RMO of Electrical and Mechanical installations at Maharaja Agrasen College at Vasundhara Enclave, Delhi. Replacement of old defective fl. fittings into LED Fittings at different locations

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: Executive Engineer(E) PWD M-253

Name of Work:- RMO of Electrical and Mechanical installations at Maharaja Agrasen College at Vasundhara Enclave, Delhi. (Sub Head:- Replacement of old defective fl. fittings into LED Fittings at different locations).

NIT No.:117/EE(E)/PWD M-253/2025-26 Estimated Cost:-19,14,524./-

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Sub Head Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. Group C Point 1064 374800 Excess(+) Full Conversion INR

2 Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 x 1.5 sq. mm Mtrs 104 374800 Excess(+) Full Conversion INR

3 LED Batten light (System lumen efficacy ≥105 <120 lm/Watt). Supplying, Installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range -5 °C to 40 °C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P.F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 36 watt Each 678 374800 Excess(+) Full Conversion INR

4 LED Panel light 2x2 ft. (System lumen efficacy ≥105 <120 lm/Watt) Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 36 watt Each 2508 374800 Excess(+) Full Conversion INR

5 Supplying, installation, testing & commissioning of 34 to 36 Watt surface mounted LED luminaire of size 1200mm X 300mm (N.S) with white powder coated CRCA housing with PC Diffuser & integrated electronic driver having following specifications i/c suitable mounting arrangement, making connection with 1.5 sq mm FRLS PVC insulated copper conductor cable and earthing complete as required. Lumen output: ≥3800 lumens System efficacy: ≥105 <120 lm/Watt CRI: ≥80 CCT: 5500-6500k Life: 50000hours @L70 THD: ≤10% Surge protection: ≥2.5KV Driver efficiency: ≥85% Power factor: ≥0.95 Voltage range: 160-270V Each 374800 Excess(+) Full Conversion INR

6 Credit for following material under buy back including dismantling from site and good the same: Copper conductor cable (Assorted) kg 150 374800 Excess(+) Full Conversion INR

7 LED Batten fitting (Assorted) Each 10 374800 Excess(+) Full Conversion INR

8 2'x2' LED / 1'x4' T-5 Fl. fitting (Assorted) Each 50 374800 Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information