ADDN ALTN TO ATC BUILDING AND ASSOCIATED ATC FACILITIES AT AF STATION HASIMARA

Amount

SCHEDULE 'A' PART- I (BUILDINGS/STRUCTURES) Details of prepriced Schedule is given in tender documents

SCHEDULE 'A' PART- II (INTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents.

SCHEDULE 'A' PART- III (AREA DRAINAGE) Details of prepriced Schedule is given in tender documents.

SCHEDULE 'A' PART- IV (SEWAGE DISPOSAL) Details of prepriced Schedule is given in tender documents.

SCHEDULE 'A' PART -V (MISCELLANIOUS ITEMS/ADDN/ALTN TO BLDG) Note:- This schedule is not pre-priced by MES.

INTERNAL ELECTRIFICATION S&F wall mounted automatic Hand Dryer ABS body low noise electrically operated, 230V, 50 Hz Ac supply,complete, all as specified and as directed.

ADDN/ALTN TO BLDG (B/R PORTION) Taking down cement plaster any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

Taking up or down GI tubing of 15mm bore and connections, including cleaning for refixing or removal to store, complete all as specified and directed.

Taking down chowkats or frame, n.exc 1.5 Sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed.

Taking down chowkats or frames, exe 1.5 but n.exc. 4 Sqm in each with shutter (without taking off shutter from the frame) complete all as specified and directed.

Taking up or down GI tubing of 20mm bore and connections, including cleaning for refixing or removal to store, complete all as specified and directed.

Dismantling of water tanks from roof /stagging etc and removing from site etc exc 250 but n.exc 500 Ltrs capacity, complete all as specified and directed.

Dismantling of water tanks from roof /stagging etc 3m and removing from site etc exc 500 but n.exc 1000 Ltrs capacity,complete all as specified and directed.

Demolition of Brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for and removing the debris and rubbish to a distance not exceeding 100 m, complete all as specified and directed. (Note : reinforcement cut as required to facilitate demolitions)

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness, (Below or above ground level) and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 m, complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for and removing from site of work complete all as specified and directed

Complete removal of existing treatment on wall surfaces all as specified and directed

M&L Brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement, complete all as specified and directed.

M & L for rendering 15 mm thick in cement mortar (1:4) in two layers (10 mm thick in first layer and 5 mm thick in second layer) finished even and smooth (without using extra lime or cement) mixed with water proofing compound as per manufacturer’s instruction on top/second layer of plaster, complete all as specified and directed. (Note : WPC will be measured & paid separately).

M&L for rendering 5mm thick in cement mortar 1:3 on ceilling and soffits of staircase waist slab or concrete surface finished even and smooth without using extra cement, complete all as specified and directed.

M & L for 2 mm thick wall care putty on wall , complete all as specified and directed

M & L for preparation of new plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of priming paint complete all as specified and directed

M & L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed

M & L for Finishing walls with Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including preparation of surface, complete all as specified and directed

M&L for joint free coloured non skid ceremic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 Sqm but n.exc 0.18 Sqm, in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:6, complete all as specified and directed

M&L for coloured glazed ceramic tiles of size 350x250x7mm/450x350x7mm to 8mm thick in vertical surface set and jointed in neat cement slurry pointed with white or coloured cement match over and including 10mm thick rendering in cement plaster 1:4, complete all as specified and directed.

M&L scratch free, light shade, vitrified designed , coloured tiles, 10mm thick (square/rectangular) polished, area of each tile n.exc 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile over and including 15mm thick screed bed in cement mortar1:6 complete all as specified and directed.

M&L scratch free, light shade, vitrified designed , coloured tiles, 10mm thick (square/rectangular) polished in vertical surface, skirting/Dado etc area of each tile n.exc 0.36 Sqm, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tille over and including 10mm thick rendering in cement plaster 1:4 complete all as specified and directed.

S&F 3mm thick PVC tiles/ sheets, laminated plain coloured, marble, mosaic or mottled finish, laid with approved rubber based adhesive in floors, complete all as specified and directed.

S&F 3mm thick PVC tiles/ sheets, laminated plain coloured, marble, mosaic or mottled finish, laid with approved rubber based adhesive in vertical surfaces complete all as specified and directed.

M&L for non asbestos, Fibre cement reinforced board high pressure steam cured (Design-Oceanic or as approved), pre painted self finished white/ivory colour , 4mm thick size (595mm x 595 mm ) with hot-dip GI heavy duty suspended ceiling grid system T-2430 with GI frame work for seamless ceilling comprising of GI perimeter channel, unequal flanges and web etc of suitable size suspended from soffit at approx 900mm center with GI cleat and steel expansion fastener with and including ceilling section including hangers 6mm dia GI fixed to roof by means of ceilling cleats made out of GI flat all as per manufacture's instructions complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on wall to make PVC frame, complete all as specified and directed.

S&F solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification, complete all as specified and directed.

Supply only liquid water proofing compound approved quality, complete all as specified and directed..

Roughening surface of old concrete roof by picking, sweeping clean and washing down with water using wire brush brooming down and applying the following treatment all as directed in order of precedence as stated :- (i) Rendering 15mm thick in CM (1:4) on existing roof surface true to level. ii) Applying one coat of bituminous primer @ 0.40 Ltr/Sqm. (iii) Supply and laying 3mm thick APP based polymeric membrane of approved manufactured with weight not less than 3.60 Kgs per Sqm reinforced with non-woven polyester fabric/matt weighing not less than 160gms per Sqm having softening point not less than 150 mm centigrade, having tensile strength of 650 N/5cm and 350 N/5cm in longitudinal and transverse directions respectively of the reinfocred tearing strength of 180 N by torch application . Polymeric membrane shall be taken to a height of 30cm(minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. Note :- (i) Laying APP based polymeric membrane shall be done torch on method as per manufactures instructions. (ii) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturers instruction. iii) APP based polymeric membrane shall be of any one of the approved makes as specified here-in-after and shall conform to specifications given in IS 16540-2017/IS 16532-2017.

(iv) Contractor shall produce necessary test certificate of the manufacturer to the Engr-in-Chage before incorporation in the work. (v) Necessary independent tests shall also be carried out by the Contractor without any extra cost to the Deptt as per relevant IS specifications and membranes with satisfactory test results shall only be incorporated in the work (vi) The work shall be executed through authorised applicators of original manufacturer only

M & L Cement concrete tiles of size 25cm x 25cm x 22mm thick, machine pressed, with grey cement and no pigment set, jointed and pointed in neat cement slurry on roof over APP membrance laid over and including 10mm thick cement screed bed in cement mortar 1:6 with WPC 3% by weight of cement or as per manufacturer's instructions, joint of tile shall be filled with slurry mixed with water proofing compound ,all as specified and directed. (Note : WPC shall be measured and paid separately

M&L Reinforced cement concrete M 25 (Design Mix) using 20mm graded aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed (Note : Reinforcement and form work will be measured and paid separately under relevant items)

M&L Reinforced cement concrete M-25( Design Mix) using 20mm graded aggregate in Chajjas complete all as specified and directed

M & L for Precast reinforced Cement Concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar 1:4 including necessary formwork, moulds, etc complete all as specified and directed. (Note : Reinforcement shall be measured and paid separately)

M & L for Plain Cement concrete 1:3:6 , type C -1 (using 20 mm graded crushed stone aggregate) in surface channels and drains complete all as specified and directed.

M & L for steel formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc (fair finished flat surfaces) complete all as specified and directed.

M & L for steel form work to soffits of suspended slabs such as roof slabs, floor slabs, landings chajja and similar work; not exceeding 200 mm thick (Horizonal or sloping) for flat surface (Fair finished surfaces ) complete all as specified and directed.

S & F TMT steel bars 10 mm dia., and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

S & F Mild steel TMT bars 5mm dia and over upto and including 10mm dia in strirrups, spacers and binders spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and directed.

S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc as specified erected in position and securing runners with holdfasts and brackets, complete all as specified and directed.

S&F ' in repair' 2 layers of 12mm thick tinted float glass panes toughened with gap of 12mm. The space shall be sealed hermetically and entrapped with air shall be dehydrated with drying agent, complete all as specified and as directed. (Note : 02 layers of glass shall be measured as one unit)

S&F 12mm thick toughened glass exc 0.50 sqm in each panel, matching with existing design including all accessories of glass door, complete all as specified and as directed.

M & L for Powder coated aluminium frame for doors,windows, ventilators with one or morerebates including joining cleat for fixing etc including Powder Coating (minimum thicknessof powder coating 50 micron) complete all as specified

M & L for powder coated aluminium door shutters,aluminium section weighing 0.55 kg/m (minimum thickness of powder coating 50 micron)including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. powder coating of any colour complete all as specified and directed. (Note : Sheet glass / panel board shall be measured and paid under respective item)

M & L for Powder coated aluminium partitions,(minimum thickness of powder coating 50 micron)aluminium section including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beadingscrews etc. powder coating of any colour, aluminium partition shall have main frame , panel of size not exceeding 1200mm , section size 20072 of Jindal or equivalent (63.50mm x 38.10mm and 1.53mm thick, weight 1.095 Kg/RM) . The sub divided sections shall be 20073 of Jindal or equivalent), complete all as specified and directed. (Note : Sheet glass/panel board shall be measured and paid under respective item)

M & L for mild steel Framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walkways; railings; frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M & L 'in repair' for 12 mm thick, Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F 5.5mm thick Sheet glass, ordinary quality and glazing in aluminium section in square exc 0.5 sq. m in each pane complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and directed.

S & F 4 mm thick, sheet glass, ordinary quality and glazing with oil putty or wooden beading in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S & F Well seasoned 2nd class hard wood plain, solid, straight chowkat and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S & F 35 mm thick, 2nd class hardwood, factory made, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F 30 mm thick, factory made, Second class hardwood, glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, etc complete all as specified and directed in SSR Part I Section 8 clause 8.24 (b).

S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F ' in repair' Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M & L for Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed.

S & F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded, plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, as per specification and drawing and as directed.

S & F 150 mm long, Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 100 mm long, Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 300mm long Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

S & F 100 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S & F 75mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.

S & F 150 mm size, Aluminium handles, cast type, anodised complete all as specified and directed.

S & F ' in repairs ', Aluminium (Die cast) body door Closer hydraulically regulated, designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and directed.

S&F mild steel Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L for plain cement concrete type B1 (1:2:4) (using 20mm graded stone aggregate) as in hold fast block including necessary form work complete all as specified and directed.

S&F rolled mild steel in fire exit (framed), trussed purlins, crane gantries, rails and fast things and heavy bracket framing (beam, tee, angle, channel or flat section) including distance pieces cleats etc Fe-410-W(Gde E-250) quality-A with one shop coat of zinc chromate primer paint complete all as specified and directed.

Refixing 15mm old steel tubing obtained from Srl Item No 5.03 here in before with all connections ,i.e, tees, bend, elbow, union,sockets etc in new or old position (Walls, ceiling, floors, etc.)complete all as specified and directed. (Note : Rate shall be inclusive of all new connections/fittings required)

Refixing 20mm old steel tubing obtained from Srl Item No 5.06 here in before with connections ,i.e, tees, bend, elbow, union,sockets etc in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed. (Note : Rate shall be inclusive of all new connections/fittings required)

S&F GI tubing of 15mm dia medium grade with all fitting and fixed complete to walIs and ceilings or laid in floors complete all as specified and directed.

S&F GI tubing of 20mm dia medium grade with all fitting and fixed complete to walIs and ceilings or laid in floors complete all as specified and directed.

S&F ' in repair' 20mm bore dia gun-metal. Globe or gate valves with iron wheel head screwed both ends for iron pipes complete all as specified and directed.

S&F ' in repair ' 15mm bore dia gun-metal globe or gate valves with iron wheel head screwed both ends for iron pipes complete all as specified and directed.

S & F 500 litres capacity rotational moulded polyethylene (HDPE) water storage tanks (Cylindrical vertical with closed top), ISI Marked, conforming to IS 12701-1989 having triple layers wall construction with manhole threaded lid and suitable locking arrangement including making holes for inlet, outlet and over flow pipes,hoisted and fixed in position complete all as specified and directed.

S & F 1000 litres capacity rotational moulded polyethylene (HDPE) water storage tanks (Cylindrical vertical with closed top), ISI Marked, conforming to IS 12701-1989 having triple layers wall construction with manhole threaded lid and suitable locking arrangement including making holes for inlet, outlet and over flow pipes,hoisted and fixed in position complete all as specified and directed.

S & F 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 210 gms) complete all as specified and directed.

S & F ' in repair' 15 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 142 gms) complete all as specified and directed.

S & F ' in repairs' Vitreous China wash basin, white, flat back, size 630x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed

S & F 'in repairs' Vitreous China bowl urinal flat back, of size 465 x 355 x 265mm, white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe & waste pipe) including Urinal spreader, providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete complete as specified and directed.

S & F ' in repairs ' vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and flushing pipe, anti syphonic pipe with seat and cover complete but excluding flushing cistern & flush pipe including making good damaged/disturbed surfaces complete all as specified and directed.

S & F 'in repairs '10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S & F ' in repairs ' Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified and directed

S & F 'in repair ' 32 mm dia Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S & F ' in repairs ' 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends complete all as specified and directed.

S & F ' in repairs' stainless steel sinks made of 1 mm thick sheet with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F ' in repairs' 15mm bore, Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm125gms complete all as specified and directed.

S&F fancy type 15mm bore chromium plated bib tap, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F ' in repairs ' fancy type 15mm bore chromium plated stop valves with long shank and cup (concealed type), cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

M & L for preparation of new steel surface on steel and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed

S&F Pillar taps,15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed fency type complete all as specified and directed.

S&F Brass CP mixer, 15mm bore for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F 'in repairs ' flush pipe of chromium plated brass tube,32mm dia, for low level cisterns, complete all as specified and directed

S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) complete all as specified and directed.

S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.

S & F ' in repair ' grating round 140 mm size of PTMT (Minium weight 50 gms) complete all as specified and as directed.

S & F ' in repairs ' cast iron nahani trap 100 mm dia with grating including jointing to waste pipe fixed in cement mortar 1:2:4 type B2 using 20mm graded aggregate complete all as specified and as directed.

S&F Stack clamps for 100mm bore pipes out of 50 mm by 5 mm flat iron and 16mm dia each round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S & F 110 mm bore, PVC (SWR), Soil waste and vent pipes in any length with or without ears, with cement joints fixed to wall, etc with all necessary fixing arrangement complete all as specified and directed.

S & F 110 mm bore, PVC (SWR) bends of any radius complete all as specified and directed.

M&L for 75mm thick plain cement concrete type C2 (1:3:6) (using 40mm graded stone aggregate) in sub base flooring / plinth protection / hardstanding etc finished even and smooth without using extra cement complete all as specified and directed.

M & L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

S&F rolled mild steel joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) of grade Fe 410 -W (Gde- E- 250) quality-B complete all as specified and directed.

S&F mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of grade Fe 410 -W (Gde- E- 250) quality-B complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L MDF perforated acoustic panel12mm thick for sound absorbers, including necessary fixing arrangement on wall/ceiling, self finished with surface finishes complete all as specified and directed.

S&F 15mm thick thoughened glass Door, as directed by Engineer-in-charge including all accessories/fittings,glass door rails if any, floor/hydraulic springs, fittings/fixtures, locking system if needed,handles etc complete all as specified and directed .

M & L Brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

S & F TMT steel bars 6 to 8 mm dia., and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

M&L 20mm thick Granite (of any type) machine cut, bedded and jointed with grey cement slurry and pointed with white or coloured cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L 20mm thick Granite (of any type) machine cut, in skirting/ dado laid over and including 10mm thick rendering in cement mortar 1:4 and jointed with grey cement slurry, and pointed with white or coloured cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

ADDN/ALTN TO BLDG (E/M PORTION) Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Taking down SPN /TPN DB complete carefully with MCB and all connecting items and re-fixing of the same as per Engineer-in-Charge direction and makiing good to the disturbed surface complete all as specified and directed.

Taking down fan any type , sealing cable end, dismantling blades and removing fan and blades to store complete all as directed

Taking down unservicable main switches MCB's DB's etc any type and capacity including making good the disturbed surfaces to match the existing complete all as directed .

Dismantling existing serviceable LT UG cable of size up to 16/25/35/50/95 Sq mm Sq mm 3.5 Core layed on wall , ceiling and refixing the same after repair work as directed.

M & L for point wiring for One light point / one fan point controlled by one, one way swtich complete as specified with 1100 V grade with 1.5 Sqmm single core PVC insulated unsheathed FR-LSH cable, copper conductor multistranded passing through including PVC conduit(medium grade) concealed on wall/floor and surface type on ceiling of size not less than 20mm dia with concealed modular box suiltable for logic modular switches, sockets, etc and logic modular white plates, sourroundings of suiltable size as required at site with PVC insulaterd FRLS unsheathed stranded copper conductorof size 1.5 sqnn as earth wire connected to common earth dolly as specified complete all as specified and directed for the following :- Note :- (i) Rate quoted shall include for cost of making concealed MS box in stone/brick wall including cutting and sinking of boxes and making good to the stone/brick walls (No extra payment will be made for the same. (ii) Provision of blank plates as per site requirement (No extra payment will be made for the same)

All as per Srl item No.6.27 here in before but for One 5 Amp 5 pin socket outlet point on same board complete.

All as per Srl item No.6.27 here in before but on independent board complete.

All as per Srl item No. 6.27 herein before but with 4.0 Sqmm PVC copper stranded cable FRLS type for one 15 Amp 6 pin socket outlet point including PVC cable 4.0 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to commen earth & earth terminals including boards for mounting purposes complete.

All as per Srl item No.6.27 here in before but one bell/buzzer point controlled by one push button on the same board with other switches or independent complete.

Cutting chases, pinning in, making good to facings in stone concrete wall / blocks / slab/brick wall where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring, etc, and making good, cutting exc 10 cm but n.exc 20 cm girth complete all as specified and directed.

S & F Switch modular type, single pole, one way, 5/6 Amp, one module, IS:3854 marked with valid CML No complete all as specified and directed.

S & F Switch modular type, single pole, one way, and 15/16 Amps, one module IS:3854 marked with valid CML No complete all as specified.

S & F socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, two module, modular type IS-1988 marked with valid CML No complete all as specified and directed.

S& F socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin 5/6 Amp, modular type IS-1988 marked with valid CML No complete all as specified and directed.

S & F Switch modular type, single pole, Bell push, 5/6 Amp, one module,IS:3854 marked with valid CML No complete all as specified and directed.

S & F in replacement of bell, ding dong type AC, 230 volts, single phase complete all as specified and directed.

S & F power unit 32 Amps starter (4 module) including 25 Amp socket including concealed mounting on stone wall/brick wall complete all as specified and directed.

S&F White cover plate with frame, 3 module, including modular metal flush box, 3 module complete all as specified and directed.

S&F White cover plate with frame, 4 module, including modular metal flush box, 4 module complete all as specified and directed.

S&F White cover plate with frame,6 module, including modular metal flush box, 6 module complete all as specified and directed.

S&F in replacement of ceiling rose of size 65 x 50 mm surface bakelite 240 Volts three terminal complete as specified and directed.

S&F in replacement 35/36W LED (Size 2'x2') square shaped surface mounting luminaire suitable for hanging on any surface including connecting twin core copper cable up to ceiling rose complete with separate electronic driver & high brightness LEDs white colour complete all as specifed & directed .

S&F in replacement 20W LED fittings (4’ long) Natural white (6000K), wall mounted including warm white LED Tube rod extruded thermmally conductive mtrls, aluminium heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffused, complete all as specified and directed.

S & F LED lights fitting 1x 16W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose up to 1.5Mtr length complete all as specified and directed.

S & F ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Energy efficient, five star rated, with brushless direct current motor (BLDC) complete with mounting arrangment as per site requirement and connecting wire up to nearest ceiling rose in flexible PVC pipe complete all as specified and directed.

S & F energy efficient 5 star rated 300 mm heavy duty metallic body exhaust fan, 1400 RPM complete with louvers and making hole to the existing wall, making good to the disturbed surface as per existing and connecting wire up to nearest ceiling rose in flexible PVC pipe complete all as specified and directed.

S & F Fan step Regulator modular type, two module, IS:3854 marked with valid CML No complete all as specified and directed.

S & F energy efficient 5 star rated 450 mm sweep wall mounted Air circulator fan including all fixing material and connecting wire upto nearest point including flexible PVC pipe complete all as specified and directed.

S&F VTPN 6 WAY prewired distribution board TPN-DPX 160 MCCB including one No MCCB 160 Amps as incomer and suitable SPN/TP MCBs as outgoing double door type sheet metal enclosure 415V with 200 Amps rated standard busbar of suitable size plate and common neutral link without MCBs with blank plate suitable for 4 way complete all as specified and directed Note : Rates of MCCB and MCB SPN/SP/TP will be measured and paid seperately.

S & F MCCB 3 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA complete all as specified and directed.

S & F Distribution board TPN 4 way for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 415V, 50 Hz supply double door MCB 4 pole and incomer and SP& SPN As outgoing complete all as specified and directed.

S&F MCB TPN 63 Amps 415V incl all termnials, fitting etc. complete all as specified and directed.

S&F MCB TP 63 Amps 415V incl all termnials, fitting etc complete all as specified and directed

S & F Distribution board SPN 12 Way for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door complete all as specified and directed

S & F Distribution board SPN 8 Way for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door complete all as specified and directed

S & F Distribution board SPN 4 Way for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door complete all as specified and directed.

S & F Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB 20 Amp complete all as specified and directed.

S & F RCBOs for Earth leakage , over load and short - circuit protection 32 Amp DP 100 mA complete all as specified and directed.

S & F RCBOs for Earth leakage , over load and short - circuit protection 40 Amp DP 100 mA complete all as specified and directed.

S & F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning ( I/C CB to light and power Ckts) complete all as specified and directed

S & F MCB SPN 6 to 32 Amp ,10 KA 'C' series complete all as specified and as directed.

M&L for submain wiring with 2X4.0 SQMM+1X4.0SQMM Earth Wire single core PVC insulated FRSL sheathed cooper cable connecting to common earth dolly in and including heavy duty PVC casing & caping /Concealed Conduit as per site requirement and direction by EIC, all accessories complete all as specified and directed. Note:- (i) Three runs of 4.0 Sqmm copper wire and 1 run of PVC conduit/casing caping shall be measured as one unit. (ii) Wherever cutting required for concealed conduits shall be measured and paid under respective item.

M&L for submain wiring with 2X6.0 SQMM+1X6.0SQMM Earth Wire single core PVC insulated FR-L-SH sheathed cooper cable connecting to common earth dolly in and including heavy duty PVC casing & caping /Concealed Conduit as per site requirement and direction by EIC, all accessories complete all as specified and directed. Note:- (i) Three runs of 6.0 Sqmm copper wire and 1 run of PVC conduit/ casing caping shall be measured as one unit. (ii) Wherever cutting required for concealed conduits shall be measured and paid under respective item.

M&L for submain wiring with 2X16.0 SQMM+1X16.0SQMM Earth Wire single core PVC insulated FR-L-SH sheathed cooper cable connecting to common earth dolly in and including heavy duty PVC casing & caping /Concealed Conduit as per site requirement and direction by EIC, all accessories complete all as specified and directed. Note:- (i) Three runs of 16.0 Sqmm copper wire and 1 run of PVC conduit / casing caping shall be measured as one unit. (ii) Wherever cutting required for concealed conduits shall be measured and paid under respective item)

M&L for submain wiring with 4X10.0 SQMM+1X10.0SQMM Earth Wire single core PVC insulated FR-L-SH sheathed cooper cable connecting to common earth dolly in and including heavy duty PVC casing & caping /Concealed Conduit as per site requirement and direction by EIC, all accessories complete all as specified and directed. Note:- (i) Five runs of 10.0 Sqmm copper wire and 1 run of PVC conduit / casing caping shall be measured as one unit. (ii) Wherever cutting required for concealed conduits shall be measured and paid under respective item.

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 20 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion complete all as specified and directed

M & L Earth continuity conductor or mainearthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 2mm dia galvanised iron or steel wire complete all as specified and directed.

S & F or Passing through pipe, XLPE insulated, Armoured, Electric power UG cable (Heavy duty) 50 Sq mm 3.5 core including Brass compression cable gland, terminal lug etc and testing including fixing arrangment on stone wall / cable tray with cable tie complete all as specified and as directed

S & F and laying double walled corrugated (DWC) HDPE duct pipe of 40mm dia conforming to IS, approved colour complete with fittings for cable protection including cutting to the existing wall and drawn into wall for laying of cable complete all as specified and directed.

S& F in repair energy efficient ‘LED Flood Light 200 W LED luminaire with Aluminium PDC housing, toughened glass cover with IP65 protection including fixing arrangment as per site requirement and connecting copper wire 3 core 2.5 sqmm in PVC flexible conduit complete all as specified and directed.

Supply and installation, testing and commissioning of microwave technology based occupancy sensor having high performance non regulating programmable type using remote, suitable for connecting load upto 25 Amps complete with suitable contactor to be fixed inside the room, ceiling with mounting height upto 2.6mtr and 6 mtr coverage area with all necessary arrangements and electrical connections including cabling etc complete programming for sensor based lighting system all as specified and as directed. Note : (i) The contractor shall visit site before quoting the item and plan the system in suitable manner for sensor lighting system (ii) Any misc items required for completion of sensor lighting system other than above is deemed to be included for complete system. No extra payment will be entertained on this account.

Supply and install Cassette type air conditioning units 5 star of capacity 3.7 TR indoor/outdoor mounted on ceiling complete with scroll compressor energy efficient, Non CFC refrigerant, air flow : 565/600/670/740 sound level 46/42/39 dB, contemporary grill design, auto fan mode, 3 phase reverse protection PCB, 4 way air flow, outdoor noise level not more than 26 dBA including complete concealed piping arrangement complete with cordless remote control unit and with in built Heating and Cooling arrangement and Digital Inverter twin rotary compressor, complete all as specified and directed ( Note : The quoted rate includes necessary fixing arragement for indoor and outdoor units and copper tubing upto 6.00 mtr length, brazing, welding including insulation, complete charging of refrigerator gas upto required level and filling the cavities on wall and setting of grill alignment and including testing & commissioning, complete all as specified and directed )

Supply and install hi wall split units 2.0 TR indoor/ outdoor complete with cordless remote control unit and with cooling and heating, air flow rate not less than 675 cub ft per min, 5 star rated inverter type with non CFC refrigerant, auto swing, LED display, noise level not more than 42 db function complete with concealed piping arrangment, mounting arrangmet of indoor and outdoor including wall bracket etc complete all as specified and directed. (Note : (i)Condensate drain pipe of best quality to be provided and fixed in suitable manner till ground level (ii) The quoted rate includes necessary fixing arragement for indoor and outdoor units and copper tubing upto 6.00 mtr length, brazing, welding including insulation, complete charging of refrigerator gas upto required level and filling the cavities on wall and setting of grill alignment and including testing & commissioning, complete all as specified and directed )

S&F 4 Way Busbar Chamber of size 1 mtr x 1 mtr x 0.60 mtr with set of 04 Nos copper busbar 500-630 Amps rating with indication lamp (R-Y-B), supported with suitable size as per direction, each of heavy duty porcelin stand lock with suitable size of brass nut, bolts and washer with heat shrinkable PVC sleeving. The bar shall be colour coded (red, yellow and blue) for three phases and black for neutral, The Chamber shall be fixed 60 cm above the normal ground level complete with PCC foundation (1:2:4 ) type B2 complete all as specified and directed.

S& F in possition Heavy duty hot dip galvanised powder coated cable trunking perforated type without cover of the sizes 300 mm wide x 50 mm wall height cable tray for supporting 1100 Volts grade armoured/ unarmoured aluminium/ copper conductor cables, fabrication from angle and perforated 2mm (14 SWG) thick M.S. CRCA sheet powder coated with expansion coupler plates duly galvanised, with bolts, washer and nuts, knock out holes for cable connections as per approved disign. the tray shall comply with the specification of NEC (National Electric Codes) and NEMA ( National Electric Manufacturers Association) the steel shall be as per IS: 226 and galcanising as per IS: 2629/BS 729/ASTM 123 including taking down of existing cable of carefully and fixing the cable on cable tray complete all as specified and directed

S & F cable tray/bus bar fixing supports and other steel work including MS flats, angles, T iron, channel etc. cutting drilling holes/welding in MS members as per the site requirements, duly painted the supports with 2 coats of synthetic enamel paint over a coat of primer, including provision of dash fasteners and other fixing accessories complete all as specified and directed

M & L for PVC Bus trunking system 105 mm X 50 mmcomplete including modular switches, power sockets complete for 2/3 module,alongwith angle, flat junction, end cap etc complete with bus bar trunking system fixed on wall with all accessories complete all as specified and directed. Make : Legrand/L & T/C & S

Taking down the split /Window A/c unit from existing position from any height, capacity 1.5/2.0 Ton of any make deposited to store all as directed.

Refixing the old window type AC of capacity 1.5/2.0 TR , complete charging of refrigerator Gas up to required level and filling the cavities on wall setting of grills alignment complete including testing & commissioning complete all as specified and directed. (Note : (i) Addition/alteration for fixing of ACs are deemed to be included in the quoted rates. (ii) Condensate drain pipe of best quality to be provided and fixed in suitable manner till ground level)

Refixing the old split type AC unit of capacity 1.5/2.0 TR capacity by fixing the indoor and out door unit in position as directed including connecting with replacement of copper tubing up to 3.0 Mtrs length brazing , welding including insulation, complete charging of refrigerator Gas up to required level and filling the cavities on wall setting of grills alignment complete including testing & commissioning complete all as specified and directed. (Note : (i) Addition/alteration for fixing of ACs are deemed to be included in the quoted rates. (ii) Condensate drain pipe of best quality to be provided and fixed in suitable manner till ground level)

Dismantling earthing strip (copper/Aluminium) and refix the same complete as directed

Dismantling air termination single pointed copper rod complete as directed

Refixing the old serviceable air termination single pointed copper rod obtained from dismantling, complete as specified and directed

M & L earthing complete with copper earth plate electrode of size 60 cm x 60 cm x 3.15 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below the normal ground level connected with Copper strip 32 x 6 mm by means of bolts, nuts, check nuts & washers of galvanished iron steel including necessary excavation and earth work in any type of soil, removing surplus soil to a distance not exc 50 m, with and including PCC chamber in PCC (1:2:4) , type B1, using (20 mm graded stone aggregate), mild steel angle iron frame made out of MS angle iron of size 40x40x6 mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6mm thick CI cover with handle, watering arrangement with funnel internally secured with wire mesh with 20 mm dia medium grade pipe for watering ,40 mm dia light grade GI pipe for lead protection in & including copper - sulphate e all as shown in electrical plate No 5 and connected to earthing test point all as specified and indicated including testing on completion and marking of description of earthing on GI plate grouted on the earth chamber complete all as specified and directed.

S & F air termination single pointed copper rod 12 mm dia and 300 mm long with necessary fixing arrangement on roof complete all as specified and directed.

M & L for test point terminal block made of phosphorus bronze size 75 x 75 x 25 mm thick drilled and screwed including 3 Nos 8 mm dia 25 mm long hexagonal head screws fixed to copper strip bracket fixed to porcelain insulator in wall as in repairs, complete all as specified and directed

M & L for Copper strip 20 x 3.15mm with saddles and fixing screws etc. for roof conductors with rubber & bitumen washer & fixed to porcelain insulator, brazing of copper strips overlapping of not less than 10cm on wall for down conductor complete all as specified and directed

S & F porcelain vitreous white/brown/green spacers insulator of size 75mmx35mmx40mm height complete with one number galvanized iron stud bolts 6mm dia x 40mm long including nut & washers and two number galvanized iron fixing bolts of size 6mm dia and 50 mm long including washers and drilling holes for holding /foxomg aluminium strip/roof conductor as required including taking down the broken insulator complete all as specified and as directed by the Engineer-in-Charge.

S & F 40mm bore GI tubing, light grade, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and directed.

Sch 'A' Part-V SCHEDULE OF CREDIT Note :- Amount of Rs. 85775.00 indicated in Tender Documents as Schedule of Credit shall be deducted from the total quoted amount of BOQ.

M/S Sohanlal Agarwala

DEEP NIRMAN

HARBHAJDAS AGARWAL

M/S. KUMAR CONSTRUCTION CO.