GEMC-511687798220275
Awarded to F M A ENTERPRISES
₹10.8 L
Products
| Product | Brand / Model | HSN | Quantity | Unit Price | Amount |
|---|---|---|---|---|---|
| Hands file for Second cut flat | - | 8203 | 7 NOS | 540 | 3,780 |
| Car Jet washer with standard accessories | - | 8479 | 1 NOS | 32,500 | 32,500 |
| Chain Pulley Block capacity with tripod stand 3 ton | - | 7315 | 1 NOS | 27,500 | 27,500 |
| Compression testing gauge suitable for diesel Engine with standard accessories | - | 9023 | 2 NOS | 3,500 | 7,000 |
| Cylinder bore gauge capacity 18 TO 35 MM | - | 9017 | 1 NOS | 9,900 | 9,900 |
| Cylinder bore gauge capacity 35 TO 60 MM | - | 9017 | 1 NOS | 9,900 | 9,900 |
| Cylinder bore gauge capacity 50 TO 150 MM | - | 9017 | 1 NOS | 9,950 | 9,950 |
| Cylinder liner- Dry AND wet liner, press fit AND slidefit liner | - | 8409 | 1 NOS | 14,500 | 14,500 |
| Different type of Engine Bearing model | - | 8409 | 1 SET | 10,853 | 10,853 |
| Different type of piston model | - | 8409 | 1 SET | 11,992 | 11,992 |
| Fuel feed pump for Diesel | - | 8413 | 1 NOS | 9,800 | 9,800 |
| Gloves for WeldingLeather and Asbestos | - | 6116 | 5 SET | 475 | 2,375 |
| Injector cleaning unit | - | 3409 | 1 NOS | 1,500 | 1,500 |
| Injector testing set Hand tester | - | 9031 | 1 NOS | 8,800 | 8,800 |
| Oil pump for dismantling and assembling. | - | 8413 | 2 NOS | 13,800 | 27,600 |
| Oil Stone 15 cm x 5 cm x 2.5 cm | - | 6815 | 1 NOS | 380 | 380 |
| Oscilloscope 20MHz | - | 9030 | 2 NOS | 49,900 | 99,800 |
| Tinnmans Shear450 mm x 600mm | - | 8462 | 2 NOS | 475 | 950 |
| Sheet Metal Gauge | - | 9013 | 2 NOS | 425 | 850 |
| TinnmansShear 300mm | - | 8201 | 4 NOS | 390 | 1,560 |
| Soldering Copper Hatchet type 500gms | - | 8311 | 2 NOS | 1,250 | 2,500 |
| Spanner Clyburn 15 cm | - | 8204 | 1 NOS | 325 | 325 |
| Spanner D.E. set of 12 pieces 6mm to 32mm | - | 8204 | 4 NOS | 1,285 | 5,140 |
| Spanner T. flocks for screwing up and up- screwing inaccessible | - | 8204 | 2 NOS | 992 | 1,984 |
| Spanner adjustable 15 cm | - | 8204 | 2 NOS | 325 | 650 |
| Spanner, ring set of 12 metric sizes 6 to 32 mm | - | 8204 | 4 NOS | 2,750 | 11,000 |
| Spanners socket with speed handle, T-bar, ratchet and universal | - | 8204 | 2 NOS | 6,800 | 13,600 |
| Spark lighter | - | 8468 | 2 NOS | 90 | 180 |
| Spark plug spanner 14mm x 18mm x Size | - | 8511 | 2 NOS | 90 | 180 |
| Starter motor axial type, pre-engagement type AND Co-axial type | - | 8511 | 1 NOS | 23,500 | 23,500 |
| Steel measuring tape in a case 10 meter | - | 9017 | 4 NOS | 550 | 2,200 |
| Steel rule 15 cm inch and metric | - | 7323 | 4 NOS | 35 | 140 |
| Steel rule 30 cm inch and metric | - | 7323 | 4 NOS | 98 | 392 |
| Straight edge gauge 2 ft. | - | 9017 | 2 NOS | 5,300 | 10,600 |
| Straight edge gauge 4 ft. | - | 9017 | 2 NOS | 9,900 | 19,800 |
| Stud extractor set of 3 | - | 8207 | 2 NOS | 950 | 1,900 |
| Stud remover with socket handle | - | 8207 | 1 NOS | 1,950 | 1,950 |
| Surface gauge with dial test indicator plunger type 0.01 mm | - | 9031 | 4 NOS | 7,500 | 30,000 |
| Tachometer Counting type | - | 9029 | 1 NOS | 17,500 | 17,500 |
| Tandem master cylinder with booster | - | 8708 | 4 NOS | 19,500 | 78,000 |
| Taps and Dies complete sets 5 types | - | 8207 | 1 NOS | 5,300 | 5,300 |
| Taps and wrenches - Metric | - | 8205 | 2 NOS | 15,500 | 31,000 |
| Telescope gauge | - | 9017 | 4 NOS | 7,800 | 31,200 |
| Temperature gauge with sensor 0-100 0C | - | 9026 | 2 NOS | 5,900 | 11,800 |
| Thermostat | - | 9032 | 2 NOS | 1,950 | 3,900 |
| Thread pitch gauge Metric | - | 9017 | 2 NOS | 750 | 1,500 |
| Timing lighter | - | 9405 | 1 NOS | 3,900 | 3,900 |
| Torque wrenches 5-35 Nm, 12-68 Nm AND 50-225 Nm | - | 8204 | 1 NOS | 30,600 | 30,600 |
| Trammel 30 cm | - | 7326 | 2 NOS | 5,900 | 11,800 |
| Turbocharger cut sectional view | - | 8414 | 1 NOS | 24,500 | 24,500 |
| Tyre pressure gauge with holding nipple | - | 9032 | 2 NOS | 475 | 950 |
| Universal puller for removing pulleys, bearings | - | 8207 | 1 NOS | 1,950 | 1,950 |
| Vacuum gauge 0 to 760 mm of Hg. | - | 9026 | 2 NOS | 2,750 | 5,500 |
| Valve Lifter | - | 8409 | 1 NOS | 4,500 | 4,500 |
| Valve spring compressor universal | - | 7320 | 1 NOS | 1,450 | 1,450 |
| Vice grip pliers | - | 8203 | 2 NOS | 690 | 1,380 |
| Water pump for dismantling and assembling | - | 8413 | 4 NOS | 2,750 | 11,000 |
| Arbor press hand operated 2 ton capacity | - | 8462 | 1 NOS | 19,765 | 19,765 |
| Rule Steel 300 mm both in inch and mm | - | 7323 | 25 NOS | 98 | 2,450 |
| Hacksaw Frame adjustable 250 to 300 mm | - | 8202 | 25 NOS | 225 | 5,625 |
| Scriber 200 mm | - | 8207 | 25 NOS | 55 | 1,375 |
| Centre punch 100 mm | - | 8207 | 25 NOS | 68 | 1,700 |
| Chisel Cold, flat 20 mm | - | 8204 | 25 NOS | 198 | 4,950 |
| Hammer ball peen 800 grams | - | 8204 | 25 NOS | 645 | 16,125 |
| File flat rough 300 mm | - | 8203 | 25 NOS | 540 | 13,500 |
| Level spirit wooden 300 mm | - | 9017 | 25 NOS | 590 | 14,750 |
| Plumb bob 50 grams | - | 8207 | 25 NOS | 175 | 4,375 |
| Trowel C-125-I S 6013 | - | 8479 | 25 NOS | 275 | 6,875 |
| Stillson wrench 300 MM | - | 8204 | 25 NOS | 553 | 13,825 |
| Screw Driver 200 MM | - | 8205 | 25 NOS | 260 | 6,500 |
| Screw Driver 400 MM | - | 8205 | 25 NOS | 325 | 8,125 |
| Cutting pliers 200mm I S 3650 | - | 8203 | 25 NOS | 395 | 9,875 |
| Steel tape 5m | - | 9017 | 25 NOS | 153 | 3,825 |
| Hand Vice, Jaw 50 mm | - | 8205 | 2 NOS | 475 | 950 |
| File Flat, Smooth 200 mm | - | 8203 | 2 NOS | 555 | 1,110 |
| File Half Round, BASTARD 250 MM | - | 8203 | 2 NOS | 1,080 | 2,160 |
| File, Square, BASTARD 300 mm | - | 8203 | 2 NOS | 865 | 1,730 |
| File, Square, Smooth 200 mm | - | 8203 | 2 NOS | 600 | 1,200 |
| File Triangular BASTARD 300 MM | - | 8203 | 2 NOS | 513 | 1,026 |
| File Flat Rasp 250 mm | - | 8203 | 2 NOS | 833 | 1,666 |
| File Triangular Smooth 200 mm | - | 8203 | 2 NOS | 775 | 1,550 |
| Chisel Cold Flat 32 mmX300mm | - | 8207 | 2 NOS | 530 | 1,060 |
| Chisel Cross Cut 6X150 mm I S-402 | - | 8207 | 2 NOS | 225 | 450 |
| Chisel Round Nose 3X150 mm I S -402 | - | 8207 | 2 NOS | 225 | 450 |
| Chisel Diamond Point 6X150mm | - | 8207 | 2 NOS | 225 | 450 |
| Punch, Letter set 6MM | - | 8207 | 1 NOS | 1,950 | 1,950 |
| Punch , Number set 6MM | - | 8207 | 1 NOS | 735 | 735 |
| Spanner monkey up to 50mm | - | 8204 | 2 NOS | 1,090 | 2,180 |
| Cutter, Pipe, wheel type 6mm to 25mm | - | 8207 | 1 NOS | 1,450 | 1,450 |
| Oil stone 150X50X25mm | - | 6815 | 2 NOS | 380 | 760 |
| Soldering Iron, Copper, Bit, Fire heated, Hatched, Straight -500 grams | - | 8515 | 4 NOS | 1,450 | 5,800 |
| Try square 200mm | - | 8206 | 2 NOS | 635 | 1,270 |
| Inside Caliper | - | 9017 | 2 NOS | 98 | 196 |
| Caliper outside 150mm | - | 9017 | 2 NOS | 98 | 196 |
| Odd leg caliper 200mm | - | 9017 | 2 NOS | 110 | 220 |
| D. E. Spanners 6X7, 8X9, 10X11, 12X13, 16X17, 18X19, 20X22, 24X27. | - | 8204 | 2 NOS | 675 | 1,350 |
| Bending Spring | - | 7320 | 1 NOS | 850 | 850 |
| Tool caulking | - | 8205 | 2 NOS | 3,500 | 7,000 |
| Plumbers metal melting pot | - | 3197 | 1 SET | 2,750 | 2,750 |
| Pipe stock and dies complete with stocks, bushing, bushing holders, HALF TO 2INCH BSP | - | 7608 | 4 SET | 7,800 | 31,200 |
| Pipe vice to grip up to 75 mm IS - 2587 | - | 7307 | 8 NOS | 6,700 | 53,600 |
| Stillson pattern pipe wrenches 450 MM | - | 8204 | 2 SET | 1,092 | 2,184 |
| Stillson pattern pipe wrenches 300mm to take pipe 20 mm to 32mm | - | 8204 | 2 NOS | 550 | 1,100 |
| Chain pipe wrench | - | 8204 | 2 NOS | 7,800 | 15,600 |
| Adjustable, spanner, A-375, IS- 6149 -90mm -650 IS 4123 | - | 8204 | 2 NOS | 1,600 | 3,200 |
| Leg vice, 75mm jaw on Stand IS -2588 | - | 8205 | 1 NOS | 18,000 | 18,000 |
| Hand drill 6mm capacity with drill chuck Electric | - | 8467 | 1 NOS | 3,500 | 3,500 |
| Drill Twist straight shank 3mm to 6mm | - | 8207 | 1 NOS | 572 | 572 |
| Wash Basin Equivalent metric -16INCHX14INCHX10INCH | - | 6910 | 2 NOS | 3,500 | 7,000 |
| Water Heater 10 litres | - | 8516 | 1 NOS | 9,900 | 9,900 |
| Water closet European type p complete with overhead cistern | - | 6910 | 1 NOS | 9,900 | 9,900 |
| Water closet Indian type complete with overhead cistern | - | 6910 | 1 NOS | 7,500 | 7,500 |
| Water meter | - | 9028 | 2 NOS | 2,900 | 5,800 |
| Rachet pipe die 15 mm to 25 mm | - | 8207 | 1 NOS | 4,500 | 4,500 |
| Rachet pipe die 30 mm to 50 mm | - | 8207 | 1 NOS | 9,900 | 9,900 |
| Double face hammers | - | 8205 | 2 NOS | 550 | 1,100 |
| CPVC ORUPVC Pipe cutter - STD SIZE | - | 8203 | 10 NOS | 1,250 | 12,500 |
| TISHA 2000 GB SSD Hard disk drive | TISHA / seagate 2TB Surveillance Internal Hard Drive | HSN not specified by seller | 1 pieces | 9,900 | 9,900 |