Repair and Renovation of proposed Sub-Register Office at Khaprakhol Tahasil for the Year-2025-26

Cement concrete in cm (1:3:6) using 4cm size H.G. metal with all cost conveyancy Royality etc. complete and as per the direction of Engg-in-Charge.

Supplying fixing and fitting of A.C. Sheet in roof, including fixing of ridges in wind ties etc. complete but excluding cost of fitting including drilling holes in wind ties etc complete and as per the direction of Engg-in-Charge.

Iron work wrought and put up in trussed in shedand with all cost of material and taxes etc complete and as per the direction of Engg-in-Charge.

Brick work with K.B. bricks 23cm x 11cm x 8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in foundation and plinth per cum including cost of material with all cost ,conveyance including scaffolding tax,T&P,labour etc complete as per the direction of the Engineer - in -charge.

12mm thick cement plaster (1:6) on brick work per 1 Sqm with all cost ,conveyance including scaffolding tax,T&P,labour etc complete and as per the direction of the Engineer - in -charge.

Finishing wall surface of walls with aerylic wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of sceffolding staging charges with cost of all materials taxes labour T & P etc complete and as per the direction of the Engineer - in -charge.

Supplying fitting fixing of 32mm thick flush door with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc complete as per specification and direction of Engineer in Charge.

Supplying fitting fixing of upenable UPVC doors with door fram of approved make with 6mm thick glass approved quality complete with frame shutters and all fittingand fixtures etc complete as per specification and direction of Engineer in Charge.

Providing wall panneling with century /sylvan 19mm /12mm ply IS303(BWR) and 4mm thick century veener Tino,century veener American maple including melamine polishing and cost covency royalty and taxes of all materials ,hair charges and cost of all labour T&P requred for the work complete in all respect as per the direction of Engineer in Charge.

Supplying, fitting, fixing up conference Table made up 19mm BWR Ply & covered with 1mm thick Laminate including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in-Charge.

Providing fitting fixing of aluminium anodised T sections no 3215 with 2" center to center ,L section no 175 up to 15 micron on 4 wall to be fixed by means of steel screw and PVC plug and the aluminium grid 2' 0"x 2' 0" suspended from ceiling etc.complete as per specification and direction of Engineer in Charge.

Supplying ,fitting & Fixing Vetrifed tile in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete with all cost ,conveyance including scaffolding tax,T&P,labour etc complete as per the direction of the Engineer - in -charge.

Supplying ,fitting & Fixing Vetrifed tile in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete with all cost ,conveyance including scaffolding tax,T&P,labour etc complete as per the direction of the Engineer - in -charge.

Wall Painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint etc complete as per specification and direction of Engiineer in Charge.

Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire = Finollex / L & T/ Anchor/ Havels/ V-Guard/ Greatwhite / Polycab) Group A (1.1.1)

-do- .... Group B (1.1.2)

-do- .... Group C (1.1.3)

S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 4 Modular box with base & cover (1.24.3)

8 Modular box with base & cover (1.24.5)

S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board (1.25.1+1.25.4)

S/F of 6 Modular GI box in recess with suitable size of Modular base cover in front including providing and fixing 2 nos 3 pin 5/6 amp. Modular Socket out let & 5/6amp. Modular type switch,connection,painting etc. as required.(2X1.25.1+2X1.25.4)+6 MODULE

S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required (1.25.3+1.25.5)+4 MODULE BOX

S/F of computer board (Modular Type) consisting of 3 nos. of 5 amp plug and switch and 6 amp MCB, Indicator complete with wiring on 12 module M.S.box with B.k.cover(1.24.6 + 3 x (1.25.1+ 1.25.4) + 2.6.1)+Indicator

Wiring for circuit I sub main wiring alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS- 694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required ( Make of wire- Finolex/ / Anchor/ Havels/ V-guard / HPL / L&T / Gratewhite / Polycab). -do- 2x1.5sqmm +1x1.5sqmm ( 1.8.1 )

-do-2x2.5sqmm +1x1.5sqmm ( 1.8.2 )

-do- 2x4sqmm +1x1.5sqmm ( 1.8.3 )

Supply, Installation testing and commissioning of 63 Amp. ICDP Main Switches (IS13940 part 3/1993) with supply of metal box of following capacity on existing surface/Wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make: HPL / L&T / C&S / Havells / Seimens / RK / Anchor / Havells) (2.15.a)

250mmx300mmx100mm deep(1.24.13) for fixing 63Amp ICDP Main switch.

S/Fof 'B' series SP MCB of 5A to 32 Amp rating 240Volt "B" series MCB for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP)(2.6.1)

S/F of following 12way Double Door and neutral sheet steel MCB DISTRIBUTION BOARD 250v on surface /recess complete with tinned copper bus bar, neutral bar, earth bar, din bar ,detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (except MCB) 2.3.7

S/F of batten holder BK angle holder ISI marked including connection etc instead of ceiling rose (Make: Cona / Anchor / Havells / Greatwhite / Preeti / HPL) (1.29-1.28)

Earthing with G.I. earth pipe 3 metre long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arragement and watering pipe etc. with charcoal and salt as required.(3.2)

Supply and laying 6 SWG G.I wire in recess for loop earthing as required ( 3.17)

S/F of 1200mm A.C. Ceiling fan (1Star) with all accessories and connections with out fan regulator (Make:Usha-Striker One/Neo/Crompton- highspeed/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White-ALDOUS/Pollycab-Vital HS)

S/F of electric step ceiling fan regulater in existing switch box including connection with 1.5sqmm FR PVC insulated single core multistrand copper conductor earthing the regulator as required.(1.38)

S/F of Fan hok S'type made of 16mm MS rod as per specificationn

S/F of 18-25 watt LED Tube light fitting compoete with all connection. including fixing and all accessories as per direction of Engineer-In-charge (Make: Havels / Phillps / Crompton / Polycab / HPL)

Supply & fixing of 9W LED Ceiling Light (S)(Make- Havells/panasonic Bajaj/philips/Wipro) all accessories.

Supply of instalation, Testing commissioning of 12 Watt. LED bulb

S/F of 15A modular socket on 2 Modular Metal box for A.C

S/F of 32A C series D.P. MCB for A.C (make: Legrand/Anchor/Havels/HPL)

S/F of 25A Moter Starter switch for A.C (Make: Havells / Anchor/Le-Grand)

S/F of 1.5 Ton 3 star Inverter type split A.C. M/C with 4 KVA Voltage Stabilizer(110V-300V) (Make - Microtek, V-Guard) and AC stand with all accessories and connections and installation (Make - HITACHI/ Bluestar/ Carrier)

S/F of 900 VA Inverter with 1 no. 180 Ah Tubular battery including trally arrangement (Make: Microtake/ Luminous/Exide)

wiring to sub main with 1*1.5 mm2 single core multi strand copper wire for inverter wiring (1x1.5mm)