Detailed estimate for Providing high mast at ward no 07near Diggi Agasi, ward No 17, ward No 10 near Chamundieshwari temple, ward No. 22 and ward No. 23 and providing and fixing of LED street lights at ward no 20 and at ward no 30 of Shahapur city. (RESERVED FOR CAT II A)

Detailed estimate for Providing high mast at ward no 07near Diggi Agasi, ward No 17, ward No 10 near Chamundieshwari temple, ward No. 22 and ward No. 23 and providing and fixing of LED street lights at ward no 20 and at ward no 30 of Shahapur city.

Fabrication, Supplying, Erection, Testing and Commissioning of 12.0Mtrs long polygon high mast with Multiple  telescopic sections having, ( minimum overlap distance of 1.5 times of top section)  thi...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant I...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Supply of 200W LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded po...

wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper conductor single core wire in open or concealed system of wiring as per IS-694:1990 and confirming to ...

Fixing halogen/metal halide/SVL/IL/LED floodlight fitting over exising pole/wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires Quantity 3X8=24 Nos,

PWD SR vOL-6 (2...

Supplying and fixing angle iron frame work fabricated out of MS angle iron 50X50X6mm and MS flat with bolt washer etc., and painted with 2 coats of redoxide and then two coats of approved paint. PWD S...

Fabricating Supplying and mounting MS box made out 16 SWG suitable for floor/wall mounting fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped wi...

Supplying & fixing miniature circuit breaker on existing MCB distributing boards using necessary fixing materials and ‘C’ type Curve, indicator ON/OFF, energy cross-3 with short circuit breaking c...

Supplying of 1.1 KV LT UG cable having aluminum conductor PVC insulated, extruded inner sheathed, galvanized, steel strip (Except 2CX10 sqmm wire armoured) confirming to IS 3975;1990 (No of strips ind...

Supplying & fixing of class A(medium duty) GI Pipe of wall thickness not less than 3.25mm on Pole/Wall/Drain crossing with necessary clamping arrangement for UG cable of 1.1KV a)50mm, PWD SR (2019-2...

Supplying and fixing of porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 32 Amps, PWD SR VOL-6 (2023-24) Page.No.14,Item.No.5.7.2

Supplying & fixing of 4 pole power contractor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS -13947 25Am...

Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers. PWD SR (2023-24) Page.No. 21,I.No.5.48

Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards a...

Refilling the cable trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm. Thickness including depositing of the surplus earth with a lead ...

Labour charges for laying of 1.1KV class UG cable in existing trench GI pipe/stone ware pipe/on pole as required. In existing trench/duct 6 Sqmm to 16 Sqmm, PWD SR (2023-24) Page no 52 item no 21.05

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20 Amps single phase Class-1 Accuracy with Temper Proof Energy Meter. PWD SR VOL-6(2023-24) Page no 19 item no5.30)

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutout and other equipments on the meter board using 40 mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit…The pit shoul...

Supply of 70W LED streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded po...

Supply of 90W LED streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded po...

Supplying and Fixing of 25mm dia class A GI pipe bracket upto 2ms long bent at suitable angle and fixing to this bracket streetlight fitting ofall capacities to GI or rail or RCCpole/wall usingsuitabl...

Fixing halogen/ metal halide/ SVL/ IL/ LED floodlight fitting over existing pole/wall ceiling including clamps,bolts,nuts and wiring using suitable capacity wires.