CERTAIN SPECIAL REPAIR WORKS OF BUILDINGS AT SUNJUWAN UNDER GE JAMMU

Amount

B/R Portion:- Taking down shutters of any description exc. 1 Sqm but n.exc. 2 Sqm each and removing from site complete all as specified and as directed.

Taking down chowkats or frames with shutters exc. 1.5 Sqm and n.exc 4 Sqm each (without taking off shutters from the frame) including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts and and removing from site complete all as specified and as directed.

Taking down chowkats or frames with shutters not exc. 1.5 Sqm each (without taking off shutters from the frame) including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts and and removing from site complete all as specified and as directed.

Taking down door and refixing shutters after making necessary repair of any description exc.1 Sqm but n.exc. 2 Sqm each complete all as specified and as directed.

M&L pressed steel frames made of 1.25mm thick MS sheet of profile 125 X 60 mm for doors with one or more rebates including necessary lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, holdfasts / lugs etc complete all as specified and as directed.

M&L pressed steel frames made of 1.25mm thick MS sheet of profile 105 X 60 mm for doors with one or more rebates including necessary lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, holdfasts / lugs etc complete all as specified and as directed.

M&L cement concrete (1:3:6) type C-0 (using 12.5mm graded crushed stone aggregate) as in filling of chowkhats, hold fasts, blocks etc including necessary form work complete all as specified and as directed.

S&F 35mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part - I, section 8, clause 8.24 (a) complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter, with particle board core, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing complete all as specified and as directed.

S & F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube complete all as specified and directed.

S&F Box type steel windows / ventilator comprised of tubular frame and shutters made out of 1.25mm thick MS sheet tube factory made with double side shutters wire gauged shutter and glass glazed shutter (wire cloth and glass panes will be measured and paid separately) with side hung shutters with MS handles and MS peg stay dovetailed or welded including 02 No's MS Tower bolts 150mm long for each leaf and 08mm square bar grill / guard bars at spacing as shown on Drg welded MS flat iron frame work, including other fittings, hinges, MS handles, tarred hold fasts, PCC blocks for hold fasts and AC opening if required including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for framed work such as grills, grating, etc with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, cupboard chowkhat / frame and similar work conforming to Fe 410-0 or Fe-310 complete all as specified and as directed.

S & F Mild Steel powder coated colour decorative type drapery rod of 20mm dia approved pattern & design including decorative knobs (02 x No for each opening) & powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs / grips complete all as specified and as directed.

Supply and fixing galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square pane complete all as specified and as directed.

S&F 3mm thick sheet glass figured, pin head type and glazing with oil putty or wooden beads, in squares each pane complete all as specified and as directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type), not less than 12mm dia and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy including necessary nuts and bolts complete all as specified and as directed.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section (ISI marked) complete all as specified and as directed.

S&F 100mm long butt hinges, medium weight cold rolled mild steel (ISI marked) complete all as specified and as directed.

S&F 140mm size (overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S&F mild steel 300mm rat rail spring including roller plate complete all as specified and as directed.

S&F 150mm long aluminium handle extruded alloy, fabricated 'D' type anodised complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of pink wood primer complete all as specified and as directed.

M&L preparation of old wooden or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

M&L preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L preparation of old painted steel surfaces of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge.

Dismantling boarding, any description, fixed in any position with nails etc complete all as specified and as directed.

Supply and fixing in repairs prelaminated particle board, 18/19mm thick, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including fixing of TW beading on open edges of particle board complete all as specified and as directed.

S&F hasp and staple 100mm long, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S&F in repairs stainless steel plate rack 1.25mm thick of size 900 X 775 X 250mm including angle iron brackets and taking down of 19mm thick particle board shelf and removal from site complete all as specified and as directed.

Taking down cement plaster / wall tiles from concrete / stone surfaces including raking out joints, hacking for key, scrubbing down with water etc and its removal from site complete all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:6 finished even and smooth without using extra cement (internal plaster) complete all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:4, finished even and smooth without using extra cement (external plaster) with WPC complete all as specified and as directed. Note : WPC shall be paid separately.

M&L for 5 mm thick plaster on ceiling in cement mortar (1:3) finished even and smooth without using extra cement complete all as specified and as directed.

M&L for two coats of oil bound distemper on new surfaces including preparation of surfaces of walls including one coat of chalk whiting complete all as specified and as directed.

M&L preparation of old decorated surface of wall by brooming down and scrapping wherever necessary and applying one coat of oil bound distemper over a coat of wall putty wherever necessary complete all as specified and as directed.

M&L for preparation of newly plastered surfaces and applying two coats of white wash on walls complete all as specified and as directed.

M&L preparation of old decorated surfaces of ceiling and applying two coats of white wash complete all as specified and as directed.

M&L preparation of newly plastered surfaces of wall, soffits / facia etc and applying two coats of exterior emulsion paint over a coat of wall care putty complete all as specified and as directed.

M&L preparation of old decorated surfaces of walls, soffits / facia of chajja / roof slab etc and applying one coat of exterior emulsion paint over a coat of wall care putty complete all as specified and as directed by Engr-in-Charge.

M&L preparing plastered or unplastered new surfaces of ceilings and applying three coats of white wash complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

S&F vitrified ceramic tiles 10mm thick (Square / rectangular) polished, light shade, area of each tiles not exceeding 0.36 Sqm, in floors, dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

S&F coloured non skid ceramic tiles 7 to 8mm thick (Square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM (1:4) complete all as specified and as directed.

S&F coloured Glazed ceramic tiles in vertical surface 350 x 250 x 7mm / 450 X 350 X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M&L machine cut Kota stone 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rounding of open edge, rubbing and polishing complete (mirror face) as in floor, stair step over 20 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L granite 15 to 18 mm thick (Pure black) (table rubbed and polished) as in steps, jambs, pillars, window cills cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed in CM 1:4 edges of slab to be rounded from all sides (including cutting and polishing) complete all as specified and as directed.

Taking down 15 mm bore galvanized steel water tubing with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Taking down 20 mm bore galvanized steel water tubing with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F 15 mm bore medium grade galvanized steel water tubing with all fittings fixed complete to walls and ceilings or laid on floors complete all as specified and as directed.

S&F 20 mm bore medium grade galvanized steel water tubing with all fittings fixed complete to walls and ceilings or laid on floors complete all as specified and as directed.

Re-fixing old steel tubing and connections in new or old position of 15 mm bore of pipe (walls, ceiling or floor etc) complete all as specified and as directed.

Re-fixing old steel tubing and connections in new or old position of 20 mm bore of pipe (walls, ceiling or floor etc) complete all as specified and as directed.

S&F in repair 15mm bore stop valves, cast copper alloy (ISI marked) screwed down, high pressure with crutch or butterfly handle, screwed both ends (externally threaded) for iron pipe or for unions complete all as specified and as directed.

S&F in repair 20mm bore stop valves, cast copper alloy (ISI marked) screwed down, high pressure with crutch or butterfly handle, screwed both ends (externally threaded) for iron pipe or for unions complete all as specified and as directed.

S&F in repair angle valves CP screwed both ends for 15mm bore of iron pipe or for union and fixed complete all as specified and directed.

S&F in repairs Vitreous china squatting pan 'Orissa' pattern, size 580 x 440mm white, with integral foot rests complete including provision of time concrete bedding, including connection to 'P' or 'S' trap and to flushing pipe, anti-syphonage pipe, etc. including making good to floor complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC low level flushing cistern, 10 litre capacity, symphonic action type, white inlet valve, float, handle, including brackets, 15mm PVC connection 600mm long and 32mm dia PVC flushing pipe including fixing of long screws chromium plated complete all as specified and directed.

S&F in repairs Vitreous china wash down water closet pan (EWC / long pan / pedestal pattern) white in colour including seat cover, closed pattern, flat bottom and mild steel chromium plated hinging device complete all as specified and directed.

S&F in repairs wash hand basin 550 X 400mm vitreous china (white) with cantilever CI / Angle iron brackets embedded in concrete block including brass chromium plated waste coupling 32mm bore, waste pipe PVC 32mm bore complete all as specified and directed.

S&F in repairs brass chromium plated mixer for mixing hot and cold water screwed down for 15mm for iron pipe for WHB or wall mounted etc sample kept at GE office complete all as specified and directed.

S&F in repairs stop valves CP with long shank and cup (concealed type), screwed both ends for 15mm bore of iron pipe or for union and fixed complete all as specified and directed.

S&F in repair CP shower rose with swivel joints brass chromium plated 125mm size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs CP brass tubular towel rail fancy type 600mm long fixed with CP brass screws complete all as specified and directed.

S&F in repairs ISI marked 1000 Litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part - I including PTMT Ball valves 20mm bore, high pressure with epoxy coated aluminium rod and high density plastic ball etc complete all as specified and as directed.

S&F in repairs stainless steel sink with drainage board, made of 1.00 mm thick sheet for kitchen or laboratory with plug, washers waste pipe including bedding in cement mortar to dwarf wall or including fixing cast iron, cantilever brackets, connecting union to pipe, overall size 915mm x 460mm, bowl size (410 x 330 x 160mm) complete all as specified and as directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S&F in repair bib taps, long body, fancy type CP, screwed for 15mm bore of iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Dismantling of 75mm and 100mm dia PVC / cast iron pipes, jointed in cement mortar or lead joints and taking out of trenches if required complete all as specified and as directed.

S&F PVC (SWR) pipe 100mm dia and vent pipe in any length with or without ears with cement joints laid in trenches or in floors or fixed to walls complete all as specified and as directed.

Description same as per Ser Item No 71.00 here-in-before but fixing only complete all as specified and as directed.

S&F PVC (SWR) pipe 75mm dia and vent pipe in any length with or without ears with cement joints laid in trenches or in floors or fixed to walls complete all as specified and as directed.

Description same as per Ser Item No 73.00 here-in-before but fixing only complete all as specified and as directed.

S&F PVC (SWR) pipe 50mm dia and vent pipe in any length with or without ears with cement joints laid in trenches or in floors or fixed to walls complete all as specified and as directed.

M&L in repair PVC (SWR) bends (any radius), diminishing pieces or tappers of pipe 100mm bore complete all as specified and as directed.

M&L in repair PVC (SWR) bends (any radius), diminishing pieces or tappers of pipe 75mm bore complete all as specified and as directed.

S&F in repair 100mm PVC (SWR) bends with access door, with (ordinary or inverted) spigot with parallel branches with single (Y) laid in trenches or fixed to walls complete all as specified and as directed.

Demoltion of brick work built in cement mortar or cement lime mortar complete all as specified and as directed.

M&L brick work with sub class 'B' bricks, using old size bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 complete all as specified and as directed.

M&L for 50mm thick PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection, concrete shall be laid in alternate bays not exceeding 3m in length, finished fair and even complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removing from site complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth, for foundation, etc., or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5m in depth and getting out in soft / loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and as directed.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

M&L mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending, spirally to hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Description same as per Ser Item No 86.00 here-in-before but 5mm dia and over upto and including 10mm dia as in Binders, stirrups, spacer complete all as specified and as directed.

M&L for reinforced cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in foundation, including fafts, footing, foundation beams, plinth beams, bases for columns etc basement slabs, under reamed piles and mass concrete, manhole cover slab etc complete all as specified and as directed.

M&L for RCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L in repair PVC (SWR) floor trap with steel grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 of outlet in 100mm complete all as specified and as directed.

M&L for PVC cowls for 75mm bore of pipe complete all as specified and as directed.

M&L in repair for PVC (SWR) floor trap 63mm dia for WHB, including 40mm dia HDPE pipe upto the trap of bathroom and jointing with solvent with outlet pipes, stainless steel grating etc fixed in repairs complete all as specified and as directed.

S&F in repair PVC (SWR) pipes, 110mm bore, single socketed in any length with rubber joints, fixed to walls complete including fixing clamps etc with nut and bolts including taking down of pipe complete all as specified and as directed.

S&F PVC (SWR) bend / shoe 110mm bore, fixed to pipes complete including fixing clamps etc with nut and bolts complete all as specified and as directed.

Supply and fixing in repair mirror cabinet in PTMT alloy size 450 X 350mm and fixed complete all as specified and as directed.

M&L cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) 25mm thick in floors, roof etc complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

M&L cement concrete 1:5:10 (using 40mm size coarse aggregate) as in mass filling in sunken floor of toilets complete all as specified and as directed.

M&L Rendering 15mm thick in cement sand mortar 1:4 mixed with and including liquid integral water proofing compound 0.20 Ltr per 50 kg bag of cement both on floor and wall after proper curing and drying and apply Epoxy Resins coating polymer modified cementation coating like Brush Bond of Fosroc Pedilite and Bostic as per manufacturer's instructions both on floor as well as on walls of sunken floors complete all as specified and as directed by Engr-in-charge.

M&L for rendering 20mm thick in CM 1:4 on concrete surfaces (on roof slab) finished even and smooth without using extra cement, mixing liquid water proofing compound complete all as specified and as directed. Note: - Liquid water proofing ompound shall be measured and paid separately.

Cleaning and removing loose / dirt materials from the roof surfaces and applying bitumen primer @ 0.30 litre / Sqm, providing and laying 3mm thick APP modified water proofing membrane weighing not less than 3.5 Kg / Sqm reinforced with non woven polyster mat weighing not less than 160 gm / Sqm, having softening point not less than 800 N / Sq cm, tearing strength of 180N, with minimum of 10 cm side laps and 15cm end laps, laying by application of torch and applying two coats of aluminium paint complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

M&L for RCC 1:1.5:3 type A-1 (using 20mm graded crushed stone aggregate) as in beams, cantilevers, lintels over 1.5m span complete all as specified and as directed.

M&L for RCC 1:1.5:3 type A-1 (using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, manhole cover and in shelves and the like complete all as specified and as directed.

Use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n. exc. 200 mm thick, rough finished surface of concrete complete all as specified and as directed.

Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support of rough finished surfaces complete all as specified and as directed.

M&L half brick thick brick work with sub class "B" bricks straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and as directed.

M&L applying two coats of cement based paint over one coat of cement primer on newly plastered surfaces of wall including preparation of surface complete all as specified and as directed.

M&L broken stone hard core of gauge n.exc. 63mm deposited, spread and levelled in layers n.exc. 15cm thick, watered and rolled / rammed to a true surface complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part - II 2020 and as directed by GE / Egnineer-in-Charge.

S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm including brass check nut at both ends screwed for iron pipe complete all as specified and directed.

S&F in repair pillar tap 15mm dia cast copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe fixed complete all as specified and as directed.

S&F in repair vitreous china wash hand basin white, flat back of size 450mm X 300mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling including fixing of tap, waste fitting 32mm dia PVC waste pipe etc complete all as specified and as directed.

S&F in reapir fancy type stop valve cast copper chromium plated concealed type screwed down high pressure with capstan head suitable for 15mm bore complete all as specified and as directed.

S&F stainless steel gratings of outer frame dia 150 mm openable type including all necessary fittings such as hinges including embedding in tiles with white cement complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 75mm bore single socketed in any length wth rubber ring joint fixed to wall or laid in trenches or in floors with steel clamps complete all as specified and as directed.

S&F soap dish fixed with and including chromium plated brass screws and wooden / plastic cleats complete all as specified and as directed.

Supplying, fixing, jointing and testing galvanised steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors, complete for 25mm dia bore complete all as specified and as directed.

S&F in repair rotational moulded polyethylene water storage tanks of capacity 500 litres, (cylindrical vertical with closed top) hoisted and fixed in position including necessary check nuts and washer and 20mm dia PTMT ball valve complete all as specified and as directed.

Cutting chases for concealed water tubing or concealed conduit and making good in CM 1.3 of girth exc 10 cm and n.exe. 20 cm in brick wall complete all as specified and as directed.

M&L cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) concrete bed to drain pipes 150mm dia including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

M&L Salt glazed stoneware drain pipes of bore 150 mm dia grade 'A' laid in trenches in concrete bedding and jointed complete in CM 1:1 all as specified and directed.

Septic tank for 10 users, Single Chamber (Brick construction) with top of slab at ground level including necessary excavation and earth work in any type of soil and disposal of surplus soil to a distance not exceeding 50 metres, vent pipe, supplying and fixing manhole covers with angle iron welded frame complete all as specified and shown in Drg No CE/TD-1202/03 dated 09 Oct 2003 revised on 21 Oct 2003 Sheet 1/2 and CE/TD-1202/03 dated 09 Oct 2003 Sheet 2/2 complete all as specified and as directed by Engr-in-Charge.

Soakage well 2.4 metre dia and 3.00 metre deep below inlet pipe level (depth from inlet pipe to ground level 45 cm) including excavation and earth work in any type of soil filled with brick bats, RCC slab with RCC manhole cover fixed in angle iron frame, SWG single junction inlet, filling around slab in slopes and disposal of surplus soil to a distance exceeding n.exc. 50m complete all as specified and shown in Drg No CE/TD-1202/03 dated 09 Oct 2003 revised on 21 Oct 2003 Sheet 1/2 and CE/TD-1202/03 dated 09 Oct 2003 Sheet 2/2 complete all as specified and as directed by Engr in Charge.

S&F Aluminium door shutter (Double of single leaf) with frame made out of aluminium section of size 83 X 44 X 1.5mm in frame, style, top and bottom rail using section 114 X 44 X 1.5mm including 5mm thick float glass panes of modi fixed with heavy duty aluminium clips at top panel neoprin rubber gasket, angle cleats etc complete with heavy duty floor door closer, aluminium handle approved shape 2 No's, aluminium tower bolt 200mm size 01 No's, 4 lever lock of approved manufacturer, complete with cost of all materials, labour, T&P, wastage, including making good existing surfaces disturbed during taking of old chowkat etc, section size may vary as per availability but weight should not be less than 1.3 Kg / RM for frames and styles including powder coating of approved colour complete all as specified and as directed. Note: - Thickness of powder coating not less than 50 micron.

M&L 100mm thick cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) complete all as specified and as directed.

M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L machine pressed precast cement concrete interlocking paver block with white grey cement with pigments of any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade complete all as specified and as directed.

S&F in repair Vitreous china urinals half stall type, white, complete including providing and fixing plugs, bedding urinal againt wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement with grating and union for discharge pipe, including PVC waste pipe 32mm of suitable length, PTMT waste coupling 32mm dia suitable for urinals, PVC connection 15 X 450mm long, CP urinal spreader, 15mm angle valve fancy type chromium plated complete all as specified and as directed by Engr-in-Charge.

Supply and fixing in repair Jet spray with 1.00m tube complete all as specified and as directed.

S&F in repair CP brass health faucet with 1.0 mtr tube and hook (braided tube) complete all as specified and as directed.

S&F grating doom 100mm dia of PTMT (minimum weight 25 gms) complete all as specified and as directed.

M&L in repair for Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws box type complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

S&F in repair cast iron 100mm dia bore pipe, branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

S&F in repair cast iron 75mm dia bore pipe, branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

S&F in repair cast iron 100mm dia bore pipe, branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

S&F in repair cast iron 75mm dia bore pipe, branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.

S&F in repair 100mm dia cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repair 75mm dia cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and as directed.

S&F in repair 100mm dia cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, with cement joints, fixed to walls complete all as specified and as directed.

S&F in repair 75mm dia cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, with cement joints, fixed to walls complete all as specified and as directed.

Removing existing treatment from roof surfaces such as tilin, tarfelt, fungs moss, dust etc cleaning the RCC roof surface wire brushing complete all as specified and as directed.

E/M Portion:- Dismantling and taking down carefully existing copper / aluminium point wiring for light / fan / bell / socket 5/15 Amp points complete with fitting and fixtures such as switches, sockets, ceiling roses, holders and bracket fittings with battens / conduits / wires and making good the disturbed surfaces of walls and roofs etc and to match with existing colour complete all as specified and as directed.

Taking down carefully old unserviceable sub main wiring of any size of two core including earth wire complete including batten / conduit and make good the disturbed surface to match the existing surface complete all as specified and as directed by Engineer-in-Charge.

M&L for point wiring complete with 1100 Volts grade PVC insulated unsheathed cable of copper conductor (FRLS) multi stranded of size 1.5 Sqmm, single core, in and including continuous earth wire of size 1.5 Sqmm unsheathed stranded copper conductor (FRLS) with green PVC insulation connected to common earth dolly drawn into rigid non-metallic PVC concealed conduit, medium grade of suitable size (not less than 20mm dia) duly ISI marked wih all accessories such as bends, reducers, spacers, saddles, junction boxes, bakelite sheets, PVC rectangular boards / round blocks (for housing lamp holders and sketch fittings etc) including cutting chases for conduit and sinking's for boxes and providing MS concealed terminal boxes made of MS sheet with 3mm thick plastic laminated bakelite (Hylum) sheet to cover for mounting switches / bell pushes / sockets / fan regulators etc complete all as specified and as directed.

One light point/fan point/bell point controlled by one switch complete all as specified and as directed.

One 5 Amps 3/5 pin socket outlet on the same board with other switch complete all as specified and directed by Engr-in-charge.

One 5 Amps 3/5 pin socket outlet on the independent board with other switch complete all as specified and directed by Engr-in-charge.

Description same as per Ser item No 146.00 here-in-before but wiring with 2.5 Sqmm copper cable with 1.5 Sqmm copper cable as continuous earth wire for 5/6 pin 16 Amps socket outlt on independent board with other switch complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repair only switch piano flush button type 05 Amp single pole, one way complete all as specified and as directed.

Supply and fixing in repair only switch piano flush button type 15 Amps single pole, one way complete all as specified and as directed.

S&F in repair only socket outlet multi purpose 3 pin 2 pin 05 Amp flush type complete all as specified and directed.

S&F in repair only socket outlet multi purpose 6 pin and 3 pin, 15 Amp flush type complete all as specified and directed.

S&F in repair ceiling rose surface bakelite 2 to 3 terminals PVC/Poly carbonate/Isolated body 65 x 50 mm size complete all as specified and directed.

S&F in repair only fan regulator resistance type and making all necessary connection to the regulator complete all as specified and directed.

Supply and fixing in repair only bell push flush type 5 Amps complete all as specified and directed.

Supply and fixing in repair bell AC 230V single pole complete all as specified and as directed.

S&F in repair lamp holder insulated body threaded dome pattern, suitable for bracket / batten fitting complete all as specified and directed including LED Bulb 9 watt. Make: - Havells / EON / C&S

S&F in repair Energy efficient endura linear LED wall mounted LED tube light batten fitting, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver 18-20 watt LED 6K (4 ft long), 230 Volts 50 Hz complete all as specified and directed. Make: - Havells / C&S / Crompton

S&F in repair Energy efficient wall mounted LED tube light batten fitting, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver 10 watt LED 6K (2 ft long), 230 Volts 50 Hz complete all as specified and directed. Make: - Havells / C&S / Crompton

S&F in repair LED Bulk head fitting of capacity 10 watt Aluminium PDC housing, toughened glass cover with IP 65 protection complete all as specified and directed by Engr-in-charge.

S&F in repair DB sheet metal enclosures double door, factory made, made out of CRCA mild steel sheet of 1.2mm thick with metallic painting, FP-42 protection surface mounting 240 Volts, 200 Amp rated enamelled neutral bus bar 8 way dust and vermin proof suitable for incorporation of Isolator / MCB's, duly concealed in wall and making good the disturbed surface and colour matching complete all as specified and directed. Make: - Havells / Legrand / ABB

S&F in repair MCB single pole 240 volts, 06 to 40 Amps, "B" series, 10 KA complete all as specified and as directed. Make: - Havells / Legrand / ABB

S&F in repair MCB single pole neutral 240 volts, 40Amps, "B" series, 10 KA complete all as specified and as directed. Make: - Havells / Legrand / ABB

M&L for sub main wiring with two single core 04 Sqmm PVC insulated and unsheathed multistranded copper conductor (FRLS) along with earth wire 4 Sqmm multistranded copper conductor (FRLS) as continuous earth wire drawn in and including 25mm dia PVC rigid conduit ISI marked with all fittings like junction box, tee bend, elbow reducers and accessories such as coupler, lock nuts, saddles, pipe hook etc with all fittings complete all as specified and directed. Note: - Two number cable and one number earth wire shall be measured together as unit length.

Supply and draw sub main wiring in pairs of two run 6.0 Sqmm single core PVC insulated, unsheathed multistranded copper conductor cable 1100 Volts grade, drawn through and including PVC conduit medium duty and accessories of 25mm size and fixed with PVC saddles and cadmium plated steel screws to the surfaces of the wall / ceiling including one run of 4 Sqmm single core PVC insulated unsheathed copper earth continuity conductor complete all as specified and directed. Note: - Two runs of single core cable with one run of earth continuity conductor including PVC conduit accessories shall be measured and paid as one length.

S&F in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed.

S&F in repair MCCB with thermal based release 3 pole MCCB 125 Amps, 50 Hz, 415 Volts with rupturing capacity 35 KA complete all as specified and directed.

S&F in repair MCB SPN 63 amps 415 volt complete all as specified and as directed.

Taking down old and unserviceable, distribution board any type including MCB's etc after removing all connection and make good the disturbed surface complete all as specified and directed by Engineer-in-Charge.

M&L in replacement Self ballast LED retrofit lamp with PVC body and PC Diffuser 9 watt 230 Volt 6500K complete all as specified and directed.

S&F in repair DB sheet metal enclosures double door, factory made, made out of CRCA mild steel sheet of 1.2mm thick with metallic painting, FP-42 protection surface mounting 240 Volts, 200 Amp rated enamelled neutral bus bar 4 way dust and vermin proof suitable for incorporation of Isolator / MCB's, duly concealed in wall and making good the disturbed surface and colour matching complete all as specified and directed. Make: - Havells / Legrand / ABB

M&L for point wiring controlled by one 5 Amp switch with 1.5 Sqmm single core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 Sqmm copper conductor, multistranded FRLS, PVC insulated (unsheathed) drawn into existing concealed PVC rigid / steel conduit 1.8mm wall thickness ISI marked terminated into existing CI / pressed steel terminal boxes including 3.00mm thick hylum brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc complete all as specified and as directed. Note: - (a) Wiring shall be done by using proper colour coding. (b) Earth wire shall be of green colour. (c) On RCC roof / ceiling PVC conduit shall be provided on surface with proper fixing clips all as directed by Engr-in-Charge.

One light point/fan point/bell point controlled by one switch complete all as specified and as directed.

One 5 Amps 3/5 pin socket outlet on the same board with other switch complete all as specified and directed by Engr-in-charge.

Description same as per Ser Item No 171.00 here-in-before but wiring with 2.5 Sqmm copper cable with 1.5 Sqmm copper cable as continuous earth wire for 5/6 pin 16 Amps socket outlet on independent board with other switch complete all as specified and directed by Engr-in-charge.

Taking down Exhaust fan, sealing cable end, dismantling blades and removing fan and blade to store of safe place of contractor for refixing after repair and painting of Bldg complete all as specified and as directed.

Rewinding of Exhaust fan, of any make / type and size with super enamelled copper wire of appropriate gauge as existing to obtain the specified and satisfactory RPM as per manufacturer's specification, including replacement of all insulation materials, varnishing, heating, drying, assembling of stator / rotor, connection and testing complete all as specified and as directed.

Supply and fixing in repair ball bearing of any size and type, suitable for any type / make / size of Exhaust fan complete all as specified and as directed.

Supply, fixing in replacement of capacitor 230 Volt AC 50 Hz, conforming to IS-1709 and rated capacity 4.0 MFD for Exhaust Fan complete all as specified and as directed.

Supply and fixing in replacement of louver shutter made of MS sheet metal 1.2 mm thick for round base and 0.8 mm thick for flaps, comprising of mounting legs frames made of MS flat strips of size 25mm x 3mm including heavy duty rust proof passivated bolts of size 50 mm long 8 mm dia to be fixed on wall complete with using fastener bolt, drilling and duly painted by two coats of synthetic enamel paint (spray painting) over a coat of primer for exhaust fan up to 400 mm sweep including taking down old one complete all as specified and as directed.

Hanging only Exhaust fan connecting up including provision of cable from ceiling rose or connector to fan and rubber reel etc complete all as specified and as directed by Engineer-in-Charge.

Supply and fix exhaust fan, steel body AC single phase, 230V of size 450mm sweep with, blades and frame and louvers complete all as specified and as directed.

M & L in repair of Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of earth plate not less than 1.5 metres below ground level, connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nuts, bolts, check nuts and washers of galvanised iron or steel including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with suitable handle made of round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specified and directed.

M/S LANGER CONSTRUCTION COMPANY

M/S GH MOHAMMAD DAR

M/S RAVINDER SINGH

M/S BALWAN SINGH

NARESH KUMAR AND COMPANY

M/S TRIKUTA BUILDERS

M/S PARAMJEET SINGH

Bidder Name

M/S TRIKUTA BUILDERS

M/S RAVINDER SINGH

M/S PARAMJEET SINGH

M/S PRITHIVI RAJ AND SONS

NARESH KUMAR AND COMPANY

M/S GH MOHAMMAD DAR

M/S BALWAN SINGH

M/S LANGER CONSTRUCTION COMPANY