REPAIR AND MAINT OF LT OH LINE, UG CABLE, LT PANEL ETC IN

Amount

Dismantling carefully the existing U/S LT Overhead line ACSR conductor of any size from its position by necessary disconnecting of conductor complete all as specified and directed by Engr-in-Charge.

Supply and stringing, stretching and fixing ACSR conductor for over head line securing on pole complete including binding wire, jointing sleeves aluminium tap and PG clamp etc of any size all as specified and as directed.

Fixing only/stringing only old dismantled ACSR conductor for over head line securing on pole complete including binding wire, etc of any size complete all as specified and as directed.

Note for item 02 & 03 Jumper on cut point/2 pole structure/4 pole structure shall be provided with PVC insulated sleeves. Rates shall be included of jumper and tree branch cutting to make safe distance from Pole /OH line.

Removing /opening of binding from shackle/pin insulator and restringing of single conductor, tightening of LT over head ACSR/copper conductor any size including binding with copper/aluminium binding wire to over head conductor including renewal of jumpers complete all as specified. Note:- Rates shall be included of jumper and tree branch cutting to make safe distance from pole /OH line.

Dismantling existing u/s guard wire with cradles of any size from LT OH line and removing from site of work complete all as directed by Engr-in-Charge.

S&F GI steel continuous earth wire & cradle 4mm dia on cross arms of poles for guarding including binding with aluminum wire 16 SWG etc, complete all as specified and directed by Engr-in-Charge.

Dismantling of U/S insulators of any size and type complete from its position and removing all as directed by Engr-in-Charge.

Fixing only old LT pin type insulator obtained from item No 7 above.

Fixing only old LT shackle type insulator obtained from item No 7 above.

S&F pin type, porcelain virteous, white, brown or green insulator 100mm height, 65mm dia for 1100 Volts grade, including one GI MS spindle, two GI washers, one GI nut complete all as specified and directed by Engr-in-Charge.

S&F LT shackle type, porcelain virteous White, Brown or Green insulator 90mm dia, 75mm height, including GI MS straps of Size 31 x 3 mm washers, 12mm dia, bolts suitable for 1100 volts grade complete all as specified and directed.

Dismantling of u/s stay assembly carefully including stay wire necessary excavation and earth work in any type of soil, demolition of PCC of any type and removing rubbish to as distance n. exc 50m at low lying area complete all as specified.

S&F stay assembly complete with accessories and stay rod 16mm dia and 180 cm long, including ms galvanized stay plate 300 mm x300 mmx6mm and galvanized thimble complete all as specified and shown in electrical plate No 1. of SSR 2010 ( Part-I ) Note:- (loop type insulator, stays clamps, excavation and earth work and concrete shall be measured and paid separately).

S&F loop type insulator porcelain virteous, White, Brown or Green & with over all dimension 65 x 90 mm, clearance of hole. 16mm vitreous,porcelain, white, brown or green complete all as specified and directed including removing of existing unserviceable from its position.

S&F in repairs galvanized steel wire stranded of size 7/2.24mm including necessary binding strengthening complete all as specified and directed.

Dismantling of u/s existing cross arms by means made from channels, angles, U/S FI clamps, nuts, bolts etc, from OH line complete all as specified and directed.

M&L Cross arms, bracings, supports, clamps and back plate fabricated from structural steel sections including nuts, bolts, in any shape or size as indicated or directed and including two coats of aluminium paint over a coat of red oxide complete all as specified.

-Ditto- all as sper item No 17 above but fixing old existing cross arms received against item No 16 above including cleaning, removing stain and including preparation of old steel surfaces applying two coats of aluminum paint over and including a coat of Red oxide (primer) all as directed by Engr-in-Charge.

Dismantling of existing u/s steel LT poles of any size & type from its position carefully and removing from the site and including necessary excavation and earth work in any soil/strata, demolition of concrete, disconnection of conductor from pole etc. complete all as directed.

Supply and install steel, tubular swaged poles complete with cast iron base plate, finial taper plug nuts and taper plug , bolts, nuts and screws as specified type 410-SP- 31 (9.0 m long) complete all as specified and directed. Note : Excavation, earth work shall be measured and paid separately.

Dismantling/taking down steel tubular/pcc pole of any size including insulater & cross arm& stay wire & refixing at new location directed by Engr-in-Charge. Note :- Excavation, earth work & PCC shall be measured & paid separately.

Excavation in trenches for laying of cables ,poles and stay in any type of soil not exceeding 1.5 mtr wide and n. exc 1.50 mtr deep, n. exc 10 Sqm on plan and getting out complete all as specified and directed.

-Ditto- all as per item No 22 above but depth exc 1.5 mtr and n. exc 3.00 mtr deep and getting out.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc. 25cm complete all as specified and directed by Engr-in-Charge.

Removing excavated soil n.exc 50 mtr and depositing where directed at a level n. exe 1.5mtr above the starting point complete all as specified and directed.

M&L for Plain cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation of poles etc complete all as specified.

M&L for Plain cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete for stays,foundation and platform for transformer installation complete all as specified.

M&L for Plain cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate for coping of pole with and including formwork complete all as specified and directed.

S&F in repairs 1100 Volts grade line composite phase separators, moulded & bolted type as per IS 1445 - 1997 suitable for the following :-

Taking down u/s LT U/G cable (including all mounting accessories, bricks and sand etc ) from trenches, wall, floor etc and removing to store for safe custody upto 25 sqmm complete all as specified and directed. Note:- Excavation for taking out cable will not paid for separately, the cable shall be deemed to have taken down from the trenches excaveted for laying of cables.

Taking down u/s U/G cable (including all mounting accessories, bricks & sand etc) from trenches, wall, floor etc and removing to store for safe custody above 35 upto 120 Sqmm complete all as specified and directed. Note:- Excavation for taking out cable shall not be paid separately, the cable shall be deemed to have taken down from the trenches excaveted for laying of cables.

Taking down u/s LT U/G cable from trenches, wall, floor etc and removing to store for safe custody above 120 to 150 sqmm complete all as specified and directed. Note:- Excavation for taking out cable shall not be paid separately, the cable shall be deemed to have taken down from the trenches excavated for laying of cables

S&F XLPE insulated armoured and PVC sheathed "heavy duty" electric cable with aluminium conductor 1100 volts grade laid in trenches, passing through pipes /ducts including testing complete of following cross sectional area of the following sizes:- Note:- Rate is inclusive of cable gland & cable lugs. The contractor shall be used old cable route indicator retrietive from item No 30to 32 above. Fixing cost for the same shall be included in the quoted rates of these items. Make : Havells/GLOSTER/Poly Cab/ Paragon

2 core, 4 sqmm cross sectional area

2 core, 6 sqmm cross sectional area

2 core, 10 sqmm cross sectional area

4 core, 16 sqmm cross sectional area

3-1/2 core, 25 sqmm cross section area

3-1/2 core, 35 sqmm cross section area

3 -1/2 core, 50 sqmm cross sectional area

3 -1/2 core, 70 sqmm cross sectional area

3 -1/2 core, 95 sqmm cross sectional area

3 -1/2 core, 120 sqmm cross sectional area

3 -1/2 core, 150 sqmm cross sectional area

S&F in repairs 40mm bore, GI steel tubing "light grade" for cable protection passing under road /floor or for fixing to poles complete all as specified and as directed Make : JINDAL/ZENITH/TATA/PRAKASH

S&F in repairs 50mm bore GI steel tubing "light grade" for cable protection passing under road /floor or for fixing to poles complete all as specified and directed Make : JINDAL/ ZENITH/ TATA/ PRAKASH

S&F in repairs 80mm bore GI seel tubing "light grade" for cable protection passing under road /floor or for fixing to poles complete all as specified and directed Make - JINDAL/ ZENITH/ TATA/ PRAKASH

S&F in repairs RCC hume pipe for road crossing of cables class NP-2 of size 100 mm dia complete all as specified.

Cutting of hardstanding/ Road for laying of pipe line/cable and making good surfaces after lying of pipe line/ cable upto 30cm in depth as per existing specification complete all as specified and directed.

M&L for boring of hole under road/hard standing by trenchless technology including S & F HDPE pipe "heavy duty " of size 100mm bore fixed in repairs complete all as specified and directed.

M&L unwashed Sand cushioning to under ground cable provided with a layer of 8 cm deep before laying and 15 cm covering above the top edge of cable after laying complete all as specified. Note : Measurement shall be done after puning down of sand.

M&L Brick covering with width equal to length of bricks as mechanical protection to cable with well burnt sub class `B` old size bricks laid dry and flat complete all as specified and as directed.

Relaying old dismantaled Bricks covering with width equal to length of bricks as mechanical protection to cable complete all as specified and as directed.

Taking down of faulty LT UG cable of size upto 400 Sqmm from trenches /pole/wall etc for detecting fault including repair and jointing at site including relaying at the same location complete. Note:- Excavation/earth work and cable jointing & jointing kit shall be measured and paid separately under relevent item of schedule.

S&F LT Joint cable, jointing kit straight through joint heat shrinkable type of size 10 Sqmm 4 core to 16 Sqmm 4 core cable size complete all as specified and directed. Make : M Seal/ Denson/Reychem/ Cab seal

S&F LT Joint cable, jointing kit straight through joint heat shrinkable type of size 25 sqmm 3.5 core to 50 sqmm 3.5 core cable size complete all as specified and directed. Make : M Seal/ Denson/Reychem/ Cab seal

S&F LT Joint cable, jointing kit straight through joint heat shrinkable type of size 70/ 95 sqmm 3.5 core cable size complete all as specified and directed. Make : M Seal/ Denson/Reychem/ Cab seal

S&F LT Joint cable, jointing kit straight through joint heat shrinkable type of size120 sqmm 3.5 core cable size to150 sq mm 3.5 core complete all as specified and directed. Make : M Seal/ Denson/ Reychem/ Cab seal

Taking down partly unserviceable/unserviceable security/street/gate/flood light fittings from poles/towers/Perimeter Fencing of any type upto 9 m height by manual or mechanical means and for necessary repair and make srviceable as per complaint given by department (E/M service cell) through job card/complaint register on day to day basis all to the satisfaction of Engr in charge & complete all as specified and directed. Note :- Ballast, Lamp holder, capacitor, ignitor, covers and lamps of required wattage/type shall be measured and paid separately.

Fixing only repaired serviceable fitting of any size, and any make complete all specified and directed by Engr-in-Charge.

S&F in repairs Electronic driver suitable for LED fitting 25 watt Make : Bajaj/Wipro/Havells/Crompton

S&F in repairs Electronic driver suitable for LED fitting 45 watt Make : Bajaj/Wipro/Havells/Crompton

S&F in repairs Electronic driver suitable for LED fitting 60 watt Make : Bajaj/Havells/Philips/Crompton

S&F in repairs Lamp holder porcelain suitable for street light fitting Screw type E-40 base. Make : Bajaj/ Havells/Philips/Crompton

S&F in repairs Lamp holder porcelain suitable for street light fitting Screw type E-27 base. Make:Bajaj/Havells/Philips/Crompton

S&F in repairs LED Lamp 40/45 watt type Retro fit E-22 base. Make : Bajaj/Havells/Philips/Crompton

S&F in repairs LED Lamp 30/35 watt type Retro fit E-22 base. Make : Bajaj/Havells/Philips/Crompton

S&F in repairs LED Lamp 20/25 watt type Retro fit E-22 base type. Make: Bajaj/Havells/Philips/Crompton

Taking Down of street light Bracket including clamps of any type/any size from to pole/wall including necessary nut & bolts as directed complete all as specified and directed.

S&F GI pipe bracket made of light Grade tubing of size 40 mm bore, duly bended by hot forgoing length 1.20 mtr including two sets of clamps made of 30mm x 5mm thick Flat iron with GI bolt,nuts & washers complete all as specified and directed.

S&F GI pipe bracket made of light Grade tubing of size 32 mm bore, duly bended by hot forgoing length 1.20 mtr including two sets of clamps made of 30mm x 5mm thick Flat iron with GI bolt,nuts & washers complete all as specified and directed.

M&L for Preparation for surface of existing steel poles including cross arms, nuts, bolts, for painting LT pole 7.5 mtr long above ground level and applying one coat of approved quality of aluminum paint all as directed by Engr-in-Charge.

S&F LED street light lumanaries of size 90 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection. Make: Havells Cat Pt No ENDURAPEARLPLUSSL90WLED757PASYTOPCASTHO or equivelent of Philips or Bajaj

S&F LED street light lumanaries of size 80 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection. Make : Havells Cat Pt No ENDURACITYLINERNEOMPSL80WLED757PASYBOTG equivelent of Philips or Bajaj

S&F LED street light lumanaries of size 60 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection. Make: Havells Cat Pt No ENDURAPEARLNEOSL60WLED757PASYTOPC equivelent of Philips or Bajaj.

S&F LED street light lumanaries of size 45 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection. Make: Havells Cat Pt NoENDURAPEARLNEOSL45WLED757PASYTOPC equivelent of Philips or Bajaj.

S&F LED street light lumanaries of size 25 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection Make: Havells Cat PtENDURAPEARLSL25WLED757SASYTOPCMP equivelent of Philips or Bajaj

S&F in repairs post of lantern fitting made out of black ABS plastic spigot & spun alluminium funnel shaped with clear acrylic cover suitable for 1x20/25w LED lamp including fitting complete all as specified. Make : Havells Cat JUPITERMAXIPT50WLED757PSYMTOPC equivelent of Philips or Bajaj

S&F in repairs sheet metal box of size 60cmx60cmx20 cm for fixing street light timer switch , frame pole mounted type fabricated out of 1.6 MM sheet steel including powder coat painting over a coat of red oxide primer including ,consisting of the following :- (a) MCCB 63 A 25 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu & L&T cat no- CM97919OOH2OG /Legrand cat no-420013/schneider cat no-LV510315 - 2 nos (b) Astronomical, Multifunctional digital time swithces cat no 004767 of legrand or equivalent of L & T cat no- T2 DD T7/MDS/GIC - 1 no. (c )Power contactor ML-4 , 3 pole rating not less than 70 A with 230 coil make L&T/SEIMENS - 1 no. (d) Internal wiring and, clamp - 02 no.made out of 40x5mm flat & angle 40x40x5mm -0.90m long -2Nos. (e ) MCB SP 6 amps-1 No

Earthing complete with galvanized steel earth plate electrode 600mm x600 mm x 6mm buried directly in ground vertically to a depth not less then 2.25 meter below normal ground level with top edge of the plate not less then 1.50 meter below normal ground level connected to galvanized earth wire 4.00mmdia by means of bolts ,nuts ,check nuts and washers complete up to and including test point made out of 40 x 6mm alum flat including earthing pit , charcoal common salt ,Earthing lead 4.00mm dia up to 7.5m, 20mm dia medium grade GI watering pipe ,G.I. protection pipe 15 mm dia up to 7.5m long,,PPC pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate ,PCC pit cover including earth work complete all as shown in electrical plate No-3 of SSR-2009 (Part-I)

S&F in repairs PVC junction box IP 65 Protection of size 0.200 x 0.250 x 0.115 complete with 1 Nos of MCB SP 2.5 Amps & 4 way industrial connector including Clamp made out of MS flat 30X5 mm, connection from junction box to street light fitting with three single core PVC insulated & PVC sheathed wire 2.5 Sqmm copper. Make of Box- SPELS BERG/ SINTEX/ HENSEL

S&F in repairs PVC insulated 3 core 2.5sqmm multistranded COPPER conductor for connection of Security light from JN BOX to Security light /OH conductor to security light all complete as specified and directed Make: FINOLEX/PLAZA/HAVELLS/CCI/PARAGON

S&F in repairs PVC insulated 3 core 1.5sqmm multistranded COPPER conductor for connection of Security light from JN BOX to Security light /OH conductor to security light all complete as specified and directed Make: FINOLEX/PLAZA/HAVELLS/CCI/PARAGON

S&F in repairs Astrorex D-22, Multifunctional digital time swithces Make : Legrand/L & T/ MDS/ GIC

S&F in repairs galvanized earth strip 32 mm x 6 mm for earthing from earth plate to equipment complete fixed on pocelain insulator every 1 meter interval complete all as specified and as directed.

S&F MCCB 630 A 35 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : Legrand/Havells/L&T

S&F MCCB 400 A 35 KA,4 POLE, thermal magnetic relese, Ics=100% Icu complete all as specified Make : L&T Cat Pt No CM98404OOROL or equivelent of Havells/Legrand

S&F MCCB 250 A 35 KA, 4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : L&T Cat PT No CM98065OOPO or equivelent of Havells/Legrand

S&F MCCB 200 A 35 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : L&T Cat Pt No CM98065OONO or equivelent of Havells/Legrand.

S&F MCCB 160 A 35 KA, 4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : L&T Cat PT No CM98065OOMO or equivelent of Havells/Legrand

S&F MCCB 125 A 25 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : L&T Cat Pt No CM90634OOMO or equivelent of Havells/Legrand.

S&F MCCB 100 A 25 KA, 4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make :L&T Cat Pt No CM90679OOLO or equivelent of Havells/Legrand.

S&F MCCB 63 A 25 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : L&T Cat Pt No CM97933OOH2 or equivelent of Havells/Legrand.

S&F in repairs enclosure SUITABLE FOR MCCB TP complete all as specified Make : Legrand/Havells/L&T

Taking down MCCB any type & any size

S&F ON LOAD change over switch 4 pole 400amps with sheet metal enclosure, Make : L&T/ Schneider/Legrand

S&F ON LOAD change over switch 4 pole 315amps with sheet metal enclosure, Make : L&T/ Schneider/Legrand

S&F ON LOAD change over switch 4 pole 200amps with sheet metal enclosure, Make : L&T/ Schneider/Legrand

S&F ON LOAD change over switch 4 pole 160amps with sheet metal enclosure, Make : L&T/ /Schneider/Legrand

S&F ON LOAD change over switch 4 pole 125amps with sheet metal enclosure, Make : L&T/ Schneider/Legrand

S&F ON LOAD change over switch 4 pole 63 amps with sheet metal enclosure, Make : L&T/ Schneider/Legrand

Taking down change over switch any type & any size

M&L for Preparation for surface of existing PCC poles including cross arms, nuts, bolts, for painting LT pole 7.5 mtr long above ground level and applying one coat of approved quality Exterior grade apex paint all as directed by Engr-in-Charge.

S&F LED street light lumanaries of size 100 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection Make: Havells Cat pt JETAIRISFLS 100WLED757APNBLT G equivelent of Philips or Bajaj

S&F LED street light lumanaries of size 120 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection Make: Havells Cat pt JETAIRISFLS 120WLED757APNBLT G equivelent of Philips or Bajaj

S&F LED street light lumanaries of size 150 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection Make:Havells Cat pt JETAIRISFLS 150WLED757PSYMLT G equivelent of Philips or Bajaj

S&F LED flood light lumanaries of size 160 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection Make: Havells Cat Pt JETAIRISFLS 160WLED757PWBLT G equivelent of Philips or Bajaj.

S&F LED flood light lumanaries of size 180 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection Make: Havells Cat Pt JETA VALOURFL180WLED757PINTNBLT G

S&F LED flood light lumanaries of size 200 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection Make: Havells Cat Pt JETA VALOURFL200WLED757PINTWBLT Gequivelent of Philips or Bajaj.

Schedule of credit amount of Rs. 92,729.00 to be deducted during AOC

shri krishna traders

Goodluck Enterprises

R K TRANSFORMER

RAINA SALES AND SERVICES