Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹22.3 LAccepted-AOC NO 3 JAMI JAM KHAN ROAD 1ST LANE ROYAPETTAH CHENNAI 600 014 | CHENNAI | CHENNAI | TAMIL NADU | 600014 | 1 | Accepted-AOC Being the lowest and fulfilling all the criteria | |
| 2 | 2₹25.3 L+₹2.9 L (13.1%)Rejected-Finance NO 5 3 JJ KHAN ROAD 1ST LANE ROYAPETTAH CHENNAI 600 014 | CHENNAI | TAMIL NADU | 600014 | 2 | Rejected-Finance Not being the lowest tenderer |
Tender Value
₹21.2 L
EMD Value
₹42,400
Closing Date
25 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE CHENNAI
FORT SAINT GEORGE CHENNAI
SPL REPAIR TO PORTION OF BLDG NO IV INSIDE FORT OTM ACCN AT 4 PARS AND CONSTRUCTION OF STORAGE ACCN AT OFFICE COMPLEX UNDER GE CHENNAI
2022_MES_531605_2
8594/E8
Open Tender
Civil Works
Item Rate
183 days
FORT SAINT GEORGE CHENNAI
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE CHENNAI
₹42,400
Yes
29 Sept 2022
4 Aug 2022
1 Sept 2022
4 Aug 2022
25 Aug 2022
11 Aug 2022
Amount
BOQ UPLOADED ON 04 AUG 2022
Surface dressing n exc 15 cm deep in soft/ loose soil all as specified and directed.
Excavation in trenches in soft/ loose soil not exceeding 1.5m in wide and not exceeding 1.5m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc n exc 10 sqm on plan all as specified and directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed.
Removing excavated material/ soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
M & L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
M&L for broken stone or boulders hard core of gauge n. exc. 63mm, deposited, spread and levelled in layers n. exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.
Supply only liquid water proofing compound all as specified and directed.
M&L Cement concrete in foundations, fillings, and mass concrete type D2 (1:4:8) using 40mm graded stone aggregate complete all as specified and directed.
M&L for 100mm thick cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sub floors, sub bases etc complete all as specified and directed.
M&L for 40mm thick cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in sub floors, sub bases etc finishing even and smooth with using extra cement complete all as specified and directed.
M&L for 75mm thick cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate complete all as specified and directed.
M&L for reinforced cement concrete, M-30 (Design mix), using 20mm and below graded stone aggregate as in Column complete all as specified and directed.
M&L for reinforced cement concrete, M-30 (Design mix), using 20mm and below graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, deck slabs and the like all as specified and directed.
M&L for reinforced cement concrete, M-30 (Design mix), using 20mm and below graded stone aggregate as in foundations, basement slabs and the like complete all as specified and directed.
M&L for reinforced cement concrete, M-30 (Design mix), using 20mm and below graded stone aggregate as in Roof beams complete all as specified and directed.
M&L for brick work with fly ash bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed.
M&L for brickwork with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed.
M&L well burnt bricks sub class 'B' in trenches for cable protection of U/G cable complete all as specified and directed.
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick of for rough finished surfaces of concrete all as specified and directed.
Use and waste of formwork to sides of foundations, footings, bases of coumns, raft & raft beams, sides & soffits of foundation & plinth beams; and similar works for rough finished surfaces of concrete all as specified and directed.
Use and waste of formwork to sides of columns, rough finished surfaces of concrete square, retangular and similar work vertical or to rough finished surfaces of concrete all as specified and directed.
Use and waste of formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc alos splayls between floors & beams etc and similar works with fair finished surfaces of concrete all as specified and directed.
Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exc. 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc. 10cm but not exc. 20cm wide flat rough finished surfaces of concrete all as specified and directed.
M&L for 10mm dia and over mild steel TMT bars as in reinforcement cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-500D complete all as specified and directed.
M&L for 8mm dia mild steel TMT bars as in reinforcement cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-500D complete all as specified and directed.
M&L for rendering 15mm thick in two coats i.e. 1st coat 10mm thick in cement mortar (1:6) and 5mm thick finishing coat in cement mortar (1:4) mixed with liquid water proofing compound 200ml per bag of cement and finishing the surface even and smooth without using extra cement complete all as specified and directed. Note: Supply only of liquid water proofing compound shall be measured and paid for separately under appropriate item of this BOQ.
Taking down cement plaster on brick work or stone walls etc. including racking out of joint, hacking for key, scrubbing down with water etc. and removing the debris outside MD land complete all as specified and as directed.
M&L rendering 10mm thick in cement mortar (1:6) on fair faces of brick/ concrete surface finished even and smooth without using extra cement complete all as specified and directed.
M&L for 20mm thick plaster in CM(1:4) with WPC over roof slab complete all as specified and directed.
M&L for 5mm thick rendering in cement mortar (1:3) as on ceiling finished even and smooth without using extra cement complete all as specified and directed.
M&L for vitrified light shade coloured ceramic tiles 8 to 10mm thick (Square/ Rectangle) area of each tiles n exc. 0.36 sqm or coloured cement to match laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and directed.
All as per item No. 31.00 above but on vertical surfaces such as skirting, dados and risers as in steps etc. laid over and including 10mm thick rendering in cement mortar (1:3) complete.
M&L for non skid coloured ceramic tiles 7mm to 8mm thick (Square/ rectangular) area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed in cement mortar (1:4) complete all as specified and directed.
M&L glazed coloured ceramic tiles of size 350mm x 250mm x 7mm/ 450mm x 300mm x 7mm thick laid on vertical surfaces set and jointed in neat cement slurry and pointed in coloured cement to match the tile laid over and including 10mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.
Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc. 1.5 sqm but not exc. 4sqm each including separating guard bars/ grills/ wire mesh etc. complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets; any thickness, including cover fillets/ snap grid etc. complete all as specified and directed.
M&L for galvanised powder coated snap grid framework for false ceiling all as specified including Vinyl laminated MPL gypsum panels (GYPTECH) 9mm thick of size of 60cm x 60cm fixing with staples on snap grid on RCC slabs by means of GI wire not less than 4mm dia, hooks and rawl plugs etc. at 1200mm c/c of make GYPTECH/ ARMSTRONG OR equivalent as approved complete all as specified and directed.
S&F anodized aluminium (minimum thickness of powder coating 50 micron) frames for doors, windows and ventilator with one or more rebates including joining cleats for fixing with powder coating complete all as specified and directed.
M&L in repair for 12mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination fixed with screws to aluminium frame work complete all as specified and directed.
S&F aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed to wood/ steel frames with aluminium wire staples complete all as specified and directed.
S&F in repairs aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed to wood/ steel frames with aluminium wire staples including taking out old damaged wire mesh with beading etc. complete all as specified and directed.
S&F in repair aluminium (Die cast) body door closer hydraulically regulated, designate No. 1, universal type, suitable for door shutters of 700mm in width and weight Not more than 35 kg all as specified and directed.
S&F brass mortice lock vertical type 4 levers of size 100mm complete all as specified and as directed.
M&L for mild steel work in bands, straps, supports of stays, sunshade brackets, hook and spintle hinges, clamps, hold fasts, guard bars, grills bolts etc and similar conforming to FE-290, Gde E 165 complete all as specified and directed.
S&F powder coated panelled door shutters using aluminium section weighing not less than 0.55 Kg/RM including necessary joining cleats, glazing clips, rubber neoprene packing, 2 nos 150mm handles, 02 nos 200mm long tower bolts, 03 nos hinges etc in each door, fully glazed with 4mm thick glass, 12mm prelaminated particle boards etc incl anodized aluminium snap beading, screws, anodized aluminium fittings complete all as specified and directed. Note: 4mm thick glass panes & 12mm prelaminated particle boards be measured and paid separately.
S&F sheet glass 4mm thick plain ordinary quality and glazing with oil putty/ wooden beads as directed in squares n. exc. 0.50 Sqm in each pane complete all as specified and directed.
S&F in repairs sheet glass 4mm thick plain ordinary quality and glazing with oil putty/ wooden beads as directed in squares n. exc. 0.50 Sqm in each pane including hacking out old broken glass complete all as specified and directed.
M&L for applying three coats of white wash on walls including preparation of newly plastered surfaces complete all as specified and directed.
M&L for applying three coats of white wash on ceilings including preparation of newly plastered surfaces complete all as specified and directed.
M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper over and including a coat of alkali resistant primer including 2 to 3mm thick wall care putty complete all as specified and directed.
M&L for preparation of old wooden or wood based surface of any description exceeding 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.
M&L applying two coats of weather proof paint (APEX of approved shade) over a coat of alkali resistant primer including preparation of newly plastered surfacescomplete all as specified and as directed.
Demolition of reinforced cement concrete as in roofs, floors, (other than ground floors) beams,staircases, landings, chajjas mand other similar suspended works complete all as specified and as directed.
Demolition of brick masonry built in cement mortar including all quoins, arches, pillars, ashlars facings, dressed stone work and pre cast concrete articles etc., complete all as specified and as directed.
Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) and removing the debris outside MD land and rubbish of the premises complete all as specified and directed.
Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, all as specified and as directed.
M&L for point wiring complete with 1.5sqmm (nominal area) PVC insulated unsheathed multi-stranded, (two run for Phase and Neutral) copper conductor FR & LS grade cable of 1100V grade conforming to IS -694 drawn through and including new non-metallic rigid PVC conduit medium grade, ISI marked, 20mm bore with conduit accessories concealed In wall/ floor and fixed on ceiling/roof etc. including new pressed steel terminal boxes 1.6mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing the switch sockets, outlets, fan regulator etc. including provn of 1.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly etc., complete all as specified and directed for:- (fittings such as switches, ceiling rose, pendant, regulator sockets etc., to be measured separately)
One light point controlled by one switch.
One ceiling Fan/ Exhaust fan point controlled by one switch.
One 3 pin 5 amps socket outlet on the same board with other switches controlled by one switch.
One 3 pin switch socket outlet, 5 Amps on independent board controlled by one switch.
One socket outlet 3 pin 15 Amps controlled by one switch independent board with cable 2.5 Sqmm size. (Two run ) and 2.5 Sqmm (one run) all as specified and as directed.
S&F switch piano, flush type, single pole, one way, 5 Amps, 230 volts all as specified and directed including taking down old u/s.
S&F socket outlet 2 in 1, 3 pin 5 Amps, 230 volts all as specified and directed including taking down old u/s.
S&F switch piano, flush type, single pole, one way, 15 Amps, 230 volts complete all as specified and directed including taking down old u/s.
S&F socket outlet 3 pin, 15 Amp, flush type, 230 volts all as specified and directed including taking down old u/s.
S&F ceiling rose PVC/ polycarbonate body 65 x 50mm 2 to 3 terminals 230 Volts, AC Single phase all as specified and directed including taking down old u/s..
S&F electronic ceiling fan regulator, flush type, 300 watts all as specified and directed including taking down old u/s.
S&F Lamp holder insulated body with back plate for batten fittings/angle holder as required and including taking down old damaged holder all as specified and directed.
S&F LED light fitting 9 watts suitable for lamp holder complete all as specified and as directed including taking down old u/s. Make: Havells/ Philips/ Wipro / CG.
S&F LED light fitting 20 watts basic all-purpose surface and wall mounted LED batten 20 Watts with aluminium housing and integrated electronic driver including 20W LED tube- 1 No on surface of wall or ceiling including taking down old fittings complete all as specified and as directed including taking down old u/s. Make: Crompton cat No. CCS-103-20-65-SL-DP-NWH or equivalent from Havells/ Philips/ Wipro.
S&F LED light fitting 10 watts basic all-purpose surface and wall mounted LED batten 10 Watts with aluminium housing and integrated electronic driver including 20W LED tube- 1 No on surface of wall or ceiling including taking down old fittings complete all as specified and as directed including taking down old u/s. Make: Crompton cat No. CCS-103-10-65-SL-DP-NWH or equivalent from Havells/ Philips/ Wipro.
S&F LED light fitting 36 watts 2X2 Ceiling light environment friendly, new generations, aesthetically, ultra modren deeigned Recess munting luminaire with high brightness SMD LEDs as light source suitable for Armstron/Grid Ceiling including taking down old fittings complete all as specified and as directed including taking down old u/s. Make: Crompton cat No. CCS-103-20-65-SL-DP-NWH or equivalent from Havells/ Philips/ Wipro.
M&L for submain wiring complete with two runs of 4.0 Sqmm single core, multistranded, FR PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including rigid non metallic PVC conduit Concealed in wall medium grade fixed on wall/ floor/ ceiling along with conduit fittings and accessories, with one run of 4.0 Sqmm PVC insulated unsheathed copper conductor cable of Green color as earth continuity conductor including Taking down old unservicable sub main complete all as specified and as directed by the Engineer-in-Charge. Note: 2 runs of 4.0 sq. mm cable & 1 run of 4.0 sq.mm earth wire shall be measured as one length
M&L for submain wiring complete with two runs of 6.0 Sqmm single core, multistranded, FR PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including rigid non metallic PVC conduit Concealed in wall medium grade fixed on wall/ floor/ ceiling along with conduit fittings and accessories, with one run of 6.0 Sqmm PVC insulated unsheathed copper conductor cable of Green color as earth continuity conductor including Taking down old unservicable sub main complete all as specified and as directed by the Engineer-in-Charge. Note: 2 runs of 6.0 sq. mm cable & 1 run of 6.0 sq.mm earth wire shall be measured as one length
S&F MCB distribution board made of 1.2mm thick special CRCA sheet, powder coated with high quality weather proofing paint conforming to IS 13032, double door fixed in switch boards/wall at various places of capacity 240 Volts, 12 way MCB DB, SPN with 200 Amps rated bus bar conforming to IP 38 protection complete including taking down the old unserviceable all as specified and as directed.
S&F MCB distribution board made of 1.2mm thick special CRCA sheet, powder coated with high quality weather proofing paint conforming to IS 13032, double door fixed in switch boards/wall at various places of capacity 415 Volts, 6 way TPN MCCB DB, Shall confirm to IP 38 protection complete including taking down the old unserviceable all as specified and as directed.
S&F MCCB of rating 415 Volts, 16 KA, 4 pole 125 Amps complete including taking down the old unserviceable all as specified and as directed.
S&F MCB SP of rating 10 KA, 40 Amps complete including taking down the old unserviceable all as specified and as directed.
S&F MCB of SPN of rating 32 Amps complete including taking down the old unserviceable all as specified and as directed.
Supply, fix, MCB single pole, 6 to 32 Amps, including taking down the existing one complete all as specified and directed.
Supply and fix single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amps complete all as specified and directed.
Taking down and supply and ceiling fan with blades, down rods, electronic regulator and accessories, 230V, 1200 sweep. Five star rated with brushless direct current motor complete and old fan deposite to E/M store complete all as specified and directed by Engr-in-charge.
Taking down and supply and fix exhaust fan, steel body AC single phase, 230V of size 300m sweep with, blades and frame and louvers complete and old fan deposite to E/M store complete all as specified and directed by Engr-in-charge.
Supply, laying and testing cable XLPE insulated, screened PVC bedded, galvanized steel strip or wire armoured, electric power cables(heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sqmm 3.5 core
Earthing complete with galvanized steel earth plate electrode of size 600mm x 600mm x 6.0mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of plate not less than 1.5m below normal ground level, earth plate connected to galvanized iron earth strip of size 25mm x 4mm as earthing conductor by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR part I (2009) connected to earth test point/ main switch/ DB/ Panel board all as specified or indicated including testing on completion with and including 15mm bore light grade GI protection pipe for earth strip including PCC (1:3:6) type C1 pit with 40mm thick precast RCC (1:2:4) type B-1 cover reinforced with 8mm dia MS bars @ 100mm c/c both ways with lifting hooks made out of 12mm dia MS bars, wire mesh funnel with watering pipe 20mm dia light grade, common salt, charcoal filling in layers as specified, necessary excavation and earth work in any type of soil etc., testing on completion including dismantling existing earthing complete all as specified and as directed.
G.JANAKIRAMAN CO
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .