SITC of electric driven Diesel Engine Driven Main Fire Pump and jockey pump along with related necessary accessories etc at CSIR Complex Pusa along with other fire fighting system components to be installed at MBSA New Delhi

Amount

Schedule: A: SITC of Electric and diesel Engine driven main fire pump alongwith jockey pump and all accessories

(a) 2850 lpm at 70 m Head

(a) 2850 lpm at 70 m Head

Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.Suitable cement concrete foundation duly plastered and with anti vibration pads. (Referred Scope of work Sub-Head: I)

(a) 180 lpm at 70 m Head

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the call/ ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

(a) 80 mm dia

(b) 150 mm dia

(c) 200 mm dia

Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required :

(a) Single headed Stainless steel

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :

(a) 80 mm dia

(b) 150 mm dia

Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required :

(a) 80 mm dia

(b) 150 mm dia

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :

(a) 80 mm dia

(b) 150 mm dia

Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.

(a) 150 mm dia

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :

(a) Stainless Steel (Grade 304)

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle.Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.

Supplying & fixing 63 mm dia stainless steel short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :

(a) Stainless Steel (Grade 304)

Supply and fixing SS Female delivery Couplings 63 mm dia for hyndrant box valve etc complete in all respect.

Providing and fixing of 25 mm dia brass ball valve ISI marked along with all accessories including dismantling of existing 25 mm valve etc. complete as required.

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :

(a) 4 way-150 mm dia M.S Pipe

Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.

Providing & fixing of pressure guaze in the range of 0-16 kgf/cm2 of suitable size in M.S. pipe line including connection with ball valve etc. as required.

Providing and fixing of Hose Box (Single Door) size : 500 x 500 x 250 mm ) 18 gauge suitable for 1 (One) number 15 meters RRL hose pipe and 1 (one) number short branch pipe with locking arrangement and glass on front with writing " Fire " etc. complete as required.

Supplying, fixing and testing of Thermoplastic hose pipe 30 meter long dia 20 mm with ISI marked IS : 12585 for existing manual swing type hose reel drum inluding dismantling of existing hose reel drum pipe etc complete in all respect.

FIRE DETECTION AND ALARM SYSTEM

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

(a) 2 x 1.5 sq. mm

Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.

Supplying, installation, testing & commissioning response indicator on surface/recess box having two LEDs metallic cover complete with all connections etc. as required.

Supplying, installation, testing & commissioning of manual call box of ABS type in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.

Supplying, installation, testing & commissioning talk back slave station in surface/recess suitable for operation on simplex mode complete with P.T.T. knob & speaker/microphone enclosed in a M.S.(16 SWG)/ ABS box with break glass in front etc. complete as required.

Supplying, installation, testing & commissioning of following Zone Microprocessor Based Main Fire Alarm Control Panel, wall mounted type fabricated out of 1.2/1.6 mm CRCA sheet, dust & vermin proof, powder coated, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections,interconnections as required.

(a) 6 Zone

(b) 10 Zone

Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required.

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required.

Supplying of followinf size Aluminium Armoured XLPE/PVC insulated and PVC sheathed cable of 1.1 KV grade

(a) 3 core x 16 sqmm cable

(b) 3 core x 70 sqmm cable

Supply of following PVC Insulated Aluminium Conductor Armoured (AYWY/AYFY) Cables as per IS 7098(Part - I)

(a) 3.5 x 185 sq.mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3.5x185 sq.mm size in the existing masonry open duct as required.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power of 1.1 KV garde of ofllowing size on wall surface as required.

(a) Upto 35 sq. mm (clamped with 1mm thick saddle)

(b) Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

(a) 3 X 16 sq. mm (25mm)

(b) 3 X 70 sq. mm (35mm)

(c) 3.5 x 185 sq.mm (57 mm)

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying & laying of foloowing size PVC insulated and FR PVC Round Sheathed, Copper Conductor(flexible) industrial cable, 1100 volt, conforming to IS 694 complete as required.

(a) 10 core x 1.50 sqmm cable

(b) 16 core x 1.50 sqmm cable

Schedule: B: : Buy back items (Scope of work Sub-Head: II)

Salavage value of dismantled smoke detector installed at CSIR complex PUSA, New Delhi including dismatling, shifting etc, "as is where is basis."

Salavage value of dismantled response indicator installed at CSIR complex PUSA, New Delhi including dismatling, shifting etc, "as is where is basis."

Salavage value of dismantled talk back slave with PA system installed at CSIR complex PUSA, New Delhi including dismatling, shifting etc, "as is where is basis."

Salvage value of existing old 75 HP (56 KW) Fire Engine Main Pump (Diesel Driven Pump) installed at CSIR Complex Pusa, New Delhi including dismantling, shifting etc, "As is where is basis".

Salvage value of existing old 75 HP (56 KW) Fire Electric Main Pump (Electric Driven Pump) installed at CSIR Complex Pusa, New Delhi including dismantling, shifting etc, "As is where is basis".

Salvage value of existing old 15 hp Fire Engine Main Pump (Jockey Pump) installed at CSIR Complex Pusa, New Delhi including dismantling, shifting etc, "As is where is basis".

Salvage value of existing old Pressure switch including dismantling, shifting etc, "As is where is basis".

Salvage value of existing 150 mm double flanged sluice valve including dismantling, shifting etc, "As is where is basis".

Salvage value of existing old 100 mm non-return valve including dismantling, shifting etc, "As is where is basis".

Salvage value of existing old 50 mm non-return valve including dismantling, shifting etc, "As is where is basis".

Salvage value of existing old 150 mm non-return valve including dismantling, shifting etc, "As is where is basis".

Salvage value of existing old 50 mm double flanged sluice valve including dismantling, shifting etc, "As is where is basis".

Salvage value of existing old 100 mm double flanged sluice valve including dismantling, shifting etc, "As is where is basis".

Salvage value of existing 50 mm y strainer including dismantling, shifting etc, "As is where is basis".

Salvage value of existing 150 mm y strainer including dismantling, shifting etc, "As is where is basis".

Salvage value of existing old 4 way-150 mm dia MS Pipe Fire brigade connection including dismantling , shifting etc, "As is where is basis".

Salvage value of existing old 6/8 zone panel including dismantling, shifting etc, "As is where is basis".

Salvage value of existing old 25 mm dia gunmetal valve including dismatling, shifting etc 'As is where is basis'

Salvage value of existing old Hose reel/ drum including dismantling, shifting etc, "As is where is basis".

U K ENTERPRISES

DIGITEK FIRE SAFETY PVT LTD