ADDN/ALT IN BLDG NO T 26 AND T 28/5 AT SSI AND PROVN OF DEFI CEILING AND EXHAUST FAN IN CERTAIN OFFRS/JCOs/OR MD ACCN AT LBS MARG AND BHAGAT LINE AND PROVN OF MS LADDERS AT MGSF COLONY UNDER GE WEST LUCKNOW

Amount

Demolition of brick work or stone/ boulder masonary, built in cement mortar or cement lime mortar including all quions, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles etc. complete all as specified and directed.

M&L for brick work with fly ash bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi corrugated etc) sheets and ridges in roof coverings complete all as specified and directed.

Dismantling ( framed) timber scantlings 40 sq. cm and over in section and in any position complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area n. exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exc 1.50 Sqm but n. exc 4sqm each complete all as specified and directed.

S & F in repairs second class hardwood timber clean sawn scantlings 40 sq. cm and over in section, in any position including piecing, scarfing, etc., of old and new timbers if required) and removing defective portion complete all as specified.

Dismantling framed trusses mild steel not exc. 10 mtr span for repairs and welding and refabrication with rolled mild steel section in Roof trusses (framed) trussed purlins, crane gantries, rails and fastening and heavy bracket framing ( Beam tee, angle channel or flat sections) etc quality conforming to Fe 290 (Gde-E-165) and refixing in same location complete all as specified and directed. Note :- (i) New MS sections used shall only be measured and paid. (ii) Height of bldg is above 9.00 M and proper security of workmen shall be ensured and nothing extra shall be paid on this account.

M & L rolled sections as in main and cross beams, posts, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates Fe 410-W(Gde- E- 250) quality-A complete all as specified and directed.

S & F for 0.50 mm thick pre-painted galvalume aluminium zinc coating galvanised iron based corrugated steel sheet with side lap and end lap of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F 0.63mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed.

Taking down cement plaster or cement lime plastering , any description from brick wall including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Material and Labour for rendering 15 mm thick cement plaster in CM 1:4 with water proofing compund (@ 3% by weight of cement) on fair faces of brick work or concrete surface and finishing the surface even and smooth without using extra cement all as specified and directed. (Note:- Water proofing compound shall be measured and paid seprately.)

M & L 15 mm thick rendering in CM (1:6 ) on other than fair faces of brick wall or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound conforming to IS 2645 complete all as specified and directed.

Taking down eaves Gutters rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including PVC holding clamps, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

Material & Labour for preparation of new plastered/unplastered surfaces of finished walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. Note- Primer and emulsion to be carried out through air less spray machine ( Mechanical means)

Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed.

Material & Labour for preparation of old plastered/unplastered surfaces of finished walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. Note- Primer and emulsion to be carried out through air less spray machine ( Mechanical means)

M & L for preparation of new plastered surface of wall and applying two coat of oil bound distemper of approved shade/tint over a coat of primer and putty with roller complete all as specified and directed.

M & L for preparation of old plastered surface of wall and applying one coat of oil bound distemper of approved shade/tint with roller complete all as specified and directed.

M & L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

M&L Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in roof kerbs, benching, copings, padding, kneelers, bed blocks, hold fast and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.

Supply and fixing in repair 10mm thick plaster of paris ceiling (Gypsum anhydrous) to curved surface for any sunk or raised moulding including all necessary GI frame wall and channel 0.55 mm thick complete with necessary hangers up to 4 mm dia wire as over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh all as per manufaturer's instructions complete all as specified and directed.

S & F in repairs 'E' board 600x600x4mm thick white prelaminated sett embossed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24 x 32 x 300mm and spaced at 1200mm centers securely fixed to the structural soffts by approved hangers at 1200mm, maximum centrers.Hangers of GI wire 4 mm dia to be fixed by approved rawl plug, level and jumper and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall, Flush fitting of 1200mm long cross tee (with double stiching) to be interlocked between main runners at 600mm centre to from 1200 x 600 mm modules cross tee longer than 600mm to be supported independently. 600x600mm dodules to be formed by fitting 600mm long cross tee centrally between the 1200mm cross Tee, perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacturer's instructions complete all as specified.and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finish polishing complete including 20 mm screed bed bedding layer in CM 1:6 complete all as specified and directed.

M & L for rubbing, griding including mirror polishing of existing kota stone/marble floor surface complete all as specified and directed,

Supply and Fixing powder coated (thickness of powder coating shall not be less than 50 micron) aluminium three track sliding type glazed window shutter with 5mm thick plain sheet glass fixed open track section 100x38x1.25mm having three track (two of glass & one of stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aparture 1.40mm) with members of window shutters of section 38x12x1.5mm and other standard Bombay sliding section including all necessary fiber wheel rollers suitable handle to facilitate sliding and all necessary jointing cleats glazing clips,rubber packing, Aluminium snap beeding etc all as specified and directed.

Supply and fixing in repair anodised aluminium glazed side hung door shutter with frame using section 100 x 44mm x 1.5 mm thick with standard door section having style, top rail, lock rail as 83 x 44 x 1.5mm where as bottom rail will be made up of 100 x 44 x 1.5mm including 5mm thick plain sheet glass ordinary quality including all necessary suitable handle, hinges, screw, jointing cleats, rubber packing, Aluminium snap beading and one No 200mm long Aluminium tower bolt, 100 mm long 3 Nos Aluminium hinges B-21 type and one No Mortice lock 100mm size 4 lever (vertical type) and hydraulic door closure for each shutter complete all as specified and directed.

S&F in repair Framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S& F in repair 18/19mm thick ply wood, grade BWR, type BB quality, fixed with screws/nails to timber frame-work, edge chamfered complete all as specified and directed.

S & F 0.9 mm thick decorative laminates type 1 of surface finish, colour and pattern as approved fixed with synthetic Glue / Adhesive to timber frame/wood work as per manufacturer's instructions, edge chamfered as directed complete all as specified and directed.

S&F continuous (Piano)) hinges mild steel bright finished or electo galvanised, with width of flap 30 mm when open,and fixed with screws complete all as specified and directed.

S&F 100 mm long aluminium anodised, haps and staple, safety type with steel hinges pin including bolts to hinge plate and fixed with srews complete all as specified and directed.

S&F Ball catches (magnet catcher) with 8mm dia steel ball, brass body and striking plate including letting in, overall size 50x15mm and fixed to shutter complete all as specified and directed.

Supply and fixing 100mm size aluminium handle, fabricated type anodised, ISI marked complete all as specified and directed.

Taking down anodised aluminium doors,window & ventilators shutters, side hung or fixed type exc 1.5 sqm and n. exc 4 sqm and refixing in same opening after repairing including necessary jointing cleats, glazing clips, rubber packing, screws etc and with existing anodised aluminium snap beading, screws anodised aluminium fittings such as hinges type B-21, 125mm long anodised section complete including 5 mm thick glass and floor door spring hydaulically regulated complete all as specified and directed.

Supply and fixing in repair Aluminium (Die cast) body Door closer hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed

Taking down and refixing of old existing looking mirrors with spacers including making holes complete incl all necessary screws,adhesive and fittings all as specified and directed

S&F 5mm thick looking mirrors fixed with spacers on walls including making holes complete and all necessary screws,adhesive and fittings all as specified and directed

M&L Pressed steel door frame of size 105 x 60 mm with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete as specified and directed. Note :- The hollow portion of frame shall be filled with PCC 1:3:6 type C-0 (using 12.5mm graded stone aggregates) and compacted properly before fixing the frame to opening, quoted rates shall deemed to include cost of same and nothing extra shall be paid for the same

Supply and fixing for 30mm thick factory made flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and fixing aluminium anodized barrel tower bolts 200 mm of extruded section all as specified and directed.

Supply and fixing 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified and directed.

Material and Labour for preparation of new untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified.

Material and Labour for preparation of old treated surface of wood or wood based materials of any description over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified.

Material and Labour for preparation of new untreated surface of steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and Labour for preparation of old treated surface of steel surface of any description over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

S&F anchor fastners bolt type of 12 mm dia for fixing as in MS ladders complete all as specified and directed.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed. NOTE: Credit for this items shall be made as per conditions separately.

M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.

All as per item no 53 above but for one 5 pin 5 Amp socket outlet point on an independent board.

All as per item no 53 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch.

All as per item no 53 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm and green colour earth cable of size 2.50sqmm.

S&F Switch piano, flush type, single pole, one way 5/6 Amp 230 Volts complete all as specified and directed.

S&F Switch piano, flush type, single pole, one way 15/16 Amp 230 Volts complete all as specified and directed.

S&F socket outlet, flush type, single pole, multipurpose 2 in 1, 5 pin 5/6 Amp, 230 volts complete all as specified and directed.

S&F socket outlet, flush type, single pole, multipurpose 2 in 1, 5 pin 15/16 Amp, 230 volts complete all as specified and directed.

S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50mm dia complete all as specified and directed.

S&F in repair ceiling fan regulator, electronic, rotary step up socket type, 230 volts suitable for 1200/1400 mm sweep ceiling fan including necessary connection complete all as specified and directed.

S&F in repairs double door VTPN 4 way double door suitable for 4 pole MCCB , 415 V as incoming & SP/TP MCB as outgoing 200 Amps rated Busbar, inter connection link, cable ties, earth bar etc incl necessary civil works and electrical connections with suitable lugs/spreader links complete all as specified and directed . ( Note: MCCB & MCB to be measured and paid separately)

S&F MCCB 160 Amps 415 volts, 4 pole 16 KA breaking capacity complete all as specified and directed.

S&F in repair sheet metal enclosure for MCB DB double door type, single pole and neutral 12 way, 240Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F MCB, single pole 6 to 32 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F MCB, single pole & neutral 40 to 63 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

Supply & fix modular type AC power unit with a two pin and earth plug and socket complete with one single pole MCB 20 A complete all as specified & directed.

M&L for two single core PVC insulated FRLS cable 4.0 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through non metallic rigid PVC conduit 20mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete including taking down old sub main wiring. (Note-The cost of PVC pipe and accessories shall be deemed to be included in the quoted rate)

M&L for two single core PVC insulated FRLS cable 6.0 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 6.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through non metallic rigid PVC conduit 20mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete including taking down old sub main wiring. (Note-The cost of PVC pipe and accessories shall be deemed to be included in the quoted rate)

Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20 W, 6000 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as specified and directed by Engr-in-charge. Make Phillips Smart brite cat no BN 021 LED 22S 6500 PSU GR/SI or/Havells Endura linear neo cat no enduralinear neo BS22WLED865SPCWH/ Bajaj LED batten BCLAB 20W WH LED P

S&F super bright LED (2X2), 36 W, 6000 K recess mounting with high efficent LED source all as per specified and directed.Make Philips cat part no.: RC380B LED30S -6500 G4 L60 W60 PSU OD OC/Havells Pluto Neo Panel cat no PLUTONEO2X2PLR34WLED857S/ Bajaj SKYLUX GZI SERIES -RECESSED cat no BZRSQL 36W GZi WH

Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge.Make:Phillips smart brite cat no BN 021 LED 12S 6500/4000 PSU GR/SI or/Havells Endura linear neo cat no enduralinear neo BS10WLED865SPCWH/ HPL Neptune plus 10 w HLPT51510CW

S&F LED Building security light 24/25 Watt with high power LED source (>110lumen/watt) PDC housing, IP65 and IK 07 with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 0.60 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts. Make philips Green line smart cat noBRP042 LED 25 CW R1 S1 PSU GR/ Bajaj Edge nxt LED cat no ENXT P 24L WH CR PC SD/ Havells

Taking down carefully light fitting of any pattern from any position by disconnecting all connection and refixing serviceable light fittings in its original or new location complete all as specified and directed.

Supply and fix wall mounting fans 400 mm (white) string controlled oscillating type including provn of flexible three core cable from ceiling rose to terminal for making connection, fitting on wall including all necessary fixing accessories complete all as specified and as directed . Make Havells /Anchor/Bajaj

S&F ceiling fan 1400mm sweep, Min air delivery 215 CFM, copper wound, AC single phase, 230/240 volts white colour complete with fan motor, blade, down rod, canopy and provn of connection with three core flexible copper wire cable of size 1.50sqmm from ceiling rose to fan complete all as specified and directed. Make: Havells SS 390/Bajaj New Bahar/Anchor Cool King

S & F in replacement of exhaust fan made of sturdy engineering plastic body complete with louvers shutter, single phase, 230/240 Volt of size 250 mm sweep 1200 RPM and making connection with PVC insulated and sheathed three core copper flexible cable 23/0.076mm after cutting opening in 230/460mm thick brick wall built in cement mortar and making good the surface with cement mortar 1 :3 including necessary frame etc all as specified and directed by Engr-in-charge. Make Havells /Anchor/Bajaj

M&L Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m deep below normal ground level, connected to galvanised earth lead wire 4.0mm dia (7.50m) by means of bolts, nuts, check nuts & washers of galvanised iron or steel, earth lead wire protected by 15mm dia GI pipe light grade, 20mm dia light grade GI pipe for watering, meshed funnel, alternate layer of charcoal and common salt complete all as SSR Item No. 19471 and shown in electrical plate No. 3 of SSR part-I with PCC chamber, 50mm thick RCC cover in 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8mm dia TMT bar @ 80mm c/c both way in lieu of CI pit cover and protection including necessary excavation and earth work complete all as specified and directed.

m/s durgesh traders & constractions

M/S S&R Construction

M/S S S A ASSOCIATES

M/S Reliance Construction

m/s raghubar dayal