Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.1 LAccepted-AOC | L1 | Accepted-AOC Being lowest and reasonable | |
| 2 | L2₹48.6 L+₹4.5 L (10.2%)Rejected-Finance 606 80 FEET ROAD 7TH BLOCK 2ND PHASE BANASHANKARI 3RD STAGE BANGALORE 560 085 | BANGALORE | BANGALORE | KARNATAKA | 560085 | L2 | Rejected-Finance NOT BEING LOWEST | |
| 3 | L3₹49.7 L+₹5.6 L (12.6%)Rejected-Finance | L3 | Rejected-Finance NOT BEING LOWEST |
Tender Value
₹45.8 L
EMD Value
₹91,500
Closing Date
13 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER I R nd D WEST BANGALORE
GARRISON ENGINEER I R nd D WEST BANGALORE, DRDO TOWNSHIP, CV RAMAN NAGAR, BANGALORE-93
PROVISION OF CERTAIN REVENUE AND SANCTIONED WORKS AT LRDE BENGALURU
2024_MES_641081_1
GE(I)/R ND D/BAN/TOKEN/100 OF 2023-24 8255/E8
Open Tender
Civil Works
Item Rate
180 days
GARRISON ENGINEER I R nd D WEST BANGALORE
CLASS AND CATEGORY AS PER NIT
9 documents required · 9 mandatory
₹500
GARRISON ENGINEER I R nd D WEST BANGALORE
₹91,500
30 Mar 2024
13 Feb 2024
19 Mar 2024
14 Feb 2024
13 Mar 2024
29 Feb 2024
14 Feb 2024 - 28 Feb 2024
Amount
Providing and laying factory made Precast concrete solid blocks of 200 mm thickness of grade M10 made of C&D waste from approved manufacturer in foundation and plinth in cement mortar 1:6 complete all as specified and as directed.
M&L for Rendering 15mm thick on surface other than fair face of brickwork/ concrete surfaces in CM (1:4) finished fair and even complete all as specified and directed.
Providing and fixing at or near ground level, Reinforced precast cement concrete 1:1.5:3 nominal mix , type A1 (using 20mm graded stone aggregate) in kerbs, edgings, drain covers etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete all as specified and directed.
Providing and laying cement concrete in 1:1.5:3 nominal mix , type A1 (using 20mm graded stone aggregate) in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing complete all as specified and directed.
M & L for Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level using Thermo-Mechanically Treated bars of grade Fe-500D or more all as specified and as directed.
Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m in all kinds of soil complete all as specified and directed.
Providing and laying in position cement concrete 1:1.5:3 nominal mix , type A1 (using 20mm graded stone aggregate) including necessary formwork for all works up to plinth level complete all as specified and directed.
Providing corrugated Galvanised steel sheet 0.63 mm thick with zinc coating not less than 275 gm/ sqm in roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape as required complete all as specified and directed.
Providing ridges or hips of width 60 cm overall width plain Galvanised steel sheet 0.63 mm thick with zinc coating not less than 275 gm/ sqm fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete all as specified and directed.
Supply and fix mild steel work as in framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., using hot finished seamless type tubes including cutting, hoisting, fixing in position including welding and bolted with special shaped washers etc.complete all as specified and as directed.
Preparation of new steel surfaces exceeding 10 cm in width or girth, applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.
62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
Providing and fixing powder coated aluminium work for frames of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, (minimum thickness of powder coating 50 micron) fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P.brass screws complete as specified and directed by Engineer-in-charge.
All as per item no 15 above but for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and fittings as required including the cost of EPDM rubber / neoprene gasket required complete as specified and directed by Engineer-in-charge.
Providing and fixing glazing with float glass panes of 5 mm thickness (weight not less than 10 kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. complete all as specified and as directed. (Cost of aluminium snap beading shall be paid in basic item)
Supply and fix, stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm, fixed with stainless steel wire staples complete all as specified and as directed.
Material and labour point wiring with 1.5 sqmm FRLS grade single core PVC insulated, unsheathed, 1100V grade copper multistranded conductor for the following concealed type wiring and including new PVC conduit of any size, complete with all PVC conduit and accessories/ fittings, brass screws, washers etc, along with modular suitable factory made Sunken boxes concealed including all cutting/chases as applicable etc or surface type PVC boxes factory made (where concealing boxes is not possible as per site conditions) to accomodate modular plates, covers modular switches & sockets etc in walls and including PVC insulated copper earth continuity conductor 1.5 Sqmm FRLS cable green colour connected to common earth dolly complete making good the disturbed surface of wall, floors, ceiling etc complete all as specified and directed by Engineer-in-charge for One light / fan / bell point controlled by one, one way switch 5/6 Amps complete all as specified and as directed.
M&L for circuit / submain wiring with 2 x 1.5 sqmm FRLS PVC insulated multistrandard copper conductor single core cable from MCB to switch board and 5 Amps socket wiring along with 1 x 1.5 sqmm earth wire FRLS PVC insulated multistrandard copper conducor green colour single core cable in and incluiding recessed medium class PVC conduit as required and directed by Engr-in-Charge. Note :- 2 runs of 1.5 sqmm cable, 1 run of earth wire and PVC conduit will be measured as one unit.
M&L for circuit wiring with 2 x 4 sqmm FRLS PVC insulated multistrandard copper conductor single core cable from MCB to switch board and 5 Amps socket wiring along with 1 x 4 sqmm earth wire FRLS PVC insulated multistrandard copper conducor green colour single core cable in and incluiding recessed medium class PVC conduit as required and directed by Engr-in-Charge. Note :- 2 runs of 4 sqmm cable, 1 run of earth wire and PVC conduit will be measured as one unit.
Supplying and fixing GI box of size 180mm x 100mm x 60mm deep (nominal size) in recess including providing and fixing suitable size modular plate, cover, Modular socket outlet 5 pin 5/6 A and modular switch 5/6 A , connections etc. as required and directed by Engr-in-Charge.
Supplying and fixing GI box of size 180mm x 100mm x 60mm deep(nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6-pin 15/16 A Modular socket outlet and 15/16 A modular switch, connections etc. as required and directed by Engr-in-Charge.
Supply and fix 3 pin, 5 Amps Ceiling rose surface type, Bakelite, 65 x 50 mm ISI marked with three terminals including PVC block all as specified and as directed.
Supply and fix Double Door Vertical DB Triple pole Neutral 4 Way 415 Volt MCCB as incomer, MCCB and MCB SP as out goings as per site requirements with suitable manufacturers rated Bus Bar including necessary dummy plate complete all as required and directed by Engr-in-Charge. Note - Cutting, grooving as required and making good after works to match with the adjoining surfaces is the responsibility of the bidder, the cost inclusive in the quoted rate.
Supply and fix MCCB, 4Pole, 100 Amps, 415 Volt, 50 Hz, not less than 25 KA using copper lugs for terminations complete all as directed by Engr-in-Charge..
Supply and fix, MCB DB SPN 8 way (Horizontal), double door with Sheet metal enclosure, flush mounted, prewired, 240 V, AC, 50 Hz, Factory made, powder coated, IP-42 protection conforming to IS-13032 universal mounting with 200 Amps rated copper bus bar, neutral link, earth link, earthing studs, detachable gland plates with knockouts on both sides, etc complete all as specified and as directed.
Supplying and fixing single pole and neutral 63A rating, 240 V,10KA,"C" curve miniature circuit beaker suitable for MCB DB complete with connection,testing and commssioning etc.as required
Supply and fix MCB SP 10/16/20 Amp 240 Volts 10 KA C curve using copper lugs for terminations complete all as specified and directed.
M&L Wiring for circuit/ submain wiring with 2 X 10 sq. mm FRLS PVC insulated copper multi strandard conductor, single core cable plus 1 X 10 sq. mm earth wire, green colour, FRLS PVC insulated copper multi strandard conductor, single core cable in and inculding recessed medium class PVC conduit of dia not less than 25 mm complete all as directed by Engr-in-Charge. Note: 2 runs of 10 sqmm cable, 1 run of earth wire and a run of 25mm PVC conduit pipe will be measured as one unit.
Supply, Install, Testing and Commissioning inverter type, 5 star rated, adjustable type Cassette split unit with indoor/outdoor units of capacity 2.0 TR complete with cordless remote control unit, with in built filter as per latest manufacturer's model for better indoor air quality complete all as directed. Note - 1) BEE rating of manufacturer model shall be of latest current year. 2) Copper pipings with best insulation of required sizes, drain out PVC pipe and control cable of suitable rating upto 3 metre shall be included in the quoted rate and beyond 3 metre shall be measured and paid separately.
Supply and fixing wall mounted heavy duty, factory made, powder coated steel brackets for outdoor units suitable for 2.0 Ton AC out door unit complete.
Supply, laying and testing copper piping 1/4 inch dia with suitable insulation material complete.
Supply, laying and testing copper piping 5/8 inch dia with suitable insulation material complete.
Supply, laying and testing FRLS PVC insulated copper multi strandard conductor, multi core copper cable of size 2.5 sq mm , 4 core complete.
Supply, Install, Testing and Commissioning of voltage stabilizer for automatic operation single phase naturally air cooled indoor type & designed for input variation between 170 V to 250V with output voltage stabilized at 230 V with accuracy of + 2.5% and of capacity 5 KVA
Supplying and fixing SPN Industrial type socket outlet, 20 A, 240 V, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, concealed, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required complete including taking down,all as specified .
M&L for submain wiring with 2 X 6 sq. mm FRLS PVC insulated copper multi strandard conductor, single core cable plus 1 X 6 sq. mm earth wire, green colour, FRLS PVC insulated copper multi strandard conductor, single core cable in and inculding recessed medium class PVC conduit of suitable dia complete all as directed by Engr-in-Charge. Note: 2 runs of 6 sqmm cable, 1 run of earth wire and a run of PVC conduit pipe will be measured as one unit.
Supplying, fixing and testing of 5 star ceiling fan 1200 mm sweep 340 RPM (+/- 10%) with silent BLDC motor wattage not more than 35 Watt high speed with remote control Air delivery not less than 225 CMM 240 V 50 Hz 1 ph AC white colour P F not less than 0.90 rated speed eficiencia neo, installations all as per site requirements using necessary ladders/tools complete all as directed by Engineer-in-charge. Make - Bajaj model - ENERGOS 35 or techno-commercial equivalent model in other specified makes as approved by GE.
Supplying, fixing and testing of metal industrial exhaust fan, heavy duty, double bearing of size 300 mm 220 - 240 V 50 Hz 1 ph AC 1400 rpm (+/- 10%), air delivery not less than 1900 CMM, power 90 watt with louvers complete in and including necessary ladders, tools and plants as per site requirements complete all as directed by Engineer-in-charge.. Make - Bajaj model - Supreme plus or techno-commercial equivalent model in other specified makes as approved by GE. Note - Making a hole on wall at any height shall be measured and paid separately.
Supplying, fixing and testing of PVC exhaust fan of size 250 mm 220 - 240 V 50 Hz 1 ph AC 1325 rpm, air delivery not less than 500 CMM, power 31 watt with louvers complete in and including necessary ladders, tools and plants as per site requirements complete all as directed by Engineer-in-charge. Make - Bajaj model - MAXIMA DX or techno-commercial equivalent model in other specified makes as approved by GE. Note - Making a hole on wall at any height shall be measured and paid separately.
Supplying, fixing and testing PVC exhaust fan of size 300 mm 220 - 240 V 50 Hz 1 ph AC 1325 rpm, air delivery not less than 500 CMM, power 31 watt with louvers complete in and including necessary ladders, tools and plants as per site requirements complete all as directed by Engineer-in-charge. Make - Bajaj model - MAXIMA DX or techno-commercial equivalent model in other specified makes as approved by GE. Note - Making a hole on wall at any height shall be measured and paid separately.
Material and labour for making a hole for fixing of exhaust fan of size upto 300 mm on the walls of any type using drill cutter or any method round type at any height upto 15 mtr with required T&P, Scaffolding etc as per site requirements and making good distrubed surfaces to match with the adjoining surfaces complete all as directed by Engineer-in-charge.
Supplying, fixing and testing of Pedestal fan 400 mm oscilating type 220 - 240 V 50 Hz 1 ph AC 1350 (+/- 10%) rpm, P.F 0.90 (min), not more than 60 watt, Air delivery not less than 75 CMM fixing all as per site requirements complete all as directed by Engineer-in-charge.Make - Bajaj model -Airstream or techno-commercial equivalent model in other specified makes as approved by GE.
Supplying and fixing suitable size GI box for three module with modular plate and cover in front on surface or in recess, including supply and fixig 5/6 Amps modular switch, connections etc as required complete all as directed by Engineer-in-charge. Note - Three module considered for fixing switch and regulator 3 mod type and regulator shall be measured and paid separately under relevent item.
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connection on modular plate etc as required complete all as directed by Engineer-in-charge.
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including supply and fixig 3 pin 5/6 Amps modular socket outlet and 5/6 Amps modular switch, connections etc as required complete all as directed by Engineer-in-charge.
Lucky Enterprises
TANCARE HYGIENE AND HEALTH CARE
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .