete all as directed.

M&L for reinforced cement concrete nominal mix type B-1 1:2:4 (20 mm graded aggregate) slab supported on wall, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as directed.

M&L for MS TMT bars 10 mm and over dia and cut to length, bent to shape required incl cranking bending spirally for hooping for column hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.

M&L for form work to soffits to suspended slabs, floor slabs, shelves, landings and similar work, not exceeding 200 mm thick (horizontal or slopping) rough finished surfaces of concrete flat or shelfs etc. complete all as specified and directed

M&L for form work to edges of concrete flats, breaks in floors, window cills, concrete railings, floor and roofs n.exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work all exceeding 10cm but not exc 20 cm wide rough finished surfaces of concrete all as specified

S&F in repairs Vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern) incl seat cover and flushing pipe for pedestal pan, including all joints complete all as specified and directed

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed

S&F in repair chromium plated Jet for EWC 600mm long tube superior quality all as specified and directed.

S&F Toilet paper holder of Chromium plated fixed to walls with chromium plated (CP) brass screws, all as specified and directed

S&F in repair PVC valveless, syphonic action type flushing cistern low level, white, with inlet, ball valve, float and handle, 10 ltr capacity including brackets complete all as specified and directed

S&F in repair for Vitreous china wash hand basin, white flat, oval shape fitted in granite platform and waste coupling and waste pipe of any size complete all as specified and directed

S&F Vitreous china wash hand basin, white, flat back 550x400mm including brass CP waste coupling, 32mm dia, PVC waste pipe with PVC connection , brackets 2 Nos including cutting for and pinning in ends of brackets fixed in repair, complete all as specified and directed

S&F CP Bib tap cast copper alloy suitable for 15mm bore iron pipe with long body fancy type complete fixed in repair complete all as specified and directed.

S&F in repair Pillar tap, brass with capston head, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or cold with long screwed for 15mm bore iron pipe and fixed complete all as specified & directed

S&F brass chromium plated tubular towel rail 20 mm dia , D type 60 cm long between CP flanges all as specified

S&F in repair Acrylic corner set of 3 pieces complete all as specified and directed

S&F Corner glass shelf with bracket complete all as specified and directed.

S&F brass chromium plated shower rose of 75mm size, with or without swivel joints including fixing to steel pipe or union fixed in repairs complete all as specified and directed.

S&F in repair CP grating 125mm dia with centre hole all as specified and directed by Engr-in-Charge

S&F 15mm stop valves, fancy type, cast copper alloy, chromium plated screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and directed.

S&F PVC connection fibre, reinforced 45cm long with brass check nut and PVC washers at both ends complete all as specified and directed.

S&F rotational moulded synthetic (HDPE), water storage tank 1000 litre capacity white colour triple layer antimicrobial (Cylindrical vertical with closed top), hoisted & fixed in position all as specified in SSR Part-I, including dismantling of existing water tank complete all as specified and directed. Make:- Sintex (Pure)/ Sheetal/ Rotex as approved by GE.

S&F 15mm Brass CP mixer for mixing hot & cold water for WHB with all fittings screwed down for iron pipe complete all as specified and directed.

S&F 15mm Brass CP wall mixer for mixing hot & cold water for bathrooms with all fittings screwed down for iron pipe complete all as specified and directed.

M&L for galvanised iron water tubing 15 mm bore, medium grade with & including all fittings fixed to wall, and or laid in floors etc including taking down the existing tubing complete all as specified

M&L for galvanised iron water tubing 20 mm bore, medium grade (ISI marked) with & including all fittings fixed to wall, and or laid in floors etc including taking down the existing tubing complete all as specified

Dismantling of brick tiles single layer as in roof covering complete all as directed.

Demolition of mud in roofs any thickness including plastering and leeping (whether full thickness removed or only a part there of) all as directed.

M&L for PCC (1:2:4) type B-0 (using 12.5 mm graded crushed stone aggregate) as in benching, roof padding, roof kerbs or mud stops, coping etc rounded or chamfered on edges complete all as specified and as directed.

M&L for 10mm thick cement plaster with WPC in cement mortar 1:3 on concrete roof surfaces finished even and fair, complete all as specified and as directed

M&L for Bitumen Primer applied on plastered surface of roofs at the rate of 0.40 Kg/Sqm of Surface area of roof for use in water proofing and dump proofing treatment complete all as specified and as directed.

M&L for painting the roof surface with a coat of hot blown paving industrial bitumen 85/25 as a bonding material in two coats one on primed surface & 2nd on APP based polymeric membrane at the rate of 1.20 kg/sqm all as specified

M&L for APP based polymeric membrane minimum weighing 3 Kg/sqm and minimum 3mm thick reinforced with five layer polyster non wove fabric (wt. Not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified

M&L for 40 mm thick brick tiles with 15 mm thick bedded layer of 1:3 CM laid on 2nd bitumen coated surface and joints grouted flush mortar 1:3 mixed with 5% of crude oil by weight of cement, complete all as specified .

Ditto all as per Srl item No. 48 above, but except tiles

M&L for cutting out cracks to V-section in existing RCC roof slabs or terracing, cleaning out & filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) all as specified

M&L for flush pointing in cement mortar 1:3 on brick tiles laid flat on roof and wall surfaces complete all as specified

Demolition and braking up drain pipes AC/PVC pipe in event n.exc 150 mm dia including all fittings complete all as specified and directed

S&F for 110 mm PVC (SWR) Rain water pipes single socketed in any length with rubber ring joints fixed to walls and floors complete all as specified and directed.

S&F PVC (SWR) bends 110 mm dia complete all as specified and directed.

S&F for 110mm PVC (SWR) vent cowl complete all as specified and as directed.

Taking down chowkats or frame not exc. 1.5 sqm each with shutters (without taking off shutters from the fames) complete all as specified

Taking down chowkats or frame exc. 1.5 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the fames) complete all as specified

M&L for anodized aluminium powder coating (minimum thickness of powder coating 50 micron) door shutter having 150mm x 44mm x 2.85 mm thick bottom rail, 150 mm x 44mm x 3mm thick middle rail, 100mm x44mm x2.85 mm thick stile and top rail including necessary fitting joinery cleat, glazing packing snap beading 10 mm x 10 mm ,powder coated aluminium handle 200 mm long (02 Nos), 3 Nos 100 mm size chromium plated butt hinges, 2 Nos 200mm size Aluminium tower bolt and double action floor door spring hydraulically regulated including frame of section 100 mm x 44 mm x2.85 mm and door shutter, 5mm thick tinted glass and pattern, 100mm Mortice latch with two levers brass body (Make : Harrison) and fixing including taking down of existing chowkat with Shutter complete all as specified and directed. Make of Aluminium Section : Hindalco/Jindal

M&L for anodized aluminium powder coating (minimum thickness of powder coating 50 micron) window/ventilator shutter sliding type having 75mm x 44mm x 2.85 mm thick stiles bottom rail and top rail including necessary fitting joinery cleat, glazing packing snap beading 10 mm x 10 mm , 2 no of anodized aluminium handle 150 mm size etc including frame three track of section 100 mm x 44 mm x 2.85 mm and including 5.00 mm thick tinted glass and including aluminium deco grill 50mmx50mm mesh size and 5.5mm thick and fixing including taking down of existing chowkat with shutter complete all as specified & directed. Make of Aluminium Section : Hindalco/Jindal

S&F steel windows 1.25 mm thick Box type (primer coated) ERW hollow 'P' section of size 60 mm x 25 mm single rebated comprises of glazed shutter EWR sec 50 mm x 20 mm and 1 mm thick and two openable leaf consisting two Nos sash bar of 'T' section 20 mm x 3 mm complete welded to frame with one vertical mullion of EWR bot 'T' section of size 60 mm x 25 mm and 1.25 mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1, four Nos for each window including following fittings welded to failed shutter:- (a) Holdfasts 150 mm long 12mm x 3 mm made to shape- 4 Nos per window (b) Handle of Z sec 20 mm x 25 mm, 100 mm long - 1 nos per leaf. (c) MS tower bolt 150 mm long - 2 Nos per leaf. (d) 'Z' sec 20 mm x 25 mm , 100 long stopper-01 Nos per leaf, (e) Cleat 55mm long of hollow square 15 mm x 20 mm x 63 mm welded to hinges - 1 Nos per leaf (f) MS pintal hinges of size 75 mm x 12 mm - 2 Nos per leaf. (g) fabrication and fixing arrangement complete. Note:- Grill / guard war , glass pane shall be measured and paid separately

Ditto all as per Srl Item No. 60 abov,e but in gauged shutters without sash bars all as specified and directed

S&F framed work such as grills, gratings, etc .with ends of bars shouldered and/ or riveted , or forget into spikes ; framed guard bars parallel iron doors and similar work conforming to Fe.290.Gde-E-165 complete all as specified

S&F galvanized mild steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tinned tacks complete all as specified and directed

M&L for 3.00 mm thick glass sheet, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed

S&F PVC solid door frame of size 50mm x 47mm made out of 5 mm wood grain printed PVC sheet and edges will be painted to be matched with shutter, reinforced with MS square tube, as per specification and drawing in SSR Part-II complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutters with particle board core, 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front Face & 2mm Prelam PVC sheet on back face all as per specification & drawing.

S&F 30mm thick factory made PVC Flush Cup board shutter consisting of panel of hollow section thickness . Consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm inserted inside the hollow section of stiles. top and bottom rails and two 19mm x 19mm MS tubes inserted horizontally inside the hallow profile section at an equal distance from top and bottom of door and fixed with hallow profile section using 5mm thick PVC sheet using screws Hollow PVC profile shall be lipped with 10 mm ( 5mmx 2) thick x 20mm width on stiles and rails using solvent cement . The inner panel shall be laminated with 5mm thick thick termite proof, water proof and fire retardant Prelam PVC sheet using solvent cement on both the sides of the panel etc. Complete all as specified as per direction of Engineer-in-Charge

S&F 100mm butt size brass butt hinge to PVC doors, complete all as specified and as directed

S&F 125mm size extruded brass handles, fabricated type complete all as specified and as directed.

S&F 250mm Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled of drawn brass bolts and fixed complete all as specified and directed.

S&F 150mm size brass barrel tower bolt, of extruded section complete all as specified and as directed.

M&L in repair mild steel pipe 25 mm dia curtain road with PVC coating fixed in the MS hooks, and finials/side brackets (both side), shade as approved by GE all as specified

S&F 20mm dia curtain rails, mild steel, chromium plated fixing in cup board with brackets, stops, rollers etc, all as specified

Dismantling of brick work or stone/boulders masonary, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc. and rubbish materials remove from site all as specified and directed

M&L for Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick cement plaster in cement mortar 1:6 on internal surface of brick or concrete surface finished even and smooth without using extra cement all as specified.

M&L for 15mm thick cement plaster in cement mortar 1:4 on external surface brick or concrete surface finished even and smooth without using extra cement, complete all as specified as directed.

Supply only integral water proofing compound (ISI marked) all as specified

M&L for 5 mm thick cement plaster in cement mortar 1:3 on ceiling surfaces finished even and smooth without using extra cement all as specified

M&L for preparing new surfaces plastered or unplastered surfaces of walls by applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

M&L for preparing new plastered surfaces of walls and applying two coat of acrylic exterior emulsion paint over a coat of wall primer complete all as specified and directed.

M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of ceiling surfaces complete all as specified and directed by Engr-in-Charge

M&L for complete removal of existing treatment of old decorated wall surface and applying two coats of acrylic exterior emulsion paint over a coat of wall primer complete all as specified and directed.

M&L for preparation of old decorated/treated surface of walls including removing existing treatment by rubbing, scrapping, washing and applying one coats of oil bound distemper including a coat of putty complete all as specified

M&L for preparation of old decorated surface of walls and applying one coats of white (Lime) wash complete all as specified.

M&L for preparation of old surface of ceiling and applying one coats of white (Lime) wash complete all as specified.

M&L for preparation of new wood or wood based surfaces of any description, not otherwise described over 10cm width or girth and applied two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engr -in-charge.

M&L for preparation of steel surfaces exceeding 10 cm with or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Excavating in trenches, n.exc 1.50 m wide & n exc. 1.5m depth & getting out in soft/loose soil complete all as specified

M&L for PCC 1:4:8 type C2 (40mm graded aggregate) as in foundation, filling & mass concrete complete all as specified

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified

M&L for 75mm thick Cement concrete type PCC-B2 1:2:4 (40 mm graded crushed stone aggregate) in surface channels and drains complete all as specified

M&L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in coping in CM 1:6 complete all as specified

Returning, filling in soft/ loose soil, including spreading, levelling, watering & well ramming in layers n.exc 25 cm complete all as specified

M&L for removing excavated material n.exc 50m & depositing where directed at a level n.exc 1.5m above the starting point in soft/ loose soil complete all as specified

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete , using exrta cement, including forms, moulds, mitred /stopped ends etc. complete all as specified

Taking down carefully existing point wiring of any type/ any size (i.e. on wooden/ batten, surface conduit, casing capping or concealed conduit) complete for light, fan, socket or power point etc including removing switches, sockets, holders, ceiling rose, pendants, regulators, light fittings, switch board outlets with sheets and other materials from site for refixing of serviceable light and for taking credit of unserviceable light as per Sch of credit and making good disturbed surface of walls, roof, floors etc. with any type of civil work involved complete all as specified and directed

M&L for point wiring with modular accessories for one light point/fan point/bell point controlled by one switch with 1.5 Sqmm (nominal area) FRLS PVC insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm cable drawn in and including concealed rigid PVC conduit medium grade not less than 20mm dia with accessories including cutting chases for laying of conduit /fixing of boxes in walls/floor etc including making good to disturbed surfaces as per adjoining specification and terminated in and incl sunken pressed steel modular boxes (1.6 mm thick sheet and min 50 mm deep) with suitable modules white cover plate fixed with nickel polished screws etc including FRLS PVC insulated unsheathed multi stranded copper conductor 1.5 Sqmm single core as earth continuity conductor (green colour) connected with earth dolly with thimble complete all as specified and directed by Engineer-in-Charge

Ditto all as per Srl item No. 99 above, but for one socket outlet 6 Amps on independent board complete all as specified.

Ditto all as per Srl item No. 99 above, but for one socket outlet 6 Amps on the same board controlled by one switch complete all as specified.

Ditto all as per Srl item No. 99 above, but for one light point controlled by 2 Nos, two way switch complete all as specified.

Ditto all as per Srl item No. 99 above, but with 2.5 Sqmm (nominal area) FRLS PVC insulated unsheathed multi stranded copper conductor cable for one 3 Pin 16 Amp socket on independent board incl Modular cover plate and suitable metal sunken box of suitable modules including one 2.5 Sqmm FRLS PVC insulated unsheathed multi-stranded copper conductor cable green colour 1100 volts grade as earth wire connected to earth dolly with all accessories complete all as specified and directed by Engineer-in-Charge. (switch ,socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same deemed to be included in the unit rate)

S&F Modular switch piano flush type, 6 Amps, 240 Volt AC single pole, one way complete all as specified.

S&F Modular switch piano flush type, 16 Amps, 240 Volt AC single pole, one way complete all as specified.

S&F modular switch 6 Amp, single pole, two way (1 module) complete all as specified and as directed by Engr-in-Charge

S&F Modular socket out let 6 Amp, 5 pin, 2-in-1 flush type complete all as specified.

S&F Modular socket outlet multi purpose 2 in 1, 5/6 pin, 6 & 16 Amps, flush type complete all as specified.

S&F ceiling rose surface type PVC/ polycarbonate 65mm x 50mm three terminal complete all as specified.

S&F Modular Bell push switch, 6 Amp, single pole, one way (1 module) complete all as specified

S&F electric calling bell Ding Dong type, AC 230 volts single pole including making electric connection complete all as specified and directed

Taking down and refixing (with 0.75 sqmm 3 core flexible wire) carefully ceiling fan of any sweep, any size/make painting of fans complete (as per previous colour), with synthetic enamel paint by spraying including filling cavaties with filler one coat after cleaning all dust etc. including replacement of flexible wire, rubber reel, nut, bolts, split pin all as specified and directed

M&L for Hanging only/ fixing only ceiling fan 1200mm/1400mm sweep after repair & maintenance upto any height upto 5 Mtr complete incl making electric connections, testing complete all as specified and directed

S&F 2 Module five step fan regulator, electronic type, single phase, including connection complete all as specified

S&F (concealed flush to wall) factory made DB (made out of CRCA sheet not less than 1.2mm thick, fitted with DIN channel neutral link and 200 Amp rated bus bar) SPN, 8 Way 240V, suitable for mounting MCB/Isolator etc, conforming to IS-13032, DB shall be semi glossy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-43 protection class, and including making good disturbed surfaces of walls as necessity complete all as specified and directed by Engineer-in-Charge. Note :- MCB/Isolator etc shall be measured and paid separately under appropriate item of BOQ

S&F (concealed flush to wall) factory made DB (made out of CRCA sheet not less than 1.2mm thick, fitted with DIN channel neutral link and 200 Amp rated bus bar) SPN, 4 Way 240V, suitable for mounting MCB/Isolator etc, conforming to IS-13032, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-43 protection class, and including making good disturbed surfaces of walls as necessity complete all as specified and directed by Engineer-in-Charge. Note :- MCB/Isolator etc shall be measured and paid separately under appropriate item of BOQ

S&F energy efficient LED security light fitting of 25W pressure die cast aluminium housing/body, heat resistant clear toughened glass, better optics for uniform distribution street luminaire, with driver, including electric connection with using 3 core flexible copper conductor cable 1.5Sqmm from ceiling rose to light fitting, fixing the light fitting with new bracket made out of GI tubing light grade 25mm dia, 1.2 metre long bent to shape at 120 degree angle at half metre from bottom, including two Nos clamps made out of MS Flat iron size 25x3 mm with suitable nuts and bolts for fixing of bracket including painting to MS clamp and nut bolts with two coats of aluminium paint over a coat of red oxide primer, complete fitting with all accessories and following specifications, complete all as specified and directed by Engineer-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 120 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95 (e) THD : Max10%. (f) IP rating : IP66. (g) IK rating : Minimum IK07

(h) Built in potted LED Driver of the make as of the luminaire. (j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (k) Surge protection 10 kV (inbuilt + extended) (l) CCT : 5700 K. (m) CRI : Minimum 70 (n) Lens - High Efficiency wide angle lens. (o) BIS Approved fixtures and driver (p) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily) (q) LED source : Hi power LED 3 to 5W High power type

S&F in repair for batten holder polycarbonate cased body (B22 base) top line series, with back plate complete all as specified

S&F LED lamp minimum 3 star rated 12W LED B-22 base complete all as specified and directed by Engr-in-Charge

S&F MCB SPN 40 Amps 240 V, 10 KA, C curve as per complete all as specified and directed by Engr-in-Charge

S&F MCB SPN 16 Amps 240 V, 10 KA, B curve as per complete all as specified and directed by Engr-in-Charge

S&F MCB SP 6 to 32 Amps 240 V, 10 KA, B curve as per complete all as specified and directed by Engr-in-Charge

S&F LED lights fitting 1x 20 Watt, 220V,AC smart extruded aluminium batten (4 ft) with higher efficacy with Microwave sensor to save more energy reduce the light intensity by 70 percent during non occupancy of person with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to tube fitting, complete fitting with all accessories and following specifications, complete all as specified and directed by Engineer-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 110 Lumen per watt. (b) Input Voltage range : 140 to 270 volts. (c) Temp operating range : Minus 5°C to Plus 45°C (d) Power factor : Minimum 0.95 (e) THD : Current THD Max10% and voltage THD max 5% (f) IP rating : IP-20. (g) LED Driver of the same make as of the luminaire. (h) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (j) Surge protection minimum 2.5 kV. (k) CCT : Minimum 6000K (l) CRI :Greater than 90 (m) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily)

S&F LED lights fitting 1x 10 Watt, 220V,AC smart extruded aluminium batten (2 ft) with higher efficacy with Microwave sensor to save more energy reduce the light intensity by 70 percent during non occupancy of person with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to tube fitting, complete fitting with all accessories and following specifications, complete all as specified and directed by Engineer-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 110 Lumen per watt. (b) Input Voltage range : 140 to 270 volts. (c) Temp operating range : Minus 5°C to Plus 45°C (d) Power factor : Minimum 0.95 (e) THD : Current THD Max10% and voltage THD max 5% (f) IP rating : IP-20. (g) LED Driver of the same make as of the luminaire. (h) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (j) Surge protection minimum 2.5 kV. (k) CCT : Minimum 6000K (l) CRI :Greater than 90 (m) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily)

M&L for Earthing complete in replacement with galvanised steel earth plate electrode 60cmx60cmx6.0mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level with the top edge of electrode not less than 1.5 metres below normal ground level connected to galvanised earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron and incl GI lead protection pipe of GI light grade 15mm dia upto 7.5 mtrs and watering pipe 20mm bore of GI medium grade with funnel and wiremesh, earth plate covered on all sides with min 150mm thick alternate layers of charcoal, salt all as shown in electrical plate No 3 of SSR Part-I 2020 connected to earthing point with PCC chamber and RCC cover in 1:2:4 complete with any type of earth work involved all as specified and directed and testing on completion. Note:- PCC Chamber shall be constructed at least 0.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner

M&L for concealed sub main wiring (using colour coding such as red, black, yellow colour or as directed) with 6 Sqmm single core (03 run i.e 2 runs for main phase and neutral, 01 run for continuity earth wire) FRLS PVC insulated unsheathed multi-stranded copper conductor cable drawn through and including PVC conduit 25 mm dia (medium quality ISI marked) for independent circuit including all fitting arrangement i.e PVC clamp, rawl plug, screw, PVC junction box, tee, bend etc. complete with any type of civil work involved to make good disturbed surfaces of wall as per original complete all as specified. Note : Two run of 6 sqmm wire and one run of 6 sqmm wire as earth wire including PVC concealed conduit shall be measured as one unit

S&F in repair TPN DB 4 way double door, including 63 Amp MCB TPN, having copper bus bar for neutral and earth, blanking strips complete all as specified and directed

S&F in repair MCCBs 63 Amp 4 pole 415 V,16 KA, adjustable thermal and fixed magnetic settings (0.8 to 1.0) to Ics=100% Icu short circuit setting fixed breaking capacity 25 KA with phase barriers/ separator/ spacer/ copper spreader link and required nut bolts complete all as specified and directed

M&L for concealed in wall rigid non metallic PVC conduit 25 mm dia (medium duty, ISI marked) for telephone wiring, cable TV etc inclusive of all fitting & accessories such as tees, bends, elbows, reducer, junction box, pipe hooks etc, bell mouth tube ends including cutting chases in wall and making good disturbed surfaces of wall/ ceiling/ floors etc. complete all as specified and directed

BHARAT ENTERPRISES (BID ID -3509622)

SANMATI UDYOG (BID ID -3514642)

G S TRADERS (BID ID -3515107)