Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.8 LAccepted-AOC VILL BARANGABARI PO KACHUBARI PS TAMULPUR DIST TAMULPUR PIN 781354 | KAMRUP | ASSAM | 781354 | L1 | Accepted-AOC Finance Accepted | |
| 2 | L2₹47.1 L+₹1.3 L (2.94%)Rejected-Finance | L2 | Rejected-Finance Financially Rejected | |
| 3 | Rejected-Technical | - | Rejected-Technical Technically Dis-Qualified as the bidder not deposited the requisite EMD. |
Tender Value
₹45.8 L
EMD Value
₹91,520
Closing Date
6 Mar 2023, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
BLOCK DEVELOPMENT OFFICER, GORESWAR
Block Development Officer, Goreswar Development Block, Dist - Baksa, BTC, Assam
Construction of Tamulpur Primary Bodo Sahitya Sabha Office (RCC Gr. Floor only) at Barengaon Tamulpur Development Block, Goreswar, Tamulpur.
2023_BoTC_29481_1
GDB/SOPD/WPT and BC/51/2019-20/2127
Open Tender
Civil Works
Works
180 days
Barengaon Tamulpur Development Block, Goreswar
Please refer Tender documents.
5 documents required · 5 mandatory
₹915
₹91,520
Yes
5 Mar 2024
22 Feb 2023
6 Mar 2023
22 Feb 2023
6 Mar 2023
22 Feb 2023
22 Feb 2023 - 28 Feb 2023
CONSTRUCTION OF TAMULPUR PRIMARY BODO SAHITYA SABHA OFFICE(RCC Gr FLOOR ONLY)
Earth work in excavation by mechanical means(Hydraulic excavator)/ manual means in foundation trenches or drain (not exceding 1.50m in width or 10.00sqm on plain) incl1:Jding dressing of sides and ramming of bottoms, lift upto 1.50m including getting out the excavated soil and disposal of surplus excavated soil as directed withi a lead of 50m including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 all kinds of work.
Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12mm mud morter including fiiiling joints with jamuna sand with common burnt clay non modular bricks.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level .4.1.5,1:3:6(1 Cement 3 coarse sand(zone-III): 6 Graded stone aggregate 20mm nominal size)
Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete upto plinth level 5.22.6 Thermo-Mechanically Treated(TMT) bars of grade Fe-500 or more.
Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete upto plinth level 5.22A.6Thermo-Mechanically Treated(TMT) bars of grade Fe-500 or more.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. 5.22A.1 Mild steel and Medium Tensile steel bars.
Centering and shuttering including strutting, propping etc. and removal of form for: 5.9.l Foundations, footings, bases of columns, etc. for mass concrete
Columns, Pillars, Piers, Abutments, Posts and Struts, Column
Lintels, beams, plinth beams, girders, bressumers and cantilevers
Suspended Floors, roofs, landings, balconies and access platform Slab.
Stairs, (excluding landings) except spiral staircases.
Providing and laying in position specified grade of reincorced cement concrete; excluding the cost of cetering, shuttering, finishing and reinforcement- (All works up to plinth level). 1:1.5:3(1 cement : 1.5 coarsesand (zone-Ill) 3 graded stone aggregate 20mm nominal size.)
Reiforcement cement concrete work in wall (any thickness), including attached plester, buttresses, plinth and string courses, fillets, columns,pillers,piers,abutments,post and struts etc. above plinth level up to floor levle, excluding cost of cetering,shuttering, finidhed and reinforcement.1:1:5:3 (1 cement: 1.5 coarse sand (zone-III) : 3graded stone aggregate 20mm nominal size)
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1cement :1.5 coarse sand(zone-III): 3 graded stone aggregate 20 mm nominal size).
Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in foundation and plinth in.Cement morter 1:4 (1 cement,4 Coarse sand).
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :6.12.2 cement mortar 1:4 (1 cement : 4 coarse sand)
Providing and fixing presscd steel door conforming IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thicknes including hinges,jamb,lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm or base of 1.60mm, pressed butt hinges 2.5mm thick with mortar guards, lock strike plate and shock absorbers as specified and applying a cost of approved steel primer after treatment of the surface as directed by Engineer in charge. 10.14.2 Profile C 10.14.2.1 Fixing wiLb .1djuscahlc lugs withplit end tail meach jamb
Providing and fixing ISI maked flush door shutters conforming to IS: 2202(part I) decorative type, core of block board construcation with frame of class hard wood and well matched teak 3 ply veneering with vertical grains or cress bands and face veneers on both faces of shutters. 9.20.135 mm thick including ISI maked Stainless steet butt hinges with necessary screws.
Providing and fixing M.S. Tubular frames for door , windows ventilation and cupboard with rectangular/L-type section made of 1.60mm tahick M.S. sheet joints mitred welded and grinded finish with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming cost of approved steel primer. 10.15.1 fixing with 15x3mm lugs 10cm long embedded in cement concret block 15x10x10cm of C.C. 1.3.6 (1 Cement :3 graded stone aggregate 20mm nominal size)
Providing and fixing glass panes with putty and glazing clips in steel door windows clerstory windows,all complete with 10.30.14.0mm thick glass panes.
Providing and fixing factory made uPVC door frame made of uPVC extruded sectiots having an overall dimension as below (tolerance ± lmm), with wall thickness 2.0 mm ± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded.The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as p r manufacturer's specification and direction of Engineerin-charge. 9.117.1 Extruded section profile size 48x40 mm
Providing and fixing to existing door frames. 9.118.124 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuift edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (t 0.1 mm) wall thickness. The lock rail made up of H section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the hutter styles by means of plastic/galvanised M.S. 'U' cleats. The shuttr frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness.The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter).
12 mm cement plaster of mix : 13.4.21:6 (1 cement: 6 coarse sand)
15 mm cement plaster on rough side of single or half brick wall of mix: 13.5.21:6 (1 cement: 6 coarse sand)
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square of round bars etc. including priming coat with approved steel primer all comple etc. 9.48.1 Fixed steel windows by welding.
Excavating, supplying and filling of local earth (including royalty) by mechanioal transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foupdation etc. complete.
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion): 2.35.3 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart inciuding drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 Coarse sand) to match the existing floor: 2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
Providing and laying vitrified floor tiles in different sizes (thickne s to be specified the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (l cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm includirg grouting the joints with white cement and matching pigments etc., complete. 11.41.2 Size of Tile 600x600 mm.
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cemeqt : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointihg in white cement mixed with pigment of matching shade complete.
Structural steel work rivetcd, bolted or welded in built up sections, trusses and framed work, including cutting, fixing, in position and applying a priming coat of approved steel primer all completc.
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of 12.50 corrugation as approved by Engineer-in-charge) 0.50 mm ( 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Providing and fixing MS fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with 10.17 hooked ends in RCC slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete.
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 13.9.1 12 mm cement plaster
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement 3 coarse sand (zone-III): 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade 13.41.1 New work (two or more coats) over and including water thinnable priming coat with cement primer
13:44 Finishing walls with water proofing cement paint of required shade 13.44.1 New work (Two or more coats applied @3.84 kg/10 sqm)
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc complete 13.52.1 On steel work
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 9.96.2 250x16 mm
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessJry screws etc. complete : 9.97.2 250x10 mm
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 9.100.1125 mm
Sanitary and Water supply Work.
Construction of septic tanks (Detailed Estimate enclosed) 100 Users
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid,10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 17.2.1 W.C. pan with ISi marked white solid plastic seat and lid
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P.brass pillar lapseach 3087.70
Providing and fixing mirror of superior glass (of approved quality) and ofrequired shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 17.32.2Rectangular shape 453x357 mm.
Providing and fixing PTMT oap Dish Holder having length of 138mm, breadth 102mm,height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP bn;1S61'crews with concealed fittings arrangement of approved qualJtyand colour. 17.73.1 450 mm long towel rail with total length of495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms.
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. 19.32.1With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Water Supply Works.
Boring with 100 mm diameter casin pipe for hand pump / tubewell, in all soils except ordinary hard rocks requiring blasting, including removing the casing pipe after the hand Rm pump / tube well is lowered and tested : 18.42.3Beyond 12 m and up to 18 m depih.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply iluding all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 18.9.7 62.50 mm nominal inner dia Pipes.
Providing and placing in position filters of 40 mm diameter G.I. pipe with brass strainer of approved quality. metre 768.55
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and tuitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cementand testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 18.7.5 40mm nominal outer dia pipes.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 18.8.3 35mm nimina outer dia pipes.
18.8.3 35mm nimina outer dia pipes.
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS 8931. 18.52.115 mm nominal bore.
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 18.49.115 mm nominal bore
LAND DEVELOPMENT (EARTH FILLING)
Excavating , supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth of foundation etc. complete. Other then Guwahati city.
INTERNAL ELECTRIFICATION WORK
Internal Electrification Work.
CONTINGENCY
Add 5% Contingency.
MISS MAYABATI BRAHMA
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .